Date   

Re: time out on an allstar node with dvswitch

Jed Barton
 

so the connection to what ever node i have connect to is fine, it's
the connection between my client and my node is going away. Any
thoughts?

On 12/3/20, Corey Dean N3FE <n3fe@padmr.com> wrote:
I am a little confused. Is the connection to dvswitch and asl disconnecting
or dvswitch to whatever you are connecting to?
On Dec 3, 2020, at 11:08 AM, Jed Barton <jedbarton@gmail.com> wrote:

Hey guys, Hoping someone cn help. So i have my node setup so i can
connect through dv switch. OK cool, it works. What i notice, after
being connected for a few minutes, it times out, and i have to
re-connect. Is this normal, can it be fixed? I'd like to leave it
connected without having to change this all the time. Any thoughts?

Cheers,

Jed







Re: time out on an allstar node with dvswitch

Corey Dean N3FE
 

I am a little confused. Is the connection to dvswitch and asl disconnecting or dvswitch to whatever you are connecting to?

On Dec 3, 2020, at 11:08 AM, Jed Barton <jedbarton@gmail.com> wrote:

Hey guys, Hoping someone cn help. So i have my node setup so i can
connect through dv switch. OK cool, it works. What i notice, after
being connected for a few minutes, it times out, and i have to
re-connect. Is this normal, can it be fixed? I'd like to leave it
connected without having to change this all the time. Any thoughts?

Cheers,

Jed



time out on an allstar node with dvswitch

Jed Barton
 

Hey guys, Hoping someone cn help. So i have my node setup so i can
connect through dv switch. OK cool, it works. What i notice, after
being connected for a few minutes, it times out, and i have to
re-connect. Is this normal, can it be fixed? I'd like to leave it
connected without having to change this all the time. Any thoughts?

Cheers,

Jed


Re: DVLink on VPS

Corey Dean N3FE
 

It is being developed in Debian.  I would think if a users wants it on something else they can feel free to port it.


On Dec 3, 2020, at 2:08 AM, EA5GVK Joaquin <ea5gvk@...> wrote:


Yes, we are working on it. In the next version it will be possible on any platform.
Greetings.

El jue, 3 dic 2020 a las 1:17, <Iz8thd@...> escribió:
Hi, I'm a DVLink user, is there a way to load the aforementioned software on a VPS?
 
Thanks and congratulations for the work done for the DVSwitch and DVLink!


Re: DVLink on VPS

EA5GVK Joaquin
 

Yes, we are working on it. In the next version it will be possible on any platform.
Greetings.

El jue, 3 dic 2020 a las 1:17, <Iz8thd@...> escribió:
Hi, I'm a DVLink user, is there a way to load the aforementioned software on a VPS?
 
Thanks and congratulations for the work done for the DVSwitch and DVLink!


Re: error no node connection

Steve N4IRS
 

Follow the document.

On 12/2/20 9:29 PM, Jed Barton wrote:
Haha, any ideas of what we should do? I know it's connecting, but it
just speaks node number 1998, then disconnects.

On 12/2/20, Steve N4IRS <szingman@msgstor.com> wrote:
I have seen this way too often. HAMVOIP is stupid. They hard code node
number 1998 rather then using a variable. This forces the user to edit
the stanza rather then a simple variable. For a system that claims to be
smarter then ASL, not so much.

In my not so humble opinion.

Steve N4IRS

On 12/2/20 9:20 PM, Jed Barton wrote:
roger that. stand by. we'll take a look. just wasn't sure if it was
something in the node itself.

On 12/2/20, Steve N4IRS <szingman@msgstor.com> wrote:
I assume it HAMVOIP. This is from them
<https://hamvoip.org/howto/iaxrpt-config.pdf> Start at page 6.

On 12/2/20 9:02 PM, Jed Barton wrote:
Hey guys,

Trying to help my friend setup his dvswitch client on android to
connect to his allstar node. So when he connects, it just says node
1998. What does he need to do? I forgot?
The voice speaks node number 1998.
Cheers,

Jed














Re: error no node connection

Steve N4IRS
 

Mike and I discussed that. As soon as we do, any problem that crops up on HAMVOIP, it would be DVSwitch fault. ASL 1.01 uses a more sane IAX / extensions.

Steve

On 12/2/20 9:30 PM, Mike KB8JNM wrote:
Not trying to pile on,

It would help to use a pre built form asking OS & ver and ASL/hamvoip and pi/pc/vps

I am sure we have all lost a lot of time helping down a road to nowhere from not having that info.

On 12/2/2020 9:25 PM, Steve N4IRS wrote:
I have seen this way too often. HAMVOIP is stupid. They hard code node number 1998 rather then using a variable. This forces the user to edit the stanza rather then a simple variable. For a system that claims to be smarter then ASL, not so much.

In my not so humble opinion.

Steve N4IRS

On 12/2/20 9:20 PM, Jed Barton wrote:
roger that.  stand by.  we'll take a look. just wasn't sure if it was
something in the node itself.

On 12/2/20, Steve N4IRS <szingman@msgstor.com> wrote:
I assume it HAMVOIP. This is from them
<https://hamvoip.org/howto/iaxrpt-config.pdf> Start at page 6.

On 12/2/20 9:02 PM, Jed Barton wrote:
Hey guys,

Trying to help my friend setup his dvswitch client on android to
connect to his allstar node.  So when he connects, it just says node
1998.  What does he need to do?  I forgot?
The voice speaks node number 1998.
Cheers,

Jed

















Re: error no node connection

Mike KB8JNM
 

Not trying to pile on,

It would help to use a pre built form asking OS & ver and ASL/hamvoip and pi/pc/vps

I am sure we have all lost a lot of time helping down a road to nowhere from not having that info.

On 12/2/2020 9:25 PM, Steve N4IRS wrote:
I have seen this way too often. HAMVOIP is stupid. They hard code node number 1998 rather then using a variable. This forces the user to edit the stanza rather then a simple variable. For a system that claims to be smarter then ASL, not so much.

In my not so humble opinion.

Steve N4IRS

On 12/2/20 9:20 PM, Jed Barton wrote:
roger that.  stand by.  we'll take a look. just wasn't sure if it was
something in the node itself.

On 12/2/20, Steve N4IRS <szingman@msgstor.com> wrote:
I assume it HAMVOIP. This is from them
<https://hamvoip.org/howto/iaxrpt-config.pdf> Start at page 6.

On 12/2/20 9:02 PM, Jed Barton wrote:
Hey guys,

Trying to help my friend setup his dvswitch client on android to
connect to his allstar node.  So when he connects, it just says node
1998.  What does he need to do?  I forgot?
The voice speaks node number 1998.
Cheers,

Jed














Re: error no node connection

Jed Barton
 

Haha, any ideas of what we should do? I know it's connecting, but it
just speaks node number 1998, then disconnects.

On 12/2/20, Steve N4IRS <szingman@msgstor.com> wrote:
I have seen this way too often. HAMVOIP is stupid. They hard code node
number 1998 rather then using a variable. This forces the user to edit
the stanza rather then a simple variable. For a system that claims to be
smarter then ASL, not so much.

In my not so humble opinion.

Steve N4IRS

On 12/2/20 9:20 PM, Jed Barton wrote:
roger that. stand by. we'll take a look. just wasn't sure if it was
something in the node itself.

On 12/2/20, Steve N4IRS <szingman@msgstor.com> wrote:
I assume it HAMVOIP. This is from them
<https://hamvoip.org/howto/iaxrpt-config.pdf> Start at page 6.

On 12/2/20 9:02 PM, Jed Barton wrote:
Hey guys,

Trying to help my friend setup his dvswitch client on android to
connect to his allstar node. So when he connects, it just says node
1998. What does he need to do? I forgot?
The voice speaks node number 1998.
Cheers,

Jed
















Re: error no node connection

Steve N4IRS
 

I have seen this way too often. HAMVOIP is stupid. They hard code node number 1998 rather then using a variable. This forces the user to edit the stanza rather then a simple variable. For a system that claims to be smarter then ASL, not so much.

In my not so humble opinion.

Steve N4IRS

On 12/2/20 9:20 PM, Jed Barton wrote:
roger that. stand by. we'll take a look. just wasn't sure if it was
something in the node itself.

On 12/2/20, Steve N4IRS <szingman@msgstor.com> wrote:
I assume it HAMVOIP. This is from them
<https://hamvoip.org/howto/iaxrpt-config.pdf> Start at page 6.

On 12/2/20 9:02 PM, Jed Barton wrote:
Hey guys,

Trying to help my friend setup his dvswitch client on android to
connect to his allstar node. So when he connects, it just says node
1998. What does he need to do? I forgot?
The voice speaks node number 1998.
Cheers,

Jed










Re: error no node connection

Jed Barton
 

roger that. stand by. we'll take a look. just wasn't sure if it was
something in the node itself.

On 12/2/20, Steve N4IRS <szingman@msgstor.com> wrote:
I assume it HAMVOIP. This is from them
<https://hamvoip.org/howto/iaxrpt-config.pdf> Start at page 6.

On 12/2/20 9:02 PM, Jed Barton wrote:
Hey guys,

Trying to help my friend setup his dvswitch client on android to
connect to his allstar node. So when he connects, it just says node
1998. What does he need to do? I forgot?
The voice speaks node number 1998.
Cheers,

Jed










Re: error no node connection

Steve N4IRS
 

I assume it HAMVOIP. This is from them <https://hamvoip.org/howto/iaxrpt-config.pdf> Start at page 6.

On 12/2/20 9:02 PM, Jed Barton wrote:
Hey guys,

Trying to help my friend setup his dvswitch client on android to
connect to his allstar node. So when he connects, it just says node
1998. What does he need to do? I forgot?
The voice speaks node number 1998.
Cheers,

Jed




error no node connection

Jed Barton
 

Hey guys,

Trying to help my friend setup his dvswitch client on android to
connect to his allstar node. So when he connects, it just says node
1998. What does he need to do? I forgot?
The voice speaks node number 1998.
Cheers,

Jed


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

Steve N4IRS
 

Yes, you can load DVSwitch Server on a VPS.

Steve N4IRS

On 12/2/20 7:07 PM, Iz8thd@... wrote:
Hi, I'm a DVLink user, is there a way to load the aforementioned software on a VPS?
 
Thanks and congratulations for the work done!


DVLink on VPS

Iz8thd@...
 

Hi, I'm a DVLink user, is there a way to load the aforementioned software on a VPS?
 
Thanks and congratulations for the work done for the DVSwitch and DVLink!


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

Iz8thd@...
 

Hi, I'm a DVLink user, is there a way to load the aforementioned software on a VPS?
 
Thanks and congratulations for the work done!


Re: Dashboard no Workie

Mike KB8JNM
 

I am not familiar with aws virtual boxes so, I can't say a whole bunch about what you are showing me.

But it is something you need to look at.

On 12/2/2020 5:23 PM, Mike KB8JNM wrote:

-A INPUT -p tcp -m tcp --dport 80 -j ACCEPT

On 12/2/2020 5:22 PM, William KC3CPO wrote:

Chain INPUT (policy ACCEPT)

target     prot opt source               destination         

 

Chain FORWARD (policy ACCEPT)

target     prot opt source               destination         

 

Chain OUTPUT (policy ACCEPT)

target     prot opt source               destination         


Re: Dashboard no Workie

Mike KB8JNM
 

-A INPUT -p tcp -m tcp --dport 80 -j ACCEPT

On 12/2/2020 5:22 PM, William KC3CPO wrote:

Chain INPUT (policy ACCEPT)

target     prot opt source               destination         

 

Chain FORWARD (policy ACCEPT)

target     prot opt source               destination         

 

Chain OUTPUT (policy ACCEPT)

target     prot opt source               destination         


Re: Dashboard no Workie

William WY7WL
 

Chain INPUT (policy ACCEPT)

target     prot opt source               destination         

 

Chain FORWARD (policy ACCEPT)

target     prot opt source               destination         

 

Chain OUTPUT (policy ACCEPT)

target     prot opt source               destination         


Re: Dashboard no Workie

Mike KB8JNM
 

What about your /etc/iptables.conf file on the actual install ?

If you are using a external firewall, you should get rid of the internal one. Or make it match.


On 12/2/2020 4:53 PM, William KC3CPO wrote:

I just tried port 85 in the conf file along with changing the AWS security. Still no luck 

2461 - 2480 of 10078