Date   

Re: Problem after Power Blip

Brad N8PC
 

I think I solved it. I reset my router with no go on it. then i just did a Full factory reset of my router and that cured the problem. In case anyone else has that same problem do a factory reset (Full) or put it on a UPS to so it don't get trashed.


Re: Problem after Power Blip

Steve N4IRS
 

I don't see anything wrong.
Restart MMDVM_Bridge
Check selfcare and make sure it's showing the bridge logged in.

Steve

On 8/2/20 4:13 PM, Brad N8PC wrote:
Steve,
  I had a power Blip and reset everything. The problem is I can hear my DMR audio from Brandmeister thru the Bridge over my repeater.
I see on brandmeister that my repeater is sending data to brandmeister but nothing is heard over my DMR from them. example:

DMR to Hotspot to BM to TG 314651 to AB over repeater works fine
Analog to AB to MB to Brandmeister tg 314651 sees packets but
Brandmeister to tg 314651 to my hotspot nothing heard and no data.

Please help me understand that. it also doesn't matter what server or talk group I use same results.
attaching logs for your viewing


Problem after Power Blip

Brad N8PC
 

Steve,
  I had a power Blip and reset everything. The problem is I can hear my DMR audio from Brandmeister thru the Bridge over my repeater.
I see on brandmeister that my repeater is sending data to brandmeister but nothing is heard over my DMR from them. example:

DMR to Hotspot to BM to TG 314651 to AB over repeater works fine
Analog to AB to MB to Brandmeister tg 314651 sees packets but
Brandmeister to tg 314651 to my hotspot nothing heard and no data.

Please help me understand that. it also doesn't matter what server or talk group I use same results.
attaching logs for your viewing


Re: mmdvm_bridge won’t start on boot after update #mmdvm_bridge

Chris Whitam
 

That did it!  Awesome, thank you!


AllStar and DummyRepeater

 

I'm looking to build a a gateway between AllStar and D-STAR, and I've
seen references to using DummyRepeater and IRCDDBGateway, instead of
Analog_Bridge.  This has the advantage for me of being able to repurpose
a blue DV Dongle to do the DSAMBE conversion, saving a bit of money and
postage time (postage is quite slow these days)

I am aware there is a modification for DummyRepeater that allows it to
use the USRP interface, making it a perfect fit for AllStar, and I have
the AllStar side configured.  However, from there, documentation seems
to be lacking, and I couldn't find the patch (found a dead Guthub link).


Anyone have any more info?

--
73 de Tony VK3JED/VK3IRL
http://vkradio.com


Re: mmdvm_bridge won’t start on boot after update #mmdvm_bridge

Steve N4IRS
 

Chris,
It sounds like netcheck does not think your internet connection is coming up fast enough.
Make a backup of mmdvm_bridge.system and edit the file:
 
[Unit]

Description=MMDVM_Bridge Service
# Description=Place this file in /lib/systemd/system
# Description=N4IRS 04/20/2018

# The device name should point to the
# port the mmdvm is plugged into.
# For USB ports (Arduino Due)
# BindTo=dev-ttyACM0.device
#
# To make the network-online.target available
# systemctl enable systemd-networkd-wait-online.service

After=network-online.target syslog.target # netcheck.service
# Requires=netcheck.service
Wants=network-online.target

[Service]
Type=simple
Restart=always
RestartSec=3
Restart=on-abort
StandardOutput=null
WorkingDirectory=/opt/MMDVM_Bridge
ExecStartPre = /bin/sh -c 'echo "Starting MMDVM_Bridge: [`date +%%T.%%3N`]" >> $
ExecStart=/opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini
ExecReload=/bin/kill -HUP $MAINPID
KillMode=process

[Install]
WantedBy=multi-user.target

I bolded the 2 places to comment out netcheck.
reboot and verify mmdvm_bridge is starting.

Steve N4IRS


On 8/1/20 10:53 PM, Chris Whitam wrote:
On Sat, Aug 1, 2020 at 10:11 PM, Steve N4IRS wrote:
mmdvm_bridge.system
Here is what it looks like

[Unit]

Description=MMDVM_Bridge Service

# Description=Place this file in /lib/systemd/system

# Description=N4IRS 04/20/2018

 

# The device name should point to the

# port the mmdvm is plugged into.

# For USB ports (Arduino Due)

# BindTo=dev-ttyACM0.device

#

# To make the network-online.target available

# systemctl enable systemd-networkd-wait-online.service

 

After=network-online.target syslog.target netcheck.service

Requires=netcheck.service

Wants=network-online.target

 

[Service]

Type=simple

Restart=always

RestartSec=3

Restart=on-abort

StandardOutput=null

WorkingDirectory=/opt/MMDVM_Bridge

ExecStartPre = /bin/sh -c 'echo "Starting MMDVM_Bridge: [`date +%%T.%%3N`]" >> $

ExecStart=/opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini

ExecReload=/bin/kill -HUP $MAINPID

 

KillMode=process

[Install]

WantedBy=multi-user.target

 

 

 

 



Re: mmdvm_bridge won’t start on boot after update #mmdvm_bridge

Chris Whitam
 

On Sat, Aug 1, 2020 at 10:11 PM, Steve N4IRS wrote:
mmdvm_bridge.system
Here is what it looks like

[Unit]

Description=MMDVM_Bridge Service

# Description=Place this file in /lib/systemd/system

# Description=N4IRS 04/20/2018

 

# The device name should point to the

# port the mmdvm is plugged into.

# For USB ports (Arduino Due)

# BindTo=dev-ttyACM0.device

#

# To make the network-online.target available

# systemctl enable systemd-networkd-wait-online.service

 

After=network-online.target syslog.target netcheck.service

Requires=netcheck.service

Wants=network-online.target

 

[Service]

Type=simple

Restart=always

RestartSec=3

Restart=on-abort

StandardOutput=null

WorkingDirectory=/opt/MMDVM_Bridge

ExecStartPre = /bin/sh -c 'echo "Starting MMDVM_Bridge: [`date +%%T.%%3N`]" >> $

ExecStart=/opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini

ExecReload=/bin/kill -HUP $MAINPID

 

KillMode=process

[Install]

WantedBy=multi-user.target

 

 

 

 


Re: mmdvm_bridge won’t start on boot after update #mmdvm_bridge

Steve N4IRS
 

Show me your /lib/systemd/system/mmdvm_bridge.system

On 8/1/20 9:59 PM, Chris Whitam wrote:

So it appears I have an issue when I do the status.

mmdvm_bridge.service - MMDVM_Bridge Service

   Loaded: loaded (/lib/systemd/system/mmdvm_bridge.service; enabled; vendor preset: enabled)

   Active: inactive (dead)

 

Jul 31 22:49:49 DVSWITCH systemd[1]: Dependency failed for MMDVM_Bridge Service.

Jul 31 22:49:49 DVSWITCH systemd[1]: mmdvm_bridge.service: Job mmdvm_bridge.servic





Re: mmdvm_bridge won’t start on boot after update #mmdvm_bridge

Chris Whitam
 

So it appears I have an issue when I do the status.

mmdvm_bridge.service - MMDVM_Bridge Service

   Loaded: loaded (/lib/systemd/system/mmdvm_bridge.service; enabled; vendor preset: enabled)

   Active: inactive (dead)

 

Jul 31 22:49:49 DVSWITCH systemd[1]: Dependency failed for MMDVM_Bridge Service.

Jul 31 22:49:49 DVSWITCH systemd[1]: mmdvm_bridge.service: Job mmdvm_bridge.servic




Re: #brandmeister How can I link YSFReflector to BM talkgroup? #brandmeister

@BH4ERY
 

Thank you very much!


Re: mmdvm_bridge won’t start on boot after update #mmdvm_bridge

Steve N4IRS
 

Chris,
Here is the output of enable disable and status:

root@dvswitch-server:/home/dvswitch# systemctl disable mmdvm_bridge
Removed /etc/systemd/system/multi-user.target.wants/mmdvm_bridge.service.

root@dvswitch-server:/home/dvswitch# systemctl enable mmdvm_bridge
Created symlink /etc/systemd/system/multi-user.target.wants/mmdvm_bridge.service → /lib/systemd/system/mmdvm_bridge.service.

root@dvswitch-server:/home/dvswitch# systemctl status mmdvm_bridge
● mmdvm_bridge.service - MMDVM_Bridge Service
   Loaded: loaded (/lib/systemd/system/mmdvm_bridge.service; enabled; vendor preset: enabled)
   Active: active (running) since Fri 2020-07-31 06:42:48 EDT; 24h ago
 Main PID: 3091 (MMDVM_Bridge)
    Tasks: 3 (limit: 2068)
   CGroup: /system.slice/mmdvm_bridge.service
           └─3091 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini

Jul 31 06:42:48 dvswitch-server systemd[1]: Starting MMDVM_Bridge Service...
Jul 31 06:42:48 dvswitch-server systemd[1]: Started MMDVM_Bridge Service.

I bolded the important info for troubleshooting

73, Steve N4IRS


On 7/31/20 11:12 PM, Chris Whitam wrote:
Good Evening, I have a pi setup with The Quantar bridge suite of software which has been running with no problem for a year or two now. (When I turn it on). As there
had been no updates to the os or dvswitch since then, I went ahead and did a apt-get update and apt-get upgrade.  Now the mmdvm_bridge will no longer automatically start on boot up, however quantar_bridge, p25gateway, etc all still work fine.  If I do systemctl mmdvm_bridge the mmdvm bridge starts running right away and then everything works like normal, it just will not automatically start.  I tried a systemctl disable mmdvm_bridge, then reboot, then systemctl enable mmdvm_bridge and that had no effect.  Anyone have any other ideas so that I do not have to manually start mmdvm_bridge every time the pi powers up. Thanks!  


mmdvm_bridge won’t start on boot after update #mmdvm_bridge

Chris Whitam
 

Good Evening, I have a pi setup with The Quantar bridge suite of software which has been running with no problem for a year or two now. (When I turn it on). As there
had been no updates to the os or dvswitch since then, I went ahead and did a apt-get update and apt-get upgrade.  Now the mmdvm_bridge will no longer automatically start on boot up, however quantar_bridge, p25gateway, etc all still work fine.  If I do systemctl mmdvm_bridge the mmdvm bridge starts running right away and then everything works like normal, it just will not automatically start.  I tried a systemctl disable mmdvm_bridge, then reboot, then systemctl enable mmdvm_bridge and that had no effect.  Anyone have any other ideas so that I do not have to manually start mmdvm_bridge every time the pi powers up. Thanks!  


Re: "Muted" prompt #analog_bridge

Corey Dean N3FE
 

Yes user blocked comes from bm, but not “muted”

Corey n3fe


On Jul 30, 2020, at 11:06 PM, Brad N8PC <bradn8pc@...> wrote:

 if it says user blocked it is brandmeister. you have to wait 1 hr for it to unlock or switch servers

On 7/30/2020 10:10 AM, Steve N4IRS wrote:
Well,
Neither AB or MB generate a voice message so...

On 7/30/2020 10:08 AM, Michael Rickey (AF6FB) wrote:
Thanks for getting back to me. The BrandMeister team assured me this message was not coming from them...

Michael AF6FB

_.


Re: "Muted" prompt #analog_bridge

Brad N8PC
 

if it says user blocked it is brandmeister. you have to wait 1 hr for it to unlock or switch servers

On 7/30/2020 10:10 AM, Steve N4IRS wrote:
Well,
Neither AB or MB generate a voice message so...

On 7/30/2020 10:08 AM, Michael Rickey (AF6FB) wrote:
Thanks for getting back to me. The BrandMeister team assured me this message was not coming from them...

Michael AF6FB

_.


Re: "Muted" prompt #analog_bridge

Steve N4IRS
 

Well,
Neither AB or MB generate a voice message so...

On 7/30/2020 10:08 AM, Michael Rickey (AF6FB) wrote:
Thanks for getting back to me. The BrandMeister team assured me this message was not coming from them...

Michael AF6FB


Re: "Muted" prompt #analog_bridge

Michael Rickey (AF6FB)
 

Thanks for getting back to me. The BrandMeister team assured me this message was not coming from them...

Michael AF6FB


Re: P25Reflector install help...

Bob KK6RQ
 

Got it, thanks. I'm using the instructions from 927.org. I'm surprised I've gotten as far as I have, given all the typos (periods instead of forward slashes, mixing cases, etc.) that slowed me down by a couple of hours...

-Bob
KK6RQ


On Tue, Jul 28, 2020 at 7:04 PM Steve N4IRS <szingman@...> wrote:
No,
It's just knowing who wrote the software and who created Pi-Star. (Google MMDVM and Pi-Star would have turned that up) I believe Pi-Star has a forum and the MMDVM was discussed on Yahoo before they shut down their mail lists. The P25Reflector is somewhat outside of the areas we support.

On 7/28/20 7:55 PM, Bob KK6RQ wrote:
OK, thanks. I didn't see any reference to that in any of the docs or forum discussion. Did I miss it somewhere?

-Bob
KK6RQ

On Tue, Jul 28, 2020 at 6:15 PM Steve N4IRS <szingman@...> wrote:
Yes

On 7/28/20 7:13 PM, Bob KK6RQ wrote:
So....I need to 'submit' my reflector info to one of them to get included on that version of the file, then?

-Bob
KK6RQ

On Tue, Jul 28, 2020 at 6:01 PM Steve N4IRS <szingman@...> wrote:
Bob,
So, that's the issue. If you use Pi-Star, the host file comes from Andy Taylor MW0MWZ (The author of Pi-Star) Andy starts with the the host file from Jonathan G4KLX which is here <https://github.com/g4klx/P25Clients/blob/master/P25Gateway/P25Hosts.txt> There is nothing sacred about the file. Pi-Star give the user the ability to add custom entries. If I dont use Pi-Star I can edit the host file to my liking.

Pi-Star is a "repackaging" of the software from G4LKX. That is not to say Andy does not add value. He certainly does and I would venture to say that without Pi-Star (or something like it) DV hotspots would not have taken off like it did.

Steve N4IRS 

On 7/28/20 6:51 PM, Bob KK6RQ wrote:
I'm not sure I understand your answer....maybe if I rephrase--

How do I get my P25 reflector/TG to show up in the pulldown in the P25 section of the configuration screen of every Pi-Star hotspot in existence?

-Bob
KK6RQ

On Tue, Jul 28, 2020 at 4:42 PM Steve N4IRS <szingman@...> wrote:
That file starts with <https://github.com/g4klx/P25Clients/tree/master/P25Gateway> Where people get their host file depends on where they get their software.

Steve

On 7/28/20 4:41 PM, Bob KK6RQ wrote:
Thanks, that clears that up.

Another question is, what determines whether the TG shows up automatically in everyone's P25Hosts.txt (ie. "published"?)

-Bob
KK6RQ

On Tue, Jul 28, 2020 at 4:39 AM Steve N4IRS <szingman@...> wrote:
Bob,
The P25Reflector software does not actually care what TG it reflects. When the reflector sees UDP traffic on the proper port, it reflects it to all connected users.
The program that determines what TG, is actually P25Gateway in it's host file:

# 10200 North America
10200    dvswitch.org        41000

This tells P25Gateway, when you see traffic on TG 10200 send the traffic to dvswitch.org (44.103.34.4) on UDP port 41000.
As to the name, again it's in the P25Gateway host file.

73, Steve N4IRS

On 7/27/20 11:05 PM, nuhtrue@... wrote:
Hi,

I'm having some difficulty while installing the whole package (G4-somebody/dvswitch) using the 927.org instructions (which is riddled with typos);
I've read everything I've been able to google, both here and elsewhere, but I'm stuck on a concept or two:

What (and WHERE or WHO) determines what your newly installed P25 reflector's TG ID is?

I probably will choose not to publish the TG (at first, at least) but where do I give it its name? I saw a thread where Steve says some ppl are using the same #
as their chosen DMR TG (which already exists; I'm trying to link them)?

Thanks,

Bob
KK6RQ






Re: P25Reflector install help...

Steve N4IRS
 

On 7/28/20 7:55 PM, Bob KK6RQ wrote:
OK, thanks. I didn't see any reference to that in any of the docs or forum discussion. Did I miss it somewhere?

-Bob
KK6RQ

On Tue, Jul 28, 2020 at 6:15 PM Steve N4IRS <szingman@...> wrote:
Yes

On 7/28/20 7:13 PM, Bob KK6RQ wrote:
So....I need to 'submit' my reflector info to one of them to get included on that version of the file, then?

-Bob
KK6RQ

On Tue, Jul 28, 2020 at 6:01 PM Steve N4IRS <szingman@...> wrote:
Bob,
So, that's the issue. If you use Pi-Star, the host file comes from Andy Taylor MW0MWZ (The author of Pi-Star) Andy starts with the the host file from Jonathan G4KLX which is here <https://github.com/g4klx/P25Clients/blob/master/P25Gateway/P25Hosts.txt> There is nothing sacred about the file. Pi-Star give the user the ability to add custom entries. If I dont use Pi-Star I can edit the host file to my liking.

Pi-Star is a "repackaging" of the software from G4LKX. That is not to say Andy does not add value. He certainly does and I would venture to say that without Pi-Star (or something like it) DV hotspots would not have taken off like it did.

Steve N4IRS 

On 7/28/20 6:51 PM, Bob KK6RQ wrote:
I'm not sure I understand your answer....maybe if I rephrase--

How do I get my P25 reflector/TG to show up in the pulldown in the P25 section of the configuration screen of every Pi-Star hotspot in existence?

-Bob
KK6RQ

On Tue, Jul 28, 2020 at 4:42 PM Steve N4IRS <szingman@...> wrote:
That file starts with <https://github.com/g4klx/P25Clients/tree/master/P25Gateway> Where people get their host file depends on where they get their software.

Steve

On 7/28/20 4:41 PM, Bob KK6RQ wrote:
Thanks, that clears that up.

Another question is, what determines whether the TG shows up automatically in everyone's P25Hosts.txt (ie. "published"?)

-Bob
KK6RQ

On Tue, Jul 28, 2020 at 4:39 AM Steve N4IRS <szingman@...> wrote:
Bob,
The P25Reflector software does not actually care what TG it reflects. When the reflector sees UDP traffic on the proper port, it reflects it to all connected users.
The program that determines what TG, is actually P25Gateway in it's host file:

# 10200 North America
10200    dvswitch.org        41000

This tells P25Gateway, when you see traffic on TG 10200 send the traffic to dvswitch.org (44.103.34.4) on UDP port 41000.
As to the name, again it's in the P25Gateway host file.

73, Steve N4IRS

On 7/27/20 11:05 PM, nuhtrue@... wrote:
Hi,

I'm having some difficulty while installing the whole package (G4-somebody/dvswitch) using the 927.org instructions (which is riddled with typos);
I've read everything I've been able to google, both here and elsewhere, but I'm stuck on a concept or two:

What (and WHERE or WHO) determines what your newly installed P25 reflector's TG ID is?

I probably will choose not to publish the TG (at first, at least) but where do I give it its name? I saw a thread where Steve says some ppl are using the same #
as their chosen DMR TG (which already exists; I'm trying to link them)?

Thanks,

Bob
KK6RQ






Re: P25Reflector install help...

Steve N4IRS
 

No,
It's just knowing who wrote the software and who created Pi-Star. (Google MMDVM and Pi-Star would have turned that up) I believe Pi-Star has a forum and the MMDVM was discussed on Yahoo before they shut down their mail lists. The P25Reflector is somewhat outside of the areas we support.

On 7/28/20 7:55 PM, Bob KK6RQ wrote:
OK, thanks. I didn't see any reference to that in any of the docs or forum discussion. Did I miss it somewhere?

-Bob
KK6RQ

On Tue, Jul 28, 2020 at 6:15 PM Steve N4IRS <szingman@...> wrote:
Yes

On 7/28/20 7:13 PM, Bob KK6RQ wrote:
So....I need to 'submit' my reflector info to one of them to get included on that version of the file, then?

-Bob
KK6RQ

On Tue, Jul 28, 2020 at 6:01 PM Steve N4IRS <szingman@...> wrote:
Bob,
So, that's the issue. If you use Pi-Star, the host file comes from Andy Taylor MW0MWZ (The author of Pi-Star) Andy starts with the the host file from Jonathan G4KLX which is here <https://github.com/g4klx/P25Clients/blob/master/P25Gateway/P25Hosts.txt> There is nothing sacred about the file. Pi-Star give the user the ability to add custom entries. If I dont use Pi-Star I can edit the host file to my liking.

Pi-Star is a "repackaging" of the software from G4LKX. That is not to say Andy does not add value. He certainly does and I would venture to say that without Pi-Star (or something like it) DV hotspots would not have taken off like it did.

Steve N4IRS 

On 7/28/20 6:51 PM, Bob KK6RQ wrote:
I'm not sure I understand your answer....maybe if I rephrase--

How do I get my P25 reflector/TG to show up in the pulldown in the P25 section of the configuration screen of every Pi-Star hotspot in existence?

-Bob
KK6RQ

On Tue, Jul 28, 2020 at 4:42 PM Steve N4IRS <szingman@...> wrote:
That file starts with <https://github.com/g4klx/P25Clients/tree/master/P25Gateway> Where people get their host file depends on where they get their software.

Steve

On 7/28/20 4:41 PM, Bob KK6RQ wrote:
Thanks, that clears that up.

Another question is, what determines whether the TG shows up automatically in everyone's P25Hosts.txt (ie. "published"?)

-Bob
KK6RQ

On Tue, Jul 28, 2020 at 4:39 AM Steve N4IRS <szingman@...> wrote:
Bob,
The P25Reflector software does not actually care what TG it reflects. When the reflector sees UDP traffic on the proper port, it reflects it to all connected users.
The program that determines what TG, is actually P25Gateway in it's host file:

# 10200 North America
10200    dvswitch.org        41000

This tells P25Gateway, when you see traffic on TG 10200 send the traffic to dvswitch.org (44.103.34.4) on UDP port 41000.
As to the name, again it's in the P25Gateway host file.

73, Steve N4IRS

On 7/27/20 11:05 PM, nuhtrue@... wrote:
Hi,

I'm having some difficulty while installing the whole package (G4-somebody/dvswitch) using the 927.org instructions (which is riddled with typos);
I've read everything I've been able to google, both here and elsewhere, but I'm stuck on a concept or two:

What (and WHERE or WHO) determines what your newly installed P25 reflector's TG ID is?

I probably will choose not to publish the TG (at first, at least) but where do I give it its name? I saw a thread where Steve says some ppl are using the same #
as their chosen DMR TG (which already exists; I'm trying to link them)?

Thanks,

Bob
KK6RQ






Re: P25Reflector install help...

Bob KK6RQ
 

OK, thanks. I didn't see any reference to that in any of the docs or forum discussion. Did I miss it somewhere?

-Bob
KK6RQ


On Tue, Jul 28, 2020 at 6:15 PM Steve N4IRS <szingman@...> wrote:
Yes

On 7/28/20 7:13 PM, Bob KK6RQ wrote:
So....I need to 'submit' my reflector info to one of them to get included on that version of the file, then?

-Bob
KK6RQ

On Tue, Jul 28, 2020 at 6:01 PM Steve N4IRS <szingman@...> wrote:
Bob,
So, that's the issue. If you use Pi-Star, the host file comes from Andy Taylor MW0MWZ (The author of Pi-Star) Andy starts with the the host file from Jonathan G4KLX which is here <https://github.com/g4klx/P25Clients/blob/master/P25Gateway/P25Hosts.txt> There is nothing sacred about the file. Pi-Star give the user the ability to add custom entries. If I dont use Pi-Star I can edit the host file to my liking.

Pi-Star is a "repackaging" of the software from G4LKX. That is not to say Andy does not add value. He certainly does and I would venture to say that without Pi-Star (or something like it) DV hotspots would not have taken off like it did.

Steve N4IRS 

On 7/28/20 6:51 PM, Bob KK6RQ wrote:
I'm not sure I understand your answer....maybe if I rephrase--

How do I get my P25 reflector/TG to show up in the pulldown in the P25 section of the configuration screen of every Pi-Star hotspot in existence?

-Bob
KK6RQ

On Tue, Jul 28, 2020 at 4:42 PM Steve N4IRS <szingman@...> wrote:
That file starts with <https://github.com/g4klx/P25Clients/tree/master/P25Gateway> Where people get their host file depends on where they get their software.

Steve

On 7/28/20 4:41 PM, Bob KK6RQ wrote:
Thanks, that clears that up.

Another question is, what determines whether the TG shows up automatically in everyone's P25Hosts.txt (ie. "published"?)

-Bob
KK6RQ

On Tue, Jul 28, 2020 at 4:39 AM Steve N4IRS <szingman@...> wrote:
Bob,
The P25Reflector software does not actually care what TG it reflects. When the reflector sees UDP traffic on the proper port, it reflects it to all connected users.
The program that determines what TG, is actually P25Gateway in it's host file:

# 10200 North America
10200    dvswitch.org        41000

This tells P25Gateway, when you see traffic on TG 10200 send the traffic to dvswitch.org (44.103.34.4) on UDP port 41000.
As to the name, again it's in the P25Gateway host file.

73, Steve N4IRS

On 7/27/20 11:05 PM, nuhtrue@... wrote:
Hi,

I'm having some difficulty while installing the whole package (G4-somebody/dvswitch) using the 927.org instructions (which is riddled with typos);
I've read everything I've been able to google, both here and elsewhere, but I'm stuck on a concept or two:

What (and WHERE or WHO) determines what your newly installed P25 reflector's TG ID is?

I probably will choose not to publish the TG (at first, at least) but where do I give it its name? I saw a thread where Steve says some ppl are using the same #
as their chosen DMR TG (which already exists; I'm trying to link them)?

Thanks,

Bob
KK6RQ




2201 - 2220 of 9070