Date   

Re: DVSwitch-Mobile with ASL - control codes ignored and macros lost.

Steve N4IRS
 

While at the CLI:
rpt debug level 7
send *70 from DVSM

On 6/19/20 6:37 AM, Barry G4MKT via groups.io wrote:
On 19/06/2020 10:50, Steve N4IRS wrote:
Barry,
As far as saving, the free version will not save changes.
Ah OK

Can you post a
section of your messages.log when you send a command?

Steve N4IRS
Hi Steve, Thanks for your speedy reply.
There is no such file as messages.log, however there is /var/log/asterisk/messages which I looked at while trying to send commands from DVSwitch but nothing was reported.
Likewise nothing in /var/log/messages.

Running asterisk the output is as follows when connecting from DVSwitch
-----------------------------------
repeater@allstar:~ $ sudo asterisk -rvvvvvvvvvv

AllStarLink Asterisk Version 1.01 2/13/2018 GIT Version adaec47
Copyright (C) 1999 - 2018 Digium, Inc. Jim Dixon, AllStarLink Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
  == Parsing '/etc/asterisk/asterisk.conf': Found
Connected to Asterisk GIT Version adaec47 currently running on allstar (pid = 429)
Verbosity was 8 and is now 10
    -- Accepting AUTHENTICATED call from 86.191.77.185:
       > requested format = unknown,
       > requested prefs = (slin|ulaw|adpcm),
       > actual format = ulaw,
       > host prefs = (ulaw|adpcm|gsm),
       > priority = caller
    -- Executing [41006@iax-client:1] Ringing("IAX2/G4MKT-1211", "") in new stack
    -- Executing [41006@iax-client:2] Wait("IAX2/G4MKT-1211", "3") in new stack
    -- Executing [41006@iax-client:3] Answer("IAX2/G4MKT-1211", "") in new stack
    -- Executing [41006@iax-client:4] Set("IAX2/G4MKT-1211", "NODENUM=41006") in new stack
    -- Executing [41006@iax-client:5] Playback("IAX2/G4MKT-1211", "rpt/node|noanswer") in new stack
    -- <IAX2/G4MKT-1211> Playing 'rpt/node' (language 'en')
    -- Executing [41006@iax-client:6] SayDigits("IAX2/G4MKT-1211", "41006") in new stack
    -- <IAX2/G4MKT-1211> Playing 'digits/4' (language 'en')
    -- <IAX2/G4MKT-1211> Playing 'digits/1' (language 'en')
    -- <IAX2/G4MKT-1211> Playing 'digits/0' (language 'en')
    -- <IAX2/G4MKT-1211> Playing 'digits/0' (language 'en')
    -- <IAX2/G4MKT-1211> Playing 'digits/6' (language 'en')
    -- Executing [41006@iax-client:7] Set("IAX2/G4MKT-1211", "CALLERID(num)=0") in new stack
    -- Executing [41006@iax-client:8] Rpt("IAX2/G4MKT-1211", "41006|P|G4MKT") in new stack
Node Variable dump for node 41006:
   XX_RPT_RXKEYED=0
   XX_RPT_TXKEYED=0
   RPT_NUMLINKS=1
   RPT_LINKS=1,TG4MKT
   RPT_NUMALINKS=1
   RPT_ALINKS=1,G4MKTTU
   RPT_TXKEYED=0
   RPT_RXKEYED=0
   RPT_ETXKEYED=0
   RPT_AUTOPATCHUP=0
    -- 10 variables
  == Spawn extension (iax-client, 41006, 8) exited KEEPALIVE on 'IAX2/G4MKT-1211'
[Jun 19 11:24:52] WARNING[506]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '41006'
[Jun 19 11:24:52] WARNING[500]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest
    -- ast_get_srv: SRV lookup for '_sip._udp.sipgate.co.uk' mapped to host sipgate.co.uk, port 5060
allstar*CLI>
repeater@allstar:~ $

After the initial DVSwitch connect I then sent a *3xxxx connect request to another node number using the DVSwitch keypad and the send button. There was no response in the asterisk output. The background to the command in the DVSwitch UI turned pink on hitting 'Send' - I don't know what that signifies.

Thanks


Re: DVSwitch-Mobile with ASL - control codes ignored and macros lost.

Steve N4IRS
 

Sorry, a little early and I support a number of programs. I added .log.
Same result with *70 ?

On 6/19/20 6:37 AM, Barry G4MKT via groups.io wrote:
On 19/06/2020 10:50, Steve N4IRS wrote:
Barry,
As far as saving, the free version will not save changes.
Ah OK

Can you post a
section of your messages.log when you send a command?

Steve N4IRS
Hi Steve, Thanks for your speedy reply.
There is no such file as messages.log, however there is /var/log/asterisk/messages which I looked at while trying to send commands from DVSwitch but nothing was reported.
Likewise nothing in /var/log/messages.

Running asterisk the output is as follows when connecting from DVSwitch
-----------------------------------
repeater@allstar:~ $ sudo asterisk -rvvvvvvvvvv

AllStarLink Asterisk Version 1.01 2/13/2018 GIT Version adaec47
Copyright (C) 1999 - 2018 Digium, Inc. Jim Dixon, AllStarLink Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
  == Parsing '/etc/asterisk/asterisk.conf': Found
Connected to Asterisk GIT Version adaec47 currently running on allstar (pid = 429)
Verbosity was 8 and is now 10
    -- Accepting AUTHENTICATED call from 86.191.77.185:
       > requested format = unknown,
       > requested prefs = (slin|ulaw|adpcm),
       > actual format = ulaw,
       > host prefs = (ulaw|adpcm|gsm),
       > priority = caller
    -- Executing [41006@iax-client:1] Ringing("IAX2/G4MKT-1211", "") in new stack
    -- Executing [41006@iax-client:2] Wait("IAX2/G4MKT-1211", "3") in new stack
    -- Executing [41006@iax-client:3] Answer("IAX2/G4MKT-1211", "") in new stack
    -- Executing [41006@iax-client:4] Set("IAX2/G4MKT-1211", "NODENUM=41006") in new stack
    -- Executing [41006@iax-client:5] Playback("IAX2/G4MKT-1211", "rpt/node|noanswer") in new stack
    -- <IAX2/G4MKT-1211> Playing 'rpt/node' (language 'en')
    -- Executing [41006@iax-client:6] SayDigits("IAX2/G4MKT-1211", "41006") in new stack
    -- <IAX2/G4MKT-1211> Playing 'digits/4' (language 'en')
    -- <IAX2/G4MKT-1211> Playing 'digits/1' (language 'en')
    -- <IAX2/G4MKT-1211> Playing 'digits/0' (language 'en')
    -- <IAX2/G4MKT-1211> Playing 'digits/0' (language 'en')
    -- <IAX2/G4MKT-1211> Playing 'digits/6' (language 'en')
    -- Executing [41006@iax-client:7] Set("IAX2/G4MKT-1211", "CALLERID(num)=0") in new stack
    -- Executing [41006@iax-client:8] Rpt("IAX2/G4MKT-1211", "41006|P|G4MKT") in new stack
Node Variable dump for node 41006:
   XX_RPT_RXKEYED=0
   XX_RPT_TXKEYED=0
   RPT_NUMLINKS=1
   RPT_LINKS=1,TG4MKT
   RPT_NUMALINKS=1
   RPT_ALINKS=1,G4MKTTU
   RPT_TXKEYED=0
   RPT_RXKEYED=0
   RPT_ETXKEYED=0
   RPT_AUTOPATCHUP=0
    -- 10 variables
  == Spawn extension (iax-client, 41006, 8) exited KEEPALIVE on 'IAX2/G4MKT-1211'
[Jun 19 11:24:52] WARNING[506]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '41006'
[Jun 19 11:24:52] WARNING[500]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest
    -- ast_get_srv: SRV lookup for '_sip._udp.sipgate.co.uk' mapped to host sipgate.co.uk, port 5060
allstar*CLI>
repeater@allstar:~ $

After the initial DVSwitch connect I then sent a *3xxxx connect request to another node number using the DVSwitch keypad and the send button. There was no response in the asterisk output. The background to the command in the DVSwitch UI turned pink on hitting 'Send' - I don't know what that signifies.

Thanks


Re: DVSwitch-Mobile with ASL - control codes ignored and macros lost.

Barry G4MKT
 

On 19/06/2020 10:50, Steve N4IRS wrote:
Barry,
As far as saving, the free version will not save changes.
Ah OK

Can you post a
section of your messages.log when you send a command?
Steve N4IRS
Hi Steve, Thanks for your speedy reply.
There is no such file as messages.log, however there is /var/log/asterisk/messages which I looked at while trying to send commands from DVSwitch but nothing was reported.
Likewise nothing in /var/log/messages.

Running asterisk the output is as follows when connecting from DVSwitch
-----------------------------------
repeater@allstar:~ $ sudo asterisk -rvvvvvvvvvv

AllStarLink Asterisk Version 1.01 2/13/2018 GIT Version adaec47
Copyright (C) 1999 - 2018 Digium, Inc. Jim Dixon, AllStarLink Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
== Parsing '/etc/asterisk/asterisk.conf': Found
Connected to Asterisk GIT Version adaec47 currently running on allstar (pid = 429)
Verbosity was 8 and is now 10
-- Accepting AUTHENTICATED call from 86.191.77.185:
> requested format = unknown,
> requested prefs = (slin|ulaw|adpcm),
> actual format = ulaw,
> host prefs = (ulaw|adpcm|gsm),
> priority = caller
-- Executing [41006@iax-client:1] Ringing("IAX2/G4MKT-1211", "") in new stack
-- Executing [41006@iax-client:2] Wait("IAX2/G4MKT-1211", "3") in new stack
-- Executing [41006@iax-client:3] Answer("IAX2/G4MKT-1211", "") in new stack
-- Executing [41006@iax-client:4] Set("IAX2/G4MKT-1211", "NODENUM=41006") in new stack
-- Executing [41006@iax-client:5] Playback("IAX2/G4MKT-1211", "rpt/node|noanswer") in new stack
-- <IAX2/G4MKT-1211> Playing 'rpt/node' (language 'en')
-- Executing [41006@iax-client:6] SayDigits("IAX2/G4MKT-1211", "41006") in new stack
-- <IAX2/G4MKT-1211> Playing 'digits/4' (language 'en')
-- <IAX2/G4MKT-1211> Playing 'digits/1' (language 'en')
-- <IAX2/G4MKT-1211> Playing 'digits/0' (language 'en')
-- <IAX2/G4MKT-1211> Playing 'digits/0' (language 'en')
-- <IAX2/G4MKT-1211> Playing 'digits/6' (language 'en')
-- Executing [41006@iax-client:7] Set("IAX2/G4MKT-1211", "CALLERID(num)=0") in new stack
-- Executing [41006@iax-client:8] Rpt("IAX2/G4MKT-1211", "41006|P|G4MKT") in new stack
Node Variable dump for node 41006:
XX_RPT_RXKEYED=0
XX_RPT_TXKEYED=0
RPT_NUMLINKS=1
RPT_LINKS=1,TG4MKT
RPT_NUMALINKS=1
RPT_ALINKS=1,G4MKTTU
RPT_TXKEYED=0
RPT_RXKEYED=0
RPT_ETXKEYED=0
RPT_AUTOPATCHUP=0
-- 10 variables
== Spawn extension (iax-client, 41006, 8) exited KEEPALIVE on 'IAX2/G4MKT-1211'
[Jun 19 11:24:52] WARNING[506]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '41006'
[Jun 19 11:24:52] WARNING[500]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest
-- ast_get_srv: SRV lookup for '_sip._udp.sipgate.co.uk' mapped to host sipgate.co.uk, port 5060
allstar*CLI>
repeater@allstar:~ $

After the initial DVSwitch connect I then sent a *3xxxx connect request to another node number using the DVSwitch keypad and the send button. There was no response in the asterisk output. The background to the command in the DVSwitch UI turned pink on hitting 'Send' - I don't know what that signifies.

Thanks


--
Barry
G4MKT


Re: Connection problem on Brandmeister PH5151 #brandmeister

Steve N4IRS
 

I just tested bm5151.hamradio.com.ph It works here.
What is the result of:
ping bm5151.hamradio.com.ph

Steve

On 6/19/20 6:11 AM, ramon paulino wrote:
Hi steve,
 [DMR Network]
Enable=1
Address=bm5151.hamradio.com.ph
Port=62031
Jitter=360
Local=62032
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0
Logs using BM5151 Philippines : 2020-06-19 06:19:22.465 DMR, Connection to the master has timed out, retrying connection M: 2020-06-19 06:19:22.465 DMR, Closing DMR Network M: 2020-06-19 06:19:22.465 DMR, Opening DMR Network Logs when they are using BM USA 3101 2020-06-19 06:21:16.614 MMDVM_Bridge-20200309_V1.5.1 is running M: 2020-06-19 06:21:27.826 DMR, Logged into the master successfully
Ramon
Thank you for your fast reply,
DU1ZC
 


Re: Connection problem on Brandmeister PH5151 #brandmeister

ramon paulino
 

Hi steve,
 [DMR Network]
Enable=1
Address=bm5151.hamradio.com.ph
Port=62031
Jitter=360
Local=62032
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0
Logs using BM5151 Philippines : 2020-06-19 06:19:22.465 DMR, Connection to the master has timed out, retrying connection M: 2020-06-19 06:19:22.465 DMR, Closing DMR Network M: 2020-06-19 06:19:22.465 DMR, Opening DMR Network Logs when they are using BM USA 3101 2020-06-19 06:21:16.614 MMDVM_Bridge-20200309_V1.5.1 is running M: 2020-06-19 06:21:27.826 DMR, Logged into the master successfully
Ramon
Thank you for your fast reply,
DU1ZC
 


Re: DVSwitch-Mobile with ASL - control codes ignored and macros lost.

Steve N4IRS
 

Barry,
As far as saving, the free version will not save changes. Can you post a section of your messages.log when you send a command?

Steve N4IRS

On 6/18/20 5:22 PM, Barry G4MKT via groups.io wrote:
I installed DVSwich-Mobile from the Play Store on my Android phone to control and connect to my AllStar-Link node.
I can connect to the node and have PTT, audio TX and RX but cannot see anything received by asterisk at the node when I try to send it control codes like *73 or a *3<nodenumber>.

Another issue is that when I configure macros, they don't survive a re-start of the application.
What am I doing wrong?

Version is 1.56 (128)
Android-8.1.0


DVSwitch-Mobile with ASL - control codes ignored and macros lost.

Barry G4MKT
 

I installed DVSwich-Mobile from the Play Store on my Android phone to control and connect to my AllStar-Link node.
I can connect to the node and have PTT, audio TX and RX but cannot see anything received by asterisk at the node when I try to send it control codes like *73 or a *3<nodenumber>.

Another issue is that when I configure macros, they don't survive a re-start of the application.
What am I doing wrong?

Version is 1.56 (128)
Android-8.1.0


Re: Connection problem on Brandmeister PH5151 #brandmeister

Steve N4IRS
 

What IP address are you connecting to? Please post your [DMR Network] stanza from MMDVM_Bridge.ini

Steve N4IRS

On 6/19/20 4:14 AM, ramon paulino wrote:
Hi,
This is DU1ZC and newbie here,
I would like to ask any idea why I cannot connect to BM PH5151 but can connect to BM USA 3103?
However, my MMDVm hotspot can connect to BM PH 5151 server.
Thank You


Connection problem on Brandmeister PH5151 #brandmeister

ramon paulino
 

Hi,
This is DU1ZC and newbie here,
I would like to ask any idea why I cannot connect to BM PH5151 but can connect to BM USA 3103?
However, my MMDVm hotspot can connect to BM PH 5151 server.
Thank You


Re: Multiple instances of Bridge

W8DSB
 

All, i was able to install HBlink and use that to route the audio between repeaters,  BrandMeister  and the XLX modules. Thanks for all replies and help.


Re: YSF <--> DMR Bridge BM blocked

Bj DV8AWC
 
Edited

As referred by Geoffrey VE6GCD this solves the "user blocked". Learning new things from his information. 73


Thanks
BJ DV8AWC


Re: YSF <--> DMR Bridge BM blocked

Alec-N1AJW
 

i am getting the same thing occasionally on my setup using on DVSwitch on VM.  I will also try to connect MMDVM_Bridge as a repeater (duplex) rather then hotspot (simplex) and see if it works.  thanks for that information.  


Alec
N1AJW


Re: YSF <--> DMR Bridge BM blocked

ve6gcd@...
 

I have tried all sorts of methods in the past, the first effective workaround was to use Analog Bridge between DMR and YSF where the DMR side has 2000ms hang time from Analog Bridge. The drawback is that the callsign info is not passed to YSF/DMR in this process.

Eventually, I figured that the best approach to solve this is for you to connect to Brandmeister not as a hotspot, but as a repeater network. By doing this, you will avoid encountering the "user blocked" message completely and without the need for hang time settings.

Option 1: Request a bridge to Brandmeister

https://wiki.brandmeister.network/index.php/Open_Bridge
https://wiki.brandmeister.network/index.php/XLX
https://wiki.brandmeister.network/index.php/WIRES-X
https://wiki.brandmeister.network/index.php/IMRS

Option 2: DIY
https://wiki.brandmeister.network/index.php/Homebrew_repeater_protocol
https://brandmeister.network/?page=repeaters then try to learn the software they used to connect to Brandmeister. 

73,
Geoffrey VE6GCD


Re: YSF <--> DMR Bridge BM blocked

Bj DV8AWC
 
Edited

found a temporary workaround for this using two nodes of usrp with primary node as YSF and second node as DMR with added minTxTimeMS to prevent blocked message from BM (bridge removed). Audio quality is OK going from digital -> analog, gonna test the reverse if it still good.

UPDATE:
Not recommended, degraded audio quality and wont pass the ID's. It's better to use the bridge.

Thanks
BJ DV8AWC


YSF <--> DMR Bridge BM blocked

Bj DV8AWC
 

I have a working YSF <--> DMR Bridge but sometimes it gets blocked from BM due to short rapid ptt press on the analog side of the DR-2X which is also connected to the YSF side of the bridge. Is there a workaround for this or adding some minTxTimeMS like on the analog bridge ini to the mmdvm bridge ini for the YSF section?

Thanks
BJ DV8AWC


Re: Setting up a YSF Reflector <---> XLX (DMR) Reflector

Steve N4IRS
 

On 6/13/20 8:34 AM, Adrianm0glj@... wrote:
On Sat, Jun 13, 2020 at 01:58 AM, Steve N4IRS wrote:
MMDVM_Bridge
Thanks Steve.

Where would I find this package?

Adrian M0GLJ


Re: Setting up a YSF Reflector <---> XLX (DMR) Reflector

Adrianm0glj@...
 

On Sat, Jun 13, 2020 at 01:58 AM, Steve N4IRS wrote:
MMDVM_Bridge
Thanks Steve.

Where would I find this package?

Adrian M0GLJ


Re: Setting up a YSF Reflector <---> XLX (DMR) Reflector

Steve N4IRS
 

We don't use YSF2DMR. If you want to bridge the 2 networks use MMDVM_Bridge.

Steve N4IRS

On 6/12/20 8:50 PM, Adrianm0glj@... wrote:
Hi All

I'm trying to setup a YSF Reflecter to XLX(DMR) reflector. The YSFReflector is working. From what I have read I should be able to use YSF2DMR to bridge the 2 networks.
I have followed the instructions on https://github.com/juribeparada/MMDVM_CM/blob/master/YSF2DMR/service/README.md to setup the unit file and I have the XLXHosts.txt file downloaded from http://xlxapi.rlx.lu/api.php?do=GetXLXDMRMaster

However, I am getting and error when I start the unit file.

--->snip<---
root@vps-4a62c445:/usr/local/bin# sudo systemctl status ysf2dmr
● ysf2dmr.service - YSF2DMR Service
   Loaded: loaded (/lib/systemd/system/ysf2dmr.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Sat 2020-06-13 01:49:01 BST; 5s ago
  Process: 2374 ExecStop=/usr/local/sbin/ysf2dmr.service stop (code=exited, status=1/FAILURE)
  Process: 2362 ExecStart=/usr/local/sbin/ysf2dmr.service start (code=exited, status=0/SUCCESS)
 Main PID: 2362 (code=exited, status=0/SUCCESS)

Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354 General Parameters
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354     Remote Gateway: no
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354     Hang Time: 1000 ms
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: M: 2020-06-13 00:49:01.354 Opening YSF network connection
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: M: 2020-06-13 00:49:01.355 Trying to find non existent XLX reflector with an id of 5
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: E: 2020-06-13 00:49:01.355 Cannot open DMR Network
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: YSF2DMR started as PID
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2374]: YSF2DMR is not running
Jun 13 01:49:01 vps-4a62c445 systemd[1]: ysf2dmr.service: Control process exited, code=exited status=1
Jun 13 01:49:01 vps-4a62c445 systemd[1]: ysf2dmr.service: Failed with result 'exit-code'.
root@vps-4a62c445:/usr/local/bin#

 
--->snip<---

Could someone give me some tips on where to look for the obvious mistake that I have made the is not hitting me on the head please?

Thanks in Advance
Adrian M0GLJ


Setting up a YSF Reflector <---> XLX (DMR) Reflector

Adrianm0glj@...
 

Hi All

I'm trying to setup a YSF Reflecter to XLX(DMR) reflector. The YSFReflector is working. From what I have read I should be able to use YSF2DMR to bridge the 2 networks.
I have followed the instructions on https://github.com/juribeparada/MMDVM_CM/blob/master/YSF2DMR/service/README.md to setup the unit file and I have the XLXHosts.txt file downloaded from http://xlxapi.rlx.lu/api.php?do=GetXLXDMRMaster

However, I am getting and error when I start the unit file.

--->snip<---
root@vps-4a62c445:/usr/local/bin# sudo systemctl status ysf2dmr
● ysf2dmr.service - YSF2DMR Service
   Loaded: loaded (/lib/systemd/system/ysf2dmr.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Sat 2020-06-13 01:49:01 BST; 5s ago
  Process: 2374 ExecStop=/usr/local/sbin/ysf2dmr.service stop (code=exited, status=1/FAILURE)
  Process: 2362 ExecStart=/usr/local/sbin/ysf2dmr.service start (code=exited, status=0/SUCCESS)
 Main PID: 2362 (code=exited, status=0/SUCCESS)

Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354 General Parameters
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354     Remote Gateway: no
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354     Hang Time: 1000 ms
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: M: 2020-06-13 00:49:01.354 Opening YSF network connection
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: M: 2020-06-13 00:49:01.355 Trying to find non existent XLX reflector with an id of 5
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: E: 2020-06-13 00:49:01.355 Cannot open DMR Network
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: YSF2DMR started as PID
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2374]: YSF2DMR is not running
Jun 13 01:49:01 vps-4a62c445 systemd[1]: ysf2dmr.service: Control process exited, code=exited status=1
Jun 13 01:49:01 vps-4a62c445 systemd[1]: ysf2dmr.service: Failed with result 'exit-code'.
root@vps-4a62c445:/usr/local/bin#

 
--->snip<---

Could someone give me some tips on where to look for the obvious mistake that I have made the is not hitting me on the head please?

Thanks in Advance
Adrian M0GLJ


Re: YSF <> BM DMR Bridging - Best Way?

J M
 

After doing even more reading and experimenting, I got this all worked out. I ended up switching XLX back to serving D-STAR + DMR, C4FM using YSFReflector, and tying those two together with MMDVM_Bridge. Everything seems to be working.

3001 - 3020 of 9595