Date   

Re: Merry Christmas and a happy new year!

Nicola IT9FXF <onetechct@...>
 

Buon Natale a tutti !


Re: HBLink: Adhoc clients with routing rules, conferences etc

Nicola IT9FXF <onetechct@...>
 

Hello Steve, thanks!
Must I put same name on hblink.cfg for the hblink side?
I used this cfg :

PARROT
[MASTER-1] 
MODE: MASTER ENABLED: True 
REPEAT: True EXPORT_AMBE: False 
IP: 127.0.0.1 PORT: 54001 P
ASSPHRASE: passw0rd 
GROUP_HANGTIME: 5
 
hblink receive from repeaters
 
[MASTER-1]
MODE: MASTER
ENABLED: True
REPEAT: True
EXPORT_AMBE: False
IP:
PORT: 62031
PASSPHRASE: passw0rd
GROUP_HANGTIME: 5
 
hb_confbridge
 
[PARROT]
MODE: CLIENT
ENABLED: True
EXPORT_AMBE: False
IP: 127.0.0.1
PORT: 54011
MASTER_IP: 127.0.0.1
MASTER_PORT: 54001
PASSPHRASE: passw0rd
CALLSIGN: XXXXX
RADIO_ID: 312001
RX_FREQ: 449000000
TX_FREQ: 444000000
TX_POWER: 25
COLORCODE: 8
SLOTS: 2
LATITUDE: 38.0000
LONGITUDE: -095.0000
HEIGHT: 75
LOCATION: Anywhere, USA
DESCRIPTION: This is a cool repeater
URL: www.w1abc.org
SOFTWARE_ID: HBlink
PACKAGE_ID: v0.1
GROUP_HANGTIME: 5
OPTIONS:
 
[MASTER]
MODE: CLIENT
ENABLED: True
EXPORT_AMBE: False
IP: 127.0.0.1
PORT: 54010
MASTER_IP: 127.0.0.1
MASTER_PORT: 54000
PASSPHRASE: passw0rd
CALLSIGN: XXXXX
RADIO_ID: 312002
RX_FREQ: 449000000
TX_FREQ: 444000000
TX_POWER: 25
COLORCODE: 1
SLOTS: 2
LATITUDE: 38.0000
LONGITUDE: -095.0000
HEIGHT: 75
LOCATION: Anywhere, USA
DESCRIPTION: This is a cool repeater
URL: www.w1abc.org
SOFTWARE_ID: HBlink
PACKAGE_ID: v0.1
GROUP_HANGTIME: 5
OPTIONS:
 


Re: HBLink: Adhoc clients with routing rules, conferences etc

Steve N4IRS
 

I have posted a example from my running ConfBridge https://groups.io/g/DVSwitch/files/N4IRS_confbridge_rules.py


Merry Christmas and a happy new year!

Peter M0NWI
 

To All, and more specifically Cort, Steve and Mike,

Thanks for all you've done for the hobby this year, and wishing you lovely festive break.

73,
Peter, M0NWI


Re: HBLink: Adhoc clients with routing rules, conferences etc

Nicola IT9FXF <onetechct@...>
 

Can explain more examples of confbridge rules ?
Thanks !


Re: Where To Start

stevecast2024@...
 

All good. HB_Bridge and IPSC_Bridge seem to be communicating with each other. My last item now is to figure out why I have such a high packet loss. Not sure what would be causing that. I appreciate you help in getting this up and running.


Re: Where To Start

Steve N4IRS
 

You are right about the loose rate. See if this helps you configure it.
<https://groups.io/g/DVSwitch/files/HB_Bridge_to_IPSC_Bridge_Diagram.pdf>

On 12/23/2017 07:59 PM, stevecast2024@... wrote:
Okay. So I should be pointing the config file for hb_bridge to the 8300 as the master as well then?

I am seeing data flowing although it seems like extremely high loss rate:
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 16448250
INFO Voice Transmission End 5.58 seconds loss rate: 96.77% (3/93)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 54205
INFO Voice Transmission End 9.90 seconds loss rate: 98.18% (3/165)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 16448250
INFO Voice Transmission End 5.58 seconds loss rate: 96.77% (3/93)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 54205
INFO Voice Transmission End 17.10 seconds loss rate: 98.95% (3/285)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 16448250
INFO Voice Transmission End 9.90 seconds loss rate: 98.18% (3/165)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 54205
INFO Voice Transmission End 25.74 seconds loss rate: 99.30% (3/429)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 16448250
INFO Voice Transmission End 7.02 seconds loss rate: 97.44% (3/117)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 54205
INFO Voice Transmission End 5.22 seconds loss rate: 96.55% (3/87)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 54205
INFO Voice Transmission End 16.02 seconds loss rate: 98.88% (3/267)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 16448250


Re: Where To Start

stevecast2024@...
 

Okay. So I should be pointing the config file for hb_bridge to the 8300 as the master as well then?

I am seeing data flowing although it seems like extremely high loss rate:
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 16448250
INFO Voice Transmission End 5.58 seconds loss rate: 96.77% (3/93)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 54205
INFO Voice Transmission End 9.90 seconds loss rate: 98.18% (3/165)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 16448250
INFO Voice Transmission End 5.58 seconds loss rate: 96.77% (3/93)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 54205
INFO Voice Transmission End 17.10 seconds loss rate: 98.95% (3/285)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 16448250
INFO Voice Transmission End 9.90 seconds loss rate: 98.18% (3/165)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 54205
INFO Voice Transmission End 25.74 seconds loss rate: 99.30% (3/429)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 16448250
INFO Voice Transmission End 7.02 seconds loss rate: 97.44% (3/117)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 54205
INFO Voice Transmission End 5.22 seconds loss rate: 96.55% (3/87)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 54205
INFO Voice Transmission End 16.02 seconds loss rate: 98.88% (3/267)
INFO Voice Transmission Start on TS 2 and TG 9642 (9642) from 16448250


Re: Where To Start

Steve N4IRS
 

A MMDVM repeater is a client (peer) can not be a server (master)

On 12/23/2017 07:24 PM, stevecast2024@... wrote:
Sounds good. Things are looking good right now. One additional question. I am configuring hb_bridge now. In the overall picture I have my 8300 configured as master. In the settings for hb_bridge where should I point the master? Is that supposed to point to the MMDVM repeater? Or is the MMDVM repeater considered a peer in this case?


Re: Where To Start

stevecast2024@...
 

Sounds good. Things are looking good right now. One additional question. I am configuring hb_bridge now. In the overall picture I have my 8300 configured as master. In the settings for hb_bridge where should I point the master? Is that supposed to point to the MMDVM repeater? Or is the MMDVM repeater considered a peer in this case?


Re: HBLink: Adhoc clients with routing rules, conferences etc

Nicola IT9FXF <onetechct@...>
 

I give up! Parrot work  when I use my talker group) it work at reverse, in the 9990 parrot is off and can talk ))
I need just a simple rule, open all tg and just 9990 por the parrot.
Can help me ?


Re: Where To Start

Steve N4IRS
 

Once I have it running properly I run it in the background and tail the log when I need to look. For output from the programs, look at the LOGGER stanza. I do not use screen.

Steve

On 12/23/2017 06:15 PM, stevecast2024@... wrote:
So far IPSC_Bridge and dmrlink seem to be running without issue. What is the best way to run the programs in the foreground? I currently see no output from the programs. The log does seem okay though. Do you use tmux or screen?


Re: Where To Start

stevecast2024@...
 

So far IPSC_Bridge and dmrlink seem to be running without issue. What is the best way to run the programs in the foreground? I currently see no output from the programs. The log does seem okay though. Do you use tmux or screen?


Re: HBLink: Adhoc clients with routing rules, conferences etc

Steve N4IRS
 

Copy hb_routing_rules-SAMPLE.py to hb_routing_rules.py and then edit hb_routing_rules.py

On 12/23/2017 03:56 PM, Nicola IT9FXF via Groups.Io wrote:
Must edit rules inside hb_routing_rules-SAMPLE.py ? Or inside hblink.cfg with SYSTEM  ?
 


Re: HBLink: Adhoc clients with routing rules, conferences etc

Nicola IT9FXF <onetechct@...>
 

Must edit rules inside hb_routing_rules-SAMPLE.py ? Or inside hblink.cfg with SYSTEM  ?
 


Re: HBlink and DMRlink in "production"

Cort N0MJS <n0mjs@...>
 

There’s almost no reason to ever run hblink.py by itself.

The other programs, like hb_bridge_all.py all call and run hblink.py in the background.

On Dec 23, 2017, at 12:20 PM, Nicola IT9FXF via Groups.Io <onetechct@...> wrote:

Now working..
was a problem with the aliases, must start only hb_bridge_all.py ? If I start hblink.py and hb_bridge_all.py  show an error, it is normal it ?
Can I add a local parrot ?
 

--
Cort Buffington
H: +1-785-813-1501
M: +1-785-865-7206






Re: HBlink and DMRlink in "production"

Nicola IT9FXF <onetechct@...>
 

Now working..
was a problem with the aliases, must start only hb_bridge_all.py ? If I start hblink.py and hb_bridge_all.py  show an error, it is normal it ?
Can I add a local parrot ?
 


Re: HBlink and DMRlink in "production"

Corey Dean N3FE <n3fe@...>
 

Looks like port 62031 was in use.

Corey. N3FE

Sent from my iPhone

On Dec 23, 2017, at 5:31 AM, Steve N4IRS <szingman@...> wrote:

post your hblink.cfg

On 12/23/2017 01:22 AM, Nicola IT9FXF via Groups.Io wrote:

[Edited Message Follows]

Hello, HBLink work perfect but can't start hb_bridge_all.py, any suggest ?
If start togheter with HBLink I receive this message :
pi@Master:/opt/HBLink $ sudo python hb_bridge_all.py
Traceback (most recent call last):
  File "hb_bridge_all.py", line 228, in <module>
    reactor.listenUDP(CONFIG['SYSTEMS'][system]['PORT'], systems[system], interface=CONFIG['SYSTEMS'][system]['IP'])
  File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP
    p.startListening()
  File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening
    self._bindSocket()
  File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket
    raise error.CannotListenError(self.interface, self.port, le)
twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:62031: [Errno 98] Address already in use.


Re: HBlink and DMRlink in "production"

Steve N4IRS
 

post your hblink.cfg

On 12/23/2017 01:22 AM, Nicola IT9FXF via Groups.Io wrote:

[Edited Message Follows]

Hello, HBLink work perfect but can't start hb_bridge_all.py, any suggest ?
If start togheter with HBLink I receive this message :
pi@Master:/opt/HBLink $ sudo python hb_bridge_all.py
Traceback (most recent call last):
  File "hb_bridge_all.py", line 228, in <module>
    reactor.listenUDP(CONFIG['SYSTEMS'][system]['PORT'], systems[system], interface=CONFIG['SYSTEMS'][system]['IP'])
  File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP
    p.startListening()
  File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening
    self._bindSocket()
  File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket
    raise error.CannotListenError(self.interface, self.port, le)
twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:62031: [Errno 98] Address already in use.


Re: Where To Start

stevecast2024@...
 

Sounds good. Thank you Steve. I will give it a shot.

9121 - 9140 of 9775