Date   

Re: DVMEGA

Steve N4IRS
 

nothing in the e-mail

On 1/2/21 7:22 AM, N4UPC - Scott via groups.io wrote:


73,
Scott
N4UPC


‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 6:17 AM, Steve N4IRS <szingman@...> wrote:
systemctl status webproxy

On 1/2/21 7:16 AM, N4UPC - Scott via groups.io wrote:
Fixed DV3000 section and restarted services.

No proxy.log

73,
Scott
N4UPC



On Sat, Jan 2, 2021 at 06:10, Steve N4IRS <szingman@...> wrote:
OK,
Not that this matters for your issue. Since you are using the stick:
[DV3000]
; address = 127.0.0.1
; rxPort = 2460  
address = /dev/ttyUSB0    
baud = 460800      
serial = true

set your DV3000 section like above.

For your red button RX monitor, take a look at /var/log/dvswitch/proxy.log

On 1/2/21 7:02 AM, N4UPC - Scott via groups.io wrote:
The only thing that is not standard is that I'm using a DVMEGA stick.  Here is the section that pertains to:

[DV3000]
address = 127.0.0.1 
rxPort = 2460   
address = /dev/ttyUSB0     
baud = 460800       
serial = true

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:52 AM, Steve N4IRS <szingman@...> wrote:
green to red not good. Red bad.

On 1/2/21 6:51 AM, N4UPC - Scott via groups.io wrote:
I saw you transmitting that time, but no audio.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:32 AM, Steve N4IRS <szingman@...> wrote:
standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:
I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!















Re: DVMEGA

N4UPC - Scott
 



73,
Scott
N4UPC


‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Saturday, January 2nd, 2021 at 6:17 AM, Steve N4IRS <szingman@...> wrote:
systemctl status webproxy

On 1/2/21 7:16 AM, N4UPC - Scott via groups.io wrote:
Fixed DV3000 section and restarted services.

No proxy.log

73,
Scott
N4UPC



On Sat, Jan 2, 2021 at 06:10, Steve N4IRS <szingman@...> wrote:
OK,
Not that this matters for your issue. Since you are using the stick:
[DV3000]
; address = 127.0.0.1
; rxPort = 2460  
address = /dev/ttyUSB0    
baud = 460800      
serial = true

set your DV3000 section like above.

For your red button RX monitor, take a look at /var/log/dvswitch/proxy.log

On 1/2/21 7:02 AM, N4UPC - Scott via groups.io wrote:
The only thing that is not standard is that I'm using a DVMEGA stick.  Here is the section that pertains to:

[DV3000]
address = 127.0.0.1 
rxPort = 2460   
address = /dev/ttyUSB0     
baud = 460800       
serial = true

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:52 AM, Steve N4IRS <szingman@...> wrote:
green to red not good. Red bad.

On 1/2/21 6:51 AM, N4UPC - Scott via groups.io wrote:
I saw you transmitting that time, but no audio.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:32 AM, Steve N4IRS <szingman@...> wrote:
standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:
I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!














Re: DVMEGA

Steve N4IRS
 

systemctl status webproxy

On 1/2/21 7:16 AM, N4UPC - Scott via groups.io wrote:
Fixed DV3000 section and restarted services.

No proxy.log

73,
Scott
N4UPC



On Sat, Jan 2, 2021 at 06:10, Steve N4IRS <szingman@...> wrote:
OK,
Not that this matters for your issue. Since you are using the stick:
[DV3000]
; address = 127.0.0.1
; rxPort = 2460  
address = /dev/ttyUSB0    
baud = 460800      
serial = true

set your DV3000 section like above.

For your red button RX monitor, take a look at /var/log/dvswitch/proxy.log

On 1/2/21 7:02 AM, N4UPC - Scott via groups.io wrote:
The only thing that is not standard is that I'm using a DVMEGA stick.  Here is the section that pertains to:

[DV3000]
address = 127.0.0.1 
rxPort = 2460   
address = /dev/ttyUSB0     
baud = 460800       
serial = true

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:52 AM, Steve N4IRS <szingman@...> wrote:
green to red not good. Red bad.

On 1/2/21 6:51 AM, N4UPC - Scott via groups.io wrote:
I saw you transmitting that time, but no audio.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:32 AM, Steve N4IRS <szingman@...> wrote:
standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:
I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!













Re: DVMEGA

N4UPC - Scott
 

Fixed DV3000 section and restarted services.

No proxy.log

73,
Scott
N4UPC



On Sat, Jan 2, 2021 at 06:10, Steve N4IRS <szingman@...> wrote:
OK,
Not that this matters for your issue. Since you are using the stick:
[DV3000]
; address = 127.0.0.1
; rxPort = 2460  
address = /dev/ttyUSB0    
baud = 460800      
serial = true

set your DV3000 section like above.

For your red button RX monitor, take a look at /var/log/dvswitch/proxy.log

On 1/2/21 7:02 AM, N4UPC - Scott via groups.io wrote:
The only thing that is not standard is that I'm using a DVMEGA stick.  Here is the section that pertains to:

[DV3000]
address = 127.0.0.1 
rxPort = 2460   
address = /dev/ttyUSB0     
baud = 460800       
serial = true

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:52 AM, Steve N4IRS <szingman@...> wrote:
green to red not good. Red bad.

On 1/2/21 6:51 AM, N4UPC - Scott via groups.io wrote:
I saw you transmitting that time, but no audio.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:32 AM, Steve N4IRS <szingman@...> wrote:
standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:
I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!












Re: DVMEGA

Steve N4IRS
 

OK,
Not that this matters for your issue. Since you are using the stick:
[DV3000]
; address = 127.0.0.1
; rxPort = 2460  
address = /dev/ttyUSB0    
baud = 460800      
serial = true

set your DV3000 section like above.

For your red button RX monitor, take a look at /var/log/dvswitch/proxy.log

On 1/2/21 7:02 AM, N4UPC - Scott via groups.io wrote:
The only thing that is not standard is that I'm using a DVMEGA stick.  Here is the section that pertains to:

[DV3000]
address = 127.0.0.1 
rxPort = 2460   
address = /dev/ttyUSB0     
baud = 460800       
serial = true

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:52 AM, Steve N4IRS <szingman@...> wrote:
green to red not good. Red bad.

On 1/2/21 6:51 AM, N4UPC - Scott via groups.io wrote:
I saw you transmitting that time, but no audio.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:32 AM, Steve N4IRS <szingman@...> wrote:
standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:
I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!










Re: DVMEGA

N4UPC - Scott
 

The only thing that is not standard is that I'm using a DVMEGA stick.  Here is the section that pertains to:

[DV3000]
address = 127.0.0.1 
rxPort = 2460   
address = /dev/ttyUSB0     
baud = 460800       
serial = true

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Saturday, January 2nd, 2021 at 5:52 AM, Steve N4IRS <szingman@...> wrote:
green to red not good. Red bad.

On 1/2/21 6:51 AM, N4UPC - Scott via groups.io wrote:
I saw you transmitting that time, but no audio.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:32 AM, Steve N4IRS <szingman@...> wrote:
standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:
I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!









Re: DVMEGA

N4UPC - Scott
 

Okay, so what should I check with regard to the green/red thing?

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Saturday, January 2nd, 2021 at 5:52 AM, Steve N4IRS <szingman@...> wrote:
green to red not good. Red bad.

On 1/2/21 6:51 AM, N4UPC - Scott via groups.io wrote:
I saw you transmitting that time, but no audio.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:32 AM, Steve N4IRS <szingman@...> wrote:
standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:
I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!









Re: DVMEGA

Steve N4IRS
 

green to red not good. Red bad.

On 1/2/21 6:51 AM, N4UPC - Scott via groups.io wrote:
I saw you transmitting that time, but no audio.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:32 AM, Steve N4IRS <szingman@...> wrote:
standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:
I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!








Re: DVMEGA

N4UPC - Scott
 

I saw you transmitting that time, but no audio.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Saturday, January 2nd, 2021 at 5:32 AM, Steve N4IRS <szingman@...> wrote:
standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:
I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!







Re: DVMEGA

Steve N4IRS
 

standby

On 1/2/21 6:28 AM, N4UPC - Scott via groups.io wrote:
I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!






Re: DVMEGA

Steve N4IRS
 

I'll be there in a few.


On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!




Re: DVMEGA

N4UPC - Scott
 

I can see you on the dashboard.  The RX light keeps going from green to red. I'm not hearing anything.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Saturday, January 2nd, 2021 at 5:22 AM, Steve N4IRS <szingman@...> wrote:
I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!





Re: DVMEGA

Steve N4IRS
 

I'm calling you.

On 1/2/21 6:15 AM, N4UPC - Scott via groups.io wrote:
Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!




Re: DVMEGA

N4UPC - Scott
 

Yes, I'm using my DMR ID as a talkgroup.

73,
Scott
N4UPC



‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Saturday, January 2nd, 2021 at 4:59 AM, Steve N4IRS <szingman@...> wrote:
TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!



Re: DVMEGA

Steve N4IRS
 

TG 3162356?

On 1/2/21 5:26 AM, N4UPC - Scott via groups.io wrote:
You were correct Steve. Can some see if they can connect to me (3162356). Thanks!


Re: DVMEGA

N4UPC - Scott
 

You were correct Steve. Can some see if they can connect to me (3162356). Thanks!


Re: Where the heck is hUC?

 

On 2/1/21 4:38 am, Steve N4IRS wrote:
Happy new year to all!
Just a quick update, The HTML Client (hUC) and the Analog_Reflector
have gone into beta test as of today. The beta team will now start
trying to break it and comment on features etc. I do not have a time
frame as to when this goes to full release. We will need to package it
for installation and document how to install, manage and use.
Great news Steve.  I can't wait for Analog_Reflector. :)

--
73 de Tony VK3JED/VK3IRL
http://vkradio.com


Re: DVMEGA

Mike KB8JNM
 

I thing the beginning of the file is missing a  "  <?php     "

On 1/1/2021 10:49 PM, N4UPC - Scott via groups.io wrote:
I'm getting this from the dashboard and can't figure out what I'm missing. PHP is installed.

DVSwitch Dashboard

     RX Monitor   ';} ?>
'; echo ''; echo ' '."\n"; echo ''."\n"; echo ''; echo '
'."\n"; echo ''."\n"; echo '
'."\n"; include 'include/lh.php'; echo '
'."\n"; echo "
\n"; echo '
'."\n"; include 'include/localtx.php'; echo '
'."\n"; echo ''; ?> '."\n"; echo ''."\n"; echo '
'."\n"; include 'include/system.php'; // Basic System Info echo '
'."\n"; echo '
'."\n"; ?> DVSwitch Dashboard "2020") {$cdate="2020-".date("Y");} echo $cdate; ?>
Dashboard based on Pi-Star Dashboard, © Andy Taylor (MW0MWZ) and adapted to DVSwitch by SP2ONG


Re: DVMEGA

Steve N4IRS
 

Usually, that is because you have MMDVM_Bridge also running in the background.
systemctl stop mmdvm_bridge

On 1/1/21 6:16 PM, N4UPC - Scott via groups.io wrote:
I'm missing something ... I just have no idea what! Grrrrrr!  From the MMDVM_Bridge what running in foreground:

E: 2021-01-01 23:13:25.685 Cannot bind the UDP address, err: 98
F: 2021-01-01 23:13:25.685 DMR, Can not open listener port 31103


Re: Interface Icom D-Star repeater to DVSwitch?

lloyd Duck
 

It’s was changed awhile back to work correctly the RP2C when selected as the modem. Even does a virtual Nic to allow the pi-star to talk to the RP2C when both are plugged into the same LAN network “switch or router”. It’s very user friendly to setup now thanks to Andrew. All settings are done from the configuration page. 


Lloyd Duck, W5LND



On Jan 1, 2021, at 9:27 AM, Steve N4IRS <szingman@...> wrote:

 Unless Pi-Star ha modified ircDDBGateway, the version of ircDDBGateway should be the same. Of course, you will have to edit the ircDDBGateway config by hand. /etc/ircddbgateway

On 1/1/21 10:23 AM, Ken KE2N via groups.io wrote:
With Pi Star, you can specify repeater type 1 in the gateway configure and it will talk to an ID RP2C repeater controller and any attached ICOM DSTAR repeater(s).   I run that here on 2 meters. 

So if DVS has the same gateway software as Pi Star (?) it might work. So the question is: Does the DVS DSTAR Gateway support repeater type 1 (meaning the RP2C interface)?

This is of interest to me since (maybe) I could replace my Pi Star gateway with DVS and its DSTAR Gateway and then have bridging options in the same box.

Ken

1701 - 1720 of 9795