Welcome to DVSwitch
DVSwitch is a set of tools and programs related to provisioning and operating Amateur Radio digital voice networks.
Purpose
The purpose of DVSwitch is as follows:
1) Allows “local” networking during an outage of the regional national/international network server.
2) Allows a local network operator to “blend” upstream feeds from different Networks (capital N on purpose). These Networks can’t get their act together and learn how to play nice with each other (everyone guilty as far as we are concerned). They may not like people doing this, but the solution is to grow up and work with each other, and not keep trying to force people to take sides.
3) Allows local segregation of localized traffic with more flexibility.
4) Allows experimentation with linking and how it’s done (part 97 specifies experimentation and advancement of the radio art are a core part of amateur radio).
1) Allows “local” networking during an outage of the regional national/international network server.
2) Allows a local network operator to “blend” upstream feeds from different Networks (capital N on purpose). These Networks can’t get their act together and learn how to play nice with each other (everyone guilty as far as we are concerned). They may not like people doing this, but the solution is to grow up and work with each other, and not keep trying to force people to take sides.
3) Allows local segregation of localized traffic with more flexibility.
4) Allows experimentation with linking and how it’s done (part 97 specifies experimentation and advancement of the radio art are a core part of amateur radio).
Mission Statement/Position
Our stated position is:
WHEREAS the Networks continue to be largely islands and are not working together to create a unified network of Networks.
WHEREAS no firm reason has been given by any of the Networks why a *competent* local network operator cannot make this work effectively.
(US ONLY)
WHEREAS 47 CFR 97 (Amateur Radio Service) specifies that a core component of amateur radio is experimentation and advancement of the radio art [97.1(b)].
BE IT RESOLVED the core group of US amateur radio operators and experimenters organized around the DVSwitch project, and in the spirit of USA 47 CFR 97 and its intentions, support the *responsible* and *thoughtful* use of digital voice networking tools to create localized networks that will interconnect to the national/international Networks, and will support users of its tools in order to do this in the most effective and sustainable way possible.
WHEREAS the Networks continue to be largely islands and are not working together to create a unified network of Networks.
WHEREAS no firm reason has been given by any of the Networks why a *competent* local network operator cannot make this work effectively.
(US ONLY)
WHEREAS 47 CFR 97 (Amateur Radio Service) specifies that a core component of amateur radio is experimentation and advancement of the radio art [97.1(b)].
BE IT RESOLVED the core group of US amateur radio operators and experimenters organized around the DVSwitch project, and in the spirit of USA 47 CFR 97 and its intentions, support the *responsible* and *thoughtful* use of digital voice networking tools to create localized networks that will interconnect to the national/international Networks, and will support users of its tools in order to do this in the most effective and sustainable way possible.
|
Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ?
#mmdvm_bridge
Tito Lopez - YN1OB
So what is it that you need?
On Thu, Apr 16, 2020 at 12:52 PM Steve N4IRS <szingman@...> wrote:
|
|
|
|
Re: Can you have several instances of Dvswicth running in different folders with the dvswitch.sh?
ea7jcl@...
I think function getABInfoFileName is the key.
Cheers.
|
|
|
|
Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ?
#mmdvm_bridge
Analog_Bridge is not used in a DMR to YSFn bridge.
toggle quoted messageShow quoted text
On 4/16/2020 2:38 PM, Tito Lopez wrote:
Here is my Analog_Bridge Log
|
|
|
|
Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ?
#mmdvm_bridge
Tito Lopez - YN1OB
Here is my Analog_Bridge Log
I: 2020-04-16 18:30:52.292 Analog_Bridge is starting
M: 2020-04-16 18:30:52.294 Setting [MACROS] DMR -> /opt/Analog_Bridge/dvswitch.sh mode DMR
M: 2020-04-16 18:30:52.294 Setting [MACROS] DSTAR -> /opt/Analog_Bridge/dvswitch.sh mode DSTAR
M: 2020-04-16 18:30:52.294 Setting [MACROS] NXDN -> /opt/Analog_Bridge/dvswitch.sh mode NXDN
M: 2020-04-16 18:30:52.294 Setting [MACROS] P25 -> /opt/Analog_Bridge/dvswitch.sh mode P25
M: 2020-04-16 18:30:52.294 Setting [MACROS] YSF -> /opt/Analog_Bridge/dvswitch.sh mode YSF
M: 2020-04-16 18:30:52.294 Setting [MACROS] dbupdate -> /opt/Analog_Bridge/dvswitch.sh collectProcessPushDataFiles
M: 2020-04-16 18:30:52.294 Setting [MACROS] 9876 -> /opt/Analog_Bridge/parrot.sh
M: 2020-04-16 18:30:52.294 Setting [] include -> dvsm.macro
M: 2020-04-16 18:30:52.294 Setting [GENERAL] logLevel -> 2
M: 2020-04-16 18:30:52.294 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2020-04-16 18:30:52.294 Setting [GENERAL] exportMetadata -> true
M: 2020-04-16 18:30:52.294 Setting [GENERAL] decoderFallBack -> true
M: 2020-04-16 18:30:52.294 Setting [GENERAL] useEmulator -> true
M: 2020-04-16 18:30:52.294 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2020-04-16 18:30:52.294 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2020-04-16 18:30:52.294 Setting [AMBE_AUDIO] txPort -> 31103
M: 2020-04-16 18:30:52.294 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2020-04-16 18:30:52.294 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2020-04-16 18:30:52.294 Setting [AMBE_AUDIO] minTxTimeMS -> 2500
M: 2020-04-16 18:30:52.294 Setting [AMBE_AUDIO] gatewayDmrId -> 7101003
M: 2020-04-16 18:30:52.294 Setting [AMBE_AUDIO] repeaterID -> 710100306
M: 2020-04-16 18:30:52.294 Setting [AMBE_AUDIO] txTg -> 710411
M: 2020-04-16 18:30:52.294 Setting [AMBE_AUDIO] txTs -> 2
M: 2020-04-16 18:30:52.294 Setting [AMBE_AUDIO] colorCode -> 1
M: 2020-04-16 18:30:52.294 Setting [USRP] address -> 127.0.0.1
M: 2020-04-16 18:30:52.294 Setting [USRP] txPort -> 32001
M: 2020-04-16 18:30:52.294 Setting [USRP] rxPort -> 34001
M: 2020-04-16 18:30:52.294 Setting [USRP] usrpAudio -> AUDIO_USE_GAIN
M: 2020-04-16 18:30:52.294 Setting [USRP] usrpGain -> .8
M: 2020-04-16 18:30:52.294 Setting [USRP] tlvAudio -> AUDIO_USE_GAIN
M: 2020-04-16 18:30:52.294 Setting [USRP] tlvGain -> 0.25
M: 2020-04-16 18:30:52.294 Setting [DV3000] address -> 127.0.0.1
M: 2020-04-16 18:30:52.294 Setting [DV3000] rxPort -> 2460
I: 2020-04-16 18:30:52.294 Open UDP listener on 127.0.0.1:31100
I: 2020-04-16 18:30:52.294 Open USRP on 127.0.0.1:32001
M: 2020-04-16 18:30:52.294 Connecting to DV3000 hardware......
W: 2020-04-16 18:30:53.325 DV3000 not found at 127.0.0.1:2460
I: 2020-04-16 18:30:53.326 Subscriber IDs loaded: 0
I: 2020-04-16 18:30:53.326 Default extended metadata <7101003>
I: 2020-04-16 18:30:53.326 Connecting to emulator on host 127.0.0.1:2470
W: 2020-04-16 18:30:53.326 Using software MBE decoder version 1.2.3
W: 2020-04-16 18:30:53.326 Using software OP25 IMBE/AMBE vocoder
I: 2020-04-16 18:30:53.326 Connected to USRP 127.0.0.1:32001
I: 2020-04-16 18:30:53.326 Starting TLV --> Analog_Bridge (decoder) --> USRP thread
I: 2020-04-16 18:30:53.327 Starting USRP --> Analog_Bridge (encoder) -> TLV thread
==================================================================================== MMDVM_Bridge Log I: 2020-04-16 18:30:52.278 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2020-04-16 18:30:52.278 Hacks by Mike N4IRR and Steve N4IRS
I: 2020-04-16 18:30:52.278 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2020-04-16 18:30:52.278 This software is for use on amateur radio networks only,
I: 2020-04-16 18:30:52.278 it is to be used for educational purposes only. Its use on
I: 2020-04-16 18:30:52.278 commercial networks is strictly prohibited.
I: 2020-04-16 18:30:52.278 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2020-04-16 18:30:52.278 MMDVM_Bridge-20191105_V1.4.1 is starting
M: 2020-04-16 18:30:52.278 Built 14:23:56 Nov 11 2019 (GitID #9dae1ac)
I: 2020-04-16 18:30:52.278 General Parameters
I: 2020-04-16 18:30:52.278 Callsign: YN1OB
I: 2020-04-16 18:30:52.278 Id: 710100306
I: 2020-04-16 18:30:52.278 Duplex: no
I: 2020-04-16 18:30:52.278 Timeout: 180s
I: 2020-04-16 18:30:52.278 D-Star: disabled
I: 2020-04-16 18:30:52.278 DMR: enabled
I: 2020-04-16 18:30:52.278 YSF: enabled
I: 2020-04-16 18:30:52.278 P25: disabled
I: 2020-04-16 18:30:52.278 NXDN: disabled
I: 2020-04-16 18:30:52.278 Modem Parameters
I: 2020-04-16 18:30:52.278 Port: /dev/null
I: 2020-04-16 18:30:52.278 RX Invert: no
I: 2020-04-16 18:30:52.278 TX Invert: no
I: 2020-04-16 18:30:52.278 PTT Invert: no
I: 2020-04-16 18:30:52.278 TX Delay: 100ms
I: 2020-04-16 18:30:52.278 RX Offset: 0Hz
I: 2020-04-16 18:30:52.278 TX Offset: 0Hz
I: 2020-04-16 18:30:52.278 RX DC Offset: 0
I: 2020-04-16 18:30:52.278 TX DC Offset: 0
I: 2020-04-16 18:30:52.278 RF Level: 100.0%
I: 2020-04-16 18:30:52.278 DMR Delay: 0 (0.0ms)
I: 2020-04-16 18:30:52.278 RX Level: 50.0%
I: 2020-04-16 18:30:52.278 CW Id TX Level: 50.0%
I: 2020-04-16 18:30:52.278 D-Star TX Level: 50.0%
I: 2020-04-16 18:30:52.278 DMR TX Level: 50.0%
I: 2020-04-16 18:30:52.278 YSF TX Level: 50.0%
I: 2020-04-16 18:30:52.278 P25 TX Level: 50.0%
I: 2020-04-16 18:30:52.278 NXDN TX Level: 50.0%
I: 2020-04-16 18:30:52.278 RX Frequency: 222340000Hz (222340000Hz)
I: 2020-04-16 18:30:52.278 TX Frequency: 224940000Hz (224940000Hz)
M: 2020-04-16 18:30:52.279 Opening the MMDVM
I: 2020-04-16 18:30:52.279 Display Parameters
I: 2020-04-16 18:30:52.279 Type:
I: 2020-04-16 18:30:52.279 DMR Network Parameters
I: 2020-04-16 18:30:52.279 Address: 74.91.118.251 ;3103.repeater.net
I: 2020-04-16 18:30:52.279 Port: 62031
I: 2020-04-16 18:30:52.279 Local: 62032
I: 2020-04-16 18:30:52.279 Jitter: 360ms
I: 2020-04-16 18:30:52.279 Slot 1: disabled
I: 2020-04-16 18:30:52.279 Slot 2: enabled
I: 2020-04-16 18:30:52.279 Mode Hang: 3s
I: 2020-04-16 18:30:52.279 Info Parameters
I: 2020-04-16 18:30:52.279 Callsign: YN1OB
I: 2020-04-16 18:30:52.279 RX Frequency: 222340000Hz
I: 2020-04-16 18:30:52.279 TX Frequency: 224940000Hz
I: 2020-04-16 18:30:52.279 Power: 1W
I: 2020-04-16 18:30:52.279 Latitude: 41.733299deg N
I: 2020-04-16 18:30:52.279 Longitude: -50.399899deg E
I: 2020-04-16 18:30:52.279 Height: 0m
I: 2020-04-16 18:30:52.279 Location: "Iceberg, North Atlantic"
I: 2020-04-16 18:30:52.279 Description: "MMDVM_Bridge"
I: 2020-04-16 18:30:52.279 URL: "https://groups.io/g/DVSwitch"
M: 2020-04-16 18:30:52.279 DMR, Opening DMR Network
I: 2020-04-16 18:30:52.279 System Fusion Network Parameters
I: 2020-04-16 18:30:52.279 Local Address: 0
I: 2020-04-16 18:30:52.279 Local Port: 3200
I: 2020-04-16 18:30:52.279 Gateway Address: 149.248.2.133
I: 2020-04-16 18:30:52.279 Gateway Port: 42000
I: 2020-04-16 18:30:52.279 Mode Hang: 3s
M: 2020-04-16 18:30:52.279 Opening YSF network connection
I: 2020-04-16 18:30:52.279 RSSI
I: 2020-04-16 18:30:52.279 Mapping File: RSSI.dat
W: 2020-04-16 18:30:52.279 Cannot open the RSSI data file - RSSI.dat
I: 2020-04-16 18:30:52.280 DMR Id Lookups
I: 2020-04-16 18:30:52.280 File: /var/lib/mmdvm/DMRIds.dat
I: 2020-04-16 18:30:52.280 Reload: 24 hours
I: 2020-04-16 18:30:52.589 Loaded 161717 Ids to the DMR callsign lookup table
I: 2020-04-16 18:30:52.589 DMR RF Parameters
I: 2020-04-16 18:30:52.589 Id: 710100306
I: 2020-04-16 18:30:52.589 Color Code: 1
I: 2020-04-16 18:30:52.589 Self Only: no
I: 2020-04-16 18:30:52.589 Embedded LC Only: yes
I: 2020-04-16 18:30:52.589 Dump Talker Alias Data: no
I: 2020-04-16 18:30:52.589 Prefixes: 0
I: 2020-04-16 18:30:52.589 Call Hang: 3s
I: 2020-04-16 18:30:52.589 TX Hang: 3s
I: 2020-04-16 18:30:52.589 Mode Hang: 10s
M: 2020-04-16 18:30:52.589 DMR, Opening INI file: DVSwitch.ini
I: 2020-04-16 18:30:52.589 Started the DMR Id lookup reload thread
M: 2020-04-16 18:30:52.590 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-04-16 18:30:52.590 DMR, Setting [DMR] TXPort -> 31100
M: 2020-04-16 18:30:52.590 DMR, Setting [DMR] RXPort -> 31103
M: 2020-04-16 18:30:52.590 DMR, Setting [DMR] Slot -> 2
M: 2020-04-16 18:30:52.590 DMR, Transmitting on 127.0.0.1:31100 and listening on port 31103. Result = 1
I: 2020-04-16 18:30:52.590 YSF RF Parameters
I: 2020-04-16 18:30:52.590 Low Deviation: no
I: 2020-04-16 18:30:52.590 Remote Gateway: no
I: 2020-04-16 18:30:52.590 Self Only: no
I: 2020-04-16 18:30:52.590 DSQ: no
I: 2020-04-16 18:30:52.590 Mode Hang: 10s
M: 2020-04-16 18:30:52.590 YSF, Opening INI file: DVSwitch.ini
M: 2020-04-16 18:30:52.590 YSF, Setting [YSF] Address -> 127.0.0.1
M: 2020-04-16 18:30:52.590 YSF, Setting [YSF] TXPort -> 31103
M: 2020-04-16 18:30:52.590 YSF, Setting [YSF] RXPort -> 31100
M: 2020-04-16 18:30:52.590 YSF, Setting [YSF] FallbackID -> 3128973
M: 2020-04-16 18:30:52.590 YSF, Setting [YSF] ExportTG -> 710411
M: 2020-04-16 18:30:52.590 YSF, Setting [YSF] Slot -> 2
M: 2020-04-16 18:30:52.590 YSF, Transmitting on 127.0.0.1:31103 and listening on port 31100. Result = 1
M: 2020-04-16 18:30:52.590 MMDVM_Bridge-20191105_V1.4.1 is running
M: 2020-04-16 18:31:02.635 DMR, Logged into the master successfully
|
|
|
|
Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ?
#mmdvm_bridge
I don't know about anyone else, but it's a little hard to
troubleshoot without seeing the logs.
toggle quoted messageShow quoted text
On 4/16/2020 12:56 PM, Tito Lopez
wrote:
Yep I did that just that rebuilt everything a few days ago, I still get no Audio from DMR <--->YSF Reflector. I see traffic but just that
|
|
|
|
Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ?
#mmdvm_bridge
Tito Lopez - YN1OB
Yep I did that just that rebuilt everything a few days ago, I still get no Audio from DMR <--->YSF Reflector. I see traffic but just that
|
|
|
|
Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ?
#mmdvm_bridge
It would have been nice to know what was wrong. Based on what you
posted the config was correct. It would have been nice to see
traffic from both ends.
toggle quoted messageShow quoted text
Steve N4IRS
On 4/16/2020 11:26 AM, Uli wrote:
Thanks everyone,
|
|
|
|
Re: YSF to DMR, specifying talkgroup
In the [YSF] stanza you have export TG and Slot.
toggle quoted messageShow quoted text
[YSF] ExportTG = 1234 ; Which TG to export Slot = 2 ; Export slot
On 4/16/2020 10:26 AM, Patrick Perdue wrote:
Hi:
|
|
|
|
Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ?
#mmdvm_bridge
Uli
Thanks everyone,
I have solved it now. The DVSwitch System Builder was the problem as it didn´t work. I have started from scratch again and only installed the Repo and DVSwitch Now Bridging to BM and back to YSF works fine, the sound is clear and noisefree. The Callsigns are also visble on both ends Uli DJ5UW
|
|
|
|
YSF to DMR, specifying talkgroup
Patrick Perdue
Hi:
Perhaps I'm missing something really obvious here, but when using MMDVM_Bridge to go between a YSF reflector and a DMR master server, how do you specify which DMR talkgroup to use? The only reference I can find in DVSwitch.ini seems to be in the DSTAR section. Thanks and 73 de KE4DYI
|
|
|
|
Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ?
#mmdvm_bridge
Tito Lopez - YN1OB
I have a similar setup like you except mine nodes are in the cloud on two different VPS providers. I made those changes and I see traffic on TG hoseline at BM . I also see traffic in my YSF reflector the problem is that No YSF Audio is heard on either end. DVswitch Mobile on LTE and a hotspot at home. DMR mode on the hotspot is sweet except that YSFaudio cant be heard. YN1OB W3DAW
On Wed, Apr 15, 2020, 06:51 <alecwasserman@...> wrote: Yes double check ysf gateway port. Everything has to match and it will work !
|
|
|
|
Re: Can you have several instances of Dvswicth running in different folders with the dvswitch.sh?
Hi Joaquin. Yes, I think that you have to change the script on the dvswitch.sh. Attached I show you where. I think that you have to point the new folders there. By the way, thank you for your help with my HBlink. Thank you very much.
Carlos KP4CA Puerto Rico
|
|
|
|
Re: Need another set of eyes
#mmdvm_bridge
Have you confirmed via self care in Brandmeister that you are connected and on correct talk group? Just an idea Doug W4DBG
On Wed, Apr 15, 2020 at 8:58 PM Steve N4IRS <szingman@...> wrote:
--
Doug Gooden troytrojan@...
|
|
|
|
Re: Need another set of eyes
#mmdvm_bridge
Thanks for posting the log. Nothing jumps out at me. Can you show me
the log with traffic from both the DMR and YSF networks?
toggle quoted messageShow quoted text
73, Steve N4IRS
On 4/15/20 8:51 PM, wojtek (voyteck)
wrote:
I had a perfectly working bridge between YSF and BM TG. Suddenly it just quit working. Since it is built on Raspberry I figured after a brief investigation that the SD card is about to die. I got new cards and reinstall the whole system. I am running YSF Reflector and Bridge from one Pi.
|
|
|
|
Need another set of eyes
#mmdvm_bridge
I had a perfectly working bridge between YSF and BM TG. Suddenly it just quit working. Since it is built on Raspberry I figured after a brief investigation that the SD card is about to die. I got new cards and reinstall the whole system. I am running YSF Reflector and Bridge from one Pi.
I can see the bridge connecting to the reflector and to BM networks but it is not bridging the networks! I can see on dashboard traffic coming from YSF but not from DMR....everything looks good to my eyes.. HELP :-)
Here is a fresh log from the Bridge.
I: 2020-04-16 00:02:01.662 MMDVM_Bridge-20191105_V1.4.1 exited on receipt of SIGTERM I: 2020-04-16 00:02:23.559 MMDVM_Bridge: I: 2020-04-16 00:02:23.559 Portions Copyright (C) 2018 DVSwitch, INAD. I: 2020-04-16 00:02:23.559 Hacks by Mike N4IRR and Steve N4IRS I: 2020-04-16 00:02:23.559 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=- I: 2020-04-16 00:02:23.559 This software is for use on amateur radio networks only, I: 2020-04-16 00:02:23.560 it is to be used for educational purposes only. Its use on I: 2020-04-16 00:02:23.560 commercial networks is strictly prohibited. I: 2020-04-16 00:02:23.560 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others M: 2020-04-16 00:02:23.560 MMDVM_Bridge-20191105_V1.4.1 is starting M: 2020-04-16 00:02:23.560 Built 19:10:05 Nov 11 2019 (GitID #9dae1ac) I: 2020-04-16 00:02:23.560 General Parameters I: 2020-04-16 00:02:23.560 Callsign: NA9PL I: 2020-04-16 00:02:23.560 Id: 3163052 I: 2020-04-16 00:02:23.560 Duplex: no I: 2020-04-16 00:02:23.560 Timeout: 180s I: 2020-04-16 00:02:23.560 D-Star: disabled I: 2020-04-16 00:02:23.560 DMR: enabled I: 2020-04-16 00:02:23.560 YSF: enabled I: 2020-04-16 00:02:23.560 P25: disabled I: 2020-04-16 00:02:23.560 NXDN: disabled I: 2020-04-16 00:02:23.560 Modem Parameters I: 2020-04-16 00:02:23.560 Port: /dev/null I: 2020-04-16 00:02:23.560 RX Invert: no I: 2020-04-16 00:02:23.560 TX Invert: no I: 2020-04-16 00:02:23.560 PTT Invert: no I: 2020-04-16 00:02:23.560 TX Delay: 100ms I: 2020-04-16 00:02:23.560 RX Offset: 0Hz I: 2020-04-16 00:02:23.560 TX Offset: 0Hz I: 2020-04-16 00:02:23.560 RX DC Offset: 0 I: 2020-04-16 00:02:23.560 TX DC Offset: 0 I: 2020-04-16 00:02:23.560 RF Level: 100.0% I: 2020-04-16 00:02:23.560 DMR Delay: 0 (0.0ms) I: 2020-04-16 00:02:23.560 RX Level: 50.0% I: 2020-04-16 00:02:23.560 CW Id TX Level: 50.0% I: 2020-04-16 00:02:23.560 D-Star TX Level: 50.0% I: 2020-04-16 00:02:23.560 DMR TX Level: 50.0% I: 2020-04-16 00:02:23.560 YSF TX Level: 50.0% I: 2020-04-16 00:02:23.560 P25 TX Level: 50.0% I: 2020-04-16 00:02:23.560 NXDN TX Level: 50.0% I: 2020-04-16 00:02:23.560 RX Frequency: 222340000Hz (222340000Hz) I: 2020-04-16 00:02:23.560 TX Frequency: 224940000Hz (224940000Hz) M: 2020-04-16 00:02:23.560 Opening the MMDVM I: 2020-04-16 00:02:23.560 Display Parameters I: 2020-04-16 00:02:23.560 Type: I: 2020-04-16 00:02:23.579 DMR Network Parameters I: 2020-04-16 00:02:23.579 Address: bm2602.ham-dmr.pl I: 2020-04-16 00:02:23.579 Port: 62031 I: 2020-04-16 00:02:23.579 Local: random I: 2020-04-16 00:02:23.579 Jitter: 360ms I: 2020-04-16 00:02:23.579 Slot 1: disabled I: 2020-04-16 00:02:23.579 Slot 2: enabled I: 2020-04-16 00:02:23.579 Mode Hang: 3s I: 2020-04-16 00:02:23.787 Info Parameters I: 2020-04-16 00:02:23.787 Callsign: NA9PL I: 2020-04-16 00:02:23.787 RX Frequency: 222340000Hz I: 2020-04-16 00:02:23.787 TX Frequency: 224940000Hz I: 2020-04-16 00:02:23.787 Power: 1W I: 2020-04-16 00:02:23.787 Latitude: 42.094589deg N I: 2020-04-16 00:02:23.787 Longitude: -87.971237deg E I: 2020-04-16 00:02:23.787 Height: 700m I: 2020-04-16 00:02:23.787 Location: "Arlington Heights, IL, USA" I: 2020-04-16 00:02:23.787 Description: "NA9PL_PAAROS_MMDVM_Bridge" I: 2020-04-16 00:02:23.787 URL: "http://PAAROS.com" M: 2020-04-16 00:02:23.787 DMR, Opening DMR Network I: 2020-04-16 00:02:23.787 System Fusion Network Parameters I: 2020-04-16 00:02:23.787 Local Address: 0 I: 2020-04-16 00:02:23.787 Local Port: 3200 I: 2020-04-16 00:02:23.788 Gateway Address: 64.53.214.179 I: 2020-04-16 00:02:23.788 Gateway Port: 42005 I: 2020-04-16 00:02:23.788 Mode Hang: 3s M: 2020-04-16 00:02:23.788 Opening YSF network connection I: 2020-04-16 00:02:23.788 RSSI I: 2020-04-16 00:02:23.788 Mapping File: RSSI.dat W: 2020-04-16 00:02:23.788 Cannot open the RSSI data file - RSSI.dat I: 2020-04-16 00:02:23.788 DMR Id Lookups I: 2020-04-16 00:02:23.788 File: /var/lib/mmdvm/DMRIds.dat I: 2020-04-16 00:02:23.788 Reload: 24 hours I: 2020-04-16 00:02:23.789 DMR RF Parameters I: 2020-04-16 00:02:23.789 Started the DMR Id lookup reload thread I: 2020-04-16 00:02:23.789 Id: 3163052 I: 2020-04-16 00:02:23.789 Color Code: 1 I: 2020-04-16 00:02:23.789 Self Only: no I: 2020-04-16 00:02:23.789 Embedded LC Only: yes I: 2020-04-16 00:02:23.789 Dump Talker Alias Data: no I: 2020-04-16 00:02:23.789 Prefixes: 0 I: 2020-04-16 00:02:23.789 Call Hang: 3s I: 2020-04-16 00:02:23.789 TX Hang: 3s I: 2020-04-16 00:02:23.789 Mode Hang: 10s M: 2020-04-16 00:02:23.789 DMR, Opening INI file: DVSwitch.ini M: 2020-04-16 00:02:23.791 DMR, Setting [DMR] Address -> 127.0.0.1 M: 2020-04-16 00:02:23.791 DMR, Setting [DMR] TXPort -> 32001 M: 2020-04-16 00:02:23.791 DMR, Setting [DMR] RXPort -> 32005 M: 2020-04-16 00:02:23.792 DMR, Setting [DMR] Slot -> 2 M: 2020-04-16 00:02:23.792 DMR, Transmitting on 127.0.0.1:32001 and listening on port 32005. Result = 1 I: 2020-04-16 00:02:23.792 YSF RF Parameters I: 2020-04-16 00:02:23.792 Low Deviation: no I: 2020-04-16 00:02:23.792 Remote Gateway: no I: 2020-04-16 00:02:23.792 Self Only: no I: 2020-04-16 00:02:23.792 DSQ: no I: 2020-04-16 00:02:23.792 Mode Hang: 10s M: 2020-04-16 00:02:23.792 YSF, Opening INI file: DVSwitch.ini M: 2020-04-16 00:02:23.792 YSF, Setting [YSF] Address -> 127.0.0.1 M: 2020-04-16 00:02:23.792 YSF, Setting [YSF] TXPort -> 32005 M: 2020-04-16 00:02:23.792 YSF, Setting [YSF] RXPort -> 32001 M: 2020-04-16 00:02:23.792 YSF, Setting [YSF] FallbackID -> 1234567 M: 2020-04-16 00:02:23.792 YSF, Setting [YSF] ExportTG -> 26018 M: 2020-04-16 00:02:23.792 YSF, Setting [YSF] Slot -> 2 M: 2020-04-16 00:02:23.793 YSF, Transmitting on 127.0.0.1:32005 and listening on port 32001. Result = 1 M: 2020-04-16 00:02:23.793 MMDVM_Bridge-20191105_V1.4.1 is running M: 2020-04-16 00:02:34.237 DMR, Logged into the master successfully
|
|
|
|
Can you have several instances of Dvswicth running in different folders with the dvswitch.sh?
EA5GVK Joaquin
I want to have several DVSwitch users running on the same raspberry pi.
I have different folders for the main user, with their mmdvm_bridge, analog_bridge and md380-emu. And in a different folder I have a secondary user, with the same folders mmdvm_bridge, analog_bridge and md380-emu. Of course I have changed ports in DVSwitch.ini from the MMDVM_Bridge folder. But do you have to change anything in the dvswitch.sh script of the second user? Many thx.
|
|
|
|
Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ?
#mmdvm_bridge
Alec Wasserman
Yes double check ysf gateway port. Everything has to match and it will work !
|
|
|
|
Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ?
#mmdvm_bridge
Uli,
toggle quoted messageShow quoted text
Do not worry about the Dashboard. You want to look at the MMDVM_Bridge log file. If you setup MMDVM_Bridge.ini and DVSwitch.ini as the wiki states, all you should have to do is point MMDVM_Bridge at the 2 systems you want to bridge see below: [DMR Network] Enable=1 Address=hblink.dvswitch.org <---------- Point this at the DMR network Port=62031 Jitter=360 Local=62032 Password=passw0rd Slot1=0 Slot2=1 Debug=0 [System Fusion Network] Enable=1 LocalAddress=0 LocalPort=3200 GatewayAddress=ysfreflector.dvswitch.org <-------- point this at the YSF reflector GatewayPort=42166 <-------- Set this to the proper port for the reflector Debug=0 Steve, N4IRS
On 4/15/2020 4:17 AM, Uli wrote:
I simply want to link my YSF Reflector to a Talkgroup on Brandmeister.
|
|
|
|
Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ?
#mmdvm_bridge
Uli
I simply want to link my YSF Reflector to a Talkgroup on Brandmeister.
Meanwhile I have tried 4 full installation attempts to do a Bridge between YSF and DMR but no luck. I have 2 RPI 3B+, both running raspbian stretch lite. One has a YSF Reflector installed according to QSO365´s (very good and working ) explanation. This Reflector and its Dashboard installed on the first attempt and runs fine without problems The other RPI 3B+ also has raspbian stretch lite installed, PHP7.0 and on top of it DVSwitch-System-Builder. Both RPi´s are running in the same Network 192.168.10.xxx behind a firewall. I was able to get the MMDVM_Bridge Dashboard running but it does not show any links or connection attempts from HT´s and the status is always idle. How do I get the MMDVM Bridge to link my reflector to the Brandmeister TG i have entered in DVSwitch.ini? Is there a complete detailed description which values in MMDVM_Bridge.ini and DVSwitch.ini and possibly in any other hidden config files or somewhere else need to be changed/adapted and how? I have done the suggested changes of values in the config files like from this https://dvswitch.groups.io/g/main/wiki/Bridge-DMR-to-YSF-Narrow but there are a lot of unanswered questions e.g. what do I put in "DMR adress" (I assume its the Brandmeister Master??) or in YSF Gateway Address (is it the URL of the other Pi that runs the Reflector?) What other ports do I need to open up on the firewall ? How should the config files look like for my setup? I have tried everything I could think of but no luck, the Bridge does not work as it should Do I need anything else (Software or Hardware than the two Raspberrys to do this? Did I miss anything? I´m completely stuck at this point. any help would greatly be appreciated Uli DJ5UW
|
|
|
|
Re: Setting up DVSwitch Mobile with ASL
Sent by smoke signal (AT&T)
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of honda5603@... <honda5603@...>
Sent: Tuesday, April 14, 2020 11:07:03 AM To: main@DVSwitch.groups.io <main@DVSwitch.groups.io> Subject: [DVSwitch] Setting up DVSwitch Mobile with ASL Are there instructions available for setting up the iax.conf file and extensions.conf file for accepting connections from my Android phone?
|
|
|