1. main@DVSwitch.groups.io
  2. Messages
   Date   
Re: Location of the P25Gateway

Steve N4IRS
 

Sure, you can test on dvswitch.org port 43166 Dashboard at <http://dvswitch.org/P25_DVSwitch/> That's what it's there for.

Are you sure that it was P25 wide or narrow? Not YSF? URL?

On 1/6/2021 8:12 AM, Jay wrote:
It is properly in the "Private" P25Hosts.txt.  Path to it is good.  Hotspot links to it but does not stay connected.  May be a clue. Checked ports again.  Studying the posts I find that P25Gateway probably does not tell you when it receives traffic.  Nor are there really any error messages.  It may be ok and the problem at the reflector, but there is so little to configure at the reflector.  It does however seem to not be seeing traffic from the Gateway machine.  Ports??  The look open.

Next step is reconfigure to go to a known good reflector (DVSwitch Test?).  ?That will narrow down the location of the error.  Just wish there were a few more error messages.  After this I am going to try to document my eventual success.

BTW I came across a post concerning adding txPortN and rxPortN, etc to the ini file to allow both Wide and Narrow P25.  Did that ever come to pass?  Curious, Wide is all I really want.



--


--

jb   N4NQY

Re: Location of the P25Gateway

Jay
 

It is properly in the "Private" P25Hosts.txt.  Path to it is good.  Hotspot links to it but does not stay connected.  May be a clue. Checked ports again.  Studying the posts I find that P25Gateway probably does not tell you when it receives traffic.  Nor are there really any error messages.  It may be ok and the problem at the reflector, but there is so little to configure at the reflector.  It does however seem to not be seeing traffic from the Gateway machine.  Ports??  The look open.

Next step is reconfigure to go to a known good reflector (DVSwitch Test?).  ?That will narrow down the location of the error.  Just wish there were a few more error messages.  After this I am going to try to document my eventual success.

BTW I came across a post concerning adding txPortN and rxPortN, etc to the ini file to allow both Wide and Narrow P25.  Did that ever come to pass?  Curious, Wide is all I really want.



--


--

jb   N4NQY
Re: Location of the P25Gateway

Tony Langdon
 

That's rather odd.  Mine worked first go when I moved DVSwitch away from the machine running P25Reflector.  Just checked it now to be sure.

Is your reflector correctly listed in a hosts (either the main P25 hosts file or the private one) file on the gateway machine?  If it's a public reflector, what's the TG number?

On 6/1/21 2:50 pm, Jay wrote:
Tha worked, but I seem to now have no traffic through my P25 Gateway.  Ports are set per example.  Data flows through Analog_Bridge to MMDVM_Bridge but no activity shows in P25Gateway and the Gateway never shows up in the Reflector as connecting to the Reflector Port.  Gateway shows "linked at Startup to Reflector xxxxx" but disconnects shorty thereafter with a "no response from xxxxx, unlinking message.  I have read everything in the Group.io forums about P25Gateway and Reflector, but it is not well documented, but maybe the thought is that it doesn't have to be??

Anyone have this issue and can point me to possible cause.
--

jb   N4NQY 


-- 
73 de Tony VK3JED/VK3IRL
http://vkradio.com
Re: ASL->TGIF Prime #analog_bridge #mmdvm_bridge #dmrlink

Justin Painter
 

I was using Hamvoip as I was trying to use a Pi4 (seems to be the only option currently for ASL + DVswitch, happy to be corrected there).  I reinstalled with a 3b plus and the ASL Rpi image and installed dvswitch and setup the bridge, all is working now.  I guess the extra Pi4 horsepower will have to wait for later.

AF5LW
Re: Location of the P25Gateway

Steve N4IRS
 

Can you connect a hotspot to the reflector?
Is the port number in the host file the same as the reflector?
Are you sure the reflector is listening on the UDP port it think it is? (netstat -unap)
Can your gateway connect to another reflector?

Steve N4IRS

On 1/5/21 10:50 PM, Jay wrote:
Tha worked, but I seem to now have no traffic through my P25 Gateway.  Ports are set per example.  Data flows through Analog_Bridge to MMDVM_Bridge but no activity shows in P25Gateway and the Gateway never shows up in the Reflector as connecting to the Reflector Port.  Gateway shows "linked at Startup to Reflector xxxxx" but disconnects shorty thereafter with a "no response from xxxxx, unlinking message.  I have read everything in the Group.io forums about P25Gateway and Reflector, but it is not well documented, but maybe the thought is that it doesn't have to be??

Anyone have this issue and can point me to possible cause.
--

jb   N4NQY

?
smime.p7s

Re: Location of the P25Gateway

Jay
 

Tha worked, but I seem to now have no traffic through my P25 Gateway.  Ports are set per example.  Data flows through Analog_Bridge to MMDVM_Bridge but no activity shows in P25Gateway and the Gateway never shows up in the Reflector as connecting to the Reflector Port.  Gateway shows "linked at Startup to Reflector xxxxx" but disconnects shorty thereafter with a "no response from xxxxx, unlinking message.  I have read everything in the Group.io forums about P25Gateway and Reflector, but it is not well documented, but maybe the thought is that it doesn't have to be??

Anyone have this issue and can point me to possible cause.
--

jb   N4NQY
ASL->TGIF Prime #analog_bridge #mmdvm_bridge #dmrlink

Justin Painter
 

Hello,
I have a Archlinux Hamvoip node that I pulled down Dvswitch from the repository and have ASL<->Prime TGIF working.  I have the audio levels sounding pretty good after tweaking some on the Analog bridge gain settings.  I do still have more delay in the ASL->DMR direction than I was expecting, in the 3000-3500ms range.  It seems fine in the other direction (to ASL from DMR) When I say delay, I mean a transmission will key up on the ASL side and start talking and the first sentence is generally missed.  I know I've got something set up wrong, but I am having trouble finding it!

Thanks,
AF5LW
Re: Location of the P25Gateway

Jay
 


Thanks, we will give it a try

jb   N4NQY
Re: Location of the P25Gateway

Tony Langdon
 

As others have said, that looks like a path (does the path exist?) or permissions issue.

On 6/1/21 2:08 am, Jay wrote:
The server throws the following error when I start the reflector:

/opt/P25Reflector# P25Gateway: unable to open the log file


Any idea how to get rid of the error and get it working normally??   


jb   N4NQY



-- 
73 de Tony VK3JED/VK3IRL
http://vkradio.com
Re: Location of the P25Gateway

Jeff - WA3PNY
 

Hi Jay,

You might check the file location in the ‘ini’ file, but more likely, it is a permission problem.  I change the ownership of the log folder to mmdvm:mmdvm, which usually allows the creation of the log file.

Jeff
WA3PNY

On Jan 5, 2021, at 10:08 AM, Jay <jay.n4nqy@...> wrote:

The server throws the following error when I start the reflector:

/opt/P25Reflector# P25Gateway: unable to open the log file


Any idea how to get rid of the error and get it working normally??   


jb   N4NQY
Re: Location of the P25Gateway

Steve N4IRS
 

Check the ini,find the log section, make sure the path exists

On 1/5/2021 10:08 AM, Jay wrote:
The server throws the following error when I start the reflector:

/opt/P25Reflector# P25Gateway: unable to open the log file


Any idea how to get rid of the error and get it working normally??   


jb   N4NQY
Re: Location of the P25Gateway

Jay
 

The server throws the following error when I start the reflector:

/opt/P25Reflector# P25Gateway: unable to open the log file


Any idea how to get rid of the error and get it working normally??   


jb   N4NQY
Re: XLX Reflector

N4UPC - Scott
 

Thanks!

73,
Scott
N4UPC



On Tue, Jan 5, 2021 at 01:28, Tony Langdon <vk3jed@...> wrote:
On 5/1/21 4:41 pm, N4UPC - Scott via groups.io wrote:
> I am looking into installing an XLX reflector. Would it be possible to
> run this on the same server as DVSwitch? Also what are the advantages
> of using an XLX reflector with DVSwitch?
I had to put my reflector on a different host, because xlxd and
ircDDBGateway listen on the same UDP ports.  My DVSwitch setup requires
ircDDBGateway, which I'm using for D-STAR, along with DummyRepeater,
because this combination is compatible with the old blue DV Dongle that
I had on hand.

But I notice that my stock DVSwitch installation on my AllStar node also
runs ircDDBGateway, so I'd say definitely run xlxd on a different host,
unless you're not planning on doing D-STAR.
>
> I’ve found a few sites that tell you how to build XLX reflectors, but
> none yet that tell you why you’d want one.
>
Uses for XLX reflectors:

1.  host multiple D-STAR channels (up to 26)
2.  Host a YSF reflector on the same host
3.  Host a DMR reflector...
4.  Transcode between the 3 modes (requires an AMBE 3000 based device
per simultaneous transcoding channel)
5.  Link to other XLX reflectors to increase capacity and reliability.

My XLX reflector has 26 channels.  One is dedicated to YSF, and one
channel is permanently linked to my transcoding DV Switch server (XLX432 D).

--
73 de Tony VK3JED/VK3IRL
http://vkradio.com
Re: XLX Reflector

Tony Langdon
 

On 5/1/21 4:41 pm, N4UPC - Scott via groups.io wrote:
I am looking into installing an XLX reflector. Would it be possible to
run this on the same server as DVSwitch? Also what are the advantages
of using an XLX reflector with DVSwitch?
I had to put my reflector on a different host, because xlxd and
ircDDBGateway listen on the same UDP ports.  My DVSwitch setup requires
ircDDBGateway, which I'm using for D-STAR, along with DummyRepeater,
because this combination is compatible with the old blue DV Dongle that
I had on hand.

But I notice that my stock DVSwitch installation on my AllStar node also
runs ircDDBGateway, so I'd say definitely run xlxd on a different host,
unless you're not planning on doing D-STAR.

I’ve found a few sites that tell you how to build XLX reflectors, but
none yet that tell you why you’d want one.
Uses for XLX reflectors:

1.  host multiple D-STAR channels (up to 26)
2.  Host a YSF reflector on the same host
3.  Host a DMR reflector...
4.  Transcode between the 3 modes (requires an AMBE 3000 based device
per simultaneous transcoding channel)
5.  Link to other XLX reflectors to increase capacity and reliability.

My XLX reflector has 26 channels.  One is dedicated to YSF, and one
channel is permanently linked to my transcoding DV Switch server (XLX432 D).

--
73 de Tony VK3JED/VK3IRL
http://vkradio.com
Re: Location of the P25Gateway

Tony Langdon
 

On 5/1/21 3:12 pm, Jay wrote:
Trying to put my P25 Reflector in the Cloud.  Does the P25Gateway have
to be on the same server as the reflector?  When I try to start the
P25Reflector without a local gateway, it throws a Gateway error
refering to the log files.  There is no P25Gateway on that server.  it
is on a local box along with the MMDVM_Bridge, etc.
No, P25Gateway does not need to be on the same host as the reflector.  I
run P25Gateway on the same system as DVSwitch.  P25Reflector runs on a
separate server.

So should I move the P25Gateway to the Cloud server or make some other
changes?

No, should be fine.  Just have to make sure that P25Gateway can reach
the reflector (whether public or private).

--
73 de Tony VK3JED/VK3IRL
http://vkradio.com
XLX Reflector

N4UPC - Scott
 

I am looking into installing an XLX reflector. Would it be possible to run this on the same server as DVSwitch? Also what are the advantages of using an XLX reflector with DVSwitch?

I’ve found a few sites that tell you how to build XLX reflectors, but none yet that tell you why you’d want one.
Location of the P25Gateway

Jay
 

Trying to put my P25 Reflector in the Cloud.  Does the P25Gateway have to be on the same server as the reflector?  When I try to start the P25Reflector without a local gateway, it throws a Gateway error refering to the log files.  There is no P25Gateway on that server.  it is on a local box along with the MMDVM_Bridge, etc.

So should I move the P25Gateway to the Cloud server or make some other changes?

73  jb  N4NQY
Re: Tuning

N4UPC - Scott
 

Okay, thanks.

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 18:05, Corey Dean N3FE <n3fe@...> wrote:
We are no longer issuing talkgroups in the US.  We would have ran out a long time ago.  People are to use their dmr I’d as a group call or a repeater of.

Sorry but that is how it has to be.

Corey n3fe


On Jan 4, 2021, at 5:45 PM, N4UPC - Scott via groups.io <n4upc@...> wrote:


Hey Corey, I’m currently using my ID as a TG for a busy area. At what point should I request an actual TG number?

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 16:40, Corey Dean N3FE <n3fe@...> wrote:
Thank you!  Only 882 more shelf devices left to get the password changed!


On Jan 4, 2021, at 3:13 PM, N4UPC - Scott via groups.io <n4upc@...> wrote:


05 now fixed. Thanks!

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 12:55, Corey Dean N3FE <n3fe@...> wrote:
I am looking At the master logs, you have been receiving 91 well before you make it a static talkgroup on your device ending in 20.

Second please update your device ending in 05.  It is sending the wrong password to bm.

Corey n3fe

Sorry for the use of the bandwidth.  I just figured I would catch him while I could





On Jan 4, 2021, at 11:02 AM, N4UPC - Scott via groups.io <n4upc@...> wrote:


When I set a static TG in self care, it started working.

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 09:58, Steve N4IRS <szingman@...> wrote:
Yes, it's logged into 3102. Are you in DMR mode? I suggest you do a mode command and then a tune.

On 1/4/2021 10:50 AM, N4UPC - Scott via groups.io wrote:
M: 2021-01-04 15:32:04.534 DMR, Remote CMD: txTg=93
M: 2021-01-04 15:32:04.534 DMR, Tune: id=316235620, tg=93, mode=Group
M: 2021-01-04 15:32:04.549 DMR, Remote CMD: info
M: 2021-01-04 15:38:35.269 DMR, Remote CMD: txTg=3162356
M: 2021-01-04 15:38:35.269 DMR, Tune: id=316235620, tg=3162356, mode=Group
M: 2021-01-04 15:38:35.290 DMR, Remote CMD: info



73
Scott,
N4UPC



On 1/4/2021 9:43 AM, Steve N4IRS wrote:
What is in your MMDVM_Bridge log when you tune?

On 1/4/2021 10:42 AM, N4UPC - Scott via groups.io wrote:
I’m using the dvswitch.sh script to ‘tune’ the talkgroup number.

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 09:35, Steve N4IRS <szingman@...> wrote:
They should not be.
<https://brandmeister.network/?page=lh&jsonquery=%7B%22condition%22%3A%22OR%22%2C%22rules%22%3A%5B%7B%22id%22%3A%22DestinationID%22%2C%22field%22%3A%22DestinationID%22%2C%22type%22%3A%22integer%22%2C%22input%22%3A%22text%22%2C%22operator%22%3A%22equal%22%2C%22value%22%3A%2291%22%7D%2C%7B%22id%22%3A%22DestinationID%22%2C%22field%22%3A%22DestinationID%22%2C%22type%22%3A%22integer%22%2C%22input%22%3A%22text%22%2C%22operator%22%3A%22equal%22%2C%22value%22%3A%2293%22%7D%5D%7D>

On 1/4/2021 10:23 AM, N4UPC - Scott via groups.io wrote:
Maybe the few samples I’ve had aren’t a good test. 91 & 93 are dead!

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 09:17, Steve N4IRS <szingman@...> wrote:
I don't know what to tell you. You are using the hardware vocoder, that's the best you can get. Maybe someone else can pop in and tell us what they think of the audio. I have no issues with it.

Steve

On 1/4/2021 10:12 AM, N4UPC - Scott via groups.io wrote:
I was listening on the dashboard and yes, I was comparing it to a radio.

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 08:52, Steve N4IRS <szingman@...> wrote:
OK, everything looks good and your hardware vocoder is being used. Are you listening on AllStar or the RX Monitor. Are you comparing against a DMR radio?

Steve

On 1/4/2021 9:42 AM, N4UPC - Scott via groups.io wrote:
./Analog_Bridge Analog_Bridge.ini
I: 2021-01-04 14:39:43.166 Analog_Bridge Version 1.6.0 Tue Oct 27 06:22:29 EDT 2020
I: 2021-01-04 14:39:43.166 Copyright (C) 2018, 2019, 2020 DVSwitch, INAD.
I: 2021-01-04 14:39:43.166 Created by Mike N4IRR and Steve N4IRS
I: 2021-01-04 14:39:43.166 Analog_Bridge comes with ABSOLUTELY NO WARRANTY
I: 2021-01-04 14:39:43.166
I: 2021-01-04 14:39:43.166 This software is for use on amateur radio networks only,
I: 2021-01-04 14:39:43.166 it is to be used for educational purposes only. Its use on
I: 2021-01-04 14:39:43.166 commercial networks is strictly prohibited.
I: 2021-01-04 14:39:43.166
I: 2021-01-04 14:39:43.166 Analog_Bridge is starting
M: 2021-01-04 14:39:43.168 Setting [MACROS] var AB_DIR -> /var/lib/dvswitch
M: 2021-01-04 14:39:43.169 Setting [MACROS] var MMDVM_DIR -> /var/lib/mmdvm
M: 2021-01-04 14:39:43.170 Setting [MACROS] var NODE_DIR -> /tmp
M: 2021-01-04 14:39:43.171 Setting [MACROS] var DVS_DIR -> /usr/local/dvs
M: 2021-01-04 14:39:43.172 Setting [MACROS] var DVSWITCH -> /opt/MMDVM_Bridge/dvswitch.sh
M: 2021-01-04 14:39:43.173 Setting [MACROS] var DVSM -> ./dvsm.sh
M: 2021-01-04 14:39:43.174 Setting [MACROS] var MACRO -> ${DVSWITCH} macro
M: 2021-01-04 14:39:43.175 Setting [MACROS] var MESSAGE -> ${DVSWITCH} message
M: 2021-01-04 14:39:43.175 Setting [MACROS] OnRegister -> ${DVSWITCH} menu adv_main.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] DMR -> ${DVSM} dmr
M: 2021-01-04 14:39:43.175 Setting [MACROS] DSTAR -> ${DVSM} dstar
M: 2021-01-04 14:39:43.175 Setting [MACROS] NXDN -> ${DVSM} nxdn
M: 2021-01-04 14:39:43.175 Setting [MACROS] P25 -> ${DVSM} p25
M: 2021-01-04 14:39:43.175 Setting [MACROS] YSF -> ${DVSM} ysf
M: 2021-01-04 14:39:43.175 Setting [MACROS] 0 -> ${MACRO} adv_main.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] mainmenu -> ${MACRO} adv_main.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] audio -> ${MACRO} adv_audio.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] dmr -> ${MACRO} adv_dmr.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] temp -> ${MACRO} adv_temp.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] sys -> ${MACRO} adv_sys.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] txgain -> ${DVSM} tx_gain
M: 2021-01-04 14:39:43.175 Setting [MACROS] rxgain -> ${DVSM} rx_gain
M: 2021-01-04 14:39:43.175 Setting [MACROS] hotspot -> ${MACRO} adv_hotspot.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] tgref -> ${MACRO} adv_tgref.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] tools -> ${MACRO} adv_tools.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] push_tg_ref -> ${DVSM} push_tg_ref
M: 2021-01-04 14:39:43.175 Setting [MACROS] resetfvrt -> ${MACRO} adv_resetfvrt.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] resetyes -> ${DVSM} reset_fvrt_db
M: 2021-01-04 14:39:43.175 Setting [MACROS] managetg -> ${MACRO} adv_managetg.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] ver -> ${MESSAGE} "$(${DVSWITCH} version)"
M: 2021-01-04 14:39:43.175 Setting [MACROS] ver_ab -> ${MESSAGE} "AB Version   $(${DVSWITCH} version A           B)"
M: 2021-01-04 14:39:43.175 Setting [MACROS] temp -> sudo ${DVS_DIR}/temp.sh
M: 2021-01-04 14:39:43.175 Setting [MACROS] temp_on -> sudo ${DVS_DIR}/temp_msg.sh -y
M: 2021-01-04 14:39:43.175 Setting [MACROS] temp_off -> sudo ${DVS_DIR}/temp_msg.sh -n
M: 2021-01-04 14:39:43.175 Setting [MACROS] extra_1 -> ${MACRO} extra_1.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] extra_2 -> ${MACRO} extra_2.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] extra_3 -> ${MACRO} extra_3.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] extra_4 -> ${MACRO} extra_4.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] extra_5 -> ${MACRO} extra_5.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] 44 -> ${DVSM} drop_dynamic_tg
M: 2021-01-04 14:39:43.176 Setting [MACROS] 11 -> ${DVSM} hotspot_1
M: 2021-01-04 14:39:43.176 Setting [MACROS] 12 -> ${DVSM} hotspot_2
M: 2021-01-04 14:39:43.176 Setting [MACROS] 13 -> ${DVSM} hotspot_3
M: 2021-01-04 14:39:43.176 Setting [MACROS] 77 -> ${DVSM} cpu_doc
M: 2021-01-04 14:39:43.176 Setting [MACROS] 88 -> ${DVSM} restart
M: 2021-01-04 14:39:43.176 Setting [MACROS] 99 -> ${DVSM} reboot
M: 2021-01-04 14:39:43.176 Setting [MACROS] 00 -> sudo shutdown -h now
M: 2021-01-04 14:39:43.176 Setting [MACROS] update -> ${DVSWITCH} update;${DVSWITCH} reloadDatabase
M: 2021-01-04 14:39:43.176 Setting [MACROS] dbupdate -> ${DVSWITCH} collectProcessPushDataFiles
M: 2021-01-04 14:39:43.176 Setting [MACROS] bm -> ${DVSM} bm
M: 2021-01-04 14:39:43.176 Setting [MACROS] tgif -> ${DVSM} tgif
M: 2021-01-04 14:39:43.176 Setting [MACROS] dmrplus -> ${DVSM} dmrplus
M: 2021-01-04 14:39:43.176 Setting [MACROS] other1 -> ${DVSM} other1
M: 2021-01-04 14:39:43.176 Setting [MACROS] other2 -> ${DVSM} other2
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_p_0.20 -> ${DVSM} tx_p_0.20
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_p_0.15 -> ${DVSM} tx_p_0.15
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_p_0.10 -> ${DVSM} tx_p_0.10
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_p_0.05 -> ${DVSM} tx_p_0.05
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_c_0.00 -> ${DVSM} tx_c_0.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_m_0.05 -> ${DVSM} tx_m_0.05
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_m_0.10 -> ${DVSM} tx_m_0.10
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_m_0.15 -> ${DVSM} tx_m_0.15
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_m_0.20 -> ${DVSM} tx_m_0.20
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_0.00 -> ${DVSM} rx_0.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_1.00 -> ${DVSM} rx_1.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_2.00 -> ${DVSM} rx_2.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_3.00 -> ${DVSM} rx_3.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_4.00 -> ${DVSM} rx_4.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_5.00 -> ${DVSM} rx_5.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_6.00 -> ${DVSM} rx_6.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_7.00 -> ${DVSM} rx_7.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_8.00 -> ${DVSM} rx_8.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_9.00 -> ${DVSM} rx_9.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_10.0 -> ${DVSM} rx_10.0
M: 2021-01-04 14:39:43.176 Setting [MACROS] DD -> ${DVSM} del_fvrt
M: 2021-01-04 14:39:43.176 Setting [MACROS] AA -> ${DVSM} add_fvrt 0
M: 2021-01-04 14:39:43.176 Setting [MACROS] A1 -> ${DVSM} add_fvrt 2
M: 2021-01-04 14:39:43.176 Setting [MACROS] A2 -> ${DVSM} add_fvrt 3
M: 2021-01-04 14:39:43.176 Setting [MACROS] A3 -> ${DVSM} add_fvrt 4
M: 2021-01-04 14:39:43.176 Setting [MACROS] A4 -> ${DVSM} add_fvrt 5
M: 2021-01-04 14:39:43.176 Setting [MACROS] A5 -> ${DVSM} add_fvrt 6
M: 2021-01-04 14:39:43.176 Setting [MACROS] A6 -> ${DVSM} add_fvrt 7
M: 2021-01-04 14:39:43.176 Setting [MACROS] A7 -> ${DVSM} add_fvrt 8
M: 2021-01-04 14:39:43.176 Setting [MACROS] A8 -> ${DVSM} add_fvrt 9
M: 2021-01-04 14:39:43.176 Setting [MACROS] A9 -> ${DVSM} add_fvrt 10
M: 2021-01-04 14:39:43.176 Setting [] include -> dvsm.macro
M: 2021-01-04 14:39:43.176 Setting [GENERAL] logLevel -> 2
M: 2021-01-04 14:39:43.176 Setting [GENERAL] exportMetadata -> true
M: 2021-01-04 14:39:43.176 Setting [GENERAL] transferRootDir -> /tmp
M: 2021-01-04 14:39:43.176 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2021-01-04 14:39:43.176 Setting [GENERAL] decoderFallBack -> true
M: 2021-01-04 14:39:43.176 Setting [GENERAL] useEmulator -> true
M: 2021-01-04 14:39:43.176 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2021-01-04 14:39:43.176 Setting [GENERAL] pcmPort -> 2222
M: 2021-01-04 14:39:43.176 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] txPort -> 31103
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] minTxTimeMS -> 2500
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] gatewayDmrId -> 3162356
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] repeaterID -> 316235620
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] txTg -> 3162356
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] txTs -> 2
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] colorCode -> 1
M: 2021-01-04 14:39:43.177 Setting [USRP] address -> 192.168.1.230
M: 2021-01-04 14:39:43.177 Setting [USRP] txPort -> 32001
M: 2021-01-04 14:39:43.177 Setting [USRP] rxPort -> 34001
M: 2021-01-04 14:39:43.177 Setting [USRP] usrpAudio -> AUDIO_USE_GAIN
M: 2021-01-04 14:39:43.177 Setting [USRP] usrpGain -> 4.00
M: 2021-01-04 14:39:43.177 Setting [USRP] usrpAGC -> -20,10,100
M: 2021-01-04 14:39:43.177 Setting [USRP] tlvAudio -> AUDIO_USE_GAIN
M: 2021-01-04 14:39:43.177 Setting [USRP] tlvGain -> 0.25
M: 2021-01-04 14:39:43.177 Setting [DV3000] address -> /dev/ttyUSB0
M: 2021-01-04 14:39:43.177 Setting [DV3000] baud -> 460800
M: 2021-01-04 14:39:43.177 Setting [DV3000] serial -> true
I: 2021-01-04 14:39:43.177 Open UDP listener on 127.0.0.1:31100
I: 2021-01-04 14:39:43.177 Open USRP on 192.168.1.230:32001
M: 2021-01-04 14:39:43.177 Connecting to DV3000 hardware......
M: 2021-01-04 14:39:43.249 Begin DV3000 decode
M: 2021-01-04 14:39:43.249 DV3000U latency is currently set to 1
Project 25 IMBE Encoder/Decoder Fixed-Point implementation
Developed by Pavel Yazev E-mail: pyazev@...
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions; see the file ``LICENSE'' for details.
I: 2021-01-04 14:39:43.439 Subscriber IDs loaded: 182602
I: 2021-01-04 14:39:43.439 Default extended metadata <N4UPC>
I: 2021-01-04 14:39:43.439 Connecting to emulator on host 127.0.0.1:2470
I: 2021-01-04 14:39:43.439 Using hardware AMBE vocoder
I: 2021-01-04 14:39:43.439 Sending to USRP clients at 192.168.1.230 on port(s) 32001
I: 2021-01-04 14:39:43.439 Sending PCM to  clients at 127.0.0.1 on port 2222
I: 2021-01-04 14:39:43.439 Starting TLV --> Analog_Bridge (decoder) --> USRP thread
I: 2021-01-04 14:39:43.439 Starting USRP --> Analog_Bridge (encoder) -> TLV thread



ps ax
  PID TTY      STAT   TIME COMMAND
    1 ?        Ss     0:02 /sbin/init
    2 ?        S      0:00 [kthreadd]
    3 ?        I<     0:00 [rcu_gp]
    4 ?        I<     0:00 [rcu_par_gp]
    6 ?        I<     0:00 [kworker/0:0H-kblockd]
    8 ?        I<     0:00 [mm_percpu_wq]
    9 ?        S      0:00 [ksoftirqd/0]
   10 ?        I      0:46 [rcu_sched]
   11 ?        I      0:00 [rcu_bh]
   12 ?        S      0:00 [migration/0]
   14 ?        S      0:00 [cpuhp/0]
   15 ?        S      0:00 [cpuhp/1]
   16 ?        S      0:01 [migration/1]
   17 ?        S      0:00 [ksoftirqd/1]
   19 ?        I<     0:00 [kworker/1:0H-kblockd]
   20 ?        S      0:00 [cpuhp/2]
   21 ?        S      0:00 [migration/2]
   22 ?        S      0:00 [ksoftirqd/2]
   24 ?        I<     0:00 [kworker/2:0H-kblockd]
   25 ?        S      0:00 [cpuhp/3]
   26 ?        S      0:01 [migration/3]
   27 ?        S      0:00 [ksoftirqd/3]
   29 ?        I<     0:00 [kworker/3:0H-kblockd]
   30 ?        S      0:00 [cpuhp/4]
   31 ?        S      0:00 [migration/4]
   32 ?        S      0:00 [ksoftirqd/4]
   34 ?        I<     0:00 [kworker/4:0H-kblockd]
   35 ?        S      0:00 [cpuhp/5]
   36 ?        S      0:01 [migration/5]
   37 ?        S      0:00 [ksoftirqd/5]
   39 ?        I<     0:00 [kworker/5:0H-kblockd]
   40 ?        S      0:00 [cpuhp/6]
   41 ?        S      0:01 [migration/6]
   42 ?        S      0:00 [ksoftirqd/6]
   44 ?        I<     0:00 [kworker/6:0H-kblockd]
   45 ?        S      0:00 [cpuhp/7]
   46 ?        S      0:01 [migration/7]
   47 ?        S      0:00 [ksoftirqd/7]
   49 ?        I<     0:00 [kworker/7:0H-kblockd]
   50 ?        S      0:00 [kdevtmpfs]
   51 ?        I<     0:00 [netns]
   52 ?        S      0:00 [kauditd]
   53 ?        S      0:00 [khungtaskd]
   54 ?        S      0:00 [oom_reaper]
   55 ?        I<     0:00 [writeback]
   56 ?        S      0:00 [kcompactd0]
   57 ?        SN     0:00 [ksmd]
   58 ?        SN     0:00 [khugepaged]
   59 ?        I<     0:00 [crypto]
   60 ?        I<     0:00 [kintegrityd]
   61 ?        I<     0:00 [kblockd]
   62 ?        I<     0:00 [edac-poller]
   63 ?        I<     0:00 [devfreq_wq]
   64 ?        S      0:00 [watchdogd]
   65 ?        S      0:00 [kswapd0]
   84 ?        I<     0:00 [kthrotld]
   85 ?        I<     0:00 [ipv6_addrconf]
   96 ?        I<     0:00 [kstrp]
  142 ?        I<     0:00 [acpi_thermal_pm]
  203 ?        I      0:05 [kworker/6:1-events]
  204 ?        I<     0:00 [ata_sff]
  210 ?        S      0:00 [scsi_eh_0]
  211 ?        I<     0:00 [scsi_tmf_0]
  212 ?        S      0:00 [scsi_eh_1]
  213 ?        I<     0:00 [scsi_tmf_1]
  214 ?        S      0:00 [scsi_eh_2]
  215 ?        I<     0:00 [scsi_tmf_2]
  216 ?        S      0:00 [scsi_eh_3]
  218 ?        I<     0:00 [scsi_tmf_3]
  219 ?        S      0:00 [scsi_eh_4]
  220 ?        I<     0:00 [scsi_tmf_4]
  221 ?        S      0:00 [scsi_eh_5]
  222 ?        I<     0:00 [scsi_tmf_5]
  227 ?        I      0:01 [kworker/u16:5-events_unbound]
  255 ?        I      0:05 [kworker/5:2-events]
  257 ?        I<     0:00 [kworker/1:1H-kblockd]
  272 ?        I<     0:00 [kworker/3:1H-kblockd]
  285 ?        I<     0:00 [kworker/2:1H-kblockd]
  288 ?        I<     0:00 [kworker/u17:0]
  290 ?        I<     0:00 [kworker/5:1H-kblockd]
  291 ?        S      0:03 [jbd2/sda1-8]
  292 ?        I<     0:00 [ext4-rsv-conver]
  296 ?        I<     0:00 [kworker/4:1H-kblockd]
  300 ?        I<     0:00 [kworker/6:1H-kblockd]
  302 ?        I<     0:00 [kworker/0:1H-kblockd]
  306 ?        I<     0:00 [kworker/7:1H-kblockd]
  326 ?        Ss     0:00 /lib/systemd/systemd-journald
  345 ?        Ss     0:00 /lib/systemd/systemd-udevd
  350 ?        Ss     0:00 /lib/systemd/systemd-networkd
  432 ?        S      0:00 [irq/35-mei_me]
  468 ?        Ss     0:00 /sbin/dhclient -4 -v -i -pf /run/dhclient.enp3s0.pid -lf /var/lib/dhcp/dhclient.enp3s0
  478 ?        I      0:06 [kworker/0:3-events]
  484 ?        Ssl    0:00 /lib/systemd/systemd-timesyncd
  491 ?        Ss     0:00 /usr/sbin/cron -f
  493 ?        Ss     0:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activa
  497 ?        Ss     0:00 /lib/systemd/systemd-logind
  498 ?        Ssl    0:00 /usr/sbin/rsyslogd -n -iNONE
  504 ?        Ssl    0:00 /usr/bin/qemu-arm-static /opt/md380-emu/md380-emu -S 2470
  508 ?        Ss     0:00 /usr/sbin/sshd -D
  510 ?        Sl     0:19 /usr/bin/monit -c /etc/monit/monitrc
  569 ?        Ss     1:37 /usr/sbin/lighttpd -D -f /etc/lighttpd/lighttpd.conf
  598 ?        Ss     0:00 /usr/bin/php-cgi
  855 ?        Ssl    0:04 /usr/bin/node /opt/Web_Proxy/proxy.js 8080 2222
  856 ?        Ssl   17:59 /usr/bin/ircddbgatewayd -logdir:/var/log/ircddbgateway
  857 ?        Ssl   10:37 /opt/P25Gateway/P25Gateway /opt/P25Gateway/P25Gateway.ini
  858 ?        Ss     0:00 /opt/Quantar_Bridge/Quantar_Bridge /opt/Quantar_Bridge/Quantar_Bridge.ini
  859 ?        Ss     7:58 /opt/P25Parrot/P25Parrot 42011
  861 ?        Ss     7:56 /opt/NXDNParrot/NXDNParrot 42021
  864 ?        Ssl   10:50 /opt/NXDNGateway/NXDNGateway /opt/NXDNGateway/NXDNGateway.ini
  865 ?        Ss     7:58 /opt/YSFParrot/YSFParrot 42012
  866 ?        Ss    11:46 /opt/YSFGateway/YSFGateway /opt/YSFGateway/YSFGateway.ini
 2220 ?        I      0:00 [kworker/4:2-events]
 4623 ?        Ss     0:00 sshd: root@pts/0
 4681 ?        Ss     0:00 sshd: root@notty
 4684 ?        Ss     0:00 /lib/systemd/systemd --user
 4685 ?        S      0:00 (sd-pam)
 4698 pts/0    Ss+    0:00 -bash
 4707 ?        Ss     0:00 /usr/lib/openssh/sftp-server
 5368 tty1     Ss+    0:00 /sbin/agetty -o -p -- \u --noclear tty1 linux
 9176 ?        I      0:00 [kworker/7:1-cgroup_destroy]
11571 ?        I      0:01 [kworker/7:2-events]
12134 ?        S      0:10 /usr/bin/php-cgi
13103 ?        I      0:01 [kworker/u16:0-events_unbound]
16322 ?        Rs     0:00 sshd: root@pts/1
16324 ?        Ss     0:00 sshd: root@notty
16396 pts/1    Ss     0:00 -bash
16397 ?        I      0:00 [kworker/u16:1-events_unbound]
16406 ?        Ss     0:00 /usr/lib/openssh/sftp-server
18741 ?        Ssl   22:38 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini
21092 ?        I      0:00 [kworker/3:0-events]
21559 ?        I      0:00 [kworker/5:1-cgroup_destroy]
24554 ?        I      0:00 [kworker/4:1-mm_percpu_wq]
25234 ?        I      0:01 [kworker/2:1-events]
26404 ?        S      0:10 /usr/bin/php-cgi
26642 ?        S      0:12 /usr/bin/php-cgi
26665 ?        S      0:10 /usr/bin/php-cgi
27366 ?        I      0:00 [kworker/4:0-events]
27545 ?        I      0:00 [kworker/6:2-cgroup_destroy]
28362 ?        I      0:00 [kworker/2:2-events]
28370 ?        I      0:00 [kworker/0:1-cgroup_destroy]
28887 ?        I      0:00 [kworker/3:1-cgroup_destroy]
28888 ?        I      0:00 [kworker/1:2-cgroup_destroy]
29863 ?        Zs     0:00 [cpu-temp] <defunct>
29864 ?        Zs     0:00 [dvswitch.sh] <defunct>
29865 ?        Zs     0:00 [dvswitch.sh] <defunct>
31447 ?        I      0:03 [kworker/1:0-events]
32483 pts/1    R+     0:00 ps ax


73
Scott,
N4UPC



On 1/4/2021 7:50 AM, Steve N4IRS wrote:
Scott,
So first we need to understand which vocoder you are using. Please post the startup output of Analog_Bridge.
The logs are in /var/log/dvswitch. If possible, I would prefer you capture the console output:
As root:
stop Analog_Bridge service
start Analog_Bridge in the foreground and capture the output.
also, please post the result of ps ax
 
Thanks, Steve

On 1/4/2021 8:06 AM, N4UPC - Scott via groups.io wrote:
Sorry. I was speaking of DMR only. I’ve been getting a lot of very digitized voices.

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 05:13, Corey Dean N3FE <n3fe@...> wrote:
In what way?  That is a pretty open question.  Between modes? Between the switch and your cell phone?  We need a little bit more info.


On Jan 3, 2021, at 11:15 PM, N4UPC - Scott via groups.io <n4upc@...> wrote:

Is it possible to ‘tune’ DVSwitch for better voice quality?
























Re: Tuning

Corey Dean N3FE
 

We are no longer issuing talkgroups in the US.  We would have ran out a long time ago.  People are to use their dmr I’d as a group call or a repeater of.

Sorry but that is how it has to be.

Corey n3fe


On Jan 4, 2021, at 5:45 PM, N4UPC - Scott via groups.io <n4upc@...> wrote:


Hey Corey, I’m currently using my ID as a TG for a busy area. At what point should I request an actual TG number?

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 16:40, Corey Dean N3FE <n3fe@...> wrote:
Thank you!  Only 882 more shelf devices left to get the password changed!


On Jan 4, 2021, at 3:13 PM, N4UPC - Scott via groups.io <n4upc@...> wrote:


05 now fixed. Thanks!

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 12:55, Corey Dean N3FE <n3fe@...> wrote:
I am looking At the master logs, you have been receiving 91 well before you make it a static talkgroup on your device ending in 20.

Second please update your device ending in 05.  It is sending the wrong password to bm.

Corey n3fe

Sorry for the use of the bandwidth.  I just figured I would catch him while I could





On Jan 4, 2021, at 11:02 AM, N4UPC - Scott via groups.io <n4upc@...> wrote:


When I set a static TG in self care, it started working.

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 09:58, Steve N4IRS <szingman@...> wrote:
Yes, it's logged into 3102. Are you in DMR mode? I suggest you do a mode command and then a tune.

On 1/4/2021 10:50 AM, N4UPC - Scott via groups.io wrote:
M: 2021-01-04 15:32:04.534 DMR, Remote CMD: txTg=93
M: 2021-01-04 15:32:04.534 DMR, Tune: id=316235620, tg=93, mode=Group
M: 2021-01-04 15:32:04.549 DMR, Remote CMD: info
M: 2021-01-04 15:38:35.269 DMR, Remote CMD: txTg=3162356
M: 2021-01-04 15:38:35.269 DMR, Tune: id=316235620, tg=3162356, mode=Group
M: 2021-01-04 15:38:35.290 DMR, Remote CMD: info



73
Scott,
N4UPC



On 1/4/2021 9:43 AM, Steve N4IRS wrote:
What is in your MMDVM_Bridge log when you tune?

On 1/4/2021 10:42 AM, N4UPC - Scott via groups.io wrote:
I’m using the dvswitch.sh script to ‘tune’ the talkgroup number.

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 09:35, Steve N4IRS <szingman@...> wrote:
They should not be.
<https://brandmeister.network/?page=lh&jsonquery=%7B%22condition%22%3A%22OR%22%2C%22rules%22%3A%5B%7B%22id%22%3A%22DestinationID%22%2C%22field%22%3A%22DestinationID%22%2C%22type%22%3A%22integer%22%2C%22input%22%3A%22text%22%2C%22operator%22%3A%22equal%22%2C%22value%22%3A%2291%22%7D%2C%7B%22id%22%3A%22DestinationID%22%2C%22field%22%3A%22DestinationID%22%2C%22type%22%3A%22integer%22%2C%22input%22%3A%22text%22%2C%22operator%22%3A%22equal%22%2C%22value%22%3A%2293%22%7D%5D%7D>

On 1/4/2021 10:23 AM, N4UPC - Scott via groups.io wrote:
Maybe the few samples I’ve had aren’t a good test. 91 & 93 are dead!

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 09:17, Steve N4IRS <szingman@...> wrote:
I don't know what to tell you. You are using the hardware vocoder, that's the best you can get. Maybe someone else can pop in and tell us what they think of the audio. I have no issues with it.

Steve

On 1/4/2021 10:12 AM, N4UPC - Scott via groups.io wrote:
I was listening on the dashboard and yes, I was comparing it to a radio.

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 08:52, Steve N4IRS <szingman@...> wrote:
OK, everything looks good and your hardware vocoder is being used. Are you listening on AllStar or the RX Monitor. Are you comparing against a DMR radio?

Steve

On 1/4/2021 9:42 AM, N4UPC - Scott via groups.io wrote:
./Analog_Bridge Analog_Bridge.ini
I: 2021-01-04 14:39:43.166 Analog_Bridge Version 1.6.0 Tue Oct 27 06:22:29 EDT 2020
I: 2021-01-04 14:39:43.166 Copyright (C) 2018, 2019, 2020 DVSwitch, INAD.
I: 2021-01-04 14:39:43.166 Created by Mike N4IRR and Steve N4IRS
I: 2021-01-04 14:39:43.166 Analog_Bridge comes with ABSOLUTELY NO WARRANTY
I: 2021-01-04 14:39:43.166
I: 2021-01-04 14:39:43.166 This software is for use on amateur radio networks only,
I: 2021-01-04 14:39:43.166 it is to be used for educational purposes only. Its use on
I: 2021-01-04 14:39:43.166 commercial networks is strictly prohibited.
I: 2021-01-04 14:39:43.166
I: 2021-01-04 14:39:43.166 Analog_Bridge is starting
M: 2021-01-04 14:39:43.168 Setting [MACROS] var AB_DIR -> /var/lib/dvswitch
M: 2021-01-04 14:39:43.169 Setting [MACROS] var MMDVM_DIR -> /var/lib/mmdvm
M: 2021-01-04 14:39:43.170 Setting [MACROS] var NODE_DIR -> /tmp
M: 2021-01-04 14:39:43.171 Setting [MACROS] var DVS_DIR -> /usr/local/dvs
M: 2021-01-04 14:39:43.172 Setting [MACROS] var DVSWITCH -> /opt/MMDVM_Bridge/dvswitch.sh
M: 2021-01-04 14:39:43.173 Setting [MACROS] var DVSM -> ./dvsm.sh
M: 2021-01-04 14:39:43.174 Setting [MACROS] var MACRO -> ${DVSWITCH} macro
M: 2021-01-04 14:39:43.175 Setting [MACROS] var MESSAGE -> ${DVSWITCH} message
M: 2021-01-04 14:39:43.175 Setting [MACROS] OnRegister -> ${DVSWITCH} menu adv_main.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] DMR -> ${DVSM} dmr
M: 2021-01-04 14:39:43.175 Setting [MACROS] DSTAR -> ${DVSM} dstar
M: 2021-01-04 14:39:43.175 Setting [MACROS] NXDN -> ${DVSM} nxdn
M: 2021-01-04 14:39:43.175 Setting [MACROS] P25 -> ${DVSM} p25
M: 2021-01-04 14:39:43.175 Setting [MACROS] YSF -> ${DVSM} ysf
M: 2021-01-04 14:39:43.175 Setting [MACROS] 0 -> ${MACRO} adv_main.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] mainmenu -> ${MACRO} adv_main.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] audio -> ${MACRO} adv_audio.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] dmr -> ${MACRO} adv_dmr.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] temp -> ${MACRO} adv_temp.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] sys -> ${MACRO} adv_sys.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] txgain -> ${DVSM} tx_gain
M: 2021-01-04 14:39:43.175 Setting [MACROS] rxgain -> ${DVSM} rx_gain
M: 2021-01-04 14:39:43.175 Setting [MACROS] hotspot -> ${MACRO} adv_hotspot.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] tgref -> ${MACRO} adv_tgref.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] tools -> ${MACRO} adv_tools.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] push_tg_ref -> ${DVSM} push_tg_ref
M: 2021-01-04 14:39:43.175 Setting [MACROS] resetfvrt -> ${MACRO} adv_resetfvrt.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] resetyes -> ${DVSM} reset_fvrt_db
M: 2021-01-04 14:39:43.175 Setting [MACROS] managetg -> ${MACRO} adv_managetg.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] ver -> ${MESSAGE} "$(${DVSWITCH} version)"
M: 2021-01-04 14:39:43.175 Setting [MACROS] ver_ab -> ${MESSAGE} "AB Version   $(${DVSWITCH} version A           B)"
M: 2021-01-04 14:39:43.175 Setting [MACROS] temp -> sudo ${DVS_DIR}/temp.sh
M: 2021-01-04 14:39:43.175 Setting [MACROS] temp_on -> sudo ${DVS_DIR}/temp_msg.sh -y
M: 2021-01-04 14:39:43.175 Setting [MACROS] temp_off -> sudo ${DVS_DIR}/temp_msg.sh -n
M: 2021-01-04 14:39:43.175 Setting [MACROS] extra_1 -> ${MACRO} extra_1.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] extra_2 -> ${MACRO} extra_2.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] extra_3 -> ${MACRO} extra_3.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] extra_4 -> ${MACRO} extra_4.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] extra_5 -> ${MACRO} extra_5.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] 44 -> ${DVSM} drop_dynamic_tg
M: 2021-01-04 14:39:43.176 Setting [MACROS] 11 -> ${DVSM} hotspot_1
M: 2021-01-04 14:39:43.176 Setting [MACROS] 12 -> ${DVSM} hotspot_2
M: 2021-01-04 14:39:43.176 Setting [MACROS] 13 -> ${DVSM} hotspot_3
M: 2021-01-04 14:39:43.176 Setting [MACROS] 77 -> ${DVSM} cpu_doc
M: 2021-01-04 14:39:43.176 Setting [MACROS] 88 -> ${DVSM} restart
M: 2021-01-04 14:39:43.176 Setting [MACROS] 99 -> ${DVSM} reboot
M: 2021-01-04 14:39:43.176 Setting [MACROS] 00 -> sudo shutdown -h now
M: 2021-01-04 14:39:43.176 Setting [MACROS] update -> ${DVSWITCH} update;${DVSWITCH} reloadDatabase
M: 2021-01-04 14:39:43.176 Setting [MACROS] dbupdate -> ${DVSWITCH} collectProcessPushDataFiles
M: 2021-01-04 14:39:43.176 Setting [MACROS] bm -> ${DVSM} bm
M: 2021-01-04 14:39:43.176 Setting [MACROS] tgif -> ${DVSM} tgif
M: 2021-01-04 14:39:43.176 Setting [MACROS] dmrplus -> ${DVSM} dmrplus
M: 2021-01-04 14:39:43.176 Setting [MACROS] other1 -> ${DVSM} other1
M: 2021-01-04 14:39:43.176 Setting [MACROS] other2 -> ${DVSM} other2
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_p_0.20 -> ${DVSM} tx_p_0.20
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_p_0.15 -> ${DVSM} tx_p_0.15
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_p_0.10 -> ${DVSM} tx_p_0.10
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_p_0.05 -> ${DVSM} tx_p_0.05
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_c_0.00 -> ${DVSM} tx_c_0.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_m_0.05 -> ${DVSM} tx_m_0.05
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_m_0.10 -> ${DVSM} tx_m_0.10
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_m_0.15 -> ${DVSM} tx_m_0.15
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_m_0.20 -> ${DVSM} tx_m_0.20
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_0.00 -> ${DVSM} rx_0.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_1.00 -> ${DVSM} rx_1.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_2.00 -> ${DVSM} rx_2.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_3.00 -> ${DVSM} rx_3.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_4.00 -> ${DVSM} rx_4.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_5.00 -> ${DVSM} rx_5.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_6.00 -> ${DVSM} rx_6.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_7.00 -> ${DVSM} rx_7.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_8.00 -> ${DVSM} rx_8.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_9.00 -> ${DVSM} rx_9.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_10.0 -> ${DVSM} rx_10.0
M: 2021-01-04 14:39:43.176 Setting [MACROS] DD -> ${DVSM} del_fvrt
M: 2021-01-04 14:39:43.176 Setting [MACROS] AA -> ${DVSM} add_fvrt 0
M: 2021-01-04 14:39:43.176 Setting [MACROS] A1 -> ${DVSM} add_fvrt 2
M: 2021-01-04 14:39:43.176 Setting [MACROS] A2 -> ${DVSM} add_fvrt 3
M: 2021-01-04 14:39:43.176 Setting [MACROS] A3 -> ${DVSM} add_fvrt 4
M: 2021-01-04 14:39:43.176 Setting [MACROS] A4 -> ${DVSM} add_fvrt 5
M: 2021-01-04 14:39:43.176 Setting [MACROS] A5 -> ${DVSM} add_fvrt 6
M: 2021-01-04 14:39:43.176 Setting [MACROS] A6 -> ${DVSM} add_fvrt 7
M: 2021-01-04 14:39:43.176 Setting [MACROS] A7 -> ${DVSM} add_fvrt 8
M: 2021-01-04 14:39:43.176 Setting [MACROS] A8 -> ${DVSM} add_fvrt 9
M: 2021-01-04 14:39:43.176 Setting [MACROS] A9 -> ${DVSM} add_fvrt 10
M: 2021-01-04 14:39:43.176 Setting [] include -> dvsm.macro
M: 2021-01-04 14:39:43.176 Setting [GENERAL] logLevel -> 2
M: 2021-01-04 14:39:43.176 Setting [GENERAL] exportMetadata -> true
M: 2021-01-04 14:39:43.176 Setting [GENERAL] transferRootDir -> /tmp
M: 2021-01-04 14:39:43.176 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2021-01-04 14:39:43.176 Setting [GENERAL] decoderFallBack -> true
M: 2021-01-04 14:39:43.176 Setting [GENERAL] useEmulator -> true
M: 2021-01-04 14:39:43.176 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2021-01-04 14:39:43.176 Setting [GENERAL] pcmPort -> 2222
M: 2021-01-04 14:39:43.176 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] txPort -> 31103
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] minTxTimeMS -> 2500
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] gatewayDmrId -> 3162356
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] repeaterID -> 316235620
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] txTg -> 3162356
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] txTs -> 2
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] colorCode -> 1
M: 2021-01-04 14:39:43.177 Setting [USRP] address -> 192.168.1.230
M: 2021-01-04 14:39:43.177 Setting [USRP] txPort -> 32001
M: 2021-01-04 14:39:43.177 Setting [USRP] rxPort -> 34001
M: 2021-01-04 14:39:43.177 Setting [USRP] usrpAudio -> AUDIO_USE_GAIN
M: 2021-01-04 14:39:43.177 Setting [USRP] usrpGain -> 4.00
M: 2021-01-04 14:39:43.177 Setting [USRP] usrpAGC -> -20,10,100
M: 2021-01-04 14:39:43.177 Setting [USRP] tlvAudio -> AUDIO_USE_GAIN
M: 2021-01-04 14:39:43.177 Setting [USRP] tlvGain -> 0.25
M: 2021-01-04 14:39:43.177 Setting [DV3000] address -> /dev/ttyUSB0
M: 2021-01-04 14:39:43.177 Setting [DV3000] baud -> 460800
M: 2021-01-04 14:39:43.177 Setting [DV3000] serial -> true
I: 2021-01-04 14:39:43.177 Open UDP listener on 127.0.0.1:31100
I: 2021-01-04 14:39:43.177 Open USRP on 192.168.1.230:32001
M: 2021-01-04 14:39:43.177 Connecting to DV3000 hardware......
M: 2021-01-04 14:39:43.249 Begin DV3000 decode
M: 2021-01-04 14:39:43.249 DV3000U latency is currently set to 1
Project 25 IMBE Encoder/Decoder Fixed-Point implementation
Developed by Pavel Yazev E-mail: pyazev@...
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions; see the file ``LICENSE'' for details.
I: 2021-01-04 14:39:43.439 Subscriber IDs loaded: 182602
I: 2021-01-04 14:39:43.439 Default extended metadata <N4UPC>
I: 2021-01-04 14:39:43.439 Connecting to emulator on host 127.0.0.1:2470
I: 2021-01-04 14:39:43.439 Using hardware AMBE vocoder
I: 2021-01-04 14:39:43.439 Sending to USRP clients at 192.168.1.230 on port(s) 32001
I: 2021-01-04 14:39:43.439 Sending PCM to  clients at 127.0.0.1 on port 2222
I: 2021-01-04 14:39:43.439 Starting TLV --> Analog_Bridge (decoder) --> USRP thread
I: 2021-01-04 14:39:43.439 Starting USRP --> Analog_Bridge (encoder) -> TLV thread



ps ax
  PID TTY      STAT   TIME COMMAND
    1 ?        Ss     0:02 /sbin/init
    2 ?        S      0:00 [kthreadd]
    3 ?        I<     0:00 [rcu_gp]
    4 ?        I<     0:00 [rcu_par_gp]
    6 ?        I<     0:00 [kworker/0:0H-kblockd]
    8 ?        I<     0:00 [mm_percpu_wq]
    9 ?        S      0:00 [ksoftirqd/0]
   10 ?        I      0:46 [rcu_sched]
   11 ?        I      0:00 [rcu_bh]
   12 ?        S      0:00 [migration/0]
   14 ?        S      0:00 [cpuhp/0]
   15 ?        S      0:00 [cpuhp/1]
   16 ?        S      0:01 [migration/1]
   17 ?        S      0:00 [ksoftirqd/1]
   19 ?        I<     0:00 [kworker/1:0H-kblockd]
   20 ?        S      0:00 [cpuhp/2]
   21 ?        S      0:00 [migration/2]
   22 ?        S      0:00 [ksoftirqd/2]
   24 ?        I<     0:00 [kworker/2:0H-kblockd]
   25 ?        S      0:00 [cpuhp/3]
   26 ?        S      0:01 [migration/3]
   27 ?        S      0:00 [ksoftirqd/3]
   29 ?        I<     0:00 [kworker/3:0H-kblockd]
   30 ?        S      0:00 [cpuhp/4]
   31 ?        S      0:00 [migration/4]
   32 ?        S      0:00 [ksoftirqd/4]
   34 ?        I<     0:00 [kworker/4:0H-kblockd]
   35 ?        S      0:00 [cpuhp/5]
   36 ?        S      0:01 [migration/5]
   37 ?        S      0:00 [ksoftirqd/5]
   39 ?        I<     0:00 [kworker/5:0H-kblockd]
   40 ?        S      0:00 [cpuhp/6]
   41 ?        S      0:01 [migration/6]
   42 ?        S      0:00 [ksoftirqd/6]
   44 ?        I<     0:00 [kworker/6:0H-kblockd]
   45 ?        S      0:00 [cpuhp/7]
   46 ?        S      0:01 [migration/7]
   47 ?        S      0:00 [ksoftirqd/7]
   49 ?        I<     0:00 [kworker/7:0H-kblockd]
   50 ?        S      0:00 [kdevtmpfs]
   51 ?        I<     0:00 [netns]
   52 ?        S      0:00 [kauditd]
   53 ?        S      0:00 [khungtaskd]
   54 ?        S      0:00 [oom_reaper]
   55 ?        I<     0:00 [writeback]
   56 ?        S      0:00 [kcompactd0]
   57 ?        SN     0:00 [ksmd]
   58 ?        SN     0:00 [khugepaged]
   59 ?        I<     0:00 [crypto]
   60 ?        I<     0:00 [kintegrityd]
   61 ?        I<     0:00 [kblockd]
   62 ?        I<     0:00 [edac-poller]
   63 ?        I<     0:00 [devfreq_wq]
   64 ?        S      0:00 [watchdogd]
   65 ?        S      0:00 [kswapd0]
   84 ?        I<     0:00 [kthrotld]
   85 ?        I<     0:00 [ipv6_addrconf]
   96 ?        I<     0:00 [kstrp]
  142 ?        I<     0:00 [acpi_thermal_pm]
  203 ?        I      0:05 [kworker/6:1-events]
  204 ?        I<     0:00 [ata_sff]
  210 ?        S      0:00 [scsi_eh_0]
  211 ?        I<     0:00 [scsi_tmf_0]
  212 ?        S      0:00 [scsi_eh_1]
  213 ?        I<     0:00 [scsi_tmf_1]
  214 ?        S      0:00 [scsi_eh_2]
  215 ?        I<     0:00 [scsi_tmf_2]
  216 ?        S      0:00 [scsi_eh_3]
  218 ?        I<     0:00 [scsi_tmf_3]
  219 ?        S      0:00 [scsi_eh_4]
  220 ?        I<     0:00 [scsi_tmf_4]
  221 ?        S      0:00 [scsi_eh_5]
  222 ?        I<     0:00 [scsi_tmf_5]
  227 ?        I      0:01 [kworker/u16:5-events_unbound]
  255 ?        I      0:05 [kworker/5:2-events]
  257 ?        I<     0:00 [kworker/1:1H-kblockd]
  272 ?        I<     0:00 [kworker/3:1H-kblockd]
  285 ?        I<     0:00 [kworker/2:1H-kblockd]
  288 ?        I<     0:00 [kworker/u17:0]
  290 ?        I<     0:00 [kworker/5:1H-kblockd]
  291 ?        S      0:03 [jbd2/sda1-8]
  292 ?        I<     0:00 [ext4-rsv-conver]
  296 ?        I<     0:00 [kworker/4:1H-kblockd]
  300 ?        I<     0:00 [kworker/6:1H-kblockd]
  302 ?        I<     0:00 [kworker/0:1H-kblockd]
  306 ?        I<     0:00 [kworker/7:1H-kblockd]
  326 ?        Ss     0:00 /lib/systemd/systemd-journald
  345 ?        Ss     0:00 /lib/systemd/systemd-udevd
  350 ?        Ss     0:00 /lib/systemd/systemd-networkd
  432 ?        S      0:00 [irq/35-mei_me]
  468 ?        Ss     0:00 /sbin/dhclient -4 -v -i -pf /run/dhclient.enp3s0.pid -lf /var/lib/dhcp/dhclient.enp3s0
  478 ?        I      0:06 [kworker/0:3-events]
  484 ?        Ssl    0:00 /lib/systemd/systemd-timesyncd
  491 ?        Ss     0:00 /usr/sbin/cron -f
  493 ?        Ss     0:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activa
  497 ?        Ss     0:00 /lib/systemd/systemd-logind
  498 ?        Ssl    0:00 /usr/sbin/rsyslogd -n -iNONE
  504 ?        Ssl    0:00 /usr/bin/qemu-arm-static /opt/md380-emu/md380-emu -S 2470
  508 ?        Ss     0:00 /usr/sbin/sshd -D
  510 ?        Sl     0:19 /usr/bin/monit -c /etc/monit/monitrc
  569 ?        Ss     1:37 /usr/sbin/lighttpd -D -f /etc/lighttpd/lighttpd.conf
  598 ?        Ss     0:00 /usr/bin/php-cgi
  855 ?        Ssl    0:04 /usr/bin/node /opt/Web_Proxy/proxy.js 8080 2222
  856 ?        Ssl   17:59 /usr/bin/ircddbgatewayd -logdir:/var/log/ircddbgateway
  857 ?        Ssl   10:37 /opt/P25Gateway/P25Gateway /opt/P25Gateway/P25Gateway.ini
  858 ?        Ss     0:00 /opt/Quantar_Bridge/Quantar_Bridge /opt/Quantar_Bridge/Quantar_Bridge.ini
  859 ?        Ss     7:58 /opt/P25Parrot/P25Parrot 42011
  861 ?        Ss     7:56 /opt/NXDNParrot/NXDNParrot 42021
  864 ?        Ssl   10:50 /opt/NXDNGateway/NXDNGateway /opt/NXDNGateway/NXDNGateway.ini
  865 ?        Ss     7:58 /opt/YSFParrot/YSFParrot 42012
  866 ?        Ss    11:46 /opt/YSFGateway/YSFGateway /opt/YSFGateway/YSFGateway.ini
 2220 ?        I      0:00 [kworker/4:2-events]
 4623 ?        Ss     0:00 sshd: root@pts/0
 4681 ?        Ss     0:00 sshd: root@notty
 4684 ?        Ss     0:00 /lib/systemd/systemd --user
 4685 ?        S      0:00 (sd-pam)
 4698 pts/0    Ss+    0:00 -bash
 4707 ?        Ss     0:00 /usr/lib/openssh/sftp-server
 5368 tty1     Ss+    0:00 /sbin/agetty -o -p -- \u --noclear tty1 linux
 9176 ?        I      0:00 [kworker/7:1-cgroup_destroy]
11571 ?        I      0:01 [kworker/7:2-events]
12134 ?        S      0:10 /usr/bin/php-cgi
13103 ?        I      0:01 [kworker/u16:0-events_unbound]
16322 ?        Rs     0:00 sshd: root@pts/1
16324 ?        Ss     0:00 sshd: root@notty
16396 pts/1    Ss     0:00 -bash
16397 ?        I      0:00 [kworker/u16:1-events_unbound]
16406 ?        Ss     0:00 /usr/lib/openssh/sftp-server
18741 ?        Ssl   22:38 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini
21092 ?        I      0:00 [kworker/3:0-events]
21559 ?        I      0:00 [kworker/5:1-cgroup_destroy]
24554 ?        I      0:00 [kworker/4:1-mm_percpu_wq]
25234 ?        I      0:01 [kworker/2:1-events]
26404 ?        S      0:10 /usr/bin/php-cgi
26642 ?        S      0:12 /usr/bin/php-cgi
26665 ?        S      0:10 /usr/bin/php-cgi
27366 ?        I      0:00 [kworker/4:0-events]
27545 ?        I      0:00 [kworker/6:2-cgroup_destroy]
28362 ?        I      0:00 [kworker/2:2-events]
28370 ?        I      0:00 [kworker/0:1-cgroup_destroy]
28887 ?        I      0:00 [kworker/3:1-cgroup_destroy]
28888 ?        I      0:00 [kworker/1:2-cgroup_destroy]
29863 ?        Zs     0:00 [cpu-temp] <defunct>
29864 ?        Zs     0:00 [dvswitch.sh] <defunct>
29865 ?        Zs     0:00 [dvswitch.sh] <defunct>
31447 ?        I      0:03 [kworker/1:0-events]
32483 pts/1    R+     0:00 ps ax


73
Scott,
N4UPC



On 1/4/2021 7:50 AM, Steve N4IRS wrote:
Scott,
So first we need to understand which vocoder you are using. Please post the startup output of Analog_Bridge.
The logs are in /var/log/dvswitch. If possible, I would prefer you capture the console output:
As root:
stop Analog_Bridge service
start Analog_Bridge in the foreground and capture the output.
also, please post the result of ps ax
 
Thanks, Steve

On 1/4/2021 8:06 AM, N4UPC - Scott via groups.io wrote:
Sorry. I was speaking of DMR only. I’ve been getting a lot of very digitized voices.

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 05:13, Corey Dean N3FE <n3fe@...> wrote:
In what way?  That is a pretty open question.  Between modes? Between the switch and your cell phone?  We need a little bit more info.


On Jan 3, 2021, at 11:15 PM, N4UPC - Scott via groups.io <n4upc@...> wrote:

Is it possible to ‘tune’ DVSwitch for better voice quality?






















Re: Tuning

N4UPC - Scott
 

Hey Corey, I’m currently using my ID as a TG for a busy area. At what point should I request an actual TG number?

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 16:40, Corey Dean N3FE <n3fe@...> wrote:
Thank you!  Only 882 more shelf devices left to get the password changed!


On Jan 4, 2021, at 3:13 PM, N4UPC - Scott via groups.io <n4upc@...> wrote:


05 now fixed. Thanks!

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 12:55, Corey Dean N3FE <n3fe@...> wrote:
I am looking At the master logs, you have been receiving 91 well before you make it a static talkgroup on your device ending in 20.

Second please update your device ending in 05.  It is sending the wrong password to bm.

Corey n3fe

Sorry for the use of the bandwidth.  I just figured I would catch him while I could





On Jan 4, 2021, at 11:02 AM, N4UPC - Scott via groups.io <n4upc@...> wrote:


When I set a static TG in self care, it started working.

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 09:58, Steve N4IRS <szingman@...> wrote:
Yes, it's logged into 3102. Are you in DMR mode? I suggest you do a mode command and then a tune.

On 1/4/2021 10:50 AM, N4UPC - Scott via groups.io wrote:
M: 2021-01-04 15:32:04.534 DMR, Remote CMD: txTg=93
M: 2021-01-04 15:32:04.534 DMR, Tune: id=316235620, tg=93, mode=Group
M: 2021-01-04 15:32:04.549 DMR, Remote CMD: info
M: 2021-01-04 15:38:35.269 DMR, Remote CMD: txTg=3162356
M: 2021-01-04 15:38:35.269 DMR, Tune: id=316235620, tg=3162356, mode=Group
M: 2021-01-04 15:38:35.290 DMR, Remote CMD: info



73
Scott,
N4UPC



On 1/4/2021 9:43 AM, Steve N4IRS wrote:
What is in your MMDVM_Bridge log when you tune?

On 1/4/2021 10:42 AM, N4UPC - Scott via groups.io wrote:
I’m using the dvswitch.sh script to ‘tune’ the talkgroup number.

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 09:35, Steve N4IRS <szingman@...> wrote:
They should not be.
<https://brandmeister.network/?page=lh&jsonquery=%7B%22condition%22%3A%22OR%22%2C%22rules%22%3A%5B%7B%22id%22%3A%22DestinationID%22%2C%22field%22%3A%22DestinationID%22%2C%22type%22%3A%22integer%22%2C%22input%22%3A%22text%22%2C%22operator%22%3A%22equal%22%2C%22value%22%3A%2291%22%7D%2C%7B%22id%22%3A%22DestinationID%22%2C%22field%22%3A%22DestinationID%22%2C%22type%22%3A%22integer%22%2C%22input%22%3A%22text%22%2C%22operator%22%3A%22equal%22%2C%22value%22%3A%2293%22%7D%5D%7D>

On 1/4/2021 10:23 AM, N4UPC - Scott via groups.io wrote:
Maybe the few samples I’ve had aren’t a good test. 91 & 93 are dead!

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 09:17, Steve N4IRS <szingman@...> wrote:
I don't know what to tell you. You are using the hardware vocoder, that's the best you can get. Maybe someone else can pop in and tell us what they think of the audio. I have no issues with it.

Steve

On 1/4/2021 10:12 AM, N4UPC - Scott via groups.io wrote:
I was listening on the dashboard and yes, I was comparing it to a radio.

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 08:52, Steve N4IRS <szingman@...> wrote:
OK, everything looks good and your hardware vocoder is being used. Are you listening on AllStar or the RX Monitor. Are you comparing against a DMR radio?

Steve

On 1/4/2021 9:42 AM, N4UPC - Scott via groups.io wrote:
./Analog_Bridge Analog_Bridge.ini
I: 2021-01-04 14:39:43.166 Analog_Bridge Version 1.6.0 Tue Oct 27 06:22:29 EDT 2020
I: 2021-01-04 14:39:43.166 Copyright (C) 2018, 2019, 2020 DVSwitch, INAD.
I: 2021-01-04 14:39:43.166 Created by Mike N4IRR and Steve N4IRS
I: 2021-01-04 14:39:43.166 Analog_Bridge comes with ABSOLUTELY NO WARRANTY
I: 2021-01-04 14:39:43.166
I: 2021-01-04 14:39:43.166 This software is for use on amateur radio networks only,
I: 2021-01-04 14:39:43.166 it is to be used for educational purposes only. Its use on
I: 2021-01-04 14:39:43.166 commercial networks is strictly prohibited.
I: 2021-01-04 14:39:43.166
I: 2021-01-04 14:39:43.166 Analog_Bridge is starting
M: 2021-01-04 14:39:43.168 Setting [MACROS] var AB_DIR -> /var/lib/dvswitch
M: 2021-01-04 14:39:43.169 Setting [MACROS] var MMDVM_DIR -> /var/lib/mmdvm
M: 2021-01-04 14:39:43.170 Setting [MACROS] var NODE_DIR -> /tmp
M: 2021-01-04 14:39:43.171 Setting [MACROS] var DVS_DIR -> /usr/local/dvs
M: 2021-01-04 14:39:43.172 Setting [MACROS] var DVSWITCH -> /opt/MMDVM_Bridge/dvswitch.sh
M: 2021-01-04 14:39:43.173 Setting [MACROS] var DVSM -> ./dvsm.sh
M: 2021-01-04 14:39:43.174 Setting [MACROS] var MACRO -> ${DVSWITCH} macro
M: 2021-01-04 14:39:43.175 Setting [MACROS] var MESSAGE -> ${DVSWITCH} message
M: 2021-01-04 14:39:43.175 Setting [MACROS] OnRegister -> ${DVSWITCH} menu adv_main.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] DMR -> ${DVSM} dmr
M: 2021-01-04 14:39:43.175 Setting [MACROS] DSTAR -> ${DVSM} dstar
M: 2021-01-04 14:39:43.175 Setting [MACROS] NXDN -> ${DVSM} nxdn
M: 2021-01-04 14:39:43.175 Setting [MACROS] P25 -> ${DVSM} p25
M: 2021-01-04 14:39:43.175 Setting [MACROS] YSF -> ${DVSM} ysf
M: 2021-01-04 14:39:43.175 Setting [MACROS] 0 -> ${MACRO} adv_main.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] mainmenu -> ${MACRO} adv_main.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] audio -> ${MACRO} adv_audio.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] dmr -> ${MACRO} adv_dmr.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] temp -> ${MACRO} adv_temp.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] sys -> ${MACRO} adv_sys.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] txgain -> ${DVSM} tx_gain
M: 2021-01-04 14:39:43.175 Setting [MACROS] rxgain -> ${DVSM} rx_gain
M: 2021-01-04 14:39:43.175 Setting [MACROS] hotspot -> ${MACRO} adv_hotspot.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] tgref -> ${MACRO} adv_tgref.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] tools -> ${MACRO} adv_tools.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] push_tg_ref -> ${DVSM} push_tg_ref
M: 2021-01-04 14:39:43.175 Setting [MACROS] resetfvrt -> ${MACRO} adv_resetfvrt.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] resetyes -> ${DVSM} reset_fvrt_db
M: 2021-01-04 14:39:43.175 Setting [MACROS] managetg -> ${MACRO} adv_managetg.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] ver -> ${MESSAGE} "$(${DVSWITCH} version)"
M: 2021-01-04 14:39:43.175 Setting [MACROS] ver_ab -> ${MESSAGE} "AB Version   $(${DVSWITCH} version A           B)"
M: 2021-01-04 14:39:43.175 Setting [MACROS] temp -> sudo ${DVS_DIR}/temp.sh
M: 2021-01-04 14:39:43.175 Setting [MACROS] temp_on -> sudo ${DVS_DIR}/temp_msg.sh -y
M: 2021-01-04 14:39:43.175 Setting [MACROS] temp_off -> sudo ${DVS_DIR}/temp_msg.sh -n
M: 2021-01-04 14:39:43.175 Setting [MACROS] extra_1 -> ${MACRO} extra_1.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] extra_2 -> ${MACRO} extra_2.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] extra_3 -> ${MACRO} extra_3.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] extra_4 -> ${MACRO} extra_4.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] extra_5 -> ${MACRO} extra_5.txt
M: 2021-01-04 14:39:43.175 Setting [MACROS] 44 -> ${DVSM} drop_dynamic_tg
M: 2021-01-04 14:39:43.176 Setting [MACROS] 11 -> ${DVSM} hotspot_1
M: 2021-01-04 14:39:43.176 Setting [MACROS] 12 -> ${DVSM} hotspot_2
M: 2021-01-04 14:39:43.176 Setting [MACROS] 13 -> ${DVSM} hotspot_3
M: 2021-01-04 14:39:43.176 Setting [MACROS] 77 -> ${DVSM} cpu_doc
M: 2021-01-04 14:39:43.176 Setting [MACROS] 88 -> ${DVSM} restart
M: 2021-01-04 14:39:43.176 Setting [MACROS] 99 -> ${DVSM} reboot
M: 2021-01-04 14:39:43.176 Setting [MACROS] 00 -> sudo shutdown -h now
M: 2021-01-04 14:39:43.176 Setting [MACROS] update -> ${DVSWITCH} update;${DVSWITCH} reloadDatabase
M: 2021-01-04 14:39:43.176 Setting [MACROS] dbupdate -> ${DVSWITCH} collectProcessPushDataFiles
M: 2021-01-04 14:39:43.176 Setting [MACROS] bm -> ${DVSM} bm
M: 2021-01-04 14:39:43.176 Setting [MACROS] tgif -> ${DVSM} tgif
M: 2021-01-04 14:39:43.176 Setting [MACROS] dmrplus -> ${DVSM} dmrplus
M: 2021-01-04 14:39:43.176 Setting [MACROS] other1 -> ${DVSM} other1
M: 2021-01-04 14:39:43.176 Setting [MACROS] other2 -> ${DVSM} other2
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_p_0.20 -> ${DVSM} tx_p_0.20
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_p_0.15 -> ${DVSM} tx_p_0.15
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_p_0.10 -> ${DVSM} tx_p_0.10
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_p_0.05 -> ${DVSM} tx_p_0.05
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_c_0.00 -> ${DVSM} tx_c_0.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_m_0.05 -> ${DVSM} tx_m_0.05
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_m_0.10 -> ${DVSM} tx_m_0.10
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_m_0.15 -> ${DVSM} tx_m_0.15
M: 2021-01-04 14:39:43.176 Setting [MACROS] tx_m_0.20 -> ${DVSM} tx_m_0.20
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_0.00 -> ${DVSM} rx_0.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_1.00 -> ${DVSM} rx_1.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_2.00 -> ${DVSM} rx_2.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_3.00 -> ${DVSM} rx_3.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_4.00 -> ${DVSM} rx_4.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_5.00 -> ${DVSM} rx_5.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_6.00 -> ${DVSM} rx_6.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_7.00 -> ${DVSM} rx_7.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_8.00 -> ${DVSM} rx_8.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_9.00 -> ${DVSM} rx_9.00
M: 2021-01-04 14:39:43.176 Setting [MACROS] rx_10.0 -> ${DVSM} rx_10.0
M: 2021-01-04 14:39:43.176 Setting [MACROS] DD -> ${DVSM} del_fvrt
M: 2021-01-04 14:39:43.176 Setting [MACROS] AA -> ${DVSM} add_fvrt 0
M: 2021-01-04 14:39:43.176 Setting [MACROS] A1 -> ${DVSM} add_fvrt 2
M: 2021-01-04 14:39:43.176 Setting [MACROS] A2 -> ${DVSM} add_fvrt 3
M: 2021-01-04 14:39:43.176 Setting [MACROS] A3 -> ${DVSM} add_fvrt 4
M: 2021-01-04 14:39:43.176 Setting [MACROS] A4 -> ${DVSM} add_fvrt 5
M: 2021-01-04 14:39:43.176 Setting [MACROS] A5 -> ${DVSM} add_fvrt 6
M: 2021-01-04 14:39:43.176 Setting [MACROS] A6 -> ${DVSM} add_fvrt 7
M: 2021-01-04 14:39:43.176 Setting [MACROS] A7 -> ${DVSM} add_fvrt 8
M: 2021-01-04 14:39:43.176 Setting [MACROS] A8 -> ${DVSM} add_fvrt 9
M: 2021-01-04 14:39:43.176 Setting [MACROS] A9 -> ${DVSM} add_fvrt 10
M: 2021-01-04 14:39:43.176 Setting [] include -> dvsm.macro
M: 2021-01-04 14:39:43.176 Setting [GENERAL] logLevel -> 2
M: 2021-01-04 14:39:43.176 Setting [GENERAL] exportMetadata -> true
M: 2021-01-04 14:39:43.176 Setting [GENERAL] transferRootDir -> /tmp
M: 2021-01-04 14:39:43.176 Setting [GENERAL] subscriberFile -> /var/lib/dvswitch/subscriber_ids.csv
M: 2021-01-04 14:39:43.176 Setting [GENERAL] decoderFallBack -> true
M: 2021-01-04 14:39:43.176 Setting [GENERAL] useEmulator -> true
M: 2021-01-04 14:39:43.176 Setting [GENERAL] emulatorAddress -> 127.0.0.1:2470
M: 2021-01-04 14:39:43.176 Setting [GENERAL] pcmPort -> 2222
M: 2021-01-04 14:39:43.176 Setting [AMBE_AUDIO] address -> 127.0.0.1
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] txPort -> 31103
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] rxPort -> 31100
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] ambeMode -> DMR
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] minTxTimeMS -> 2500
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] gatewayDmrId -> 3162356
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] repeaterID -> 316235620
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] txTg -> 3162356
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] txTs -> 2
M: 2021-01-04 14:39:43.177 Setting [AMBE_AUDIO] colorCode -> 1
M: 2021-01-04 14:39:43.177 Setting [USRP] address -> 192.168.1.230
M: 2021-01-04 14:39:43.177 Setting [USRP] txPort -> 32001
M: 2021-01-04 14:39:43.177 Setting [USRP] rxPort -> 34001
M: 2021-01-04 14:39:43.177 Setting [USRP] usrpAudio -> AUDIO_USE_GAIN
M: 2021-01-04 14:39:43.177 Setting [USRP] usrpGain -> 4.00
M: 2021-01-04 14:39:43.177 Setting [USRP] usrpAGC -> -20,10,100
M: 2021-01-04 14:39:43.177 Setting [USRP] tlvAudio -> AUDIO_USE_GAIN
M: 2021-01-04 14:39:43.177 Setting [USRP] tlvGain -> 0.25
M: 2021-01-04 14:39:43.177 Setting [DV3000] address -> /dev/ttyUSB0
M: 2021-01-04 14:39:43.177 Setting [DV3000] baud -> 460800
M: 2021-01-04 14:39:43.177 Setting [DV3000] serial -> true
I: 2021-01-04 14:39:43.177 Open UDP listener on 127.0.0.1:31100
I: 2021-01-04 14:39:43.177 Open USRP on 192.168.1.230:32001
M: 2021-01-04 14:39:43.177 Connecting to DV3000 hardware......
M: 2021-01-04 14:39:43.249 Begin DV3000 decode
M: 2021-01-04 14:39:43.249 DV3000U latency is currently set to 1
Project 25 IMBE Encoder/Decoder Fixed-Point implementation
Developed by Pavel Yazev E-mail: pyazev@...
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions; see the file ``LICENSE'' for details.
I: 2021-01-04 14:39:43.439 Subscriber IDs loaded: 182602
I: 2021-01-04 14:39:43.439 Default extended metadata <N4UPC>
I: 2021-01-04 14:39:43.439 Connecting to emulator on host 127.0.0.1:2470
I: 2021-01-04 14:39:43.439 Using hardware AMBE vocoder
I: 2021-01-04 14:39:43.439 Sending to USRP clients at 192.168.1.230 on port(s) 32001
I: 2021-01-04 14:39:43.439 Sending PCM to  clients at 127.0.0.1 on port 2222
I: 2021-01-04 14:39:43.439 Starting TLV --> Analog_Bridge (decoder) --> USRP thread
I: 2021-01-04 14:39:43.439 Starting USRP --> Analog_Bridge (encoder) -> TLV thread



ps ax
  PID TTY      STAT   TIME COMMAND
    1 ?        Ss     0:02 /sbin/init
    2 ?        S      0:00 [kthreadd]
    3 ?        I<     0:00 [rcu_gp]
    4 ?        I<     0:00 [rcu_par_gp]
    6 ?        I<     0:00 [kworker/0:0H-kblockd]
    8 ?        I<     0:00 [mm_percpu_wq]
    9 ?        S      0:00 [ksoftirqd/0]
   10 ?        I      0:46 [rcu_sched]
   11 ?        I      0:00 [rcu_bh]
   12 ?        S      0:00 [migration/0]
   14 ?        S      0:00 [cpuhp/0]
   15 ?        S      0:00 [cpuhp/1]
   16 ?        S      0:01 [migration/1]
   17 ?        S      0:00 [ksoftirqd/1]
   19 ?        I<     0:00 [kworker/1:0H-kblockd]
   20 ?        S      0:00 [cpuhp/2]
   21 ?        S      0:00 [migration/2]
   22 ?        S      0:00 [ksoftirqd/2]
   24 ?        I<     0:00 [kworker/2:0H-kblockd]
   25 ?        S      0:00 [cpuhp/3]
   26 ?        S      0:01 [migration/3]
   27 ?        S      0:00 [ksoftirqd/3]
   29 ?        I<     0:00 [kworker/3:0H-kblockd]
   30 ?        S      0:00 [cpuhp/4]
   31 ?        S      0:00 [migration/4]
   32 ?        S      0:00 [ksoftirqd/4]
   34 ?        I<     0:00 [kworker/4:0H-kblockd]
   35 ?        S      0:00 [cpuhp/5]
   36 ?        S      0:01 [migration/5]
   37 ?        S      0:00 [ksoftirqd/5]
   39 ?        I<     0:00 [kworker/5:0H-kblockd]
   40 ?        S      0:00 [cpuhp/6]
   41 ?        S      0:01 [migration/6]
   42 ?        S      0:00 [ksoftirqd/6]
   44 ?        I<     0:00 [kworker/6:0H-kblockd]
   45 ?        S      0:00 [cpuhp/7]
   46 ?        S      0:01 [migration/7]
   47 ?        S      0:00 [ksoftirqd/7]
   49 ?        I<     0:00 [kworker/7:0H-kblockd]
   50 ?        S      0:00 [kdevtmpfs]
   51 ?        I<     0:00 [netns]
   52 ?        S      0:00 [kauditd]
   53 ?        S      0:00 [khungtaskd]
   54 ?        S      0:00 [oom_reaper]
   55 ?        I<     0:00 [writeback]
   56 ?        S      0:00 [kcompactd0]
   57 ?        SN     0:00 [ksmd]
   58 ?        SN     0:00 [khugepaged]
   59 ?        I<     0:00 [crypto]
   60 ?        I<     0:00 [kintegrityd]
   61 ?        I<     0:00 [kblockd]
   62 ?        I<     0:00 [edac-poller]
   63 ?        I<     0:00 [devfreq_wq]
   64 ?        S      0:00 [watchdogd]
   65 ?        S      0:00 [kswapd0]
   84 ?        I<     0:00 [kthrotld]
   85 ?        I<     0:00 [ipv6_addrconf]
   96 ?        I<     0:00 [kstrp]
  142 ?        I<     0:00 [acpi_thermal_pm]
  203 ?        I      0:05 [kworker/6:1-events]
  204 ?        I<     0:00 [ata_sff]
  210 ?        S      0:00 [scsi_eh_0]
  211 ?        I<     0:00 [scsi_tmf_0]
  212 ?        S      0:00 [scsi_eh_1]
  213 ?        I<     0:00 [scsi_tmf_1]
  214 ?        S      0:00 [scsi_eh_2]
  215 ?        I<     0:00 [scsi_tmf_2]
  216 ?        S      0:00 [scsi_eh_3]
  218 ?        I<     0:00 [scsi_tmf_3]
  219 ?        S      0:00 [scsi_eh_4]
  220 ?        I<     0:00 [scsi_tmf_4]
  221 ?        S      0:00 [scsi_eh_5]
  222 ?        I<     0:00 [scsi_tmf_5]
  227 ?        I      0:01 [kworker/u16:5-events_unbound]
  255 ?        I      0:05 [kworker/5:2-events]
  257 ?        I<     0:00 [kworker/1:1H-kblockd]
  272 ?        I<     0:00 [kworker/3:1H-kblockd]
  285 ?        I<     0:00 [kworker/2:1H-kblockd]
  288 ?        I<     0:00 [kworker/u17:0]
  290 ?        I<     0:00 [kworker/5:1H-kblockd]
  291 ?        S      0:03 [jbd2/sda1-8]
  292 ?        I<     0:00 [ext4-rsv-conver]
  296 ?        I<     0:00 [kworker/4:1H-kblockd]
  300 ?        I<     0:00 [kworker/6:1H-kblockd]
  302 ?        I<     0:00 [kworker/0:1H-kblockd]
  306 ?        I<     0:00 [kworker/7:1H-kblockd]
  326 ?        Ss     0:00 /lib/systemd/systemd-journald
  345 ?        Ss     0:00 /lib/systemd/systemd-udevd
  350 ?        Ss     0:00 /lib/systemd/systemd-networkd
  432 ?        S      0:00 [irq/35-mei_me]
  468 ?        Ss     0:00 /sbin/dhclient -4 -v -i -pf /run/dhclient.enp3s0.pid -lf /var/lib/dhcp/dhclient.enp3s0
  478 ?        I      0:06 [kworker/0:3-events]
  484 ?        Ssl    0:00 /lib/systemd/systemd-timesyncd
  491 ?        Ss     0:00 /usr/sbin/cron -f
  493 ?        Ss     0:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activa
  497 ?        Ss     0:00 /lib/systemd/systemd-logind
  498 ?        Ssl    0:00 /usr/sbin/rsyslogd -n -iNONE
  504 ?        Ssl    0:00 /usr/bin/qemu-arm-static /opt/md380-emu/md380-emu -S 2470
  508 ?        Ss     0:00 /usr/sbin/sshd -D
  510 ?        Sl     0:19 /usr/bin/monit -c /etc/monit/monitrc
  569 ?        Ss     1:37 /usr/sbin/lighttpd -D -f /etc/lighttpd/lighttpd.conf
  598 ?        Ss     0:00 /usr/bin/php-cgi
  855 ?        Ssl    0:04 /usr/bin/node /opt/Web_Proxy/proxy.js 8080 2222
  856 ?        Ssl   17:59 /usr/bin/ircddbgatewayd -logdir:/var/log/ircddbgateway
  857 ?        Ssl   10:37 /opt/P25Gateway/P25Gateway /opt/P25Gateway/P25Gateway.ini
  858 ?        Ss     0:00 /opt/Quantar_Bridge/Quantar_Bridge /opt/Quantar_Bridge/Quantar_Bridge.ini
  859 ?        Ss     7:58 /opt/P25Parrot/P25Parrot 42011
  861 ?        Ss     7:56 /opt/NXDNParrot/NXDNParrot 42021
  864 ?        Ssl   10:50 /opt/NXDNGateway/NXDNGateway /opt/NXDNGateway/NXDNGateway.ini
  865 ?        Ss     7:58 /opt/YSFParrot/YSFParrot 42012
  866 ?        Ss    11:46 /opt/YSFGateway/YSFGateway /opt/YSFGateway/YSFGateway.ini
 2220 ?        I      0:00 [kworker/4:2-events]
 4623 ?        Ss     0:00 sshd: root@pts/0
 4681 ?        Ss     0:00 sshd: root@notty
 4684 ?        Ss     0:00 /lib/systemd/systemd --user
 4685 ?        S      0:00 (sd-pam)
 4698 pts/0    Ss+    0:00 -bash
 4707 ?        Ss     0:00 /usr/lib/openssh/sftp-server
 5368 tty1     Ss+    0:00 /sbin/agetty -o -p -- \u --noclear tty1 linux
 9176 ?        I      0:00 [kworker/7:1-cgroup_destroy]
11571 ?        I      0:01 [kworker/7:2-events]
12134 ?        S      0:10 /usr/bin/php-cgi
13103 ?        I      0:01 [kworker/u16:0-events_unbound]
16322 ?        Rs     0:00 sshd: root@pts/1
16324 ?        Ss     0:00 sshd: root@notty
16396 pts/1    Ss     0:00 -bash
16397 ?        I      0:00 [kworker/u16:1-events_unbound]
16406 ?        Ss     0:00 /usr/lib/openssh/sftp-server
18741 ?        Ssl   22:38 /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.ini
21092 ?        I      0:00 [kworker/3:0-events]
21559 ?        I      0:00 [kworker/5:1-cgroup_destroy]
24554 ?        I      0:00 [kworker/4:1-mm_percpu_wq]
25234 ?        I      0:01 [kworker/2:1-events]
26404 ?        S      0:10 /usr/bin/php-cgi
26642 ?        S      0:12 /usr/bin/php-cgi
26665 ?        S      0:10 /usr/bin/php-cgi
27366 ?        I      0:00 [kworker/4:0-events]
27545 ?        I      0:00 [kworker/6:2-cgroup_destroy]
28362 ?        I      0:00 [kworker/2:2-events]
28370 ?        I      0:00 [kworker/0:1-cgroup_destroy]
28887 ?        I      0:00 [kworker/3:1-cgroup_destroy]
28888 ?        I      0:00 [kworker/1:2-cgroup_destroy]
29863 ?        Zs     0:00 [cpu-temp] <defunct>
29864 ?        Zs     0:00 [dvswitch.sh] <defunct>
29865 ?        Zs     0:00 [dvswitch.sh] <defunct>
31447 ?        I      0:03 [kworker/1:0-events]
32483 pts/1    R+     0:00 ps ax


73
Scott,
N4UPC



On 1/4/2021 7:50 AM, Steve N4IRS wrote:
Scott,
So first we need to understand which vocoder you are using. Please post the startup output of Analog_Bridge.
The logs are in /var/log/dvswitch. If possible, I would prefer you capture the console output:
As root:
stop Analog_Bridge service
start Analog_Bridge in the foreground and capture the output.
also, please post the result of ps ax
 
Thanks, Steve

On 1/4/2021 8:06 AM, N4UPC - Scott via groups.io wrote:
Sorry. I was speaking of DMR only. I’ve been getting a lot of very digitized voices.

73,
Scott
N4UPC



On Mon, Jan 4, 2021 at 05:13, Corey Dean N3FE <n3fe@...> wrote:
In what way?  That is a pretty open question.  Between modes? Between the switch and your cell phone?  We need a little bit more info.


On Jan 3, 2021, at 11:15 PM, N4UPC - Scott via groups.io <n4upc@...> wrote:

Is it possible to ‘tune’ DVSwitch for better voice quality?






















2341 - 2360 of 10560