Welcome to DVSwitch

I'm not sure I understand your answer....maybe if I rephrase--

How do I get my P25 reflector/TG to show up in the pulldown in the P25 section of the configuration screen of every Pi-Star hotspot in existence?

-Bob

KK6RQ

On Tue, Jul 28, 2020 at 4:42 PM Steve N4IRS <szingman@...> wrote:

That file starts with <https://github.com/g4klx/P25Clients/tree/master/P25Gateway> Where people get their host file depends on where they get their software.

Steve

On 7/28/20 4:41 PM, Bob KK6RQ wrote:

Thanks, that clears that up.

Another question is, what determines whether the TG shows up automatically in everyone's P25Hosts.txt (ie. "published"?)

-Bob

KK6RQ

On Tue, Jul 28, 2020 at 4:39 AM Steve N4IRS <szingman@...> wrote:

Bob,
The P25Reflector software does not actually care what TG it reflects. When the reflector sees UDP traffic on the proper port, it reflects it to all connected users.
The program that determines what TG, is actually P25Gateway in it's host file:

# 10200 North America
10200    dvswitch.org        41000

This tells P25Gateway, when you see traffic on TG 10200 send the traffic to dvswitch.org (44.103.34.4) on UDP port 41000.
As to the name, again it's in the P25Gateway host file.

73, Steve N4IRS

On 7/27/20 11:05 PM, nuhtrue@... wrote:

Hi,

I'm having some difficulty while installing the whole package (G4-somebody/dvswitch) using the 927.org instructions (which is riddled with typos);
I've read everything I've been able to google, both here and elsewhere, but I'm stuck on a concept or two:

What (and WHERE or WHO) determines what your newly installed P25 reflector's TG ID is?

I probably will choose not to publish the TG (at first, at least) but where do I give it its name? I saw a thread where Steve says some ppl are using the same #
as their chosen DMR TG (which already exists; I'm trying to link them)?

Thanks,

Bob
KK6RQ

Thanks, that clears that up.

Another question is, what determines whether the TG shows up automatically in everyone's P25Hosts.txt (ie. "published"?)

-Bob

KK6RQ

On Tue, Jul 28, 2020 at 4:39 AM Steve N4IRS <szingman@...> wrote:

Bob,
The P25Reflector software does not actually care what TG it reflects. When the reflector sees UDP traffic on the proper port, it reflects it to all connected users.
The program that determines what TG, is actually P25Gateway in it's host file:

# 10200 North America
10200    dvswitch.org        41000

This tells P25Gateway, when you see traffic on TG 10200 send the traffic to dvswitch.org (44.103.34.4) on UDP port 41000.
As to the name, again it's in the P25Gateway host file.

73, Steve N4IRS

On 7/27/20 11:05 PM, nuhtrue@... wrote:

Hi,

I'm having some difficulty while installing the whole package (G4-somebody/dvswitch) using the 927.org instructions (which is riddled with typos);
I've read everything I've been able to google, both here and elsewhere, but I'm stuck on a concept or two:

What (and WHERE or WHO) determines what your newly installed P25 reflector's TG ID is?

I probably will choose not to publish the TG (at first, at least) but where do I give it its name? I saw a thread where Steve says some ppl are using the same #
as their chosen DMR TG (which already exists; I'm trying to link them)?

Thanks,

Bob
KK6RQ

Hello,
We have DVSwitch running with a connection to BrandMeister to our AllStar server. I think this is MMDVM_Host <-> analog_bridge. The AllStar server is the hub of our analog repeater network.

We are having a problem that sprouts up after about four hours of operation. We start getting key-up on our analog repeaters with the word "muted", it is muffled and hard to understand, but we think this is what it's saying. The logs show network traffic coming from the DMR side, but we don't hear it if we monitor the talkgroup.

Is there something in the DVSwitch stack of software, or maybe in AllStar that would broadcast the word "muted? I'm hoping this will help us determine the issue.

Any help you can provide would be helpful.

Michael AF6FB

Hi,

I'm having some difficulty while installing the whole package (G4-somebody/dvswitch) using the 927.org instructions (which is riddled with typos);
I've read everything I've been able to google, both here and elsewhere, but I'm stuck on a concept or two:

What (and WHERE or WHO) determines what your newly installed P25 reflector's TG ID is?

I probably will choose not to publish the TG (at first, at least) but where do I give it its name? I saw a thread where Steve says some ppl are using the same #
as their chosen DMR TG (which already exists; I'm trying to link them)?

Thanks,

Bob
KK6RQ

cd /opt/Analog_Bridge
rm dvswitch.sh
wget https://raw.githubusercontent.com/DVSwitch/MMDVM_Bridge/master/dvswitch.sh
./dvswitch.sh update

works.

So, the debian installer just needs an update.
Mike, AA9VI

root@allstar:/opt/Analog_Bridge# ./dvswitch.sh update

./dvswitch.sh: line 701: jq: command not found

./dvswitch.sh: line 702: jq: command not found

Error, DMR ID file does not seem to be valid

Ideas?

I just found this and I need an ID update.  How do I manually update the  subscriber_ids.csv ID list?  Where is dvswitch.sh?  I tried to invoke the command but it does not know where it is.  Can someone send the full path?

Also, if you go into MMDVM_Bridge.ini it looks for 
/var/log/mmdvm/DMRIds.dat

So, that's different than this .csv file mentioned above.  All I want is an updated Id lookup file.  What is the proper procedure for updating that, and where does it ultimately reside?

Thanks,
Mike, AA9VI