Date   

Re: ASL to P25 bridge #analog_bridge

Tom
 

Yes it is there in the downloaded P25Hosts.txt file


Re: ASL to P25 bridge #analog_bridge

Steve N4IRS
 

show me the entry.

On 8/10/20 6:44 PM, Tom wrote:
Yes in PrivateHost file


Re: ASL to P25 bridge #analog_bridge

Tom
 

Yes in PrivateHost file


Re: ASL to P25 bridge #analog_bridge

Steve N4IRS
 

in /var/lib/mmdvm/private_P25Hosts.txt
10888    reflector.ip.address    reflector.udp.port
restart the gateway

On 8/10/20 6:39 PM, Tom wrote:
The P25Gateway log says:  No response from 10888, unlinking. It doesn't seem to be able to connect to the reflector (10888).


Re: ASL to P25 bridge #analog_bridge

Steve N4IRS
 

Is 10888 in the host file?

On 8/10/20 6:39 PM, Tom wrote:
The P25Gateway log says:  No response from 10888, unlinking. It doesn't seem to be able to connect to the reflector (10888).


Re: ASL to P25 bridge #analog_bridge

Steve N4IRS
 

If you see no activity ASL --> AB the something is wrong here:
Analog_Bridge.ini       DVSwitch.ini
[AMBE_AUDIO]            [P25]          
address = 127.0.0.1 <->
Address = 127.0.0.1
txPort = 34103 <------> RXPort = 34103        
rxPort = 34100 <------> TXPort = 34100


On 8/10/20 6:30 PM, Tom wrote:
OK, I changed the AB ini file.

I can see ASL activity on AB log. I see no corresponding changes in mmdvm log.

The mmdvm log also states: Remote Gateway: no   Is that correct?

How do I test beyond AB to see ASL originated activity.

Also Activity on the Reflector don't seem to interact with the Gateway.

Tom


Re: ASL to P25 bridge #analog_bridge

Tom
 

The P25Gateway log says:  No response from 10888, unlinking. It doesn't seem to be able to connect to the reflector (10888).


Re: ASL to P25 bridge #analog_bridge

Tom
 

OK, I changed the AB ini file.

I can see ASL activity on AB log. I see no corresponding changes in mmdvm log.

The mmdvm log also states: Remote Gateway: no   Is that correct?

How do I test beyond AB to see ASL originated activity.

Also Activity on the Reflector don't seem to interact with the Gateway.

Tom


Re: ASL to P25 bridge #analog_bridge

Steve N4IRS
 

Tom,
The flow looks like this:
AB <-> MB <-> P25Gateway

Analog_Bridge.ini       DVSwitch.ini
[AMBE_AUDIO]            [P25]          
address = 127.0.0.1 <->
Address = 127.0.0.1
txPort = 34103 <------> RXPort = 34103        
rxPort = 34100 <------> TXPort = 34100

                                  MMDVM_Bridge.ini             P25Gateway.ini
                        [P25 Network]                [GENERAL]
                                 GatewayAddress=127.0.0.1 <-> RptAddress=127.0.0.1    
                        GatewayPort=42020 <--------> LocalPort=42010          
                        LocalPort=32010 <---------->
RptPort=32010


You had AB pointed at P25Gateway etc.


On 8/10/20 5:50 PM, Tom wrote:
Attached are all 5 ini files.


Re: ASL to P25 bridge #analog_bridge

Tom
 

Attached are all 5 ini files.


Re: ASL to P25 bridge #analog_bridge

Steve N4IRS
 

Show me your DVSwitch.ini

On 8/10/20 5:40 PM, Tom wrote:
Attached


Re: ASL to P25 bridge #analog_bridge

Tom
 

Attached


Re: ASL to P25 bridge #analog_bridge

Steve N4IRS
 

I need to see both logs from a fresh start to waiting for traffic. Do not truncate.

On 8/10/20 5:34 PM, Tom wrote:
root@P25reflector:/var/log/dvswitch # tail -f Analog_Bridge.log   
M: 2020-08-10 21:29:52.793 Connecting to DV3000 hardware......
W: 2020-08-10 21:29:53.800 DV3000 not found at 127.0.0.1:2460
I: 2020-08-10 21:29:54.706 Subscriber IDs loaded: 169853
I: 2020-08-10 21:29:54.706 Default extended metadata <K5TRA>
W: 2020-08-10 21:29:54.706 Using software MBE decoder version 1.2.3
W: 2020-08-10 21:29:54.706 Using software OP25 IMBE/AMBE vocoder
I: 2020-08-10 21:29:54.707 Sending to USRP clients at 127.0.0.1 on port(s) 32001
E: 2020-08-10 21:29:54.707 Can not bind port 42020, error code = 98 (Address already in use)
I: 2020-08-10 21:29:54.707 Starting TLV --> Analog_Bridge (decoder) --> USRP thread
I: 2020-08-10 21:29:54.707 Starting USRP --> Analog_Bridge (encoder) -> TLV thread

root@P25reflector:/var/log/mmdvm # tail -f MMDVM_Bridge-2020-08-10.log 
I: 2020-08-10 21:24:52.615 Loaded 169853 Ids to the DMR callsign lookup table
I: 2020-08-10 21:24:52.615 P25 RF Parameters
I: 2020-08-10 21:24:52.615 Started the DMR Id lookup reload thread
I: 2020-08-10 21:24:52.615     Id: 3148777
I: 2020-08-10 21:24:52.615     NAC: $293
I: 2020-08-10 21:24:52.615     UID Override: no
I: 2020-08-10 21:24:52.615     Self Only: no
I: 2020-08-10 21:24:52.615     Remote Gateway: no
I: 2020-08-10 21:24:52.615     Mode Hang: 10s
M: 2020-08-10 21:24:52.615 MMDVM_Bridge-20200309_V1.5.1 is running

Looks like AMBE audio port issue in AB. Should that be 34100, 34103 ?


Re: ASL to P25 bridge #analog_bridge

Tom
 

root@P25reflector:/var/log/dvswitch # tail -f Analog_Bridge.log   
M: 2020-08-10 21:29:52.793 Connecting to DV3000 hardware......
W: 2020-08-10 21:29:53.800 DV3000 not found at 127.0.0.1:2460
I: 2020-08-10 21:29:54.706 Subscriber IDs loaded: 169853
I: 2020-08-10 21:29:54.706 Default extended metadata <K5TRA>
W: 2020-08-10 21:29:54.706 Using software MBE decoder version 1.2.3
W: 2020-08-10 21:29:54.706 Using software OP25 IMBE/AMBE vocoder
I: 2020-08-10 21:29:54.707 Sending to USRP clients at 127.0.0.1 on port(s) 32001
E: 2020-08-10 21:29:54.707 Can not bind port 42020, error code = 98 (Address already in use)
I: 2020-08-10 21:29:54.707 Starting TLV --> Analog_Bridge (decoder) --> USRP thread
I: 2020-08-10 21:29:54.707 Starting USRP --> Analog_Bridge (encoder) -> TLV thread

root@P25reflector:/var/log/mmdvm # tail -f MMDVM_Bridge-2020-08-10.log 
I: 2020-08-10 21:24:52.615 Loaded 169853 Ids to the DMR callsign lookup table
I: 2020-08-10 21:24:52.615 P25 RF Parameters
I: 2020-08-10 21:24:52.615 Started the DMR Id lookup reload thread
I: 2020-08-10 21:24:52.615     Id: 3148777
I: 2020-08-10 21:24:52.615     NAC: $293
I: 2020-08-10 21:24:52.615     UID Override: no
I: 2020-08-10 21:24:52.615     Self Only: no
I: 2020-08-10 21:24:52.615     Remote Gateway: no
I: 2020-08-10 21:24:52.615     Mode Hang: 10s
M: 2020-08-10 21:24:52.615 MMDVM_Bridge-20200309_V1.5.1 is running

Looks like AMBE audio port issue in AB. Should that be 34100, 34103 ?


Re: ASL to P25 bridge #analog_bridge

Steve N4IRS
 

stop Analog_Bridge and MMDVM_Bridge. remove both logs. start Analog_Bridge and MMDVM_Bridge. Post both logs.


On 8/10/20 5:21 PM, Tom wrote:
Are these ports correct?
ASL (
USRP) 32001 RX,  34001 TX

AB
(USRP)  TX 32001, RX 34001
(AMBE AUDIO)  32010 TX , 42020 RX

MMDVM
(P25 network)  Gateway 42020, Local 32010

DVSwitch
(P25)   TX 34100,  RX 34103

P25Gateway
Repeater port 32010
Local port 42020
(Network)   Port = 42010
__________________________
Should I use my static LAN IP in all the ini files  (or loopback)?
 
The reflector on 10888 works; so why doesn't this gateway see it?

It's not clear at all where DVSwitch [P25] 34100, 34103  fits in (documentation)?

Only ASL talks to Analog_Bridge, then it breaks.

Thanks for your help 

Tom


Re: ASL to P25 bridge #analog_bridge

Tom
 

Are these ports correct?
ASL (
USRP) 32001 RX,  34001 TX

AB
(USRP)  TX 32001, RX 34001
(AMBE AUDIO)  32010 TX , 42020 RX

MMDVM
(P25 network)  Gateway 42020, Local 32010

DVSwitch
(P25)   TX 34100,  RX 34103

P25Gateway
Repeater port 32010
Local port 42020
(Network)   Port = 42010
__________________________
Should I use my static LAN IP in all the ini files  (or loopback)?
 
The reflector on 10888 works; so why doesn't this gateway see it?

It's not clear at all where DVSwitch [P25] 34100, 34103  fits in (documentation)?

Only ASL talks to Analog_Bridge, then it breaks.

Thanks for your help 

Tom


Re: ASL to P25 bridge #analog_bridge

Steve N4IRS
 

stop Analog_Bridge and MMDVM_Bridge. remove both logs. start Analog_Bridge and MMDVM_Bridge. Post both logs. 

On 8/10/20 4:25 PM, Tom wrote:
Steve,

systemctl status shows all services running (asl, analog_bridge, mmdvm, p25gateway, and p25reflector).

ASL talks to analog_bridge, and  p25reflector talks to the internet; but nothing else mutually communicates.

I believe I have all the ports set correctly.

Tom


Re: ASL to P25 bridge #analog_bridge

Tom
 

Steve,

systemctl status shows all services running (asl, analog_bridge, mmdvm, p25gateway, and p25reflector).

ASL talks to analog_bridge, and  p25reflector talks to the internet; but nothing else mutually communicates.

I believe I have all the ports set correctly.

Tom


Re: ASL to P25 bridge #analog_bridge

Tom
 

P25eflector works and ASL <-> Analog_Bridge  works; but that's all.
Tom


Re: ASL to P25 bridge #analog_bridge

Tom
 

Here are logs from MMDVM_Bridge, P25Gateway, and P25Reflector:

root@P25reflector:/var/log/mmdvm # tail -f MMDVM_Bridge-2020-08-10.log 
I: 2020-08-10 18:14:20.372 Loaded 169853 Ids to the DMR callsign lookup table
I: 2020-08-10 18:14:20.372 P25 RF Parameters
I: 2020-08-10 18:14:20.372 Started the DMR Id lookup reload thread
I: 2020-08-10 18:14:20.372     Id: 3148777
I: 2020-08-10 18:14:20.372     NAC: $293
I: 2020-08-10 18:14:20.372     UID Override: no
I: 2020-08-10 18:14:20.372     Self Only: no
I: 2020-08-10 18:14:20.372     Remote Gateway: no
I: 2020-08-10 18:14:20.372     Mode Hang: 10s
M: 2020-08-10 18:14:20.372 MMDVM_Bridge-20200309_V1.5.1 is running
^C
root@P25reflector:/var/log/mmdvm # tail -f P25Gateway-2020-08-10.log 
W: 2020-08-10 17:43:01.267 No response from 10888, unlinking
I: 2020-08-10 18:14:19.459 Opening P25 network connection
I: 2020-08-10 18:14:19.464 Opening P25 network connection
I: 2020-08-10 18:14:19.751 Loaded 13 P25 reflectors
I: 2020-08-10 18:14:19.751 Loaded P25 parrot (TG10)
I: 2020-08-10 18:14:20.223 Loaded 169853 Ids to the callsign lookup table
M: 2020-08-10 18:14:20.223 Starting P25Gateway-20180409
I: 2020-08-10 18:14:20.223 Started the DMR Id lookup reload thread
M: 2020-08-10 18:14:20.223 Linked at startup to reflector 10888
W: 2020-08-10 18:16:20.246 No response from 10888, unlinking
^C
root@P25reflector:/var/log/mmdvm # tail -f P25Reflector-2020-08-10.log 
M: 2020-08-10 18:54:20.263     K5TRA      (192.168.0.1:42010) 2/120
M: 2020-08-10 18:56:20.265 Currently linked repeaters:
M: 2020-08-10 18:56:20.265     K5TRA      (192.168.0.1:1088) 4/120
M: 2020-08-10 18:56:20.265     K5TRA      (192.168.0.1:42010) 2/120
M: 2020-08-10 18:56:54.179 Transmission started from K5TRA      (192.168.0.1:42010)
M: 2020-08-10 18:56:54.190 Transmission from K5TRA at K5TRA      to TG 10888
M: 2020-08-10 18:56:55.098 Received end of transmission
M: 2020-08-10 18:58:20.273 Currently linked repeaters:
M: 2020-08-10 18:58:20.273     K5TRA      (192.168.0.1:1088) 4/120
M: 2020-08-10 18:58:20.273     K5TRA      (192.168.0.1:42010) 2/120

2141 - 2160 of 9083