Date   

What Ports need to be forwarded?

Frank C. D'Amato - KB2MXV
 

I currently have the IP address of my DVswitch set to the DMZ in my router, and I would like to just forward the individual ports that I need forwarded for it to work.

Im using DVswitch to link analog to digital DMR.

I'm only seeing ports 31100, 31103 being used in my MMDVM_Bridge log file.

what other log files should I look at to see what ports I'm using.?

I: 2021-01-04 01:46:05.965 =
I: 2021-01-04 02:17:56.977 This software is for use on amateur radio networks only,
I: 2021-01-04 02:17:56.977 it is to be used for educational purposes only. Its use on
I: 2021-01-04 02:17:56.977 commercial networks is strictly prohibited.
I: 2021-01-04 02:17:56.977 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2021-01-04 02:17:56.977 MMDVM_Bridge-20201129_V1.6.2 is starting
M: 2021-01-04 02:17:56.977 Built 16:43:40 Nov 29 2020 (GitID #89f8998)
I: 2021-01-04 02:17:56.977 General Parameters
I: 2021-01-04 02:17:56.977     Callsign: W3TWA
I: 2021-01-04 02:17:56.977     Id: 317446611
I: 2021-01-04 02:17:56.977     Duplex: no
I: 2021-01-04 02:17:56.977     Timeout: 600s
I: 2021-01-04 02:17:56.977     D-Star: disabled
I: 2021-01-04 02:17:56.978     DMR: enabled
I: 2021-01-04 02:17:56.978     YSF: disabled
I: 2021-01-04 02:17:56.978     P25: disabled
I: 2021-01-04 02:17:56.978     NXDN: disabled
I: 2021-01-04 02:17:56.978 Modem Parameters
I: 2021-01-04 02:17:56.978     Port: /dev/null
I: 2021-01-04 02:17:56.978     RX Invert: no
I: 2021-01-04 02:17:56.978     TX Invert: no
I: 2021-01-04 02:17:56.978     PTT Invert: no
I: 2021-01-04 02:17:56.978     TX Delay: 100ms
I: 2021-01-04 02:17:56.978     RX Offset: 0Hz
I: 2021-01-04 02:17:56.978     TX Offset: 0Hz
I: 2021-01-04 02:17:56.978     RX DC Offset: 0
I: 2021-01-04 02:17:56.978     TX DC Offset: 0
I: 2021-01-04 02:17:56.978     RF Level: 100.0%
I: 2021-01-04 02:17:56.978     DMR Delay: 0 (0.0ms)
I: 2021-01-04 02:17:56.978     RX Level: 50.0%
I: 2021-01-04 02:17:56.978     CW Id TX Level: 50.0%
I: 2021-01-04 02:17:56.978     D-Star TX Level: 50.0%
I: 2021-01-04 02:17:56.978     DMR TX Level: 50.0%
I: 2021-01-04 02:17:56.978     YSF TX Level: 50.0%
I: 2021-01-04 02:17:56.978     P25 TX Level: 50.0%
I: 2021-01-04 02:17:56.978     NXDN TX Level: 50.0%
I: 2021-01-04 02:17:56.978     RX Frequency: 444775000Hz (444775000Hz)
I: 2021-01-04 02:17:56.978     TX Frequency: 449775000Hz (449775000Hz)
M: 2021-01-04 02:17:56.978 Opening the MMDVM
I: 2021-01-04 02:17:56.978 Display Parameters
I: 2021-01-04 02:17:56.978     Type: 
I: 2021-01-04 02:17:56.979 DMR Network Parameters
I: 2021-01-04 02:17:56.979     Address: 3102.repeater.net
I: 2021-01-04 02:17:56.979     Port: 62031
I: 2021-01-04 02:17:56.979     Local: 62032
I: 2021-01-04 02:17:56.979     Jitter: 360ms
I: 2021-01-04 02:17:56.979     Slot 1: disabled
I: 2021-01-04 02:17:56.979     Slot 2: enabled
I: 2021-01-04 02:17:56.979     Mode Hang: 3s
I: 2021-01-04 02:17:57.019 Info Parameters
I: 2021-01-04 02:17:57.019     Callsign: W3TWA
I: 2021-01-04 02:17:57.019     RX Frequency: 444775000Hz
I: 2021-01-04 02:17:57.019     TX Frequency: 449775000Hz
I: 2021-01-04 02:17:57.019     Power: 0W
I: 2021-01-04 02:17:57.019     Latitude: 40.789738deg N
I: 2021-01-04 02:17:57.020     Longitude: -76.121414deg E
I: 2021-01-04 02:17:57.020     Height: 0m
I: 2021-01-04 02:17:57.020     Location: "Tamaqua, PA"
I: 2021-01-04 02:17:57.020     Description: "W3TWA DMR"
I: 2021-01-04 02:17:57.020     URL: "http://qrz.com/db/w3twa"
M: 2021-01-04 02:17:57.020 DMR, Opening DMR Network
I: 2021-01-04 02:17:57.020 RSSI
I: 2021-01-04 02:17:57.020     Mapping File: /dev/null
I: 2021-01-04 02:17:57.020 Loaded 0 RSSI data mapping points from /dev/null
I: 2021-01-04 02:17:57.020 DMR Id Lookups
I: 2021-01-04 02:17:57.021     File: /var/lib/mmdvm/DMRIds.dat
I: 2021-01-04 02:17:57.021     Reload: 24 hours
I: 2021-01-04 02:17:57.932 Loaded 182480 Ids to the DMR callsign lookup table
I: 2021-01-04 02:17:57.933 DMR RF Parameters
I: 2021-01-04 02:17:57.933     Id: 317446611
I: 2021-01-04 02:17:57.933     Color Code: 1
I: 2021-01-04 02:17:57.933     Self Only: no
I: 2021-01-04 02:17:57.933     Embedded LC Only: yes
I: 2021-01-04 02:17:57.933     Dump Talker Alias Data: no
I: 2021-01-04 02:17:57.933     Prefixes: 0
I: 2021-01-04 02:17:57.933     Call Hang: 3s
I: 2021-01-04 02:17:57.933     TX Hang: 3s
I: 2021-01-04 02:17:57.933     Mode Hang: 10s
M: 2021-01-04 02:17:57.933 DMR, Opening INI file: DVSwitch.ini
I: 2021-01-04 02:17:57.933 Started the DMR Id lookup reload thread
M: 2021-01-04 02:17:57.951 DMR, Setting [DMR] address -> 127.0.0.1
M: 2021-01-04 02:17:57.951 DMR, Setting [DMR] txPort -> 31100
M: 2021-01-04 02:17:57.951 DMR, Setting [DMR] rxPort -> 31103
M: 2021-01-04 02:17:57.951 DMR, Setting [DMR] slot -> 2
M: 2021-01-04 02:17:57.951 DMR, Setting [DMR] exportTG -> 0
M: 2021-01-04 02:17:57.951 DMR, Setting [DMR] hangTimerInFrames -> 0
M: 2021-01-04 02:17:57.951 DMR, Setting [DMR] talkerAlias -> %callsign %location %description
M: 2021-01-04 02:17:57.952 DMR, Transmitting on 127.0.0.1:31100, and listening on port 31103.  Result = 1
M: 2021-01-04 02:17:57.952 MMDVM_Bridge-20201129_V1.6.2 is running
M: 2021-01-04 02:18:08.170 DMR, Logged into the master successfully: 3102.repeater.net:62031
M: 2021-01-04 02:22:04.463 DMR Slot 2, received network voice header from KC3PJJ to TG 314267
M: 2021-01-04 02:22:04.578 DMR, TX state = ON
I: 2021-01-04 02:22:04.579 DMR, Begin TX: src=3174466 rpt=317446611 dst=314267 slot=2 cc=1 metadata=W3TWA
M: 2021-01-04 02:22:04.996 DMR Talker Alias (Data Format 2, Received 6/12 char): 'KC3PJJ'
M: 2021-01-04 02:22:05.717 DMR Talker Alias (Data Format 2, Received 12/12 char): 'KC3PJJ Mason'
M: 2021-01-04 02:22:07.133 DMR, TX state = OFF, DMR frame count was 44 frames
M: 2021-01-04 02:22:09.432 DMR Slot 2, received network end of voice transmission, 5.2 seconds, 0% packet loss, BER: 0.0%
M: 2021-01-04 02:22:11.885 DMR, TX state = ON
I: 2021-01-04 02:22:11.886 DMR, Begin TX: src=3174466 rpt=317446611 dst=314267 slot=2 cc=1 metadata=W3TWA
M: 2021-01-04 02:22:14.208 DMR, TX state = OFF, DMR frame count was 60 frames
M: 2021-01-04 02:29:59.971 DMR, TX state = ON
I: 2021-01-04 02:29:59.971 DMR, Begin TX: src=3174466 rpt=317446611 dst=314267 slot=2 cc=1 metadata=W3TWA
M: 2021-01-04 02:30:13.403 DMR, TX state = OFF, DMR frame count was 226 frames
M: 2021-01-04 02:32:43.903 DMR Slot 2, received network voice header from KB2MXV to TG 314267
M: 2021-01-04 02:32:44.011 DMR, TX state = ON
I: 2021-01-04 02:32:44.011 DMR, Begin TX: src=3174466 rpt=317446611 dst=314267 slot=2 cc=1 metadata=W3TWA
M: 2021-01-04 02:32:44.568 DMR Talker Alias (Data Format 2, Received 6/23 char): 'KB2MXV'
M: 2021-01-04 02:32:45.286 DMR Talker Alias (Data Format 2, Received 13/23 char): 'KB2MXV Frank '
M: 2021-01-04 02:32:45.991 DMR Talker Alias (Data Format 2, Received 20/23 char): 'KB2MXV Frank DMR ID:'
M: 2021-01-04 02:32:46.521 DMR, TX state = OFF, DMR frame count was 44 frames
M: 2021-01-04 02:32:47.210 DMR Slot 2, received network end of voice transmission, 3.4 seconds, 0% packet loss, BER: 0.0%
M: 2021-01-04 02:32:47.732 DMR, TX state = ON
I: 2021-01-04 02:32:47.732 DMR, Begin TX: src=3174466 rpt=317446611 dst=314267 slot=2 cc=1 metadata=W3TWA
M: 2021-01-04 02:32:52.246 DMR, TX state = OFF, DMR frame count was 77 frames
 


Re: Active DMR TGs

N4UPC - Scott
 

Just my luck! Exactly ONE person making a short transmission on 91 or 93! But at least I heard them!


Re: Active DMR TGs

N4UPC - Scott
 

lol - Good enough! I’m wanting to pound on my new server & ASL node to make sure everything is working and that it is robust. Thanks!


Re: Active DMR TGs

Steve N4IRS
 

91 (World Wide) 93 (North America) and uh....

On 1/3/21 11:55 AM, N4UPC - Scott via groups.io wrote:
What would you say the top three most active DMR talkgroups are, please? Thanks!


Active DMR TGs

N4UPC - Scott
 

What would you say the top three most active DMR talkgroups are, please? Thanks!


Re: Free DMR with DVS

Steve N4IRS
 

Derek,
Please retry again. There may have been a internet problem.

Thanks, Steve

On 1/3/21 4:25 AM, G4WXN@... wrote:
MMDVM log shows login to master has failed.

Here's the stanza from the ini file
 
#--------Free DMR Network------
[DMR Network]
Enable=1
Address=hotspots.freedmr.uk
#HB_GB_FreeDMR_DMO
Port=62031
Jitter=360
Local=62032
Password=passw0rd
#Options=
Slot1=0
Slot2=1
Debug=0
#-------------------------
--
Derek

G4WXN


Re: Free DMR with DVS

Steve N4IRS
 

Derek,
I just checked this with Pi-Star. I am unable to login. Since Pi-Star can't login, MMDVM_Bridge will not be able to login.

Steve N4IRS

On 1/3/21 4:25 AM, G4WXN@... wrote:
MMDVM log shows login to master has failed.

Here's the stanza from the ini file
 
#--------Free DMR Network------
[DMR Network]
Enable=1
Address=hotspots.freedmr.uk
#HB_GB_FreeDMR_DMO
Port=62031
Jitter=360
Local=62032
Password=passw0rd
#Options=
Slot1=0
Slot2=1
Debug=0
#-------------------------
--
Derek

G4WXN


Re: Free DMR with DVS

Steve N4IRS
 

Post the log

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of G4WXN@... <G4WXN@...>
Sent: Sunday, January 3, 2021 4:25:39 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Free DMR with DVS
 
MMDVM log shows login to master has failed.

Here's the stanza from the ini file
 
#--------Free DMR Network------
[DMR Network]
Enable=1
Address=hotspots.freedmr.uk
#HB_GB_FreeDMR_DMO
Port=62031
Jitter=360
Local=62032
Password=passw0rd
#Options=
Slot1=0
Slot2=1
Debug=0
#-------------------------
--
Derek

G4WXN


Re: Free DMR with DVS

G4WXN@...
 

MMDVM log shows login to master has failed.

Here's the stanza from the ini file
 
#--------Free DMR Network------
[DMR Network]
Enable=1
Address=hotspots.freedmr.uk
#HB_GB_FreeDMR_DMO
Port=62031
Jitter=360
Local=62032
Password=passw0rd
#Options=
Slot1=0
Slot2=1
Debug=0
#-------------------------
--
Derek

G4WXN


Re: Free DMR with DVS

G4WXN@...
 

I'll try again, defo had the password with a zero
--
Derek

G4WXN


Re: DVMEGA

N4UPC - Scott
 

Steve,

Do you have a moment to check my server via your radio?  3162356

73
Scott,
N4UPC



On 1/2/2021 3:17 PM, Steve N4IRS wrote:
[USRP]
address = 127.0.0.1                  ; point the address at the AllStar Node
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

rpt.conf
rxchannel = USRP/127.0.0.1:34001:32001 ; point the address to the DVSwitch Server
                    ; 127.0.0.1 = IP of the target application
                    ; 34001 = UDP port the target application is listening on
                    ; 32001 = UDP port ASL is listening on


On 1/2/21 4:01 PM, N4UPC - Scott via groups.io wrote:
Still fails WITHOUT update.

I now have a DVSwitch server built and it’s all good. How do I send the analog audio back and forth to one of my RasPis?

73,
Scott
N4UPC



On Sat, Jan 2, 2021 at 14:48, Steve N4IRS <szingman@...> wrote:
Do the 64 bit install again. Do not update / upgrade and retest.

On 1/2/21 3:42 PM, N4UPC - Scott via groups.io wrote:
Yes I did update.

Unless you suggest otherwise, I’m going to install DVSwitch on this server using regular 64 bit Buster, the connect it to a RasPi on the same network.

73,
Scott
N4UPC



On Sat, Jan 2, 2021 at 14:33, Steve N4IRS <szingman@...> wrote:
Did you upgrade after the install?

On 1/2/21 2:39 PM, N4UPC - Scott via groups.io wrote:
Steve,

Is there a trick to getting ASL to load on 64 bit Debian 9??  Asterisk won't start because:

dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start timed out.
Jan  2 13:16:08 ddidig01 systemd[1]: Timed out waiting for device dev-dahdi-pseudo.device.
Jan  2 13:16:08 ddidig01 systemd[1]: Dependency failed for Asterisk PBX and telephony daemon.
Jan  2 13:16:08 ddidig01 systemd[1]: asterisk.service: Job asterisk.service/start failed with result 'dependency'.
Jan  2 13:16:08 ddidig01 systemd[1]: dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start failed with result 'timeout'.

I've searched and can't find anything on this that is helpful.  Is there a way to install a normal version of 64 bit Debian 9 and then download / install the ASL?

73
Scott,
N4UPC



On 1/2/2021 11:24 AM, Steve N4IRS wrote:
Yes, I assumed you did based on what you told me.

On 1/2/21 12:22 PM, N4UPC - Scott via groups.io wrote:
Should i install the 64-bit AllStar / OS?

root@DDIDIG01:/etc/apt/sources.list.d# /usr/local/sbin/host-info.sh
-bash: /usr/local/sbin/host-info.sh: No such file or directory
root@DDIDIG01:/etc/apt/sources.list.d#
root@DDIDIG01:/etc/apt/sources.list.d# uname -a
Linux DDIDIG01 4.9.0-14-686-pae #1 SMP Debian 4.9.246-2 (2020-12-17) i686 GNU/Linux
root@DDIDIG01:/etc/apt/sources.list.d#



73
Scott,
N4UPC



On 1/2/2021 11:19 AM, Steve N4IRS wrote:
uname -a












Re: DVMEGA

N4UPC - Scott
 

Thank you!

73,
Scott
N4UPC



On Sat, Jan 2, 2021 at 15:17, Steve N4IRS <szingman@...> wrote:
[USRP]
address = 127.0.0.1                  ; point the address at the AllStar Node
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

rpt.conf
rxchannel = USRP/127.0.0.1:34001:32001 ; point the address to the DVSwitch Server
                    ; 127.0.0.1 = IP of the target application
                    ; 34001 = UDP port the target application is listening on
                    ; 32001 = UDP port ASL is listening on


On 1/2/21 4:01 PM, N4UPC - Scott via groups.io wrote:
Still fails WITHOUT update.

I now have a DVSwitch server built and it’s all good. How do I send the analog audio back and forth to one of my RasPis?

73,
Scott
N4UPC



On Sat, Jan 2, 2021 at 14:48, Steve N4IRS <szingman@...> wrote:
Do the 64 bit install again. Do not update / upgrade and retest.

On 1/2/21 3:42 PM, N4UPC - Scott via groups.io wrote:
Yes I did update.

Unless you suggest otherwise, I’m going to install DVSwitch on this server using regular 64 bit Buster, the connect it to a RasPi on the same network.

73,
Scott
N4UPC



On Sat, Jan 2, 2021 at 14:33, Steve N4IRS <szingman@...> wrote:
Did you upgrade after the install?

On 1/2/21 2:39 PM, N4UPC - Scott via groups.io wrote:
Steve,

Is there a trick to getting ASL to load on 64 bit Debian 9??  Asterisk won't start because:

dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start timed out.
Jan  2 13:16:08 ddidig01 systemd[1]: Timed out waiting for device dev-dahdi-pseudo.device.
Jan  2 13:16:08 ddidig01 systemd[1]: Dependency failed for Asterisk PBX and telephony daemon.
Jan  2 13:16:08 ddidig01 systemd[1]: asterisk.service: Job asterisk.service/start failed with result 'dependency'.
Jan  2 13:16:08 ddidig01 systemd[1]: dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start failed with result 'timeout'.

I've searched and can't find anything on this that is helpful.  Is there a way to install a normal version of 64 bit Debian 9 and then download / install the ASL?

73
Scott,
N4UPC



On 1/2/2021 11:24 AM, Steve N4IRS wrote:
Yes, I assumed you did based on what you told me.

On 1/2/21 12:22 PM, N4UPC - Scott via groups.io wrote:
Should i install the 64-bit AllStar / OS?

root@DDIDIG01:/etc/apt/sources.list.d# /usr/local/sbin/host-info.sh
-bash: /usr/local/sbin/host-info.sh: No such file or directory
root@DDIDIG01:/etc/apt/sources.list.d#
root@DDIDIG01:/etc/apt/sources.list.d# uname -a
Linux DDIDIG01 4.9.0-14-686-pae #1 SMP Debian 4.9.246-2 (2020-12-17) i686 GNU/Linux
root@DDIDIG01:/etc/apt/sources.list.d#



73
Scott,
N4UPC



On 1/2/2021 11:19 AM, Steve N4IRS wrote:
uname -a













Re: DVMEGA

Steve N4IRS
 

[USRP]
address = 127.0.0.1                  ; point the address at the AllStar Node
txPort = 32001                          ; Transmit USRP frames on this port
rxPort = 34001                          ; Listen for USRP frames on this port

rpt.conf
rxchannel = USRP/127.0.0.1:34001:32001 ; point the address to the DVSwitch Server
                    ; 127.0.0.1 = IP of the target application
                    ; 34001 = UDP port the target application is listening on
                    ; 32001 = UDP port ASL is listening on


On 1/2/21 4:01 PM, N4UPC - Scott via groups.io wrote:
Still fails WITHOUT update.

I now have a DVSwitch server built and it’s all good. How do I send the analog audio back and forth to one of my RasPis?

73,
Scott
N4UPC



On Sat, Jan 2, 2021 at 14:48, Steve N4IRS <szingman@...> wrote:
Do the 64 bit install again. Do not update / upgrade and retest.

On 1/2/21 3:42 PM, N4UPC - Scott via groups.io wrote:
Yes I did update.

Unless you suggest otherwise, I’m going to install DVSwitch on this server using regular 64 bit Buster, the connect it to a RasPi on the same network.

73,
Scott
N4UPC



On Sat, Jan 2, 2021 at 14:33, Steve N4IRS <szingman@...> wrote:
Did you upgrade after the install?

On 1/2/21 2:39 PM, N4UPC - Scott via groups.io wrote:
Steve,

Is there a trick to getting ASL to load on 64 bit Debian 9??  Asterisk won't start because:

dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start timed out.
Jan  2 13:16:08 ddidig01 systemd[1]: Timed out waiting for device dev-dahdi-pseudo.device.
Jan  2 13:16:08 ddidig01 systemd[1]: Dependency failed for Asterisk PBX and telephony daemon.
Jan  2 13:16:08 ddidig01 systemd[1]: asterisk.service: Job asterisk.service/start failed with result 'dependency'.
Jan  2 13:16:08 ddidig01 systemd[1]: dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start failed with result 'timeout'.

I've searched and can't find anything on this that is helpful.  Is there a way to install a normal version of 64 bit Debian 9 and then download / install the ASL?

73
Scott,
N4UPC



On 1/2/2021 11:24 AM, Steve N4IRS wrote:
Yes, I assumed you did based on what you told me.

On 1/2/21 12:22 PM, N4UPC - Scott via groups.io wrote:
Should i install the 64-bit AllStar / OS?

root@DDIDIG01:/etc/apt/sources.list.d# /usr/local/sbin/host-info.sh
-bash: /usr/local/sbin/host-info.sh: No such file or directory
root@DDIDIG01:/etc/apt/sources.list.d#
root@DDIDIG01:/etc/apt/sources.list.d# uname -a
Linux DDIDIG01 4.9.0-14-686-pae #1 SMP Debian 4.9.246-2 (2020-12-17) i686 GNU/Linux
root@DDIDIG01:/etc/apt/sources.list.d#



73
Scott,
N4UPC



On 1/2/2021 11:19 AM, Steve N4IRS wrote:
uname -a











Re: DVMEGA

N4UPC - Scott
 

Still fails WITHOUT update.

I now have a DVSwitch server built and it’s all good. How do I send the analog audio back and forth to one of my RasPis?

73,
Scott
N4UPC



On Sat, Jan 2, 2021 at 14:48, Steve N4IRS <szingman@...> wrote:
Do the 64 bit install again. Do not update / upgrade and retest.

On 1/2/21 3:42 PM, N4UPC - Scott via groups.io wrote:
Yes I did update.

Unless you suggest otherwise, I’m going to install DVSwitch on this server using regular 64 bit Buster, the connect it to a RasPi on the same network.

73,
Scott
N4UPC



On Sat, Jan 2, 2021 at 14:33, Steve N4IRS <szingman@...> wrote:
Did you upgrade after the install?

On 1/2/21 2:39 PM, N4UPC - Scott via groups.io wrote:
Steve,

Is there a trick to getting ASL to load on 64 bit Debian 9??  Asterisk won't start because:

dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start timed out.
Jan  2 13:16:08 ddidig01 systemd[1]: Timed out waiting for device dev-dahdi-pseudo.device.
Jan  2 13:16:08 ddidig01 systemd[1]: Dependency failed for Asterisk PBX and telephony daemon.
Jan  2 13:16:08 ddidig01 systemd[1]: asterisk.service: Job asterisk.service/start failed with result 'dependency'.
Jan  2 13:16:08 ddidig01 systemd[1]: dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start failed with result 'timeout'.

I've searched and can't find anything on this that is helpful.  Is there a way to install a normal version of 64 bit Debian 9 and then download / install the ASL?

73
Scott,
N4UPC



On 1/2/2021 11:24 AM, Steve N4IRS wrote:
Yes, I assumed you did based on what you told me.

On 1/2/21 12:22 PM, N4UPC - Scott via groups.io wrote:
Should i install the 64-bit AllStar / OS?

root@DDIDIG01:/etc/apt/sources.list.d# /usr/local/sbin/host-info.sh
-bash: /usr/local/sbin/host-info.sh: No such file or directory
root@DDIDIG01:/etc/apt/sources.list.d#
root@DDIDIG01:/etc/apt/sources.list.d# uname -a
Linux DDIDIG01 4.9.0-14-686-pae #1 SMP Debian 4.9.246-2 (2020-12-17) i686 GNU/Linux
root@DDIDIG01:/etc/apt/sources.list.d#



73
Scott,
N4UPC



On 1/2/2021 11:19 AM, Steve N4IRS wrote:
uname -a










dv switch losing connection with my allstar node

Jed Barton
 

Hey guys,

Hope everyone is doing well. So a bit of a mystery. I have dvswitch
setup on my device to connect to my allstar node. It works,, no
sweat. I can connect to the node, make outbound connections and
everything. However, if I let it sit for a while, probably 4 or 5
minutes, it will just disconnect from the node for no reason. I don't
see any errors on the screen. All i have to do is click connect, and
we're back in business. Anyone know why this might be happening? Is
there any sort of timer that I don't know about?

Cheers,

Jed


Re: DVMEGA

Steve N4IRS
 

Do the 64 bit install again. Do not update / upgrade and retest.

On 1/2/21 3:42 PM, N4UPC - Scott via groups.io wrote:
Yes I did update.

Unless you suggest otherwise, I’m going to install DVSwitch on this server using regular 64 bit Buster, the connect it to a RasPi on the same network.

73,
Scott
N4UPC



On Sat, Jan 2, 2021 at 14:33, Steve N4IRS <szingman@...> wrote:
Did you upgrade after the install?

On 1/2/21 2:39 PM, N4UPC - Scott via groups.io wrote:
Steve,

Is there a trick to getting ASL to load on 64 bit Debian 9??  Asterisk won't start because:

dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start timed out.
Jan  2 13:16:08 ddidig01 systemd[1]: Timed out waiting for device dev-dahdi-pseudo.device.
Jan  2 13:16:08 ddidig01 systemd[1]: Dependency failed for Asterisk PBX and telephony daemon.
Jan  2 13:16:08 ddidig01 systemd[1]: asterisk.service: Job asterisk.service/start failed with result 'dependency'.
Jan  2 13:16:08 ddidig01 systemd[1]: dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start failed with result 'timeout'.

I've searched and can't find anything on this that is helpful.  Is there a way to install a normal version of 64 bit Debian 9 and then download / install the ASL?

73
Scott,
N4UPC



On 1/2/2021 11:24 AM, Steve N4IRS wrote:
Yes, I assumed you did based on what you told me.

On 1/2/21 12:22 PM, N4UPC - Scott via groups.io wrote:
Should i install the 64-bit AllStar / OS?

root@DDIDIG01:/etc/apt/sources.list.d# /usr/local/sbin/host-info.sh
-bash: /usr/local/sbin/host-info.sh: No such file or directory
root@DDIDIG01:/etc/apt/sources.list.d#
root@DDIDIG01:/etc/apt/sources.list.d# uname -a
Linux DDIDIG01 4.9.0-14-686-pae #1 SMP Debian 4.9.246-2 (2020-12-17) i686 GNU/Linux
root@DDIDIG01:/etc/apt/sources.list.d#



73
Scott,
N4UPC



On 1/2/2021 11:19 AM, Steve N4IRS wrote:
uname -a








Re: DVMEGA

N4UPC - Scott
 

Yes I did update.

Unless you suggest otherwise, I’m going to install DVSwitch on this server using regular 64 bit Buster, the connect it to a RasPi on the same network.

73,
Scott
N4UPC



On Sat, Jan 2, 2021 at 14:33, Steve N4IRS <szingman@...> wrote:
Did you upgrade after the install?

On 1/2/21 2:39 PM, N4UPC - Scott via groups.io wrote:
Steve,

Is there a trick to getting ASL to load on 64 bit Debian 9??  Asterisk won't start because:

dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start timed out.
Jan  2 13:16:08 ddidig01 systemd[1]: Timed out waiting for device dev-dahdi-pseudo.device.
Jan  2 13:16:08 ddidig01 systemd[1]: Dependency failed for Asterisk PBX and telephony daemon.
Jan  2 13:16:08 ddidig01 systemd[1]: asterisk.service: Job asterisk.service/start failed with result 'dependency'.
Jan  2 13:16:08 ddidig01 systemd[1]: dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start failed with result 'timeout'.

I've searched and can't find anything on this that is helpful.  Is there a way to install a normal version of 64 bit Debian 9 and then download / install the ASL?

73
Scott,
N4UPC



On 1/2/2021 11:24 AM, Steve N4IRS wrote:
Yes, I assumed you did based on what you told me.

On 1/2/21 12:22 PM, N4UPC - Scott via groups.io wrote:
Should i install the 64-bit AllStar / OS?

root@DDIDIG01:/etc/apt/sources.list.d# /usr/local/sbin/host-info.sh
-bash: /usr/local/sbin/host-info.sh: No such file or directory
root@DDIDIG01:/etc/apt/sources.list.d#
root@DDIDIG01:/etc/apt/sources.list.d# uname -a
Linux DDIDIG01 4.9.0-14-686-pae #1 SMP Debian 4.9.246-2 (2020-12-17) i686 GNU/Linux
root@DDIDIG01:/etc/apt/sources.list.d#



73
Scott,
N4UPC



On 1/2/2021 11:19 AM, Steve N4IRS wrote:
uname -a







Re: DVMEGA

Steve N4IRS
 

Did you upgrade after the install?

On 1/2/21 2:39 PM, N4UPC - Scott via groups.io wrote:
Steve,

Is there a trick to getting ASL to load on 64 bit Debian 9??  Asterisk won't start because:

dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start timed out.
Jan  2 13:16:08 ddidig01 systemd[1]: Timed out waiting for device dev-dahdi-pseudo.device.
Jan  2 13:16:08 ddidig01 systemd[1]: Dependency failed for Asterisk PBX and telephony daemon.
Jan  2 13:16:08 ddidig01 systemd[1]: asterisk.service: Job asterisk.service/start failed with result 'dependency'.
Jan  2 13:16:08 ddidig01 systemd[1]: dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start failed with result 'timeout'.

I've searched and can't find anything on this that is helpful.  Is there a way to install a normal version of 64 bit Debian 9 and then download / install the ASL?

73
Scott,
N4UPC



On 1/2/2021 11:24 AM, Steve N4IRS wrote:
Yes, I assumed you did based on what you told me.

On 1/2/21 12:22 PM, N4UPC - Scott via groups.io wrote:
Should i install the 64-bit AllStar / OS?

root@DDIDIG01:/etc/apt/sources.list.d# /usr/local/sbin/host-info.sh
-bash: /usr/local/sbin/host-info.sh: No such file or directory
root@DDIDIG01:/etc/apt/sources.list.d#
root@DDIDIG01:/etc/apt/sources.list.d# uname -a
Linux DDIDIG01 4.9.0-14-686-pae #1 SMP Debian 4.9.246-2 (2020-12-17) i686 GNU/Linux
root@DDIDIG01:/etc/apt/sources.list.d#



73
Scott,
N4UPC



On 1/2/2021 11:19 AM, Steve N4IRS wrote:
uname -a





Re: Free DMR with DVS

Steve N4IRS
 

On 1/2/21 2:37 PM, Sean Burton wrote:
On Sat, Jan 2, 2021 at 01:36 PM, <G4WXN@...> wrote:

I have been trying to configure my system to access the Free DMR network.

I have tried using the information from this page
http://www.freedmr.uk/index.php/pi-star-settings-for-hotspots/
Does not work, I have even tried using the ip address rather than the server address same problem, just hit a wall.

Has anyone else tried this? and succeeded?


--
Derek

G4WXN


 On Sat, Jan 2, 2021 at 01:36 PM, <G4WXN@...> wrote:

I have been trying to configure my system to access the Free DMR network.

I have tried using the information from this page
http://www.freedmr.uk/index.php/pi-star-settings-for-hotspots/
Does not work, I have even tried using the ip address rather than the server address same problem, just hit a wall.

Has anyone else tried this? and succeeded?


--
Derek

G4WXN


 There has been some maintenance carried out on the FreeDMR system and this has caused some log in issues. It's a new network so this will happen until they finally get it stabilised. 


Re: DVMEGA

N4UPC - Scott
 

Steve,

Is there a trick to getting ASL to load on 64 bit Debian 9??  Asterisk won't start because:

dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start timed out.
Jan  2 13:16:08 ddidig01 systemd[1]: Timed out waiting for device dev-dahdi-pseudo.device.
Jan  2 13:16:08 ddidig01 systemd[1]: Dependency failed for Asterisk PBX and telephony daemon.
Jan  2 13:16:08 ddidig01 systemd[1]: asterisk.service: Job asterisk.service/start failed with result 'dependency'.
Jan  2 13:16:08 ddidig01 systemd[1]: dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start failed with result 'timeout'.

I've searched and can't find anything on this that is helpful.  Is there a way to install a normal version of 64 bit Debian 9 and then download / install the ASL?

73
Scott,
N4UPC



On 1/2/2021 11:24 AM, Steve N4IRS wrote:
Yes, I assumed you did based on what you told me.

On 1/2/21 12:22 PM, N4UPC - Scott via groups.io wrote:
Should i install the 64-bit AllStar / OS?

root@DDIDIG01:/etc/apt/sources.list.d# /usr/local/sbin/host-info.sh
-bash: /usr/local/sbin/host-info.sh: No such file or directory
root@DDIDIG01:/etc/apt/sources.list.d#
root@DDIDIG01:/etc/apt/sources.list.d# uname -a
Linux DDIDIG01 4.9.0-14-686-pae #1 SMP Debian 4.9.246-2 (2020-12-17) i686 GNU/Linux
root@DDIDIG01:/etc/apt/sources.list.d#



73
Scott,
N4UPC



On 1/2/2021 11:19 AM, Steve N4IRS wrote:
uname -a



1721 - 1740 of 9882