Date   

Re: DVSwitch Dashboard Web Port

EA4GAX - Sergio
 

Ok, excelent.
Thank yor


Re: DVSwitch Dashboard Web Port

Steve N4IRS
 

Sergio,
The port number can be changed.

edit /lib/systemd/system/webproxy.service
See this line:
ExecStart=/usr/bin/node /opt/Web_Proxy/proxy.js 8080 2222

edit to taste and reboot.

73, Steve N4IRS

On 12/20/20 6:38 AM, EA4GAX - Sergio wrote:
Hi Steve and all, Is possible change port 8080? This port is to use for the other machine.
Thank you.


Re: DVSwitch Dashboard Web Port

EA4GAX - Sergio
 

Hi Steve and all, Is possible change port 8080? This port is to use for the other machine.
Thank you.


Re: ASL <-> D-Star <-> xlxd

 

On 20/12/20 4:23 am, Steve N4IRS wrote:

[Edited Message Follows]

So,
I was playing around this morning. I'll preface this as I can't even
spell xlxd.
I find xlxd listens on a number of UDP ports, some of which conflict
with ircDDBGateway.
This is a systemctl status after starting xlxd on a DVSwitch Server
Yes, that's correct, because both ircDDBGateway and xlxd are able to
listen for incoming traffic on the same protocols.  You need to bind
them to separate IPs, or run them on separate servers.  I now do the
latter, where I run xlxd alongside AllStar, YSFReflector and
P25Reflector on one server, while DVSwitch itself runs on another
server.  I was able to have all of the reflectors, except for xlxd on
the same server (using different ports for YSFReflector and xlxd's YSF
support), plus AllStar on the one server, but separated out DVSwitch
when the new version came out for ease of maintenance, and not wanting
to conflict with old code.

And yes, 127.0.0.1 would be for ambed, which I'm not running here, as my
xlxd currently does no transcoding. 

--
73 de Tony VK3JED/VK3IRL
http://vkradio.com


Re: ASL <-> D-Star <-> xlxd

 

On 20/12/20 1:56 pm, Steve N4IRS wrote:
As I found, without 127.0.0.1 xlxd is not listening on any UDP ports.
I did not think xlxd HAD to be used with a vocoder if all it was to do
is be a D-Star reflector.
Not high on my list of things to care about, I was just playing and or
bringing up a test D-Star or DMR or YSF reflector.
You are correct, xlxd doesn't need the AMBE chip or server, unless you
actually want to transcode.  I'm running an xlxd reflector without the
AMBE transcoder.  I am using primarily two modules.  One is for D-STAR
on my multimode gateway (XLX432 D) and another is a YSF reflector.  
Other than the YSF channel, the rest are available for D-STAR use.

--
73 de Tony VK3JED/VK3IRL
http://vkradio.com


Re: ASL <-> D-Star <-> xlxd

Steve N4IRS
 

As I found, without 127.0.0.1 xlxd is not listening on any UDP ports. I did not think xlxd HAD to be used with a vocoder if all it was to do is be a D-Star reflector.
Not high on my list of things to care about, I was just playing and or bringing up a test D-Star or DMR or YSF reflector.

Steve

On 12/19/20 9:52 PM, Charles Wiant via groups.io wrote:

If I am not mistaken the 127.0.0.1 is supposed to be ambed.

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Steve N4IRS
Sent: Saturday, December 19, 2020 11:23 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] ASL <-> D-Star <-> xlxd

 

[Edited Message Follows]

So,
I was playing around this morning. I'll preface this as I can't even spell xlxd.
I find xlxd listens on a number of UDP ports, some of which conflict with ircDDBGateway.
This is a systemctl status after starting xlxd on a DVSwitch Server


Dec 19 12:07:27 new xlxd[1337]: Read 162240 DMR ids from xlxapi.rlx.lu database

Dec 19 12:07:28 new xlxd[1337]: Read 6004 YSF nodes from xlxapi.rlx.lu database

Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP30001 on ip 44.103.34.85

Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP30051 on ip 44.103.34.85

Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP42000 on ip 44.103.34.85

Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP40000 on ip 44.103.34.85

Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP12346 on ip 44.103.34.85

Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP12345 on ip 44.103.34.85

Dec 19 12:07:28 new xlxd[1337]: Error opening raw socket for ICMP

Dec 19 12:07:28 new xlxd[1337]: Error starting reflector

 
It seems the default startup for xlxd is: xlxd XLX999 192.168.178.212 127.0.0.1
Question, what is xlxd listening to 127.0.0.1 for?
If I start xlxd without the 127.0.0.1 address, the daemon starts with no error.

AH! if I start xlxd without 127.0.0.1 it starts, but is not listening to any UDP ports...

Comments?



Re: ASL <-> D-Star <-> xlxd

Charles Wiant
 

If I am not mistaken the 127.0.0.1 is supposed to be ambed.

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of Steve N4IRS
Sent: Saturday, December 19, 2020 11:23 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] ASL <-> D-Star <-> xlxd

 

[Edited Message Follows]

So,
I was playing around this morning. I'll preface this as I can't even spell xlxd.
I find xlxd listens on a number of UDP ports, some of which conflict with ircDDBGateway.
This is a systemctl status after starting xlxd on a DVSwitch Server


Dec 19 12:07:27 new xlxd[1337]: Read 162240 DMR ids from xlxapi.rlx.lu database

Dec 19 12:07:28 new xlxd[1337]: Read 6004 YSF nodes from xlxapi.rlx.lu database

Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP30001 on ip 44.103.34.85

Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP30051 on ip 44.103.34.85

Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP42000 on ip 44.103.34.85

Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP40000 on ip 44.103.34.85

Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP12346 on ip 44.103.34.85

Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP12345 on ip 44.103.34.85

Dec 19 12:07:28 new xlxd[1337]: Error opening raw socket for ICMP

Dec 19 12:07:28 new xlxd[1337]: Error starting reflector

 
It seems the default startup for xlxd is: xlxd XLX999 192.168.178.212 127.0.0.1
Question, what is xlxd listening to 127.0.0.1 for?
If I start xlxd without the 127.0.0.1 address, the daemon starts with no error.

AH! if I start xlxd without 127.0.0.1 it starts, but is not listening to any UDP ports...

Comments?


Re: ASL <-> D-Star <-> xlxd

Doug - W4DBG
 

I believe it is looking for AMBE transcoding. 

I am no expert though. 

Just trying to help :)




On Sat, Dec 19, 2020 at 11:25 AM Steve N4IRS <szingman@...> wrote:

[Edited Message Follows]

So,
I was playing around this morning. I'll preface this as I can't even spell xlxd.
I find xlxd listens on a number of UDP ports, some of which conflict with ircDDBGateway.
This is a systemctl status after starting xlxd on a DVSwitch Server

Dec 19 12:07:27 new xlxd[1337]: Read 162240 DMR ids from xlxapi.rlx.lu database
Dec 19 12:07:28 new xlxd[1337]: Read 6004 YSF nodes from xlxapi.rlx.lu database
Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP30001 on ip 44.103.34.85
Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP30051 on ip 44.103.34.85
Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP42000 on ip 44.103.34.85
Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP40000 on ip 44.103.34.85
Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP12346 on ip 44.103.34.85
Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP12345 on ip 44.103.34.85
Dec 19 12:07:28 new xlxd[1337]: Error opening raw socket for ICMP
Dec 19 12:07:28 new xlxd[1337]: Error starting reflector
 
It seems the default startup for xlxd is: xlxd XLX999 192.168.178.212 127.0.0.1
Question, what is xlxd listening to 127.0.0.1 for?
If I start xlxd without the 127.0.0.1 address, the daemon starts with no error.

AH! if I start xlxd without 127.0.0.1 it starts, but is not listening to any UDP ports...

Comments?

--
Doug Gooden
troytrojan@...


Re: ASL <-> D-Star <-> xlxd

Steve N4IRS
 
Edited

So,
I was playing around this morning. I'll preface this as I can't even spell xlxd.
I find xlxd listens on a number of UDP ports, some of which conflict with ircDDBGateway.
This is a systemctl status after starting xlxd on a DVSwitch Server

Dec 19 12:07:27 new xlxd[1337]: Read 162240 DMR ids from xlxapi.rlx.lu database
Dec 19 12:07:28 new xlxd[1337]: Read 6004 YSF nodes from xlxapi.rlx.lu database
Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP30001 on ip 44.103.34.85
Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP30051 on ip 44.103.34.85
Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP42000 on ip 44.103.34.85
Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP40000 on ip 44.103.34.85
Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP12346 on ip 44.103.34.85
Dec 19 12:07:28 new xlxd[1337]: Error opening socket on port UDP12345 on ip 44.103.34.85
Dec 19 12:07:28 new xlxd[1337]: Error opening raw socket for ICMP
Dec 19 12:07:28 new xlxd[1337]: Error starting reflector
 
It seems the default startup for xlxd is: xlxd XLX999 192.168.178.212 127.0.0.1
Question, what is xlxd listening to 127.0.0.1 for?
If I start xlxd without the 127.0.0.1 address, the daemon starts with no error.

AH! if I start xlxd without 127.0.0.1 it starts, but is not listening to any UDP ports...

Comments?


Re: ASL <-> D-Star <-> xlxd

Steve N4IRS
 

Ircddbgateway is installed by the image or by the system builder script.

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Ken KE2N via groups.io <ke2n@...>
Sent: Friday, December 18, 2020 11:23:13 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] ASL <-> D-Star <-> xlxd
 
NXDN, P25 and YSF gateways are included with DVSM.  But ircddbgateway is not..
Where should I pull ircddbgateway from (to be assured it will work with MMDVM_Bridge)?

Is it this one?     

https://github.com/g4klx/ircddbgateway



Tnx
Ken
KE2N


Re: Adding P25 to existing YSF and DMR bridge

Steve N4IRS
 

Complete bridge end to end. From what you told me, if only one bridge is running it works fine (either one) I want you to capture the UDP data for tach bridge running on its own.

On 12/18/2020 3:35 PM, Gary, KE8O wrote:
Ken

For clarification. When you say bridge are you referring to the MB instances only, or the complete bridge end to end..... i.e MB only for my YSF to DMR, then stop that MB, and for the P25 to DMR start its MB and both AB's ?

Thanks


Re: Dmr Utils

Don Poaps
 

root@dvswitch-server:/opt/dmr_utils3# ls
dmr_utils3  install.sh  LICENSE  README.rst  setup.py
root@dvswitch-server:/opt/dmr_utils3# cd dmr_utils3
root@dvswitch-server:/opt/dmr_utils3/dmr_utils3# ls
ambe.py        const.py   encode.py        hamming.py   rs129.py
ambe_utils.py  crc.py     golay.py         __init__.py  utils.py
bptc.py        decode.py  golay_tables.py  qr.py
root@dvswitch-server:/opt/dmr_utils3/dmr_utils3#

Something I did setup. I don't see HBlink3 directory.

Lost and still looking

73

Don va7dgp/va7qu


Re: Adding P25 to existing YSF and DMR bridge

Gary, KE8O
 

Sorry meant to say Steve, was talking to K2KXK Ken when I was typing.


Re: Adding P25 to existing YSF and DMR bridge

Gary, KE8O
 

Ken

For clarification. When you say bridge are you referring to the MB instances only, or the complete bridge end to end..... i.e MB only for my YSF to DMR, then stop that MB, and for the P25 to DMR start its MB and both AB's ?

Thanks


Re: Adding P25 to existing YSF and DMR bridge

Steve N4IRS
 

Gary,
That is not what I suggested yo do. This is.

With only one of your bridges running, run
/opt/MMDVM_Bridge/dvswitch.sh getUDPPortsForProcess ALL

The stop that bridge and start the other bridge
/opt/MMDVM_Bridge/dvswitch.sh getUDPPortsForProcess ALL

compare the 2 outputs.

On 12/18/2020 2:57 PM, Gary, KE8O wrote:
Steve, 

I ran dvswitch.sh getUDPPortsForProcess ALL with all instances of MB and AB stopped. With all instances stopped the only ports showing in use where those associated with P25Gateway 6074, 42010, 42020. The other ports not displayed used are 41000 - P25 reflector, and 42002 - YSF reflector. I did not find any conflicts. I attached the output for review. 


 


Re: Adding P25 to existing YSF and DMR bridge

Gary, KE8O
 

Now the files are attached. 


Re: Adding P25 to existing YSF and DMR bridge

Gary, KE8O
 

Steve, 

I ran dvswitch.sh getUDPPortsForProcess ALL with all instances of MB and AB stopped. With all instances stopped the only ports showing in use where those associated with P25Gateway 6074, 42010, 42020. The other ports not displayed used are 41000 - P25 reflector, and 42002 - YSF reflector. I did not find any conflicts. I attached the output for review. 


 


Re: Current Best-Practices for Linking with Brandmeister

J M
 

I'm not sure I understand your comment about the channels then. I should only need two channels to transcode between D-STAR and DMR within xlxd via ambed. Isn't the point of MMDVMBrdige/DVSwitch to translate between DMR and YSF by changing the data stream but not needing to be transcoded becuase YSF and DMR is the same AMBE version?


Re: Dmr Utils

Steve N4IRS
 

Things have changed since 2017.
I suggest you ask here <https://dvswitch.groups.io/g/HBlink>

Steve N4IRS

On 12/18/2020 1:02 PM, Don Poaps wrote:
On Sat, Jun 24, 2017 at 03:56 PM, Steve N4IRS wrote:
cd dmr_utils/
It is creating the folder dmr/utils/ directory I did ls and I hope this screencap shows the error. I'm running this on my dvswitch pi.

later

73

Don va7dgp






Re: Dmr Utils

Don Poaps
 

On Sat, Jun 24, 2017 at 03:56 PM, Steve N4IRS wrote:
cd dmr_utils/
It is creating the folder dmr/utils/ directory I did ls and I hope this screencap shows the error. I'm running this on my dvswitch pi.

later

73

Don va7dgp




2041 - 2060 of 9931