Date   

Re: Hytera DMR Gateway

KK4ZMG Richard
 

That's what I kinda figured. Was hoping some one else ran into this. Ill try to do the sim link.  Thanks


Re: Hytera DMR Gateway

Steve N4IRS
 

Richard,
We have nothing to do with gw_hytera_mmdvm. I suggest you check with the author. You might be able to so a symlink to fool gw_hytera_mmdvm.

Steve N4IRS

On 5/5/20 5:07 PM, KK4ZMG Richard via groups.io wrote:
I am having some difficulties getting gw_hytera_mmdvm to work on a raspberry pi 3 running Rasbian buster. It appears to be looking for an old version of openssh-1.0.0 but buster only has openssl-1.1  so it cannot find a bunch of the library.  Is there a way to update the gw_hytera_mmdvm to change it to look for the newer version of openssl?

Thanks
Richard KK4zmg


Re: Hytera DMR Gateway

KK4ZMG Richard
 

I am having some difficulties getting gw_hytera_mmdvm to work on a raspberry pi 3 running Rasbian buster. It appears to be looking for an old version of openssh-1.0.0 but buster only has openssl-1.1  so it cannot find a bunch of the library.  Is there a way to update the gw_hytera_mmdvm to change it to look for the newer version of openssl?

Thanks
Richard KK4zmg


Re: ASL YSF DMR P25

Dexter Harroo
 

Can someone at least point me to the files I need or the subgroup where I will find the info I need?


Re: Possible Loop in QSO DMR and MMDVM_Bridge or Analog_Bridge malfunction.

EA5GVK Joaquin
 

Here I show you a fragment of the Brandmeister log of the loop verification, which coincides with the hours indicated by the Analog_Bridge and MMDVM_Bridge logs.

May  5 16:15:14 radio-dmr Master 2141[34719]: Duplicate session by ID 2145016 of MMDVM Host system 2141429 at slot 0


Possible Loop in QSO DMR and MMDVM_Bridge or Analog_Bridge malfunction.

EA5GVK Joaquin
 

Possible Loop in Qso TG 21461 in BrandMeister, we were three friends, EA7JCL Jose antonio, EA1HWR Rafa and me EA5GVK, and in a moment the Dvswitch of the friend EA1HWR has started to broadcast all the traffic of qso 21461, generating a loop, and happening to the friend EA1HWR, which did not hear any traffic on your DVSwitch, leaving no traffic passing from the MMDVM_Bridge to the Analog_Bridge, although if EA1HWR, transmitted if your audio was perfect. So after the loop your dvswtich, the Analog_Bridge, does not receive data from the MMDVM_Bridge, but if you speak through the dvswitch, the Analog_Bridge transmits the traffic to the MMDVM_Bridge.

This situation also happened several days ago, being banned in prevention by the BM Network.
Here I show you the LOGs of the Analog_Bridge and the MMDVM_Bridge, from my friend Rafa EA1HWR, who has this bug.

In the Analog_Bridge log file, on line 108, there is a suspicious situation
I: 2020-05-05 16:15:09.131 USRP packet type: USRP_TYPE_TEXT ({"call": "EA5GVK", "name":""}) -> 2145016

I hope I've given you enough details to be able to solve this problem.
Thank you.


Re: Is there a simple way for Bridging a YSF Reflector to an XLX Reflector (new 2020 Version)

Tito Lopez - YN1OB
 

My config is as follows. Hope it makes sense. Ihave an ASL with echolink node with DVSwtich running. I connected it to XLX711.
I can get on to echolink viam my cell phone. I have my hotspot connect to the XLX I can hear the echolink transmission from My phone  but I cannot hear any TX from my hotspot

 I am working on fixing it but that is where I stand.
All DMR no YSF yet



On Tue, May 5, 2020 at 10:03 AM Ethan - KE7DUX <Ke7dux@...> wrote:
Uli, 

I am doing that, however it is using an Openspot 1 as an RF bridge. Not really optimal. It works MOST of the time, but I do have issues with WiresX node radio disconnecting when someone connects to YSF Reflector using a hotspot while having their WiresX button pressed. 


Re: Is there a simple way for Bridging a YSF Reflector to an XLX Reflector (new 2020 Version)

Ethan - KE7DUX
 

Uli, 

I am doing that, however it is using an Openspot 1 as an RF bridge. Not really optimal. It works MOST of the time, but I do have issues with WiresX node radio disconnecting when someone connects to YSF Reflector using a hotspot while having their WiresX button pressed. 


Re: Is there a simple way for Bridging a YSF Reflector to an XLX Reflector (new 2020 Version)

Uli
 

No problem
if everything ran flawless out of the box, our hobby would be pretty boring...

Next project is bridging a genuine Wires-X Room to a YSF or XLX Reflector. Have you ever tried that ?

greetings to California
stay safe and healthy

Uli


ASL YSF DMR P25

Dexter Harroo
 
Edited

Hi guys I hope I"m in the right group, I am building a multimode system,  ASL <-----> DMR <-----> YSF <------> P25 <------> DStar, and i will like to use DVSwitch mobile to connect to it, can anyone point me to where i will find information  to achieve this?
I already have ASL linked to DMR and DMR linked YSF working. Do I use HBlink for the XLX connection, and How do I connect to these Using DVswitch Mobile on my phone?


Thanks and Regards
Dexter 9Y4C


Re: Is there a simple way for Bridging a YSF Reflector to an XLX Reflector (new 2020 Version)

Eric-K6KWB
 

Great Job! sorry I forgot to tell you that lol. DMR ID when connecting to XLX should only be your 7 digit DMR ID : )


Re: New Binary Analog Bridge and MMDVM Bridge with Ircddbgateway gives me problems.

Steve KC1AWV
 

DISREGARD

Bad metadata. My fault.


Re: New Binary Analog Bridge and MMDVM Bridge with Ircddbgateway gives me problems.

Steve KC1AWV
 

Apologies if I'm waking a solved thread, but I seem to be having the same issue. Inbound DStar works on Allstar, but transmitting from Allstar doesn't seem to work.

I: 2020-05-04 21:03:51.186 Analog_Bridge Version 1.4.2 Sun Apr 26 07:18:31 EDT 2020

M: 2020-05-04 20:27:41.246 MMDVM_Bridge-20200309_V1.5.1 is starting
M: 2020-05-04 20:27:41.246 Built 08:23:16 Apr 24 2020 (GitID #59ba047)


Re: Is there a simple way for Bridging a YSF Reflector to an XLX Reflector (new 2020 Version)

Uli
 

I found it.
The reason why it did not work was the DMR ID at the top of the MMDVM_Bridge.ini, It had the two digit Brandmeister addon and that didn´t like the XLX Reflector and refused the connection.
The XLX Reflector was throwing an " unrecognized DMR ID" in the livelog and that gave me the final hint...

Thanks Steve and Eric for helping me out

Uli


Re: Is there a simple way for Bridging a YSF Reflector to an XLX Reflector (new 2020 Version)

Steve N4IRS
 

Show the DMR Network stanza from MMDVM_Bridge.ini


On 5/4/2020 1:00 PM, Uli wrote:
Hi Eric,
no it does not work, I can see the YSF Reflector connecting to the Bridge but the Bridge does not connect to the XLX Reflector.
I have tried different ports, I can ping the XLX Reflector but MMDVM_Bridge does not connect to it
What I get is this:

E: 2020-05-04 16:56:08.936 DMR, Connection to the master has timed out, retrying connection
M: 2020-05-04 16:56:08.936 DMR, Closing DMR Network
M: 2020-05-04 16:56:08.936 DMR, Opening DMR Network
E: 2020-05-04 16:57:18.947 DMR, Connection to the master has timed out, retrying connection
M: 2020-05-04 16:57:18.947 DMR, Closing DMR Network
M: 2020-05-04 16:57:18.947 DMR, Opening DMR Network
E: 2020-05-04 16:58:28.961 DMR, Connection to the master has timed out, retrying connection
M: 2020-05-04 16:58:28.961 DMR, Closing DMR Network
M: 2020-05-04 16:58:28.962 DMR, Opening DMR Network

I can see traffic coming in to the XLXRef but the Bridge doesn´t see it

Uli


Re: Is there a simple way for Bridging a YSF Reflector to an XLX Reflector (new 2020 Version)

Uli
 

Hi Eric,
no it does not work, I can see the YSF Reflector connecting to the Bridge but the Bridge does not connect to the XLX Reflector.
I have tried different ports, I can ping the XLX Reflector but MMDVM_Bridge does not connect to it
What I get is this:

E: 2020-05-04 16:56:08.936 DMR, Connection to the master has timed out, retrying connection
M: 2020-05-04 16:56:08.936 DMR, Closing DMR Network
M: 2020-05-04 16:56:08.936 DMR, Opening DMR Network
E: 2020-05-04 16:57:18.947 DMR, Connection to the master has timed out, retrying connection
M: 2020-05-04 16:57:18.947 DMR, Closing DMR Network
M: 2020-05-04 16:57:18.947 DMR, Opening DMR Network
E: 2020-05-04 16:58:28.961 DMR, Connection to the master has timed out, retrying connection
M: 2020-05-04 16:58:28.961 DMR, Closing DMR Network
M: 2020-05-04 16:58:28.962 DMR, Opening DMR Network

I can see traffic coming in to the XLXRef but the Bridge doesn´t see it

Uli


Re: Is there a simple way for Bridging a YSF Reflector to an XLX Reflector (new 2020 Version)

Uli
 

Thanks Eric,
I´ll give it a try

Uli


Re: Is there a simple way for Bridging a YSF Reflector to an XLX Reflector (new 2020 Version)

Eric-K6KWB
 

Uli, 
Just to be clear, this is a YSF Ref <-> XLX Ref modul A

See sample below - this will connect to XLX??? module A

MB.ini

[DMR Network]
Enable=1
Address=ip or DNS of XLX reflector
Port=62030
Jitter=360
Local=62032  >>> pay attention to this port will interfere if duplicate somewhere in the same server.
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
Options=XLX:4001  >>>>module A
Slot1=0
Slot2=1
Debug=1

[System Fusion Network]
Enable=1
LocalAddress=127.0.0.0
LocalPort=0
GatewayAddress=ip address or DNS of Ref
GatewayPort=42000  >>> YSF port
Debug=1

DVSwitch.ini

[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 36100                ; Port to send AMBE TLV frames to (export)
RXPort = 36103                  ; Port to listen on (import)
Slot = 2                        ; Export slot

[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 36103                 ; Port to send AMBE TLV frames to (export)
RXPort = 36100                 ; Port to listen on (import)
FallbackID = your id            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = tg9                 ; Which TG to export 
Slot = 2                        ; Export slot

73, Eric


Re: Bluetooth PTT Button

David - W9DWH
 

Thanks.


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

EA5GVK Joaquin
 

The update for DVLink V9.2.0 has just been released. It can be updated via OTA or we have provided a link to download images directly from the current version 9.2.0.
Here is a link to download and information as well as CHANGELOG.

http://ea5gvk-dmr.zigor.es/dvlink-v9-change-log/

73 EA5GVK & EA7JCL.

3541 - 3560 of 9798