Date   

New Install of DVSwich

N9UMJ
 

I'm running an older version of DV Switch on a vps, I would like to install it on a different VPS, I'm running Ubuntu on the old VPS and DV Switch and Running Debian Stretch on the New VPS.
If I made a fresh install on the Debian Stretch VPS what would be the best install process for this? I see there are new features and repo's available.

The current original version I'm using supports a multi repeater linked network...I looked at DV server and it appeared to be just for use with an individual  mobile user.
Please recommend the best method of making the change.

Thank You
Rick n9umj


Re: Dvswitch android app dropping out.

john.sutton45@...
 

It is now working perfectly after I swapped the sd card for one with the Dvlink application to test the Raspberry Pi. On reinsertion of Dvsitch sd card it now working perfectly. I think it is possible disturbance of the Raspberry Pi caused slight movement of sd card and caused this problem. Thanks for your response.


Re: Dvswitch android app dropping out.

Steve N4IRS
 

Please show the Analog_Bridge log when connecting and the app disconnecting.

On 2/4/21 6:52 AM, john.sutton45 via groups.io wrote:
It is WiFi and I am also running a Allstar Raspberry pi node on account one on Dvswitch android app without problems. Audio is relayed on dashboard perfectly without a hiccup when app drops out and goes to unregistered. Starting the app again it works for about approximately  10 seconds then drops out again, this also happens on 3 android devices.


Re: Dvswitch android app dropping out.

john.sutton45@...
 

It is WiFi and I am also running a Allstar Raspberry pi node on account one on Dvswitch android app without problems. Audio is relayed on dashboard perfectly without a hiccup when app drops out and goes to unregistered. Starting the app again it works for about approximately  10 seconds then drops out again, this also happens on 3 android devices.


Re: USRP

Steve N4IRS
 

I do not know of a document of the "exact" details. This is what we used <https://github.com/AllStarLink/Asterisk/blob/master/asterisk/channels/chan_usrp.c>
This may help also <https://github.com/DVSwitch/USRP_Client>

Steve N4IRS

On 2/3/21 10:08 PM, Skyler Fennell wrote:
Is there a document on the exact details of the standard of USRP protocol and how it works? I did a little hunting and didn't find a whole lot. 

Thanks,
Skyler W0SKY


USRP

Skyler Fennell
 

Is there a document on the exact details of the standard of USRP protocol and how it works? I did a little hunting and didn't find a whole lot. 

Thanks,
Skyler W0SKY


Re: Where the heck is hUC?

Steve Siesel [K4KSA]
 

Steve and Mike!

 

That’s great news. I have a DV Switch server up and running on a Vultr host, waiting for Analog_Reflector! Can’t wait for it to get out of Beta. Please let me know if you need any help testing.

 

Steve

 

 

From: main@DVSwitch.groups.io [mailto:main@DVSwitch.groups.io] On Behalf Of Steve N4IRS
Sent: Wednesday, February 3, 2021 6:47 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Where the heck is hUC?

 

Since it's been quiet, here is a quick update.

The HTML client has been through beta testing and we are happy with the results.
The server that the client needs, Analog_Reflector has gone into beta test. We have 2 DMR networks that have the client / server installed and we have begun final testing.
More info when available.

73, N4IRR and N4IRS 


Re: Where the heck is hUC?

Steve N4IRS
 

On 2/3/21 7:01 PM, Mike KB8JNM wrote:

Should I guess that hUC stands for ' HTML User Client ' ?

On 2/3/2021 6:47 PM, Steve N4IRS wrote:
Since it's been quiet, here is a quick update.

The HTML client has been through beta testing and we are happy with the results.
The server that the client needs, Analog_Reflector has gone into beta test. We have 2 DMR networks that have the client / server installed and we have begun final testing.
More info when available.

73, N4IRR and N4IRS 


Re: Where the heck is hUC?

Steve N4IRS
 

HTML USRP client

On 2/3/21 7:01 PM, Mike KB8JNM wrote:

Should I guess that hUC stands for ' HTML User Client ' ?

On 2/3/2021 6:47 PM, Steve N4IRS wrote:
Since it's been quiet, here is a quick update.

The HTML client has been through beta testing and we are happy with the results.
The server that the client needs, Analog_Reflector has gone into beta test. We have 2 DMR networks that have the client / server installed and we have begun final testing.
More info when available.

73, N4IRR and N4IRS 


Re: Where the heck is hUC?

Mike KB8JNM
 

Should I guess that hUC stands for ' HTML User Client ' ?

On 2/3/2021 6:47 PM, Steve N4IRS wrote:
Since it's been quiet, here is a quick update.

The HTML client has been through beta testing and we are happy with the results.
The server that the client needs, Analog_Reflector has gone into beta test. We have 2 DMR networks that have the client / server installed and we have begun final testing.
More info when available.

73, N4IRR and N4IRS 


Re: Where the heck is hUC?

Steve N4IRS
 

Since it's been quiet, here is a quick update.

The HTML client has been through beta testing and we are happy with the results.
The server that the client needs, Analog_Reflector has gone into beta test. We have 2 DMR networks that have the client / server installed and we have begun final testing.
More info when available.

73, N4IRR and N4IRS 


Re: Dvswitch android app dropping out.

Steve N4IRS
 

Wifi or cellular?

On 2/3/2021 8:06 AM, john.sutton45 via groups.io wrote:
Dvswitch Android app audio dropping out after after several seconds and drops out to unregistered on all modes. Dvswitch is running perfectly on raspberry pi as audio is being relayed perfectly the dashboard. This has only happened over the last couple of days.


Re: Dividing up rpt.conf

Mike KB8JNM
 

Check ownership and permissions of the custom files. Probably permissions.

On 2/2/2021 9:23 PM, Neil k8it wrote:
I want to place sets of functions in my rpt.conf file into external include files, but I am having problems.
 
#includeifexists custom/rpt.conf
 
In /etc/asteriskI created folder custom, and placed in it a new file called rpt.con. In this file, I start with the following line.
[functions41838]
followed by my added functions that I want to add. It appears that these functions never get loaded.
What am I doing wrong
 
 
Thanks
73 Neil Sablatzky  K8IT


Dvswitch android app dropping out.

john.sutton45@...
 

Dvswitch Android app audio dropping out after after several seconds and drops out to unregistered on all modes. Dvswitch is running perfectly on raspberry pi as audio is being relayed perfectly the dashboard. This has only happened over the last couple of days.


Dividing up rpt.conf

Neil k8it
 

I want to place sets of functions in my rpt.conf file into external include files, but I am having problems.
 
#includeifexists custom/rpt.conf
 
In /etc/asteriskI created folder custom, and placed in it a new file called rpt.con. In this file, I start with the following line.
[functions41838]
followed by my added functions that I want to add. It appears that these functions never get loaded.
What am I doing wrong
 
 
Thanks
73 Neil Sablatzky  K8IT


Re: MMDVM_Bridge connection to XLX

Jon 2E0OPT
 

Eric you sir are a star. I knew something wasn't quite right but couldn't put my finger on it. 


Re: DVSwitch voice works just fine on C4FM but it's not allowed on Wires-x

IK7VXC Mike
 

Thank you


Re: DMR -> FCS Reflectors

Keith Mitchell
 

Any answer to this . What ports should I use.I have the same problem


Re: MMDVM_Bridge connection to XLX

Eric-K6KWB
 

Jon

On Tue, Feb 2, 2021 at 02:34 AM, Jon 2E0OPT wrote:
[DMR Network]
Enable=1
Address=127.0.0.1  >>>>>>> make sure you place IP of your XLX or DNS
Port=62030
Jitter=360
Local=62041
Password=Passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
Options=XLX:4002
Slot1=0
Slot2=1
Debug=1
73, Eric


MMDVM_Bridge connection to XLX

Jon 2E0OPT
 

Hey All.

I've been trying to connect MMDVM_Bridge to my own instance of XLX I believe I have set it up correctly following the various posts I can find on this group but when I start MMDVM_Bridge with ./MMDVM_Bridge MMDVM_Bridge.ini I get the following:

 I: 2021-02-02 09:22:44.660 MMDVM_Bridge:
I: 2021-02-02 09:22:44.661 Portions Copyright (C) 2018, 2019, 2020 DVSwitch, INAD.
I: 2021-02-02 09:22:44.661 Hacks by Mike N4IRR and Steve N4IRS
I: 2021-02-02 09:22:44.661 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2021-02-02 09:22:44.661 This software is for use on amateur radio networks only,
I: 2021-02-02 09:22:44.661 it is to be used for educational purposes only. Its use on
I: 2021-02-02 09:22:44.661 commercial networks is strictly prohibited.
I: 2021-02-02 09:22:44.661 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2021-02-02 09:22:44.661 MMDVM_Bridge-20201129_V1.6.2 is starting
M: 2021-02-02 09:22:44.661 Built 08:55:21 Dec  1 2020 (GitID #89f8998)
I: 2021-02-02 09:22:44.661 General Parameters
I: 2021-02-02 09:22:44.662     Callsign: M7KMW
I: 2021-02-02 09:22:44.662     Id: 2345247
I: 2021-02-02 09:22:44.662     Duplex: no
I: 2021-02-02 09:22:44.662     Timeout: 180s
I: 2021-02-02 09:22:44.662     D-Star: disabled
I: 2021-02-02 09:22:44.662     DMR: enabled
I: 2021-02-02 09:22:44.662     YSF: disabled
I: 2021-02-02 09:22:44.662     P25: disabled
I: 2021-02-02 09:22:44.662     NXDN: disabled
I: 2021-02-02 09:22:44.662 Modem Parameters
I: 2021-02-02 09:22:44.663     Port: /dev/null
I: 2021-02-02 09:22:44.663     RX Invert: no
I: 2021-02-02 09:22:44.663     TX Invert: no
I: 2021-02-02 09:22:44.663     PTT Invert: no
I: 2021-02-02 09:22:44.663     TX Delay: 100ms
I: 2021-02-02 09:22:44.663     RX Offset: 0Hz
I: 2021-02-02 09:22:44.663     TX Offset: 0Hz
I: 2021-02-02 09:22:44.663     RX DC Offset: 0
I: 2021-02-02 09:22:44.663     TX DC Offset: 0
I: 2021-02-02 09:22:44.663     RF Level: 100.0%
I: 2021-02-02 09:22:44.663     DMR Delay: 0 (0.0ms)
I: 2021-02-02 09:22:44.663     RX Level: 50.0%
I: 2021-02-02 09:22:44.664     CW Id TX Level: 50.0%
I: 2021-02-02 09:22:44.664     D-Star TX Level: 50.0%
I: 2021-02-02 09:22:44.664     DMR TX Level: 50.0%
I: 2021-02-02 09:22:44.664     YSF TX Level: 50.0%
I: 2021-02-02 09:22:44.664     P25 TX Level: 50.0%
I: 2021-02-02 09:22:44.664     NXDN TX Level: 50.0%
I: 2021-02-02 09:22:44.664     RX Frequency: 222340000Hz (222340000Hz)
I: 2021-02-02 09:22:44.664     TX Frequency: 224940000Hz (224940000Hz)
M: 2021-02-02 09:22:44.664 Opening the MMDVM
I: 2021-02-02 09:22:44.665 Display Parameters
I: 2021-02-02 09:22:44.665     Type:
I: 2021-02-02 09:22:44.665 DMR Network Parameters
I: 2021-02-02 09:22:44.665     Address: 127.0.0.1
I: 2021-02-02 09:22:44.665     Port: 62030
I: 2021-02-02 09:22:44.665     Local: 62041
I: 2021-02-02 09:22:44.665     Jitter: 360ms
I: 2021-02-02 09:22:44.665     Slot 1: disabled
I: 2021-02-02 09:22:44.665     Slot 2: enabled
I: 2021-02-02 09:22:44.665     Mode Hang: 3s
I: 2021-02-02 09:22:44.665     Options: XLX:4002
I: 2021-02-02 09:22:44.666 Info Parameters
I: 2021-02-02 09:22:44.666     Callsign: M7KMW
I: 2021-02-02 09:22:44.666     RX Frequency: 222340000Hz
I: 2021-02-02 09:22:44.666     TX Frequency: 224940000Hz
I: 2021-02-02 09:22:44.666     Power: 1W
I: 2021-02-02 09:22:44.666     Latitude: 41.733299deg N
I: 2021-02-02 09:22:44.666     Longitude: -50.399899deg E
I: 2021-02-02 09:22:44.666     Height: 0m
I: 2021-02-02 09:22:44.666     Location: "Iceberg, North Atlantic"
I: 2021-02-02 09:22:44.666     Description: "MMDVM_Bridge"
I: 2021-02-02 09:22:44.666     URL: "https://groups.io/g/DVSwitch"
M: 2021-02-02 09:22:44.667 DMR, Opening DMR Network
I: 2021-02-02 09:22:44.667 RSSI
I: 2021-02-02 09:22:44.667     Mapping File: RSSI.dat
W: 2021-02-02 09:22:44.667 Cannot open the RSSI data file - RSSI.dat
I: 2021-02-02 09:22:44.667 DMR Id Lookups
I: 2021-02-02 09:22:44.667     File: /var/lib/mmdvm/DMRIds.dat
I: 2021-02-02 09:22:44.667     Reload: 24 hours
I: 2021-02-02 09:22:44.864 Loaded 186564 Ids to the DMR callsign lookup table
I: 2021-02-02 09:22:44.864 DMR RF Parameters
I: 2021-02-02 09:22:44.864     Id: 2345247
I: 2021-02-02 09:22:44.864     Color Code: 1
I: 2021-02-02 09:22:44.864     Self Only: no
I: 2021-02-02 09:22:44.864     Embedded LC Only: yes
I: 2021-02-02 09:22:44.865     Dump Talker Alias Data: no
I: 2021-02-02 09:22:44.865     Prefixes: 0
I: 2021-02-02 09:22:44.865     Call Hang: 3s
I: 2021-02-02 09:22:44.865     TX Hang: 3s
I: 2021-02-02 09:22:44.865     Mode Hang: 10s
M: 2021-02-02 09:22:44.865 DMR, Opening INI file: DVSwitch.ini
M: 2021-02-02 09:22:44.865 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2021-02-02 09:22:44.865 DMR, Setting [DMR] TXPort -> 31103
M: 2021-02-02 09:22:44.865 DMR, Setting [DMR] RXPort -> 31100
M: 2021-02-02 09:22:44.865 DMR, Setting [DMR] Slot -> 2
M: 2021-02-02 09:22:44.866 DMR, Transmitting on 127.0.0.1:31103, and listening on port 31100.  Result = 1
M: 2021-02-02 09:22:44.866 MMDVM_Bridge-20201129_V1.6.2 is running
I: 2021-02-02 09:22:44.866 Started the DMR Id lookup reload thread
E: 2021-02-02 09:23:54.872 DMR, Connection to the master has timed out, retrying connection
M: 2021-02-02 09:23:54.872 DMR, Closing DMR Network
M: 2021-02-02 09:23:54.872 DMR, Opening DMR Network

MMDVM_Bridge shows no sign of being connected to anything that I can see on the XLX side of things and I've run out of things to try

E: 2021-02-02 09:23:54.872 DMR, Connection to the master has timed out, retrying connection
M: 2021-02-02 09:23:54.872 DMR, Closing DMR Network
M: 2021-02-02 09:23:54.872 DMR, Opening DMR Network

This leads me to belive there is something wrong with the either XLX or MMDVM_Bridge but considering how little there is to edit on the XLX side this is either a problem with MMDVM_Bridge itself or something wrong with the guides/advice I've followed. If anyone could help I'd be truly greatful as it all seems right to my eyes

My MMDVM_Bridge.ini:
[General]
Callsign=**** redacted
Id=**** redacted
Timeout=180
Duplex=0
 
[Info]
RXFrequency=222340000
TXFrequency=224940000
Power=1
Latitude=41.7333
Longitude=-50.3999
Height=0
Location=Iceberg, North Atlantic
Description=MMDVM_Bridge
URL=https://groups.io/g/DVSwitch
 
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge
 
[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24
 
[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24

[Modem]
Port=/dev/null
RSSIMappingFile=RSSI.dat
Trace=0
Debug=0
 
[D-Star]
Enable=0
Module=C
 
[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
 
[System Fusion]
Enable=0
 
[P25]
Enable=0
NAC=293
 
[NXDN]
Enable=0
RAN=1

[D-Star Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=0
 
[DMR Network]
Enable=1
Address=127.0.0.1
Port=62030
Jitter=360
Local=62041
Password=Passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
Options=XLX:4002
Slot1=0
Slot2=1
Debug=1
 
[System Fusion Network]
Enable=0
LocalAddress=0
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166
Debug=0
[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0
 
[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020

1441 - 1460 of 9820