Date   

Re: Brandmeister block DVSwitch

Pierre Martel
 

Just ask them to make an open bridge connection available to you. 


Le mar. 9 févr. 2021 à 01:42, <ruediger.h@...> a écrit :
Hi there.
Since Yesterday, my DWSwitch is disabled from Brandmeister (master1.bm262.de)
Brandmeister Team is missing the Open Bridge Protocoll and cut off all DVSWitches as long DVSwitch is not support the Open Bridge Protocoll

Is there any solution planned to implement that Protocol ?


Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ? #mmdvm_bridge

Mike KB8JNM
 

Have you changed from the default password for your dmr log-in to BM ?.

passw0rd no longer valid

On 2/9/2021 9:06 AM, Uli wrote:
My bridge did work perfectly for quite a while but now does not function anymore because a few days ago Brandmeister here had the bright idea to block all DVswitch systems from their network that connect to a BM Talkgroup.


Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ? #mmdvm_bridge

Uli
 

My bridge did work perfectly for quite a while but now does not function anymore because a few days ago Brandmeister here had the bright idea to block all DVswitch systems from their network that connect to a BM Talkgroup.


Brandmeister block DVSwitch

R. H.
 

Hi there.
Since Yesterday, my DWSwitch is disabled from Brandmeister (master1.bm262.de)
Brandmeister Team is missing the Open Bridge Protocoll and cut off all DVSWitches as long DVSwitch is not support the Open Bridge Protocoll

Is there any solution planned to implement that Protocol ?


Re: DVSwitch dashboard RX Monitor audio

David Young
 

Steve,

That did the trick.

Thanks again!
--
Dave WB6DTB


Re: DVSwitch dashboard RX Monitor audio

Steve N4IRS
 

If I had to guess, I would say you reused a older Analog_bridge.ini

Add pcmPort = 2222

emulatorAddress = 127.0.0.1:2470        ; IP address and port of the md380 server

pcmPort = 2222                          ; UDP port to send to the WebProxy

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]



On 2/8/21 8:24 PM, David Young wrote:
Don't think my previous post reply went through so sending Analog_Bridge.ini again.
--
Dave WB6DTB


Re: DVSwitch dashboard RX Monitor audio

David Young
 

Don't think my previous post reply went through so sending Analog_Bridge.ini again.
--
Dave WB6DTB


Re: DVSwitch dashboard RX Monitor audio

Steve N4IRS
 

The AB log was enough. Post you Analog_Bridge.ini

On 2/8/21 7:45 PM, Steve Zingman wrote:
OK,
Show me the Analog_Bridge startup through passing audio to the client.

On 2/8/21 7:44 PM, David Young wrote:
Yes, this was a clean install on a cloud server as I re-imaged the server with Debian 10 amd64 buster prior to the installation following your original Allstar / DVSwitch-Server installation procedure from 1-29-2021.  The installation went without any problems and the Allstar and DVSwitch bridge from the Allstar node to our hblink3 master hub works perfectly.
--
Dave WB6DTB



Re: DVSwitch dashboard RX Monitor audio

David Young
 

Not exactly sure what you are asking for, here are log files from Analog_Bridge and MMDVM_Bridge.
--
Dave WB6DTB


Re: DVSwitch dashboard RX Monitor audio

Steve N4IRS
 

OK,
Show me the Analog_Bridge startup through passing audio to the client.

On 2/8/21 7:44 PM, David Young wrote:
Yes, this was a clean install on a cloud server as I re-imaged the server with Debian 10 amd64 buster prior to the installation following your original Allstar / DVSwitch-Server installation procedure from 1-29-2021.  The installation went without any problems and the Allstar and DVSwitch bridge from the Allstar node to our hblink3 master hub works perfectly.
--
Dave WB6DTB


Re: DVSwitch dashboard RX Monitor audio

David Young
 

Yes, this was a clean install on a cloud server as I re-imaged the server with Debian 10 amd64 buster prior to the installation following your original Allstar / DVSwitch-Server installation procedure from 1-29-2021.  The installation went without any problems and the Allstar and DVSwitch bridge from the Allstar node to our hblink3 master hub works perfectly.
--
Dave WB6DTB


Re: DVSwitch dashboard RX Monitor audio

Steve N4IRS
 

I assume the server is not behind a firewall. Is this a fresh install? Fresh install of Analog_Bridge.ini?

On 2/8/21 7:30 PM, David Young wrote:
Hi Steve,

See alot of remote client connected then disconnected.
Attache is the proxy.log file.

Thanks
--
Dave WB6DTB


Re: DVSwitch dashboard RX Monitor audio

David Young
 

Hi Steve,

See alot of remote client connected then disconnected.
Attache is the proxy.log file.

Thanks
--
Dave WB6DTB


Re: DVSwitch dashboard RX Monitor audio

Steve N4IRS
 

Did you look at the proxy.log in /var/log/dvswitch?

On 2/8/21 6:08 PM, David Young wrote:
Installed the new DVSwitch-Server on cloud server and doing bridge from an Allstar node to DMR.  Bridge works perfectly as does the DVSwitch dashboard.
What I cannot get to work is RX Monitor audio through my computer speakers when by pressing the RX Monitor button on the dashboard which turns green.  No audio is heard from QSO's.  I did look at the dashboard config.php file and the setting RXMONITOR = "YES".

Is there another setting I am missing or any ideas?
--
Dave WB6DTB


DVSwitch dashboard RX Monitor audio

David Young
 

Installed the new DVSwitch-Server on cloud server and doing bridge from an Allstar node to DMR.  Bridge works perfectly as does the DVSwitch dashboard.
What I cannot get to work is RX Monitor audio through my computer speakers when by pressing the RX Monitor button on the dashboard which turns green.  No audio is heard from QSO's.  I did look at the dashboard config.php file and the setting RXMONITOR = "YES".

Is there another setting I am missing or any ideas?
--
Dave WB6DTB


Reloading password

Pete Fierro <overthetop52@...>
 

  Hey guys

    Any reason as to why I need to keep reloading my password in brandmeister selfcare hotspot security once in awhile?

    Is there a character entry limit I may have exceeded?

    Running ASL to DMR bridge on a rpi2.

Thanks
Pete
KD2ARB 


Re: P25 to DMR/XLX

Kevin N9OIG
 

Steve I had DVSwitch all working for my IPSC2 server P25 to DMR all works prefect. We just added an XLX reflector connection in and DMR passes to XLX and YSF both ways DMR and YSF passes to P25 correctly but P25 comes up the callsign  shows then ysf side just drops. I tried connecting the DVswitch directly to the XLX reflector I can get it to connect but I connect get it to specify a module. I still don't know if this will even solve my P25 to YSF issue.
Ill include the MMDVM Bridge stanza

[DMR Network]

Enable=1

Address=66.42.113.132

Port=62030

Password=passw0rd

ReloadTime=60

Slot=1

TG=6

Base=64000

Relink=60

Debug=0

Id=3155059

UserControl=1

 

Options=XLX:4001


Re: Unable to connect to Brandmeister using HBlink #hblink

Steve N4IRS
 
Edited

I think the issue is if you are configured for repeater (dual slot) and have the transmit and receive frequency the same (simplex) BM will not allow the connect.
This is to block misconfigured duplex hotspots.

Steve N4IRS


Re: Unable to connect to Brandmeister using HBlink #hblink

Matthew 2E0SIP
 

Brandmeister don't allow logins from HBLink and actively drop them, at least on the masters I have tried.


Re: Unable to connect to Brandmeister using HBlink #hblink

David BV3UN
 

Hi ve6gcd 
may i know what is that mean ? "As soon as I changed it to the repeater frequency pair in HBlink I was able to get in" ,i have same problem and i sure i set the same password between BM Self card and hblink 
thanks

1361 - 1380 of 9795