Date   

Re: Switch Between BM and TGIF

Steve N4IRS
 

When you issue a tune command via dvswitch.sh

it's /opt/dvswitch.sh tune passw0rd@...:62031

So your macro would be:

13 = /opt/MMDVM_Bridge/dvswitch.sh tune passw0rd@...:62031



On 2/23/2021 11:49 AM, William WY7WL wrote:

#################################################################

# Tune to a specific TG/Reflector/Server, etc

# Argument 1 is the TG to tune to.  The argument is mode specific.

#################################################################

function tune() {

    if [ $# -eq 0 ]; then

        getABInfoValue last_tune

    else

        remoteControlCommand "txTg=$1"

tune passw0rd@...

    fi

}



Re: Switch Between BM and TGIF

William WY7WL
 
Edited

#################################################################

# Tune to a specific TG/Reflector/Server, etc

# Argument 1 is the TG to tune to.  The argument is mode specific.

#################################################################

function tune() {

    if [ $# -eq 0 ]; then

        getABInfoValue last_tune

    else

        remoteControlCommand "txTg=$1"

tune passw0rd @tgif.network (no space there)

    fi

}


Re: Switch Between BM and TGIF

Steve N4IRS
 

What does your dvswitch.sh command look like?

On 2/23/2021 11:45 AM, William WY7WL wrote:
Whats the line going to look like? I've tried DMR, tune, Tune.... 

I: 2021-02-23 16:43:42.729 USRP packet type: USRP_TYPE_TEXT (WY7WL) -> 3164636

I: 2021-02-23 16:43:48.274 Tune macro: *13 will invoke "/opt/MMDVM_Bridge/dvswitch.sh mode Tune"

I: 2021-02-23 16:43:48.307 Macro result was 65024



Re: Switch Between BM and TGIF

William WY7WL
 

Whats the line going to look like? I've tried DMR, tune, Tune.... 

I: 2021-02-23 16:43:42.729 USRP packet type: USRP_TYPE_TEXT (WY7WL) -> 3164636

I: 2021-02-23 16:43:48.274 Tune macro: *13 will invoke "/opt/MMDVM_Bridge/dvswitch.sh mode Tune"

I: 2021-02-23 16:43:48.307 Macro result was 65024


Re: Switch Between BM and TGIF

William WY7WL
 

Ok thanks Steve, just wanted to be sure I didn't miss something. 


Re: Switch Between BM and TGIF

Steve N4IRS
 

You can create a macro(s).

see /opt/Analog_Bridge/dvsm.macro

On 2/23/2021 10:41 AM, William WY7WL wrote:
Tune command now working via dvswitch.sh! I've been changing between the two networks under the dvs default network menu....

How do I now setup a command via the dvswitch phone app to change networks?


Re: pyUC Client Installation issue

JerryL
 

HI Ken,
Thanks for the reply.  I'm running on the computer installed Mint 18.3, not a virtual machine.  I think I am running with Pulse.  I have not seen ALSA on anything.  I guess you think I should either load ALSA or find how to enable it if it is installed and then disable Pulse.  I am running several audio programs (RX/TX).  None seem to be bothered by Pulse, but I'll give ALSA a try.  It certainly looks like the pyUC Client is worth getting to work.  I want to use that with my Python Server (Installation Guide Appendix E)  loaded on Mint 18.3.  My DVswitch Raspberry/Android installations are working perfectly.  Thanks for your help.  ~Jerry


Re: Switch Between BM and TGIF

William WY7WL
 

Tune command now working via dvswitch.sh! I've been changing between the two networks under the dvs default network menu....

How do I now setup a command via the dvswitch phone app to change networks?


Re: pyUC Client Installation issue

Ken Kayser
 

Hi Jerry,  What hardware platform are you running?  Is Mint running as the base OS or is it a virtual machine?  I believe the issue you are having stems from ALSA not being the primary audio subsystem in your environment.  If you have Pulse Audio running, try disabling it unless you are using it for something else.  There are various posts on how do disable Pulse Audio.  On some systems you can just delete it.  But doing that on Mint is not recommended.  Hope this helps.


pyUC Client Installation issue

JerryL
 

Hi Steve,

I am running Mint 18.3 because that is the last version that can run Allstar's Web Transceiver.  I don't think I'd have a problem if I was running Mint 19 or 20.  They have an more recent version of python from what I understand.

Initially I installed the pyUC Client per pages B-4 & B-5 in the 45 page Installation and User Guide.  I got a 'bs4' module not found error.  Mint 18.3's contains python3.5.  I found where I could install bs4 with the command sudo apt-get install bs4.  After doing that the pyUC Client popped on the screen along with a terminal screen behind it scrolling the following error message:

(the date and time every second plus) - TX thread:read() got an unexpected keyword argument 'exception-on overflow;

I was able to hear very good audio from my Logitech USB headset while connected to 91 World Wide.   However I could not transmit.  Mint 18.3 nor the pyUC Client did not see/recognize the TX microphone in the headset.

Is there a fix for this?

Jerry Long, KB3OIL


For you to look at,

Steve Siesel [K4KSA]
 

 

Steve,

 

No issues here but wanted to pass this screen shot to you with what happens when ASL sends a text message on Key up. It sends that graphic and not my callsign…I just wanted to let you see it and if it is important.

 

 

Steve


Re: after 3 days of searching, I give up. need help #analog_bridge #mmdvm_bridge

Pierre Martel
 

after playing again and again, I decided to redo the rpt, module and iax conf files on the asterisk side. 

it all started to work. 

Now I will have to do some compare of those files to understand what went wrong at first. 

luckily notepad++ will do the compare job easy. 



Le sam. 20 févr. 2021 à 12:21, Steve N4IRS <szingman@...> a écrit :
When traffic passes in either direction it is reflected in the logs. I would look there for clues.

On 2/20/21 12:15 PM, Pierre Martel wrote:
I have a vps that run both allstarlink and dvswitch the install went well and I was able to connect to asl did a link to Hamshack Hotline and all is working. I also have a iaxrpt connection and I can communicate with both asl and HH 
The usrp driver is loaded and my rpt.conf is pretty minimal.  From the dvswitch dashboard I can see that I am connected to the dmr server I want and I have a TG linked. 

If someone talk on DMR I can ear it on asl, iaxrpt and HH and on the dashboard. But the inverse is not true.

 
[53753]
rxchannel = USRP/127.0.0.1:34001:32001
 
duplex = 0                              
 
linktolink = no
linkmongain = 0
erxgain = -3
etxgain = 3
eannmode = 2                          
context = radio
callerid = "Repeater" <53753>
accountcode = RADIO                     
totime = 3000000000
idrecording = |ie
idtalkover = |ie                         
holdofftelem = 0
telemdefault = 0                        
telemdynamic = 0                      
parrotmode = 0
parrottime = 1000
 
[nodes]
 
53753 = radio@....0.1:4569/53753,NONE ; This must be changed to your node number
                                        

I see not error on any of the dvswitch service. 


Re: after 3 days of searching, I give up. need help #analog_bridge #mmdvm_bridge

Steve N4IRS
 

When traffic passes in either direction it is reflected in the logs. I would look there for clues.

On 2/20/21 12:15 PM, Pierre Martel wrote:
I have a vps that run both allstarlink and dvswitch the install went well and I was able to connect to asl did a link to Hamshack Hotline and all is working. I also have a iaxrpt connection and I can communicate with both asl and HH 
The usrp driver is loaded and my rpt.conf is pretty minimal.  From the dvswitch dashboard I can see that I am connected to the dmr server I want and I have a TG linked. 

If someone talk on DMR I can ear it on asl, iaxrpt and HH and on the dashboard. But the inverse is not true.

 
[53753]
rxchannel = USRP/127.0.0.1:34001:32001
 
duplex = 0                              
 
linktolink = no
linkmongain = 0
erxgain = -3
etxgain = 3
eannmode = 2                          
context = radio
callerid = "Repeater" <53753>
accountcode = RADIO                     
totime = 3000000000
idrecording = |ie
idtalkover = |ie                         
holdofftelem = 0
telemdefault = 0                        
telemdynamic = 0                      
parrotmode = 0
parrottime = 1000
 
[nodes]
 
53753 = radio@....0.1:4569/53753,NONE ; This must be changed to your node number
                                        

I see not error on any of the dvswitch service. 


after 3 days of searching, I give up. need help #analog_bridge #mmdvm_bridge

Pierre Martel
 

I have a vps that run both allstarlink and dvswitch the install went well and I was able to connect to asl did a link to Hamshack Hotline and all is working. I also have a iaxrpt connection and I can communicate with both asl and HH 
The usrp driver is loaded and my rpt.conf is pretty minimal.  From the dvswitch dashboard I can see that I am connected to the dmr server I want and I have a TG linked. 

If someone talk on DMR I can ear it on asl, iaxrpt and HH and on the dashboard. But the inverse is not true.

 
[53753]
rxchannel = USRP/127.0.0.1:34001:32001
 
duplex = 0                              
 
linktolink = no
linkmongain = 0
erxgain = -3
etxgain = 3
eannmode = 2                          
context = radio
callerid = "Repeater" <53753>
accountcode = RADIO                     
totime = 3000000000
idrecording = |ie
idtalkover = |ie                         
holdofftelem = 0
telemdefault = 0                        
telemdynamic = 0                      
parrotmode = 0
parrottime = 1000
 
[nodes]
 
53753 = radio@....0.1:4569/53753,NONE ; This must be changed to your node number
                                        

I see not error on any of the dvswitch service. 


Re: P25 to DMR/XLX

Steve N4IRS
 

Kevin,
I don't know what hardware yo are running on, you might consider backing up you Quantar_Bridge.ini and MMDVM_Bridge.ini and trying either the RPi image or the DVSwitch Server install.

Steve N4IRS

On 2/20/21 1:56 AM, Kevin N9OIG wrote:
As an update to this my version of MMDVM Bridge was very old it wouldn't recognize the Options line.


Re: Dashboard change time zone

IK7VXC Mike
 
Edited

Ok, thanks Henrique and Steve I had overlooked the raspi-config. All is well now.


Re: P25 to DMR/XLX

Kevin N9OIG
 

As an update to this my version of MMDVM Bridge was very old it wouldn't recognize the Options line.


Re: Dashboard change time zone

Henrique
 

I change mine via raspi-config, under the menu time zone. Works nice


Re: Dashboard change time zone

Steve N4IRS
 

Do you have the time zone set on your server?

On 2/19/21 5:55 AM, IK7VXC Mike wrote:
Hi. Sorry to bring up a thread which is 2 years old.

So do I have to assume that there are no developments regarding changing the time zone in the dvswitch dashboard?

Mike


Re: Dashboard change time zone

Steve N4IRS
 

Well,
Since the dashboard was released October 31 2020, There have been no developments.

On 2/19/21 5:55 AM, IK7VXC Mike wrote:
Hi. Sorry to bring up a thread which is 2 years old.

So do I have to assume that there are no developments regarding changing the time zone in the dvswitch dashboard?

Mike

1261 - 1280 of 9882