Date   

Re: ircDDBGateway log error

Derek William Haden <facebook@...>
 

Yes


Re: Cloud hosting

Tom Corcoran
 

I seem to have hit a trip wire of some sort (maybe first month free) but have exceeded BW limit in first few days of billing period and account is suspended due to exceeding BW limit. Reverted to vultr accounts. 
--
Tom VE3NY


Re: ircDDBGateway log error

Steve N4IRS
 

Is D-Star working? port: 20010 is MB -> IRCDDBGateway.
 

On 9/4/2020 10:43 AM, Derek William Haden wrote:
This is the error that I see in the 

ircDDBGateway log

I was wondering what the problem could be?



Re: ircDDBGateway log error

Derek William Haden <facebook@...>
 

This is the error that I see in the 

ircDDBGateway log

I was wondering what the problem could be?


Re: Cloud hosting

Steve N4IRS
 

On 9/4/2020 9:49 AM, Jay wrote:

Looks like everyone has gone to $2.50 a month.  Anyone have another less expensive option.  


--

jb   N4NQY


Re: Cloud hosting

Jay
 


Looks like everyone has gone to $2.50 a month.  Anyone have another less expensive option.  


--

jb   N4NQY


Re: ircDDBGateway log error

Steve N4IRS
 

What log is this?


On 9/3/2020 12:49 PM, Derek William Haden wrote:
Could you offer any insight into this

2020-09-03 16:03:53: Error returned from sendto (port: 20010), err: 22
2020-09-03 16:06:08: Cannot connect the TCP client socket, err=110


 


P25 receive audio distortion with P25 / DMR bridge

David Young
 

I am having an audio problem when using DVSwitch to bridge DMR to P25.  Audio from P25 to DMR sounds normal, but audio from DMR to P25 is very garbled and almost sounds like two digital transmissions are occurring at the same time.  I have installed the P25 / DMR bridge on 3 different Pi3b and Pi4's and have never had this problem.  This installation is being done on a cloud server and I have not been able to figure out why the audio is so garbled and distorted.  I am attaching the two analog bridge logs and all the associated *.ini files.  Any help would be appreciated.

Thanks,
--
Dave WB6DTB


ircDDBGateway log error

Derek William Haden <facebook@...>
 

Could you offer any insight into this

2020-09-03 16:03:53: Error returned from sendto (port: 20010), err: 22
2020-09-03 16:06:08: Cannot connect the TCP client socket, err=110


 


Re: Stacato audio on DVSM

Derek William Haden <facebook@...>
 

yes, the ambeserver is started by a systemd unit file.

I am out most of day tomorrow, but will give it a try before the weekend.

again thanks for all the help.


Re: 2 DMR networks

pewpewpew000@...
 

Perhaps not on opposing time slots BUT interchangeably (one or the other).

AFAIK the limitation to operating one network versus having two simultatiously is more complex of an issue.


Re: Stacato audio on DVSM

Steve N4IRS
 

I don't know if you use a systemd unit file to start/stop/restart your AMBEServer.
If you do, You could add:
ExecStartPre = /bin/sh -c 'echo "1" >> /sys/bus/usb-serial/devices/ttyUSB0/latency_timer'

to the [SERVICE] stanza in the unit file that controls AMBEServer

On 9/2/2020 10:34 AM, Derek William Haden wrote:

OK if I restart everything, from fresh reboot, with AB configured for ambe server, but ambe server not yet started.
stop AB
do echo 1 > /sys/bus/usb-serial/devices/ttyUSB0/latency_timer

start amber server and restart AB

all seems to work correctly I do not get the stacato audio.

So I am guessing that somehow the command echo 1 > /sys/bus/usb-serial/devices/ttyUSB0/latency_timer
Needs to to part of the ambe server start up? which I have no idea how to do.



Re: Stacato audio on DVSM

Derek William Haden <facebook@...>
 

OK if I restart everything, from fresh reboot, with AB configured for ambe server, but ambe server not yet started.
stop AB
do echo 1 > /sys/bus/usb-serial/devices/ttyUSB0/latency_timer

start amber server and restart AB

all seems to work correctly I do not get the stacato audio.

So I am guessing that somehow the command echo 1 > /sys/bus/usb-serial/devices/ttyUSB0/latency_timer
Needs to to part of the ambe server start up? which I have no idea how to do.


Re: Cloud hosting

Tom Corcoran
 

W8DSB ... does this mean you have all apps running in cloud. How do you access ASL node? DVSM -> DVS -> ASL?
--
Tnx Tom VE3NY


Re: Multiple private nodes one cloud server using DVSwitch Mobile - Audio Issues. #mmdvm_bridge #analog_bridge #brandmeister

Willie Sandin
 

So I copied from another location and replaced the DVSwitch.ini file and edited the two ports.  And it is working now.  No clue what caused the issue, but it is working again!


Re: Multiple private nodes one cloud server using DVSwitch Mobile - Audio Issues. #mmdvm_bridge #analog_bridge #brandmeister

Willie Sandin
 

It is. That is what is weird.

M: 2020-09-01 22:52:07.350 DMR, Opening INI file: DVSwitch.ini
...
E: 2020-09-01 22:52:07.350 DMR, ini file "DVSwitch.ini" was not found.  Fatal error exiting



Re: Multiple private nodes one cloud server using DVSwitch Mobile - Audio Issues. #mmdvm_bridge #analog_bridge #brandmeister

Steve N4IRS
 

It says it can't find the file are you sure it's in the same directory?


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Willie Sandin <dwsandin@...>
Sent: Tuesday, September 1, 2020 7:10:16 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Multiple private nodes one cloud server using DVSwitch Mobile - Audio Issues. #mmdvm_bridge #analog_bridge #brandmeister
 
Thanks for the clarification.  

Now it seems that another issue has developed.  I had everything working.  Saved copies, etc.  Then rebooted the server.  One of the 3 now has an error that I am trying to track down..

The MMDVM Bridge will not load.  Somehow it starts to load DVSwitch.ini, then loses it.

● mmdvm_bridge-n0mgj.service - MMDVM_Bridge Service
   Loaded: loaded (/lib/systemd/system/mmdvm_bridge-n0mgj.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Tue 2020-09-01 17:52:07 CDT; 5min ago
  Process: 2578 ExecStart=/opt/MMDVM_Bridge-n0mgj/MMDVM_Bridge /opt/MMDVM_Bridge-n0mgj/MMDVM_Bridge.ini (code=exited, status=1/FAILURE)
 Main PID: 2578 (code=exited, status=1/FAILURE)

Partial Log

I: 2020-09-01 22:52:07.135 DMR Id Lookups
I: 2020-09-01 22:52:07.135     File: /var/lib/mmdvm/DMRIds.dat
I: 2020-09-01 22:52:07.136     Reload: 24 hours
I: 2020-09-01 22:52:07.349 Loaded 171196 Ids to the DMR callsign lookup table
I: 2020-09-01 22:52:07.349 DMR RF Parameters
I: 2020-09-01 22:52:07.349     Id: 316747902
I: 2020-09-01 22:52:07.350     Color Code: 1
I: 2020-09-01 22:52:07.350     Self Only: no
I: 2020-09-01 22:52:07.350     Embedded LC Only: yes
I: 2020-09-01 22:52:07.350     Dump Talker Alias Data: no
I: 2020-09-01 22:52:07.350     Prefixes: 0
I: 2020-09-01 22:52:07.350     Call Hang: 3s
I: 2020-09-01 22:52:07.350     TX Hang: 3s
I: 2020-09-01 22:52:07.350     Mode Hang: 10s
M: 2020-09-01 22:52:07.350 DMR, Opening INI file: DVSwitch.ini
M: 2020-09-01 22:52:07.350 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-09-01 22:52:07.350 DMR, Setting [DMR] TXPort -> 31140
M: 2020-09-01 22:52:07.350 DMR, Setting [DMR] RXPort -> 31143
M: 2020-09-01 22:52:07.350 DMR, Setting [DMR] Slot -> 2
E: 2020-09-01 22:52:07.350 DMR, ini file "DVSwitch.ini" was not found.  Fatal error exiting

Nothing was edited in the MMDVM_Bridge.ini or DVSwitch.ini   This occurred after a reboot.

Thanks,


Re: Multiple private nodes one cloud server using DVSwitch Mobile - Audio Issues. #mmdvm_bridge #analog_bridge #brandmeister

Willie Sandin
 

Thanks for the clarification.  

Now it seems that another issue has developed.  I had everything working.  Saved copies, etc.  Then rebooted the server.  One of the 3 now has an error that I am trying to track down..

The MMDVM Bridge will not load.  Somehow it starts to load DVSwitch.ini, then loses it.

● mmdvm_bridge-n0mgj.service - MMDVM_Bridge Service
   Loaded: loaded (/lib/systemd/system/mmdvm_bridge-n0mgj.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Tue 2020-09-01 17:52:07 CDT; 5min ago
  Process: 2578 ExecStart=/opt/MMDVM_Bridge-n0mgj/MMDVM_Bridge /opt/MMDVM_Bridge-n0mgj/MMDVM_Bridge.ini (code=exited, status=1/FAILURE)
 Main PID: 2578 (code=exited, status=1/FAILURE)

Partial Log

I: 2020-09-01 22:52:07.135 DMR Id Lookups
I: 2020-09-01 22:52:07.135     File: /var/lib/mmdvm/DMRIds.dat
I: 2020-09-01 22:52:07.136     Reload: 24 hours
I: 2020-09-01 22:52:07.349 Loaded 171196 Ids to the DMR callsign lookup table
I: 2020-09-01 22:52:07.349 DMR RF Parameters
I: 2020-09-01 22:52:07.349     Id: 316747902
I: 2020-09-01 22:52:07.350     Color Code: 1
I: 2020-09-01 22:52:07.350     Self Only: no
I: 2020-09-01 22:52:07.350     Embedded LC Only: yes
I: 2020-09-01 22:52:07.350     Dump Talker Alias Data: no
I: 2020-09-01 22:52:07.350     Prefixes: 0
I: 2020-09-01 22:52:07.350     Call Hang: 3s
I: 2020-09-01 22:52:07.350     TX Hang: 3s
I: 2020-09-01 22:52:07.350     Mode Hang: 10s
M: 2020-09-01 22:52:07.350 DMR, Opening INI file: DVSwitch.ini
M: 2020-09-01 22:52:07.350 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-09-01 22:52:07.350 DMR, Setting [DMR] TXPort -> 31140
M: 2020-09-01 22:52:07.350 DMR, Setting [DMR] RXPort -> 31143
M: 2020-09-01 22:52:07.350 DMR, Setting [DMR] Slot -> 2
E: 2020-09-01 22:52:07.350 DMR, ini file "DVSwitch.ini" was not found.  Fatal error exiting

Nothing was edited in the MMDVM_Bridge.ini or DVSwitch.ini   This occurred after a reboot.

Thanks,


Re: hblink.service

Steve N4IRS
 

Show us your hblink.service file and the result of systemctl status hblink.service

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of p47thunderbolt@... <p47thunderbolt@...>
Sent: Tuesday, September 1, 2020 3:28:15 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: [DVSwitch] hblink.service
 
I have been running HBLINK on a raspberry Pi 4 for 7 months.  It has worked just fine.  I decided to put it on a server after my ISP provider kept changing my ISP address.  That's a story for another day.
I installed everything on my server and so far it appears to be working.  The only problem I am having is auto start up if the server reboots for some reason.
When on my raspberry HBLINK will automatically start upon boot up.  I cant for the life of me figure out how to do it now that it is on the server. I am sure it has to do with the hblink.service file.
I do have the systemctl working as expected.

Any help or info would be greatly appreciated.

I am fairly new at this so please take it easy on me.


hblink.service

p47thunderbolt@...
 

I have been running HBLINK on a raspberry Pi 4 for 7 months.  It has worked just fine.  I decided to put it on a server after my ISP provider kept changing my ISP address.  That's a story for another day.
I installed everything on my server and so far it appears to be working.  The only problem I am having is auto start up if the server reboots for some reason.
When on my raspberry HBLINK will automatically start upon boot up.  I cant for the life of me figure out how to do it now that it is on the server. I am sure it has to do with the hblink.service file.
I do have the systemctl working as expected.

Any help or info would be greatly appreciated.

I am fairly new at this so please take it easy on me.

1921 - 1940 of 9087