Date   

Re: DVSWITCH in Pi Zero

Mike Zingman - N4IRR
 

Run it with quem-arm

qemu-arm /opt/md380-emu -S 2470 &
 


Re: ircddbgateway install command line only

va3dxv
 

Hello I realize it may be off topic for this group but... How are you getting ircddbgateway to compile with no X/GUI environment?

I do have wxwidgets base installed. I've tried the latest source direct from g4klx and also the old dl5di/opendv fork. In both cases the compile gets about half done then fails and complains as soon as it gets to compiling stuff in GUICommon.

The configure script for the dl4di fork completes without error using --without-gui, but when I compile it, I get the same errors that I get with the g4klx code. I don't understand why it would even try to build the GUICommon stuff

Am I missing something? Thank You


make[1]: Leaving directory '/home/repeater/ircDDBGateway/ircDDBGateway'
make -C GUICommon
make[1]: Entering directory '/home/repeater/ircDDBGateway/GUICommon'
g++ -O2 -Wall -I/usr/lib/arm-linux-gnueabihf/wx/include/base-unicode-3.0 -I/usr/include/wx-3.0 -D_FILE_OFFSET_BITS=64 -DWXUSINGDLL -pthread -DLOG_DIR='"/var/log"' -DCONF_DIR='"/etc"' -DDATA_DIR='"/usr/share/ircddbgateway"' -g -D_DEBUG -I../Common -c -o AddressTextCtrl.o AddressTextCtrl.cpp
In file included from AddressTextCtrl.h:24:0,
                 from AddressTextCtrl.cpp:19:
RestrictedTextCtrl.h:24:47: error: expected class-name before ‘{’ token
 class CRestrictedTextCtrl : public wxTextCtrl {
                                               ^
Makefile:13: recipe for target 'AddressTextCtrl.o' failed


Re: Analog Bridge Binds to the same port

Matthew 2E0SIP
 

Awesome, thanks all!


Re: Analog Bridge Binds to the same port

Mike Zingman - N4IRR
 

I have addressed the issue.  We will need to test in-house for a while to make sure it is solid (more changes than a simple listener).  Steve will release when it is solid


Re: Where is the DVSM_Update.sh scripts?

Steve N4IRS
 

I have not decided it I'm going to use that systemd unit file or not.
<https://github.com/DVSwitch/DVSwitch-System-Builder/blob/master/Directories/usr/local/sbin/DVSM_Update.sh>

On 6/1/2020 2:13 PM, EA5GVK Joaquin wrote:
Steve please, where is the DVSM_Update.sh script, in the new service update_data_files.system
Thank you.


Where is the DVSM_Update.sh scripts?

EA5GVK Joaquin
 

Steve please, where is the DVSM_Update.sh script, in the new service update_data_files.system
Thank you.


DVSWITCH in Pi Zero

ea7jcl@...
 

If I try to run dvswitch on a pi zero, mmdvm_bridge and analog_bridge, they work apparently fine, but the md380-emu boots, but upon starting the conversion it returns an error.
 
root@raspberrypi:/opt/md380-emu# ./md380-emu -v -S 2470
Listening on port 2470, entering while loop
data ready
got 7 bytes
Illegal instruction
 
Could it be because of the pi zero processor? any ideas?
 
Thanks 


Re: Analog Bridge Binds to the same port

 

If you are running the ambeserver on the same device.

address = 127.0.0.1                   ; IP address of AMBEServer
rxPort = 2460                         ; Port of AMBEServer
address = /dev/ttyUSB0              ; Device of DV3000U on this machine
baud = 460800                       ; Baud rate of the dongle (230400 or 460800)
serial = false                       ; Use serial=true for direct connect or serial=false for AMBEServer
I found that I needed the bottom three lines as well.


Re: Analog Bridge Binds to the same port

Matthew 2E0SIP
 

Cheers Steve. In the short term I've shifted AMBEServer to another Pi. In the medium term I might experiment with running it in Docker, but I'm not an expert on that front. 


Re: Analog Bridge Binds to the same port

Steve N4IRS
 

You are correct. The change that was made recently had to do with the emulator. Mike is looking at making the same type of change for AMBE_Server. I'll keep you informed.

Steve

On 6/1/2020 9:23 AM, Matthew 2E0SIP wrote:

Hi Steve,

I pulled the latest and had the same issue. If I start AMBEServer and it binds to 2460, then start Analog_Bridge, AB tries to bind to the same port and can't.

Thanks



Re: Analog Bridge Binds to the same port

Matthew 2E0SIP
 

Hi Steve,

I pulled the latest and had the same issue. If I start AMBEServer and it binds to 2460, then start Analog_Bridge, AB tries to bind to the same port and can't.

Thanks


Re: Analog Bridge Binds to the same port

Steve N4IRS
 

Yes, grab the latest from github and re-test

On 6/1/2020 8:35 AM, Matthew 2E0SIP wrote:
Architecture is armhf

I'm using the latest version from the repo. Should I be pulling from Github? 

Thanks


Re: Analog Bridge Binds to the same port

Matthew 2E0SIP
 

Architecture is armhf

I'm using the latest version from the repo. Should I be pulling from Github? 

Thanks


Re: Analog Bridge Binds to the same port

Steve N4IRS
 

Matt,
Are you running the most current version from github? What architecture are you running on?

73, Steve N4IRS

On 6/1/20 5:22 AM, Matthew 2E0SIP wrote:

Hi All, 

I am attempting to use a modified version of AMBESever in order to use a DVMega AMBE 3000 board that's not supported by Analog_Bridge (Github Issue).

However, Analog_Bridge binds to the rxPort itself, so it won't start if AMBEServer is running on the same host. 

[DV3000]
address = 127.0.0.1                ; IP address of AMBEServer
rxPort = 2461                      ; Port of AMBEServer

In a future version of Analog Bridge would it be possible to define a local port, or bind to a random port? I appreciate this is an unusual use case.

Thanks!


Analog Bridge Binds to the same port

Matthew 2E0SIP
 

Hi All, 

I am attempting to use a modified version of AMBESever in order to use a DVMega AMBE 3000 board that's not supported by Analog_Bridge (Github Issue).

However, Analog_Bridge binds to the rxPort itself, so it won't start if AMBEServer is running on the same host. 

[DV3000]
address = 127.0.0.1                ; IP address of AMBEServer
rxPort = 2461                      ; Port of AMBEServer

In a future version of Analog Bridge would it be possible to define a local port, or bind to a random port? I appreciate this is an unusual use case.

Thanks!


Re: ASL_node_list.txt

Tom Corcoran
 

Followed your directions and the nodes_list.txt file uploads to the android device. However, when I initiate the IAX2 ASL profile, select Macro on the Dialer page, select Nodes, select an Allstar node, the command that is issued is a *2 command (i.e. monitor only). How do I change this so it is a *3 command initiating connection?

--
Tom VE3NY


Re: Will Nextion Screen work with dvswitch?

Steve N4IRS
 

On 5/31/20 4:34 PM, Andre VE3SP 🇨🇦 wrote:

thanks for the very useful information within.


--

73s,   Warmest wishes to you and blessings to your family.
Andre 
Toronto, CANADA 🇨🇦 
🌐 website VE3SP.com

VE3SP.com 


Re: Will Nextion Screen work with dvswitch?

 

thanks for the very useful information within.


--

73s,   Warmest wishes to you and blessings to your family.
Andre 
Toronto, CANADA 🇨🇦 
🌐 website VE3SP.com

VE3SP.com 


Re: MMDVM_Bridge doesn't appear to be connecting to ircddbgateway

Matthew 2E0SIP
 

Ah, that solved it. I think at some point subscriber_ids.csv was in the wrong format. I've updated it, restarted everything, and now its working, hopefully.


Re: MMDVM_Bridge doesn't appear to be connecting to ircddbgateway

Matthew 2E0SIP
 

Hi Steve,

I'll see if I can schedule something with another Amateur on a DCS reflector.

I noticed in a packet capture I'm sending a DMR ID in place of a Call Sign in the packet to XLX:


This is what it looks like from a D-Star user:


On the DMR side of Analog_Bridge I see this:

I: 2020-05-31 19:43:37.056 Begin TX: src=2343265 rpt=0 dst=2348479 slot=2 cc=0 call=2343265

I wonder if this is causing the issue. Do you know why this would happen? subscriber_ids.csv is up to date and includes my DMR ID, so I'd expect to see my callsign

Thanks

 

 

4061 - 4080 of 10560