Date   

Re: Analog_Bridge to D-Star audio levels

Steve N4IRS
 

Mike,
Just to be clear, we are talking about DummyPrepeater to AllStarLink?

DummyRepeater <---> Allstarlink

Steve


On 02/11/2018 10:22 AM, Mike Swiatkowski via Groups.Io wrote:
Steve,
I noticed the source of my problem was setting AUDIO_UNITY on the ASL side in Analog_Bridge.ini.  Unity sounds better but the amplitude is probably 40% of what it needs to be.  Is there any way to bump up that level?  If I set AUDIO_USE_AGC I get the right drive level but the audio quality is a little less smooth.  I also experimented with AUDIO_USE_GAIN and that is about the same as with AGC interms of audio fidelity.

Question 2:  What  other AMBE interfaces can work with Analog_Bridge besides the ThumbDV from NW Digital?  I wonder if there is a better transcoder out there.

Mike, AA9VI


Re: Analog_Bridge to D-Star audio levels

Mike, AA9VI
 

Steve,
I noticed the source of my problem was setting AUDIO_UNITY on the ASL side in Analog_Bridge.ini.  Unity sounds better but the amplitude is probably 40% of what it needs to be.  Is there any way to bump up that level?  If I set AUDIO_USE_AGC I get the right drive level but the audio quality is a little less smooth.  I also experimented with AUDIO_USE_GAIN and that is about the same as with AGC interms of audio fidelity.

Question 2:  What  other AMBE interfaces can work with Analog_Bridge besides the ThumbDV from NW Digital?  I wonder if there is a better transcoder out there.

Mike, AA9VI


Analog_Bridge to D-Star audio levels

Mike, AA9VI
 

I am trying to increase the audio amplitude from Allstar to dummyrepeater using Analog_Bridge.  Besides Analog_Bridge.ini settings where can I do this?

Thanks,
Mike, AA9VI


Re: Transcoding between AMBE+ and AMBE+2

 

That is an option, but most parts are SMD and construction time is significant. 

I think you can buy as few as 10 pieces of the 3003 and pay before shipment. 

This whole project is to help the community, it is not a high volume or profit item.  (Building them in a professional assembly house and there are project costs.)

If there is not enough interest, it will simply not happen. (Orders will be refunded.)

Currently the order count is a few short but close. 

On Feb 7, 2018 14:00, "JJ Cummings" <cummingsj@...> wrote:
Here is a homebrew project that costs substantially less and has 3 channels:


The killer is the AMBE3003 chip, you have to order them in quantities of 90 from DVSI I have been told.  This would be much more economical thing to build or even have built I would think.

JJC 
N0PKT

On Wed, Feb 7, 2018 at 12:23 PM, John D Hays - K7VE <john@...> wrote:
I don't know if this group is aware of the 6 channel AMBE device build that is being planned, based on getting enough orders, see

http://nwdigitalradio.com/xcode-3006/



Re: Transcoding between AMBE+ and AMBE+2

JJ Cummings
 

Here is a homebrew project that costs substantially less and has 3 channels:


The killer is the AMBE3003 chip, you have to order them in quantities of 90 from DVSI I have been told.  This would be much more economical thing to build or even have built I would think.

JJC 
N0PKT

On Wed, Feb 7, 2018 at 12:23 PM, John D Hays - K7VE <john@...> wrote:
I don't know if this group is aware of the 6 channel AMBE device build that is being planned, based on getting enough orders, see

http://nwdigitalradio.com/xcode-3006/



Transcoding between AMBE+ and AMBE+2

 

I don't know if this group is aware of the 6 channel AMBE device build that is being planned, based on getting enough orders, see

http://nwdigitalradio.com/xcode-3006/


Re: hblink.py - CRITICAL UPDATE

Cort N0MJS <n0mjs@...>
 

After the reconnect, I don’t see a:

"Connection to Master Completed”

Implying we never actually get connected. The reason why is of interest, though I also need to look into why hblink.py hangs there and does not reset itself again. My guess is that I’m never checking to see if it actually completed and if not, resting it again. Something that’ll need added to the client maintenance loop.

That’s exactly the kind of info I needed to chase it down!


On Feb 7, 2018, at 5:41 AM, David <david@...> wrote:

Here is from the logs.  Looks like it restarts ok sometimes but not always

DEBUG 2018-02-06 18:50:40,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:50:40,244 (REPEATER-1) RPTPING Sent to Master. Total Sent: 19, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:50:45,244 (REPEATER-1) Client maintenance loop started
INFO 2018-02-06 18:50:45,245 (REPEATER-1) Sending login request to master 74.91.114.19:62031
DEBUG 2018-02-06 18:50:50,243 (REPEATER-1) Client maintenance loop started
INFO 2018-02-06 18:50:50,244 (REPEATER-1) Sending login request to master 74.91.114.19:62031
INFO 2018-02-06 18:50:50,267 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 758215133
INFO 2018-02-06 18:50:50,291 (REPEATER-1) Repeater Authentication Accepted
INFO 2018-02-06 18:50:50,292 (REPEATER-1) Repeater Configuration Sent
INFO 2018-02-06 18:50:50,322 (REPEATER-1) Repeater Configuration Accepted
INFO 2018-02-06 18:50:50,322 (REPEATER-1) Connection to Master Completed
DEBUG 2018-02-06 18:50:55,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:50:55,244 (REPEATER-1) RPTPING Sent to Master. Total Sent: 0, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:50:55,267 (REPEATER-1) MSTPONG Received. Pongs Since Connected: 1
DEBUG 2018-02-06 18:51:00,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:00,244 (REPEATER-1) RPTPING Sent to Master. Total Sent: 1, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:51:00,265 (REPEATER-1) MSTPONG Received. Pongs Since Connected: 2
DEBUG 2018-02-06 18:51:05,244 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:05,244 (REPEATER-1) RPTPING Sent to Master. Total Sent: 2, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:51:05,265 (REPEATER-1) MSTPONG Received. Pongs Since Connected: 3
DEBUG 2018-02-06 18:51:10,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:10,244 (REPEATER-1) RPTPING Sent to Master. Total Sent: 3, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:51:10,263 (REPEATER-1) MSTPONG Received. Pongs Since Connected: 4
DEBUG 2018-02-06 18:51:15,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:15,244 (REPEATER-1) RPTPING Sent to Master. Total Sent: 4, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:51:15,264 (REPEATER-1) MSTPONG Received. Pongs Since Connected: 5
DEBUG 2018-02-06 18:51:20,244 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:20,245 (REPEATER-1) RPTPING Sent to Master. Total Sent: 5, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:51:20,266 (REPEATER-1) MSTPONG Received. Pongs Since Connected: 6
DEBUG 2018-02-06 18:51:25,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:25,244 (REPEATER-1) RPTPING Sent to Master. Total Sent: 6, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:51:25,266 (REPEATER-1) MSTPONG Received. Pongs Since Connected: 7
DEBUG 2018-02-06 18:51:30,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:30,244 (REPEATER-1) RPTPING Sent to Master. Total Sent: 7, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:51:35,244 (REPEATER-1) Client maintenance loop started
INFO 2018-02-06 18:51:35,244 (REPEATER-1) Sending login request to master 74.91.114.19:62031
INFO 2018-02-06 18:51:35,266 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1635208484
INFO 2018-02-06 18:51:35,290 (REPEATER-1) Repeater Authentication Accepted
INFO 2018-02-06 18:51:35,291 (REPEATER-1) Repeater Configuration Sent
DEBUG 2018-02-06 18:51:40,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:45,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:50,243 (REPEATER-1) Client maintenance loop started


On Mon, Feb 5, 2018 at 8:47 AM, Cort N0MJS <n0mjs@...> wrote:
or if you’re using Git/Github:

"git checkout HB_Bridge”

to switch to that code locally.

On Feb 5, 2018, at 8:15 AM, Steve N4IRS <szingman@...> wrote:

https://github.com/n0mjs710/HBlink/tree/HB_Bridge

On 2/5/2018 8:49 AM, David wrote:
I do not remember where I found HB_Bridge the first time but I can not find the updated version.

On Fri, Feb 2, 2018 at 3:51 PM, Mike Zingman - N4IRR <mike.zingman@...> wrote:
HB_Bridge has taken up Cort's changes as well as updated any other component that has changed to date.



--
Cort Buffington
H: +1-785-813-1501
M: +1-785-865-7206










Cort Buffington
785-865-7206


Re: hblink.py - CRITICAL UPDATE

David
 

Here is from the logs.  Looks like it restarts ok sometimes but not always

DEBUG 2018-02-06 18:50:40,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:50:40,244 (REPEATER-1) RPTPING Sent to Master. Total Sent: 19, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:50:45,244 (REPEATER-1) Client maintenance loop started
INFO 2018-02-06 18:50:45,245 (REPEATER-1) Sending login request to master 74.91.114.19:62031
DEBUG 2018-02-06 18:50:50,243 (REPEATER-1) Client maintenance loop started
INFO 2018-02-06 18:50:50,244 (REPEATER-1) Sending login request to master 74.91.114.19:62031
INFO 2018-02-06 18:50:50,267 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 758215133
INFO 2018-02-06 18:50:50,291 (REPEATER-1) Repeater Authentication Accepted
INFO 2018-02-06 18:50:50,292 (REPEATER-1) Repeater Configuration Sent
INFO 2018-02-06 18:50:50,322 (REPEATER-1) Repeater Configuration Accepted
INFO 2018-02-06 18:50:50,322 (REPEATER-1) Connection to Master Completed
DEBUG 2018-02-06 18:50:55,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:50:55,244 (REPEATER-1) RPTPING Sent to Master. Total Sent: 0, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:50:55,267 (REPEATER-1) MSTPONG Received. Pongs Since Connected: 1
DEBUG 2018-02-06 18:51:00,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:00,244 (REPEATER-1) RPTPING Sent to Master. Total Sent: 1, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:51:00,265 (REPEATER-1) MSTPONG Received. Pongs Since Connected: 2
DEBUG 2018-02-06 18:51:05,244 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:05,244 (REPEATER-1) RPTPING Sent to Master. Total Sent: 2, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:51:05,265 (REPEATER-1) MSTPONG Received. Pongs Since Connected: 3
DEBUG 2018-02-06 18:51:10,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:10,244 (REPEATER-1) RPTPING Sent to Master. Total Sent: 3, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:51:10,263 (REPEATER-1) MSTPONG Received. Pongs Since Connected: 4
DEBUG 2018-02-06 18:51:15,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:15,244 (REPEATER-1) RPTPING Sent to Master. Total Sent: 4, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:51:15,264 (REPEATER-1) MSTPONG Received. Pongs Since Connected: 5
DEBUG 2018-02-06 18:51:20,244 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:20,245 (REPEATER-1) RPTPING Sent to Master. Total Sent: 5, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:51:20,266 (REPEATER-1) MSTPONG Received. Pongs Since Connected: 6
DEBUG 2018-02-06 18:51:25,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:25,244 (REPEATER-1) RPTPING Sent to Master. Total Sent: 6, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:51:25,266 (REPEATER-1) MSTPONG Received. Pongs Since Connected: 7
DEBUG 2018-02-06 18:51:30,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:30,244 (REPEATER-1) RPTPING Sent to Master. Total Sent: 7, Total Missed: 0, Currently Outstanding: 0
DEBUG 2018-02-06 18:51:35,244 (REPEATER-1) Client maintenance loop started
INFO 2018-02-06 18:51:35,244 (REPEATER-1) Sending login request to master 74.91.114.19:62031
INFO 2018-02-06 18:51:35,266 (REPEATER-1) Repeater Login ACK Received with 32bit ID: 1635208484
INFO 2018-02-06 18:51:35,290 (REPEATER-1) Repeater Authentication Accepted
INFO 2018-02-06 18:51:35,291 (REPEATER-1) Repeater Configuration Sent
DEBUG 2018-02-06 18:51:40,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:45,243 (REPEATER-1) Client maintenance loop started
DEBUG 2018-02-06 18:51:50,243 (REPEATER-1) Client maintenance loop started


On Mon, Feb 5, 2018 at 8:47 AM, Cort N0MJS <n0mjs@...> wrote:
or if you’re using Git/Github:

"git checkout HB_Bridge”

to switch to that code locally.

On Feb 5, 2018, at 8:15 AM, Steve N4IRS <szingman@...> wrote:

https://github.com/n0mjs710/HBlink/tree/HB_Bridge

On 2/5/2018 8:49 AM, David wrote:
I do not remember where I found HB_Bridge the first time but I can not find the updated version.

On Fri, Feb 2, 2018 at 3:51 PM, Mike Zingman - N4IRR <mike.zingman@...> wrote:
HB_Bridge has taken up Cort's changes as well as updated any other component that has changed to date.



--
Cort Buffington
H: +1-785-813-1501
M: +1-785-865-7206







Re: DMRmonitor broken?

David Andrzejewski KD8TWG
 

They’re definitely talking.


-- 

David Andrzejewski
E-mail/iMessage/Jabber: david@...
PGP Key ID: 5EBA8A72


On Feb 7, 2018, at 04:30, Peter M0NWI <peter-martin@...> wrote:

David,


It's not something as simple as a networking issue is it?  The sender within DMRLink and receiver in DMRMonitor need to be able to connect over open sockets, just an idea?


I'm running a version from a few months ago, and it works OK for me.


73,

Peter



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of David Andrzejewski KD8TWG via Groups.Io <david@...>
Sent: 07 February 2018 05:08
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] DMRmonitor broken?
 
I know. But I really like it, so I’ll keep poking around. I’m not sure if the problem is in the DMRLink reporting server or dmrmonitor.

Thanks!

-- 

David Andrzejewski
E-mail/iMessage/Jabber: david@...
PGP Key ID: 5EBA8A72


On Feb 7, 2018, at 00:04, Cort N0MJS <n0mjs@...> wrote:

DMRmonitor is not a supported application.

I don’t consider it part of DVSwitch. It’s just a repo of mine that still just a thought in progress


On Feb 6, 2018, at 8:54 PM, David Andrzejewski KD8TWG via Groups.Io <david@...> wrote:

I recently did a git pull on the dmrlink repo, and now DMRmonitor seems to be broken.  It's no longer showing calls, but the log down below is being updated.  I'm treading lightly here because I'm still learning the code, but from what I can tell, it's not receiving RCM messages from the reporting server.  I am probably wrong on that part, but it's my best educated guess.

Has something changed with regard to the reporting server portion and maybe DMRmonitor wasn't updated to support it?  I'm a professional Python developer and I'm happy to do the work if someone wants to point me in the right direction.

Also, is there a test harness for this, e.g. something that can construct and send packets, so I don't have to continually key up my repeater to test? ;)

Thanks!


Re: DMRmonitor broken?

Peter M0NWI
 

David,


It's not something as simple as a networking issue is it?  The sender within DMRLink and receiver in DMRMonitor need to be able to connect over open sockets, just an idea?


I'm running a version from a few months ago, and it works OK for me.


73,

Peter



From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of David Andrzejewski KD8TWG via Groups.Io <david@...>
Sent: 07 February 2018 05:08
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] DMRmonitor broken?
 
I know. But I really like it, so I’ll keep poking around. I’m not sure if the problem is in the DMRLink reporting server or dmrmonitor.

Thanks!

-- 

David Andrzejewski
E-mail/iMessage/Jabber: david@...
PGP Key ID: 5EBA8A72


On Feb 7, 2018, at 00:04, Cort N0MJS <n0mjs@...> wrote:

DMRmonitor is not a supported application.

I don’t consider it part of DVSwitch. It’s just a repo of mine that still just a thought in progress


On Feb 6, 2018, at 8:54 PM, David Andrzejewski KD8TWG via Groups.Io <david@...> wrote:

I recently did a git pull on the dmrlink repo, and now DMRmonitor seems to be broken.  It's no longer showing calls, but the log down below is being updated.  I'm treading lightly here because I'm still learning the code, but from what I can tell, it's not receiving RCM messages from the reporting server.  I am probably wrong on that part, but it's my best educated guess.

Has something changed with regard to the reporting server portion and maybe DMRmonitor wasn't updated to support it?  I'm a professional Python developer and I'm happy to do the work if someone wants to point me in the right direction.

Also, is there a test harness for this, e.g. something that can construct and send packets, so I don't have to continually key up my repeater to test? ;)

Thanks!


Re: DMRmonitor broken?

David Andrzejewski KD8TWG
 

I know. But I really like it, so I’ll keep poking around. I’m not sure if the problem is in the DMRLink reporting server or dmrmonitor.

Thanks!

-- 

David Andrzejewski
E-mail/iMessage/Jabber: david@...
PGP Key ID: 5EBA8A72


On Feb 7, 2018, at 00:04, Cort N0MJS <n0mjs@...> wrote:

DMRmonitor is not a supported application.

I don’t consider it part of DVSwitch. It’s just a repo of mine that still just a thought in progress


On Feb 6, 2018, at 8:54 PM, David Andrzejewski KD8TWG via Groups.Io <david@...> wrote:

I recently did a git pull on the dmrlink repo, and now DMRmonitor seems to be broken.  It's no longer showing calls, but the log down below is being updated.  I'm treading lightly here because I'm still learning the code, but from what I can tell, it's not receiving RCM messages from the reporting server.  I am probably wrong on that part, but it's my best educated guess.

Has something changed with regard to the reporting server portion and maybe DMRmonitor wasn't updated to support it?  I'm a professional Python developer and I'm happy to do the work if someone wants to point me in the right direction.

Also, is there a test harness for this, e.g. something that can construct and send packets, so I don't have to continually key up my repeater to test? ;)

Thanks!


Re: DMRmonitor broken?

Cort N0MJS <n0mjs@...>
 

DMRmonitor is not a supported application.

I don’t consider it part of DVSwitch. It’s just a repo of mine that still just a thought in progress


On Feb 6, 2018, at 8:54 PM, David Andrzejewski KD8TWG via Groups.Io <david@...> wrote:

I recently did a git pull on the dmrlink repo, and now DMRmonitor seems to be broken.  It's no longer showing calls, but the log down below is being updated.  I'm treading lightly here because I'm still learning the code, but from what I can tell, it's not receiving RCM messages from the reporting server.  I am probably wrong on that part, but it's my best educated guess.

Has something changed with regard to the reporting server portion and maybe DMRmonitor wasn't updated to support it?  I'm a professional Python developer and I'm happy to do the work if someone wants to point me in the right direction.

Also, is there a test harness for this, e.g. something that can construct and send packets, so I don't have to continually key up my repeater to test? ;)

Thanks!


DMRmonitor broken?

David Andrzejewski KD8TWG
 

I recently did a git pull on the dmrlink repo, and now DMRmonitor seems to be broken.  It's no longer showing calls, but the log down below is being updated.  I'm treading lightly here because I'm still learning the code, but from what I can tell, it's not receiving RCM messages from the reporting server.  I am probably wrong on that part, but it's my best educated guess.

Has something changed with regard to the reporting server portion and maybe DMRmonitor wasn't updated to support it?  I'm a professional Python developer and I'm happy to do the work if someone wants to point me in the right direction.

Also, is there a test harness for this, e.g. something that can construct and send packets, so I don't have to continually key up my repeater to test? ;)

Thanks!


Re: Hbilink + Hot spot

Cort N0MJS <n0mjs@...>
 

I’m gonna have to defer to others. I have no hotspots, don’t use PiStar and don’t know what DMR Gateway mode is.

On Feb 6, 2018, at 5:48 PM, Nicola IT9FXF via Groups.Io <onetechct@...> wrote:

[Edited Message Follows]

Hi all. I'm trying to hblink as a server connected to 3 repeaters mmdv and today I added a small hotspot. I saw that using hotspot with pistar in dmr gateway mode I can not log into hblink. It's normal ?
If I use hotspots with pistar mmdvm host it works badly and often you hear bad noises ((
Thanks

Cort Buffington
785-865-7206


Re: HBlink BM Issue Fixed

David
 

Mine had stop twice on sun.    I am now try running everything from the hb_bridge portion.   Before I had pieced together the programs.

On Tue, Feb 6, 2018 at 7:51 AM, Cort N0MJS <n0mjs@...> wrote:
Guys,

Quick note – the changes to hblink.py seem to have fixed the Brandmeister disconnect problem. Been running for several days solid. Thanks again to Corey, N3FE. Without his help on the BM side this would have taken much longer to find!

0x49 DE N0MJS

Cort Buffington
785-865-7206






HBlink BM Issue Fixed

Cort N0MJS <n0mjs@...>
 

Guys,

Quick note – the changes to hblink.py seem to have fixed the Brandmeister disconnect problem. Been running for several days solid. Thanks again to Corey, N3FE. Without his help on the BM side this would have taken much longer to find!

0x49 DE N0MJS

Cort Buffington
785-865-7206


Re: DVSwitch use with different Networks

Stephen Brown - K1LNX
 

Too many empires trying to be built, I agree with this 100% 

73
Stephen
K1LNX

On Mon, Feb 5, 2018 at 11:46 AM, Steve N4IRS <szingman@...> wrote:
After some internal discussion, we have established a official position for connecting any of the DVSwitch tools to other Network servers (c-Bridge, BM, DMR+...) The position is posted as the home page of the Wiki.

For DVSwitch,
73, Steve N4IRS  



DVSwitch use with different Networks

Steve N4IRS
 
Edited

After some internal discussion, we have established a official position for connecting any of the DVSwitch tools to other Network servers (c-Bridge, BM, DMR+...) The position is posted as the home page of the Wiki.


https://dvswitch.groups.io/g/main/wiki/home

For DVSwitch,
73, Steve N4IRS


Re: hblink.py - CRITICAL UPDATE

Cort N0MJS <n0mjs@...>
 

or if you’re using Git/Github:

"git checkout HB_Bridge”

to switch to that code locally.

On Feb 5, 2018, at 8:15 AM, Steve N4IRS <szingman@...> wrote:

https://github.com/n0mjs710/HBlink/tree/HB_Bridge

On 2/5/2018 8:49 AM, David wrote:
I do not remember where I found HB_Bridge the first time but I can not find the updated version.

On Fri, Feb 2, 2018 at 3:51 PM, Mike Zingman - N4IRR <mike.zingman@...> wrote:
HB_Bridge has taken up Cort's changes as well as updated any other component that has changed to date.



--
Cort Buffington
H: +1-785-813-1501
M: +1-785-865-7206






Re: hblink.py - CRITICAL UPDATE

Steve N4IRS
 

On 2/5/2018 8:49 AM, David wrote:
I do not remember where I found HB_Bridge the first time but I can not find the updated version.

On Fri, Feb 2, 2018 at 3:51 PM, Mike Zingman - N4IRR <mike.zingman@...> wrote:
HB_Bridge has taken up Cort's changes as well as updated any other component that has changed to date.


9001 - 9020 of 9820