Date   

Re: #mmdvm_bridge #mmdvm_bridge

k7wby@...
 

You have two instances of MB created in two separate folders. Did you disable the original mmdvm_bridge service and create the two new ones that are needed for the two separate bridges?


Re: #mmdvm_bridge #mmdvm_bridge

swinger72@...
 

i just tried again on the old server and its caused the same problem


Re: #mmdvm_bridge #mmdvm_bridge

swinger72@...
 

Yes but recently mooved the ysfreflector on datacenter. The reason why now we seen this is issue is because  about 2 weeks ago i just close my bridge with brandmeister and all of this users  now pass by the dmr2ysf to reach my network


Re: #mmdvm_bridge #mmdvm_bridge

Steve N4IRS
 

You do not need YSFGateway. Are you saying this has been working over a year with ysf2dmr clients?

On 10/30/20 4:21 PM, swinger72@... wrote:
i point each mbridge directly to the ysfreflector ip .mb2 is local in the same server .my question is it is possible that is because i do not pass by ysfgateway? I have been working this way for 1 year now


Re: #mmdvm_bridge #mmdvm_bridge

swinger72@...
 

i point each mbridge directly to the ysfreflector ip .mb2 is local in the same server .my question is it is possible that is because i do not pass by ysfgateway? I have been working this way for 1 year now


Re: #mmdvm_bridge #mmdvm_bridge

Steve N4IRS
 

OK

On 10/30/2020 2:11 PM, swinger72@... wrote:
No im running in the same server as my ysfreflector


Re: #mmdvm_bridge #mmdvm_bridge

swinger72@...
 

No im running in the same server as my ysfreflector


Re: #mmdvm_bridge #mmdvm_bridge

Steve N4IRS
 

Are you using YSFGateway with mbridge2? I see this:

[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress=127.0.0.1
GatewayPort=42000
Debug=1

On 10/30/2020 2:03 PM, swinger72@... wrote:
mbridge2.ini
[General]
Callsign=va2tb
Id=302252804
Timeout=180
Duplex=0

[Info]
RXFrequency=000000000
TXFrequency=000000000
Power=1
Latitude=41.7333
Longitude=-50.3999
Height=0
Location=
Description=MMDVM_Bridge
URL=https:

[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/MMDVM_Bridge2
FileRoot=MMDVM_Bridge

[DMR Id Lookup]
File=/opt/DMRIds.dat
Time=24

[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24

[Modem]
Port=/dev/null
RSSIMappingFile=/dev/null
Trace=0
Debug=0

[D-Star]
Enable=0
Module=B

[DMR]
Enable=0
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

[System Fusion]
Enable=1

[P25]
Enable=0
NAC=293

[NXDN]
Enable=0
RAN=1
Id=12345

[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0

[DMR Network]
Enable=0
Address=hblink.dvswitch.org
Port=62031
Jitter=360
Local=62032
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0

[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress=127.0.0.1
GatewayPort=42000
Debug=1

[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0

[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020

Dvswitch
; MMDVM_Bridge export / import configuration file.
;   This file should be placed along side of MMDVM_Bridge or you can supply
;   an absolute path in the DVSWITCH environment variable, e.g:
;   DVSWITCH=/etc/MMDVM_Bridge/DVSwitch.ini
;   before executing MMDVM_Bridge
;
; Another method to set the enviorment variable is to use the systemd unit file
; by adding:
; Environment=DVSWITCH=/etc/MMDVM_Bridge/DVSwitch.ini
; to /lib/systemd/system/mmdvm_bridge.service

; Configure the Quantar Repeater Partner
; Note that the TX and RX ports are already reversed for MMDVM_Bridge <--> Quantar_Bridge
[QUANTAR]
address = 0.0.0.0               ; Address to send IMBE TLV frames to (export)
txPort = 34103                  ; Port to send IMBE TLV frames to (export)
rxPort = 34100                  ; Port to listen for IMBE TLV frames on (import)
quantarPort = 1994              ; HDLC frames To/From the Quantar repeater
debug = 0                       ; Debug 0 = off, 1 = on (adds lots of additional messages)
logLevel = 2                    ; Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
logFilePath = /var/log/dvswitch/Quantar_Bridge.log

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 31100                  ; Port to send AMBE TLV frames to (export)
rxPort = 31103                  ; Port to listen on (import)
slot = 2                        ; Export slot
exportTG = 0                    ; Which TG to export
hangTimerInFrames = 0        ; Use 50 for 3 seconds of hang time (3000 / 60)
talkerAlias = %callsign %location %description ; Get callsign location and description from MMDVM_Bridge.ini

; Configure the D-Star Partner
; Audio format is AMBE 48 bit (DSAMBE)
[DSTAR]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 32100                  ; Port to send AMBE TLV frames to (export)
rxPort = 32103                  ; Port to listen on (import)
fallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
exportTG = 9                    ; Which TG to export
slot = 2                        ; Export slot
RemotePort = 54321        ; Port to send Gateway commands to
message = %location %description ; Get location and description from MMDVM_Bridge.ini

; Configure the NXDN Partner
; Audio format is AMBE 72 bit
[NXDN]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 33100                  ; Port to send AMBE TLV frames to (export)
rxPort = 33103                  ; Port to listen on (import)
fallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
nxdnFallbackID  = 12345         ; Use this ID when the input DMR ID is not found in the database
translate = 1234=4321           ; Translate NXDN TG < -- > DMR TG (bidirectional)
slot = 2                        ; Export slot
RemotePort = 6075        ; Port to send Gateway commands to

; Configure the P25 Partner
; Audio format is IMBE 88 bit
[P25]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 34100                  ; Port to send AMBE TLV frames to (export)
rxPort = 34103                  ; Port to listen on (import)
slot = 2                        ; Export slot
RemotePort = 6074        ; Port to send Gateway commands to

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 43500                  ; Port to send AMBE TLV frames to (export)
rxPort = 42500                  ; Port to listen on (import)
txWidePort = 43500        ; Port to send IMBE TLV frames to for YSFw (export)
fallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
exportTG = 1234                    ; Which TG to export
slot = 2                        ; Export slot
RemotePort = 6073        ; Port to send Gateway commands to


Re: #mmdvm_bridge #mmdvm_bridge

swinger72@...
 

mbridge2.ini
[General]
Callsign=va2tb
Id=302252804
Timeout=180
Duplex=0

[Info]
RXFrequency=000000000
TXFrequency=000000000
Power=1
Latitude=41.7333
Longitude=-50.3999
Height=0
Location=
Description=MMDVM_Bridge
URL=https:

[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/MMDVM_Bridge2
FileRoot=MMDVM_Bridge

[DMR Id Lookup]
File=/opt/DMRIds.dat
Time=24

[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24

[Modem]
Port=/dev/null
RSSIMappingFile=/dev/null
Trace=0
Debug=0

[D-Star]
Enable=0
Module=B

[DMR]
Enable=0
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

[System Fusion]
Enable=1

[P25]
Enable=0
NAC=293

[NXDN]
Enable=0
RAN=1
Id=12345

[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0

[DMR Network]
Enable=0
Address=hblink.dvswitch.org
Port=62031
Jitter=360
Local=62032
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0

[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=3200
GatewayAddress=127.0.0.1
GatewayPort=42000
Debug=1

[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0

[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020

Dvswitch
; MMDVM_Bridge export / import configuration file.
;   This file should be placed along side of MMDVM_Bridge or you can supply
;   an absolute path in the DVSWITCH environment variable, e.g:
;   DVSWITCH=/etc/MMDVM_Bridge/DVSwitch.ini
;   before executing MMDVM_Bridge
;
; Another method to set the enviorment variable is to use the systemd unit file
; by adding:
; Environment=DVSWITCH=/etc/MMDVM_Bridge/DVSwitch.ini
; to /lib/systemd/system/mmdvm_bridge.service

; Configure the Quantar Repeater Partner
; Note that the TX and RX ports are already reversed for MMDVM_Bridge <--> Quantar_Bridge
[QUANTAR]
address = 0.0.0.0               ; Address to send IMBE TLV frames to (export)
txPort = 34103                  ; Port to send IMBE TLV frames to (export)
rxPort = 34100                  ; Port to listen for IMBE TLV frames on (import)
quantarPort = 1994              ; HDLC frames To/From the Quantar repeater
debug = 0                       ; Debug 0 = off, 1 = on (adds lots of additional messages)
logLevel = 2                    ; Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
logFilePath = /var/log/dvswitch/Quantar_Bridge.log

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 31100                  ; Port to send AMBE TLV frames to (export)
rxPort = 31103                  ; Port to listen on (import)
slot = 2                        ; Export slot
exportTG = 0                    ; Which TG to export
hangTimerInFrames = 0        ; Use 50 for 3 seconds of hang time (3000 / 60)
talkerAlias = %callsign %location %description ; Get callsign location and description from MMDVM_Bridge.ini

; Configure the D-Star Partner
; Audio format is AMBE 48 bit (DSAMBE)
[DSTAR]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 32100                  ; Port to send AMBE TLV frames to (export)
rxPort = 32103                  ; Port to listen on (import)
fallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
exportTG = 9                    ; Which TG to export
slot = 2                        ; Export slot
RemotePort = 54321        ; Port to send Gateway commands to
message = %location %description ; Get location and description from MMDVM_Bridge.ini

; Configure the NXDN Partner
; Audio format is AMBE 72 bit
[NXDN]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 33100                  ; Port to send AMBE TLV frames to (export)
rxPort = 33103                  ; Port to listen on (import)
fallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
nxdnFallbackID  = 12345         ; Use this ID when the input DMR ID is not found in the database
translate = 1234=4321           ; Translate NXDN TG < -- > DMR TG (bidirectional)
slot = 2                        ; Export slot
RemotePort = 6075        ; Port to send Gateway commands to

; Configure the P25 Partner
; Audio format is IMBE 88 bit
[P25]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 34100                  ; Port to send AMBE TLV frames to (export)
rxPort = 34103                  ; Port to listen on (import)
slot = 2                        ; Export slot
RemotePort = 6074        ; Port to send Gateway commands to

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 43500                  ; Port to send AMBE TLV frames to (export)
rxPort = 42500                  ; Port to listen on (import)
txWidePort = 43500        ; Port to send IMBE TLV frames to for YSFw (export)
fallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
exportTG = 1234                    ; Which TG to export
slot = 2                        ; Export slot
RemotePort = 6073        ; Port to send Gateway commands to


Re: #mmdvm_bridge #mmdvm_bridge

swinger72@...
 

mbridge 1.ini
[General]
Callsign=VA2TB
Id=302252802
Timeout=180
Duplex=0

[Info]
RXFrequency=000000000
TXFrequency=000000000
Power=1
Latitude=41.7333
Longitude=-50.3999
Height=0
Location=
Description=MMDVM_Bridge
URL=https:

[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/MMDVM_Bridge
FileRoot=MMDVM_Bridge

[DMR Id Lookup]
File=/opt/DMRIds.dat
Time=24

[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24

[Modem]
Port=/dev/null
RSSIMappingFile=/dev/null
Trace=0
Debug=0

[D-Star]
Enable=0
Module=B

[DMR]
Enable=0
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

[System Fusion]
Enable=1

[P25]
Enable=0
NAC=293

[NXDN]
Enable=0
RAN=1
Id=12345

[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0

[DMR Network]
Enable=0
Address=hblink.dvswitch.org
Port=62031
Jitter=360
Local=62032
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0

[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=42200
GatewayAddress=151.80.143.185
GatewayPort=42002
Debug=1

[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0

[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020

dvswitch
; MMDVM_Bridge export / import configuration file.
;   This file should be placed along side of MMDVM_Bridge or you can supply
;   an absolute path in the DVSWITCH environment variable, e.g:
;   DVSWITCH=/etc/MMDVM_Bridge/DVSwitch.ini
;   before executing MMDVM_Bridge
;
; Another method to set the enviorment variable is to use the systemd unit file
; by adding:
; Environment=DVSWITCH=/etc/MMDVM_Bridge/DVSwitch.ini
; to /lib/systemd/system/mmdvm_bridge.service

; Configure the Quantar Repeater Partner
; Note that the TX and RX ports are already reversed for MMDVM_Bridge <--> Quantar_Bridge
[QUANTAR]
address = 0.0.0.0               ; Address to send IMBE TLV frames to (export)
txPort = 34103                  ; Port to send IMBE TLV frames to (export)
rxPort = 34100                  ; Port to listen for IMBE TLV frames on (import)
quantarPort = 1994              ; HDLC frames To/From the Quantar repeater
debug = 0                       ; Debug 0 = off, 1 = on (adds lots of additional messages)
logLevel = 2                    ; Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
logFilePath = /var/log/dvswitch/Quantar_Bridge.log

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 31100                  ; Port to send AMBE TLV frames to (export)
rxPort = 31103                  ; Port to listen on (import)
slot = 2                        ; Export slot
exportTG = 0                    ; Which TG to export
hangTimerInFrames = 0        ; Use 50 for 3 seconds of hang time (3000 / 60)
talkerAlias = %callsign %location %description ; Get callsign location and description from MMDVM_Bridge.ini

; Configure the D-Star Partner
; Audio format is AMBE 48 bit (DSAMBE)
[DSTAR]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 32100                  ; Port to send AMBE TLV frames to (export)
rxPort = 32103                  ; Port to listen on (import)
fallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
exportTG = 9                    ; Which TG to export
slot = 2                        ; Export slot
RemotePort = 54321        ; Port to send Gateway commands to
message = %location %description ; Get location and description from MMDVM_Bridge.ini

; Configure the NXDN Partner
; Audio format is AMBE 72 bit
[NXDN]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 33100                  ; Port to send AMBE TLV frames to (export)
rxPort = 33103                  ; Port to listen on (import)
fallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
nxdnFallbackID  = 12345         ; Use this ID when the input DMR ID is not found in the database
translate = 1234=4321           ; Translate NXDN TG < -- > DMR TG (bidirectional)
slot = 2                        ; Export slot
RemotePort = 6075        ; Port to send Gateway commands to

; Configure the P25 Partner
; Audio format is IMBE 88 bit
[P25]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 34100                  ; Port to send AMBE TLV frames to (export)
rxPort = 34103                  ; Port to listen on (import)
slot = 2                        ; Export slot
RemotePort = 6074        ; Port to send Gateway commands to

; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 42500                  ; Port to send AMBE TLV frames to (export)
rxPort = 43500                  ; Port to listen on (import)
txWidePort = 42500        ; Port to send IMBE TLV frames to for YSFw (export)
fallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
exportTG = 1234                    ; Which TG to export
slot = 2                        ; Export slot
RemotePort = 6073        ; Port to send Gateway commands to


Re: #mmdvm_bridge #mmdvm_bridge

Steve N4IRS
 

Just in case, please include copies of the MB.ini and the DVSwitch.ini for each directory. Based on the fact that a normal user does not have the issue, makes me think it's a bug somewhere. I can tell you taht it will be at least a few days before it can even be looked at.
Steve

On 10/30/2020 10:52 AM, swinger72@... wrote:
Each instance running in separate folder. On mb2 i see my id 3022260 and in log mb1 crash i see 302226 ? Midsing number 


Re: #mmdvm_bridge #mmdvm_bridge

swinger72@...
 

Each instance running in separate folder. On mb2 i see my id 3022260 and in log mb1 crash i see 302226 ? Midsing number 


Re: #mmdvm_bridge #mmdvm_bridge

Steve N4IRS
 

I don't think they are trying to share .ini files since each instance of MB will need DVSwitch.ini to define a unique set of ports. Also, he reports that a normal user (not using DMR2YSF) has no problem.

On 10/30/2020 10:07 AM, k7wby@... wrote:
Looks like 2 MB's trying to run at the same time in the same namespace.


Re: #mmdvm_bridge #mmdvm_bridge

k7wby@...
 

Looks like 2 MB's trying to run at the same time in the same namespace.


Re: #mmdvm_bridge #mmdvm_bridge

swinger72@...
 

dmr2ysf connected to fusioncanadafr ysf reflector

Her Mbridge1 CRASH
I: 2020-10-29 21:49:05.051 MMDVM_Bridge:
I: 2020-10-29 21:49:05.051 Portions Copyright (C) 2018, 2019, 2020 DVSwitch, INAD.
I: 2020-10-29 21:49:05.051 Hacks by Mike N4IRR and Steve N4IRS
I: 2020-10-29 21:49:05.051 =
I: 2020-10-29 22:07:11.755 This software is for use on amateur radio networks only,
I: 2020-10-29 22:07:11.755 it is to be used for educational purposes only. Its use on
I: 2020-10-29 22:07:11.755 commercial networks is strictly prohibited.
I: 2020-10-29 22:07:11.755 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2020-10-29 22:07:11.755 MMDVM_Bridge-20200727_V1.5.9 is starting
M: 2020-10-29 22:07:11.755 Built 16:22:31 Oct 23 2020 (GitID #0ea07ac)
I: 2020-10-29 22:07:11.755 General Parameters
I: 2020-10-29 22:07:11.755     Callsign: VA2TB
I: 2020-10-29 22:07:11.755     Id: 302252804
I: 2020-10-29 22:07:11.755     Duplex: no
I: 2020-10-29 22:07:11.755     Timeout: 180s
I: 2020-10-29 22:07:11.755     D-Star: disabled
I: 2020-10-29 22:07:11.755     DMR: disabled
I: 2020-10-29 22:07:11.755     YSF: enabled
I: 2020-10-29 22:07:11.755     P25: disabled
I: 2020-10-29 22:07:11.755     NXDN: disabled
I: 2020-10-29 22:07:11.755 Modem Parameters
I: 2020-10-29 22:07:11.755     Port: /dev/null
I: 2020-10-29 22:07:11.755     RX Invert: no
I: 2020-10-29 22:07:11.755     TX Invert: no
I: 2020-10-29 22:07:11.755     PTT Invert: no
I: 2020-10-29 22:07:11.755     TX Delay: 100ms
I: 2020-10-29 22:07:11.755     RX Offset: 0Hz
I: 2020-10-29 22:07:11.755     TX Offset: 0Hz
I: 2020-10-29 22:07:11.755     RX DC Offset: 0
I: 2020-10-29 22:07:11.755     TX DC Offset: 0
I: 2020-10-29 22:07:11.755     RF Level: 100.0%
I: 2020-10-29 22:07:11.755     DMR Delay: 0 (0.0ms)
I: 2020-10-29 22:07:11.755     RX Level: 50.0%
I: 2020-10-29 22:07:11.755     CW Id TX Level: 50.0%
I: 2020-10-29 22:07:11.755     D-Star TX Level: 50.0%
I: 2020-10-29 22:07:11.755     DMR TX Level: 50.0%
I: 2020-10-29 22:07:11.755     YSF TX Level: 50.0%
I: 2020-10-29 22:07:11.755     P25 TX Level: 50.0%
I: 2020-10-29 22:07:11.755     NXDN TX Level: 50.0%
I: 2020-10-29 22:07:11.755     RX Frequency: 0Hz (0Hz)
I: 2020-10-29 22:07:11.756     TX Frequency: 0Hz (0Hz)
M: 2020-10-29 22:07:11.756 Opening the MMDVM
I: 2020-10-29 22:07:11.756 Display Parameters
I: 2020-10-29 22:07:11.756     Type:
I: 2020-10-29 22:07:11.756 System Fusion Network Parameters
I: 2020-10-29 22:07:11.756     Local Address: 0
I: 2020-10-29 22:07:11.756     Local Port: 3200
I: 2020-10-29 22:07:11.756     Gateway Address: 127.0.0.1
I: 2020-10-29 22:07:11.756     Gateway Port: 42000
I: 2020-10-29 22:07:11.756     Mode Hang: 3s
M: 2020-10-29 22:07:11.756 Opening YSF network connection
I: 2020-10-29 22:07:11.756 RSSI
I: 2020-10-29 22:07:11.756     Mapping File: /dev/null
I: 2020-10-29 22:07:11.756 Loaded 0 RSSI data mapping points from /dev/null
I: 2020-10-29 22:07:11.756 DMR Id Lookups
I: 2020-10-29 22:07:11.756     File: /opt/DMRIds.dat
I: 2020-10-29 22:07:11.756     Reload: 24 hours
I: 2020-10-29 22:07:11.810 Loaded 89800 Ids to the DMR callsign lookup table
I: 2020-10-29 22:07:11.810 YSF RF Parameters
I: 2020-10-29 22:07:11.810     Low Deviation: no
I: 2020-10-29 22:07:11.810     Remote Gateway: no
I: 2020-10-29 22:07:11.811     Self Only: no
I: 2020-10-29 22:07:11.811     DSQ: no
I: 2020-10-29 22:07:11.811     Mode Hang: 10s
M: 2020-10-29 22:07:11.811 YSF, Opening INI file: DVSwitch.ini
M: 2020-10-29 22:07:11.811 YSF, Setting [YSF] address -> 127.0.0.1
M: 2020-10-29 22:07:11.811 YSF, Setting [YSF] txPort -> 43500
M: 2020-10-29 22:07:11.811 YSF, Setting [YSF] rxPort -> 42500
M: 2020-10-29 22:07:11.811 YSF, Setting [YSF] txWidePort -> 43500
M: 2020-10-29 22:07:11.811 YSF, Setting [YSF] fallbackID -> 1234567
M: 2020-10-29 22:07:11.811 YSF, Setting [YSF] exportTG -> 1234
M: 2020-10-29 22:07:11.811 YSF, Setting [YSF] slot -> 2
M: 2020-10-29 22:07:11.811 YSF, Setting [YSF] RemotePort -> 6073
M: 2020-10-29 22:07:11.811 YSF, Transmitting on 127.0.0.1:43500, and listening on port 42500.  Result = 1
M: 2020-10-29 22:07:11.811 MMDVM_Bridge-20200727_V1.5.9 is running
I: 2020-10-29 22:07:11.811 Started the DMR Id lookup reload thread
D: 2020-10-29 22:07:16.813 YSF Network Poll Sent
D: 2020-10-29 22:07:16.813 0000:  59 53 46 50 56 41 32 54 42 20 20 20 20 20          *YSFPVA2TB     *
M: 2020-10-29 22:07:19.945 YSF, TX state = ON
I: 2020-10-29 22:07:19.945 YSF, Begin TX: src=1234567 rpt=0 dst=1234 slot=2 cc=0 metadata=302226
M: 2020-10-29 22:07:19.945 YSF, No call or id found, using ini value: VA2TB     ▒▒
D: 2020-10-29 22:07:20.179 YSF Network Data Sent
D: 2020-10-29 22:07:20.179 0000:  59 53 46 44 56 41 32 54 42 20 20 20 20 20 56 41    *YSFDVA2TB     VA*
D: 2020-10-29 22:07:20.179 0010:  32 54 42 20 20 20 20 20 41 4C 4C 00 00 00 00 00    *2TB     ALL.....*
D: 2020-10-29 22:07:20.179 0020:  00 00 00 D4 71 C9 63 4D 21 36 5C 9A 1A 31 21 A0    *....q.cM!6\..1!.*
D: 2020-10-29 22:07:20.179 0030:  D7 DD CF B5 90 9C 5C 4B A6 03 73 D1 4F C5 11 9A    *......\K..s.O...*
D: 2020-10-29 22:07:20.179 0040:  F7 F3 F8 F7 50 1E 53 11 8D 48 DF 23 63 C0 17 60    *....P.S..H.#c..`*
D: 2020-10-29 22:07:20.179 0050:  7F 1C 88 BA A5 E0 47 56 92 26 FF 9B B9 A8 5A BA    *......GV.&....Z.*
D: 2020-10-29 22:07:20.179 0060:  46 92 10 14 BE E5 AA 2C D3 46 B1 19 9C 75 75 A8    *F......,.F...uu.*
D: 2020-10-29 22:07:20.179 0070:  F7 7F B8 11 10 F2 C6 40 DF 08 3E E8 AB C9 91 8F    *.......@..>.....*
D: 2020-10-29 22:07:20.180 0080:  3D EF 0E 84 25 1E 49 94 64 25 86 F6 03 57 0E 22    *=...%.I.d%...W."*
D: 2020-10-29 22:07:20.180 0090:  C1 A4 13 73 F6 0D FB D5 89 01 93                   *...s.......*
D: 2020-10-29 22:07:20.266 YSF Network Data Sent
D: 2020-10-29 22:07:20.266 0000:  59 53 46 44 56 41 32 54 42 20 20 20 20 20 56 41    *YSFDVA2TB     VA*
D: 2020-10-29 22:07:20.266 0010:  32 54 42 20 20 20 20 20 41 4C 4C 00 00 00 00 00    *2TB     ALL.....*
D: 2020-10-29 22:07:20.266 0020:  00 00 02 D4 71 C9 63 4D 11 C6 5C 73 65 F2 B1 A0    *....q.cM..\se...*
D: 2020-10-29 22:07:20.266 0030:  A0 23 8E 45 93 98 C6 07 66 01 ED FA C5 05 11 6F    *.#.E....f......o*
D: 2020-10-29 22:07:20.266 0040:  BF E7 7B FC 86 E1 7B B2 8E 43 36 E4 A2 39 78 49    *..{...{..C6..9xI*
D: 2020-10-29 22:07:20.266 0050:  33 68 32 48 53 58 79 6D 7B B2 8E 43 36 E4 A2 39    *3h2HSXym{..C6..9*
D: 2020-10-29 22:07:20.267 0060:  78 49 33 68 32 A9 F0 EB FD CE 7B B2 8E 43 36 E4    *xI3h2.....{..C6.*
D: 2020-10-29 22:07:20.267 0070:  A2 39 78 49 33 68 32 18 FB 30 1A 57 59 90 AC 61    *.9xI3h2..0.WY..a*
D: 2020-10-29 22:07:20.267 0080:  14 C5 A2 39 78 4D 77 68 36 34 DF 19 46 E0 7B B2    *...9xMwh64..F.{.*
D: 2020-10-29 22:07:20.267 0090:  8E 43 36 E4 A2 39 78 49 33 68 32                   *.C6..9xI3h2*
I: 2020-10-29 22:07:20.267 YSF, Narrow transmit (72 bit)
Segmentation fault (core dumped)




Re: #mmdvm_bridge #mmdvm_bridge

swinger72@...
 

ok i do that tonight and i leave you both side log from mb1 and 2 .Thank s for your help. :)


Re: #mmdvm_bridge #mmdvm_bridge

Steve N4IRS
 

OK,
I need you to turn on debugging for MMDVM_Bridge2
[System Fusion Network]
Enable=0
LocalAddress=0
LocalPort=3200
GatewayAddress=127.0.0.1
GatewayPort=4200
Debug=1

Then run MMDVM_Bridge2 in the foreground. Capture ALL of the information from the start of MMDVM_Bridge2 until the crash. Please post the results.

Steve


On 10/29/2020 3:11 PM, swinger72@... wrote:
On Thu, Oct 29, 2020 at 03:06 PM, Steve N4IRS wrote:
So, it's like this:

dmr2ysf  <-> (F1ZIT YSF Reflector) <-> MMDVM_Bridge1 <-> MMDVM_Bridge2 <-> (fusion canada fr ysfreflector) <-> user2

When dmr2ysf transmits, MMDVM_Bridge1 passes the data OK. MMDVM_Bridge2 crashes.

Do I have that correct?

On 10/29/2020 2:59 PM, swinger72@... wrote:
Ok i use mbridge 1 connected to  f1zit ysfreflector network. Mbridge 2 connected to my own  fusion canada fr ysfreflector
So  mbridge 1 and 2 run in my own server localy .mbridge1 rxport 42500tx43500 mbridge 2 rx 43500 tx 42500

 Yep correct.  If i connect dmr2ysf to F1ZIT ysfreflector  the mb2 crash. If i connect dmr2ysf to Fusioncanadafr ysfreflector so mb2 is ok and mb1 crash.


Re: #mmdvm_bridge #mmdvm_bridge

swinger72@...
 

Yes fusion ysf to ysf dn or wide work perfectly


Re: #mmdvm_bridge #mmdvm_bridge

Steve N4IRS
 

And a regular YSF user does not crash?

On 10/29/2020 3:14 PM, swinger72@... wrote:
Sorry i use the cell phone i hit the wrong button. Yes your right
When i use dmr2ysf connected to F1ZIT YSFREFLECTOR  MB1 ok and mb2 crash. If i connect dmr2ysf to fusioncanada fr ysfreflector mb 2 ok mb1 crash 


Re: #mmdvm_bridge #mmdvm_bridge

swinger72@...
 

Sorry i use the cell phone i hit the wrong button. Yes your right
When i use dmr2ysf connected to F1ZIT YSFREFLECTOR  MB1 ok and mb2 crash. If i connect dmr2ysf to fusioncanada fr ysfreflector mb 2 ok mb1 crash 

2601 - 2620 of 9925