Date   

Re: Problems Connecting

 

Thanks, Steve.

Richard


Re: Problems Connecting

Steve N4IRS
 

You need to configure your extensions.conf See page 6 of this document <https://hamvoip.org/howto/iaxrpt-config.pdf>

73, Steve N4IRS

On 10/21/20 5:17 PM, RichardM wrote:

Here are iax.conf and extensions.conf

Thanks for your help.

Richard



Re: Problems Connecting

 

Here are iax.conf and extensions.conf

Thanks for your help.

Richard


Re: Problems Connecting

 

OK, fetching them both.

Richard


Re: Problems Connecting

Steve N4IRS
 

One last time.
iax.conf
extensions.conf

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of RichardM <rchrdm@...>
Sent: Wednesday, October 21, 2020 4:46:19 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Problems Connecting
 

Sorry, I thought I did read your replies.

You asked for IAX.conf and RPT.conf.  I uploaded IAX.conf above.  Is that one of the files you need?

Richard


Re: Problems Connecting

 

Sorry, I thought I did read your replies.

You asked for IAX.conf and RPT.conf.  I uploaded IAX.conf above.  Is that one of the files you need?

Richard


Re: Problems Connecting

Steve N4IRS
 

Please read my replies!


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of RichardM <rchrdm@...>
Sent: Wednesday, October 21, 2020 4:28:47 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Problems Connecting
 
Above I uploaded IAX.conf and RPT.conf.

So, that includes IAX.conf, correct?  I will get RPT.conf.

Richard


Re: Problems Connecting

 

Above I uploaded IAX.conf and RPT.conf.

So, that includes IAX.conf, correct?  I will get RPT.conf.

Richard


Re: Problems Connecting

Steve N4IRS
 

No, I need:
Iax.conf
extensions.conf


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of RichardM <rchrdm@...>
Sent: Wednesday, October 21, 2020 4:12:30 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Problems Connecting
 
We still have the same problem.

Do you have the right files now?

Richard


Re: Problems Connecting

 

We still have the same problem.

Do you have the right files now?

Richard


Re: Problems Connecting

Steve N4IRS
 

Does that mean you are no longer having a problem?

On 10/21/2020 3:43 PM, RichardM wrote:

BTW, the nodes we are working with are 519980 and 519981.

Richard



Re: Problems Connecting

 

BTW, the nodes we are working with are 519980 and 519981.

Richard


Re: Problems Connecting

Steve N4IRS
 

I need extensions.conf and iax.conf

On 10/21/2020 3:39 PM, RichardM wrote:
Here are the files.

Richard


Re: Problems Connecting

 

Here are the files.

Richard


Re: radioid.net URL update in dvswitch.sh

Steve N4IRS
 

FYI, this is the current version:
root@DVSwitch-Server:~# /opt/MMDVM_Bridge/dvswitch.sh -v
dvswitch.sh version 1.5.9


On 10/20/20 5:05 PM, k7wby@... wrote:
The complete version of how to update  dvwitch.sh with the correct urls to the RadioID.net database.

cd /opt/Analog_Bridge
ls -al (look for dvswitch.sh, if its not there then look in /opt/MMDVM_Bridge. If it's in MMDVM_Bridge then stop, you have the latest version.)
cp dvswitch.sh dvswitch.old (humor me and make a quick backup just for fun)
rm dvswitch.sh (delete the original version)
wget https://github.com/DVSwitch/MMDVM_Bridge/raw/master/dvswitch.sh
chmod +x dvswitch.sh (make it executable)
./dvswitch.sh update (if this runs and does not produce any errors then you're golden. if you get errors, then start at the beginning and try again.)

if all goes according to plan then
rm dvswitch.old 


Re: Problems Connecting

Steve N4IRS
 

Richard,
Without seeing the relevant sections of iax.conf and extensions.conf all I can say this is your clue:
[Oct 21 00:46:18] WARNING[2817]: app_rpt.c:21237 rpt_exec: Cannot find specified system node 1998


On 10/21/20 12:59 AM, RichardM wrote:
Hello

I am setting up DVSwitch to connect to an AllStar node in my house.  I can connect to it using IAXRPT on the PC, but when I try this with DVSwitch, it goes into a loop connecting and disconnecting. 

A friend looked into this and suggested that I post the following information. Can someone help us with this?

Richard

----

Message follows:

I have an Allstar node (Raspberry Pi 4) running HamVoip. I've done an update, so it's running all of the latest patches.

When I use DVSwitch to connect to my node (519980), the following error shows up in the Asterisk CLI log level 4. Note that if I have "autoload node" set to ON, the message repeats itself over and over until there is a crash.

Running DVSwitch 1.57 (130).

          Starting Asterisk client. Please type: exit<ENTER>
           when done and you will return to the admin menu.

Asterisk 1.4.23-pre.hamvoip-V1.6.2-10 app_rpt-0.327-06/01/2020, Copyright (C) 1999 - 2020 HamVoIP.org and others.
Created by Mark Spencer <markster@...>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Connected to Asterisk 1.4.23-pre.hamvoip-V1.6.2-10 app_rpt-0.327-06/01/2020 currently running on Richnode1 (pid = 2785)
Verbosity was 3 and is now 4
    -- Registered IAX2 'myphone-iaxrpt' (AUTHENTICATED) at 208.86.127.233:1025
    -- Accepting AUTHENTICATED call from 208.86.127.233:
       > requested format = unknown,
       > requested prefs = (slin|ulaw|adpcm),
       > actual format = ulaw,
       > host prefs = (ulaw),
       > priority = mine
    -- Executing [519980@phone-iaxrpt:1] Answer("IAX2/myphone-iaxrpt-314", "") in new stack
    -- Executing [519980@phone-iaxrpt:2] Playback("IAX2/myphone-iaxrpt-314", "rpt/node") in new stack
    -- <IAX2/myphone-iaxrpt-314> Playing 'rpt/node' (language 'en')
    -- Executing [519980@phone-iaxrpt:3] Playback("IAX2/myphone-iaxrpt-314", "digits/1") in new stack
    -- <IAX2/myphone-iaxrpt-314> Playing 'digits/1' (language 'en')
    -- Executing [519980@phone-iaxrpt:4] Playback("IAX2/myphone-iaxrpt-314", "digits/9") in new stack
    -- <IAX2/myphone-iaxrpt-314> Playing 'digits/9' (language 'en')
    -- Executing [519980@phone-iaxrpt:5] Playback("IAX2/myphone-iaxrpt-314", "digits/9") in new stack
    -- <IAX2/myphone-iaxrpt-314> Playing 'digits/9' (language 'en')
    -- Executing [519980@phone-iaxrpt:6] Playback("IAX2/myphone-iaxrpt-314", "digits/8") in new stack
    -- <IAX2/myphone-iaxrpt-314> Playing 'digits/8' (language 'en')
    -- Executing [519980@phone-iaxrpt:7] Set("IAX2/myphone-iaxrpt-314", "CALLERID(num)=0") in new stack
    -- Executing [519980@phone-iaxrpt:8] Rpt("IAX2/myphone-iaxrpt-314", "1998|P|KJ7PLR") in new stack
[Oct 21 00:46:18] WARNING[2817]: app_rpt.c:21237 rpt_exec: Cannot find specified system node 1998
  == Spawn extension (phone-iaxrpt, 519980, 8) exited non-zero on 'IAX2/myphone-iaxrpt-314'
    -- Hungup 'IAX2/myphone-iaxrpt-314'
Richnode1*CLI>


Problems Connecting

 

Hello

I am setting up DVSwitch to connect to an AllStar node in my house.  I can connect to it using IAXRPT on the PC, but when I try this with DVSwitch, it goes into a loop connecting and disconnecting. 

A friend looked into this and suggested that I post the following information. Can someone help us with this?

Richard

----

Message follows:

I have an Allstar node (Raspberry Pi 4) running HamVoip. I've done an update, so it's running all of the latest patches.

When I use DVSwitch to connect to my node (519980), the following error shows up in the Asterisk CLI log level 4. Note that if I have "autoload node" set to ON, the message repeats itself over and over until there is a crash.

Running DVSwitch 1.57 (130).

          Starting Asterisk client. Please type: exit<ENTER>
           when done and you will return to the admin menu.

Asterisk 1.4.23-pre.hamvoip-V1.6.2-10 app_rpt-0.327-06/01/2020, Copyright (C) 1999 - 2020 HamVoIP.org and others.
Created by Mark Spencer <markster@...>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Connected to Asterisk 1.4.23-pre.hamvoip-V1.6.2-10 app_rpt-0.327-06/01/2020 currently running on Richnode1 (pid = 2785)
Verbosity was 3 and is now 4
    -- Registered IAX2 'myphone-iaxrpt' (AUTHENTICATED) at 208.86.127.233:1025
    -- Accepting AUTHENTICATED call from 208.86.127.233:
       > requested format = unknown,
       > requested prefs = (slin|ulaw|adpcm),
       > actual format = ulaw,
       > host prefs = (ulaw),
       > priority = mine
    -- Executing [519980@phone-iaxrpt:1] Answer("IAX2/myphone-iaxrpt-314", "") in new stack
    -- Executing [519980@phone-iaxrpt:2] Playback("IAX2/myphone-iaxrpt-314", "rpt/node") in new stack
    -- <IAX2/myphone-iaxrpt-314> Playing 'rpt/node' (language 'en')
    -- Executing [519980@phone-iaxrpt:3] Playback("IAX2/myphone-iaxrpt-314", "digits/1") in new stack
    -- <IAX2/myphone-iaxrpt-314> Playing 'digits/1' (language 'en')
    -- Executing [519980@phone-iaxrpt:4] Playback("IAX2/myphone-iaxrpt-314", "digits/9") in new stack
    -- <IAX2/myphone-iaxrpt-314> Playing 'digits/9' (language 'en')
    -- Executing [519980@phone-iaxrpt:5] Playback("IAX2/myphone-iaxrpt-314", "digits/9") in new stack
    -- <IAX2/myphone-iaxrpt-314> Playing 'digits/9' (language 'en')
    -- Executing [519980@phone-iaxrpt:6] Playback("IAX2/myphone-iaxrpt-314", "digits/8") in new stack
    -- <IAX2/myphone-iaxrpt-314> Playing 'digits/8' (language 'en')
    -- Executing [519980@phone-iaxrpt:7] Set("IAX2/myphone-iaxrpt-314", "CALLERID(num)=0") in new stack
    -- Executing [519980@phone-iaxrpt:8] Rpt("IAX2/myphone-iaxrpt-314", "1998|P|KJ7PLR") in new stack
[Oct 21 00:46:18] WARNING[2817]: app_rpt.c:21237 rpt_exec: Cannot find specified system node 1998
  == Spawn extension (phone-iaxrpt, 519980, 8) exited non-zero on 'IAX2/myphone-iaxrpt-314'
    -- Hungup 'IAX2/myphone-iaxrpt-314'
Richnode1*CLI>


Re: radioid.net URL update in dvswitch.sh

k7wby@...
 

The complete version of how to update  dvwitch.sh with the correct urls to the RadioID.net database.

cd /opt/Analog_Bridge
ls -al (look for dvswitch.sh, if its not there then look in /opt/MMDVM_Bridge. If it's in MMDVM_Bridge then stop, you have the latest version.)
cp dvswitch.sh dvswitch.old (humor me and make a quick backup just for fun)
rm dvswitch.sh (delete the original version)
wget https://github.com/DVSwitch/MMDVM_Bridge/raw/master/dvswitch.sh
chmod +x dvswitch.sh (make it executable)
./dvswitch.sh update (if this runs and does not produce any errors then you're golden. if you get errors, then start at the beginning and try again.)

if all goes according to plan then
rm dvswitch.old 


Re: radioid.net URL update in dvswitch.sh

k7wby@...
 

don't forget to chmod +x dvswitch.sh


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

EA5GVK Joaquin
 

New DVLink Multilanguage Image Update V.9.9, via OTAP -Internet or download image also.
change log
http://ea5gvk-dmr.zigor.es/2020/10/09/actualizacion-imagen-dvlink-v-9-9-en-todas-sus-distribuciones/

Image available for Raspberry Pi-Zero, Pi 2/3/4, Virtual Box and Orange Pi PC.

https://www.youtube.com/watch?v=aRFSTSGzp8w&feature=emb_logo

Greetings and many thanks to Steve, Mike and all the members

3661 - 3680 of 10913