Date   

Re: Another support option

Ian Tulley
 

Hi Jeff, I’m connected now but when I originally hit the INAD icon it took me to this page



Then I had to hit the INAD icon again to take me to where I could select message.
All done now though but thought I should post this on case others get caught.

Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 08:52, Jeff Lehman, N8ACL via groups.io <n8acl@...> wrote:


<PastedGraphic-1.tiff>

This is the iOS app…. Not sure what you are seeing?

Jeff

On Feb 26, 2021, at 4:41 PM, Ian Tulley <ian@...> wrote:

Thanks Jeff, yep tried that but there was no “message”selection. Not sure if it is my iPhone app. I will wait until I can try to join again and give it another go.


Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 08:30, Jeff Lehman, N8ACL via groups.io <n8acl@...> wrote:

Click on the bots picture or name and it will take you to it’s profile then click message, click start and type in your callsign.

Jeff

On Feb 26, 2021, at 4:27 PM, Ian Tulley <ian@...> wrote:

It told me I was locked to read only, could not type anything after that message


Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 08:22, Steve N4IRS <szingman@...> wrote:

 You should send a private message to the bot with just your callsign. You will be able to rejoin in about 10 minutes.

On 2/26/21 4:14 PM, Ian Tulley wrote:
Hi Steve, tried to join, already telegram user, I got the message to send a PM within 10 minutes but where do I send a PM. After the 10 minutes I was removed and my username already has my callsign.
Now if I try to join again it tells me sorry this group is private.




Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 07:21, WD0FYF Gerald <wd0fyf@...> wrote:



I find the troubleshooting process and the tools used to delve into the workings of the machine very educational. I will miss them.

Gerald WD0FYF

On 2/26/2021 8:40 AM, Steve N4IRS wrote:
We have been aware that some of the support e-mails have caused so very large threads with short messages back and forth as I have worked to help a user through a problem. Some users who are subscribed to individual e-mails have been spamed by this and have unsubscribed. Digest subscription will solve this. I have not wanted to move this traffic to private e-mail since the purpose of groups.io is to provide a place where people can find similar issues and resolve them. Going to private e-mail removes the resolution from the forum.

So, we are going to try something different. We have a Telegram group setup Telegram to try to move some of the quick back and forth off groups.io. I will post the resolution on groups.io once we have a resolution.  To keep from having the Telegram room spammed by bots and people, we have implemented a system where you must verify you are a ham to join the room. This is a bot created by Vladimir AC2F and I must say, it's pretty cool. The invite link is Join DVSwitch Telegram group You must be a telegram user to join. There are quite a few ham related rooms. Join us. 

Steve N4IRS

Virus-free. www.avast.com




Re: Another support option

Jeff Lehman, N8ACL
 


This is the iOS app…. Not sure what you are seeing?

Jeff

On Feb 26, 2021, at 4:41 PM, Ian Tulley <ian@...> wrote:

Thanks Jeff, yep tried that but there was no “message”selection. Not sure if it is my iPhone app. I will wait until I can try to join again and give it another go.


Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 08:30, Jeff Lehman, N8ACL via groups.io <n8acl@...> wrote:

Click on the bots picture or name and it will take you to it’s profile then click message, click start and type in your callsign.

Jeff

On Feb 26, 2021, at 4:27 PM, Ian Tulley <ian@...> wrote:

It told me I was locked to read only, could not type anything after that message


Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 08:22, Steve N4IRS <szingman@...> wrote:

 You should send a private message to the bot with just your callsign. You will be able to rejoin in about 10 minutes.

On 2/26/21 4:14 PM, Ian Tulley wrote:
Hi Steve, tried to join, already telegram user, I got the message to send a PM within 10 minutes but where do I send a PM. After the 10 minutes I was removed and my username already has my callsign.
Now if I try to join again it tells me sorry this group is private.




Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 07:21, WD0FYF Gerald <wd0fyf@...> wrote:



I find the troubleshooting process and the tools used to delve into the workings of the machine very educational. I will miss them.

Gerald WD0FYF

On 2/26/2021 8:40 AM, Steve N4IRS wrote:
We have been aware that some of the support e-mails have caused so very large threads with short messages back and forth as I have worked to help a user through a problem. Some users who are subscribed to individual e-mails have been spamed by this and have unsubscribed. Digest subscription will solve this. I have not wanted to move this traffic to private e-mail since the purpose of groups.io is to provide a place where people can find similar issues and resolve them. Going to private e-mail removes the resolution from the forum.

So, we are going to try something different. We have a Telegram group setup Telegram to try to move some of the quick back and forth off groups.io. I will post the resolution on groups.io once we have a resolution.  To keep from having the Telegram room spammed by bots and people, we have implemented a system where you must verify you are a ham to join the room. This is a bot created by Vladimir AC2F and I must say, it's pretty cool. The invite link is Join DVSwitch Telegram group You must be a telegram user to join. There are quite a few ham related rooms. Join us. 

Steve N4IRS

Virus-free. www.avast.com




Re: Another support option

Steve N4IRS
 

I have cleared your account, you can retry.

On 2/26/21 4:41 PM, Ian Tulley wrote:
Thanks Jeff, yep tried that but there was no “message”selection. Not sure if it is my iPhone app. I will wait until I can try to join again and give it another go.


Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 08:30, Jeff Lehman, N8ACL via groups.io <n8acl@...> wrote:

 Click on the bots picture or name and it will take you to it’s profile then click message, click start and type in your callsign.

Jeff

On Feb 26, 2021, at 4:27 PM, Ian Tulley <ian@...> wrote:

It told me I was locked to read only, could not type anything after that message


Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 08:22, Steve N4IRS <szingman@...> wrote:

 You should send a private message to the bot with just your callsign. You will be able to rejoin in about 10 minutes.

On 2/26/21 4:14 PM, Ian Tulley wrote:
Hi Steve, tried to join, already telegram user, I got the message to send a PM within 10 minutes but where do I send a PM. After the 10 minutes I was removed and my username already has my callsign.
Now if I try to join again it tells me sorry this group is private.




Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 07:21, WD0FYF Gerald <wd0fyf@...> wrote:



I find the troubleshooting process and the tools used to delve into the workings of the machine very educational. I will miss them.

Gerald WD0FYF

On 2/26/2021 8:40 AM, Steve N4IRS wrote:
We have been aware that some of the support e-mails have caused so very large threads with short messages back and forth as I have worked to help a user through a problem. Some users who are subscribed to individual e-mails have been spamed by this and have unsubscribed. Digest subscription will solve this. I have not wanted to move this traffic to private e-mail since the purpose of groups.io is to provide a place where people can find similar issues and resolve them. Going to private e-mail removes the resolution from the forum.

So, we are going to try something different. We have a Telegram group setup Telegram to try to move some of the quick back and forth off groups.io. I will post the resolution on groups.io once we have a resolution.  To keep from having the Telegram room spammed by bots and people, we have implemented a system where you must verify you are a ham to join the room. This is a bot created by Vladimir AC2F and I must say, it's pretty cool. The invite link is Join DVSwitch Telegram group You must be a telegram user to join. There are quite a few ham related rooms. Join us. 

Steve N4IRS

Virus-free. www.avast.com




Re: Another support option

Ian Tulley
 

Thanks Jeff, yep tried that but there was no “message”selection. Not sure if it is my iPhone app. I will wait until I can try to join again and give it another go.


Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 08:30, Jeff Lehman, N8ACL via groups.io <n8acl@...> wrote:

Click on the bots picture or name and it will take you to it’s profile then click message, click start and type in your callsign.

Jeff

On Feb 26, 2021, at 4:27 PM, Ian Tulley <ian@...> wrote:

It told me I was locked to read only, could not type anything after that message


Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 08:22, Steve N4IRS <szingman@...> wrote:

 You should send a private message to the bot with just your callsign. You will be able to rejoin in about 10 minutes.

On 2/26/21 4:14 PM, Ian Tulley wrote:
Hi Steve, tried to join, already telegram user, I got the message to send a PM within 10 minutes but where do I send a PM. After the 10 minutes I was removed and my username already has my callsign.
Now if I try to join again it tells me sorry this group is private.




Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 07:21, WD0FYF Gerald <wd0fyf@...> wrote:



I find the troubleshooting process and the tools used to delve into the workings of the machine very educational. I will miss them.

Gerald WD0FYF

On 2/26/2021 8:40 AM, Steve N4IRS wrote:
We have been aware that some of the support e-mails have caused so very large threads with short messages back and forth as I have worked to help a user through a problem. Some users who are subscribed to individual e-mails have been spamed by this and have unsubscribed. Digest subscription will solve this. I have not wanted to move this traffic to private e-mail since the purpose of groups.io is to provide a place where people can find similar issues and resolve them. Going to private e-mail removes the resolution from the forum.

So, we are going to try something different. We have a Telegram group setup Telegram to try to move some of the quick back and forth off groups.io. I will post the resolution on groups.io once we have a resolution.  To keep from having the Telegram room spammed by bots and people, we have implemented a system where you must verify you are a ham to join the room. This is a bot created by Vladimir AC2F and I must say, it's pretty cool. The invite link is Join DVSwitch Telegram group You must be a telegram user to join. There are quite a few ham related rooms. Join us. 

Steve N4IRS

Virus-free. www.avast.com



Re: Another support option

Jeff Lehman, N8ACL
 

Click on the bots picture or name and it will take you to it’s profile then click message, click start and type in your callsign.

Jeff

On Feb 26, 2021, at 4:27 PM, Ian Tulley <ian@...> wrote:

It told me I was locked to read only, could not type anything after that message


Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 08:22, Steve N4IRS <szingman@...> wrote:

 You should send a private message to the bot with just your callsign. You will be able to rejoin in about 10 minutes.

On 2/26/21 4:14 PM, Ian Tulley wrote:
Hi Steve, tried to join, already telegram user, I got the message to send a PM within 10 minutes but where do I send a PM. After the 10 minutes I was removed and my username already has my callsign.
Now if I try to join again it tells me sorry this group is private.




Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 07:21, WD0FYF Gerald <wd0fyf@...> wrote:



I find the troubleshooting process and the tools used to delve into the workings of the machine very educational. I will miss them.

Gerald WD0FYF

On 2/26/2021 8:40 AM, Steve N4IRS wrote:
We have been aware that some of the support e-mails have caused so very large threads with short messages back and forth as I have worked to help a user through a problem. Some users who are subscribed to individual e-mails have been spamed by this and have unsubscribed. Digest subscription will solve this. I have not wanted to move this traffic to private e-mail since the purpose of groups.io is to provide a place where people can find similar issues and resolve them. Going to private e-mail removes the resolution from the forum.

So, we are going to try something different. We have a Telegram group setup Telegram to try to move some of the quick back and forth off groups.io. I will post the resolution on groups.io once we have a resolution.  To keep from having the Telegram room spammed by bots and people, we have implemented a system where you must verify you are a ham to join the room. This is a bot created by Vladimir AC2F and I must say, it's pretty cool. The invite link is Join DVSwitch Telegram group You must be a telegram user to join. There are quite a few ham related rooms. Join us. 

Steve N4IRS

Virus-free. www.avast.com



Re: Another support option

Ian Tulley
 

It told me I was locked to read only, could not type anything after that message


Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 08:22, Steve N4IRS <szingman@...> wrote:

 You should send a private message to the bot with just your callsign. You will be able to rejoin in about 10 minutes.

On 2/26/21 4:14 PM, Ian Tulley wrote:
Hi Steve, tried to join, already telegram user, I got the message to send a PM within 10 minutes but where do I send a PM. After the 10 minutes I was removed and my username already has my callsign.
Now if I try to join again it tells me sorry this group is private.




Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 07:21, WD0FYF Gerald <wd0fyf@...> wrote:



I find the troubleshooting process and the tools used to delve into the workings of the machine very educational. I will miss them.

Gerald WD0FYF

On 2/26/2021 8:40 AM, Steve N4IRS wrote:
We have been aware that some of the support e-mails have caused so very large threads with short messages back and forth as I have worked to help a user through a problem. Some users who are subscribed to individual e-mails have been spamed by this and have unsubscribed. Digest subscription will solve this. I have not wanted to move this traffic to private e-mail since the purpose of groups.io is to provide a place where people can find similar issues and resolve them. Going to private e-mail removes the resolution from the forum.

So, we are going to try something different. We have a Telegram group setup Telegram to try to move some of the quick back and forth off groups.io. I will post the resolution on groups.io once we have a resolution.  To keep from having the Telegram room spammed by bots and people, we have implemented a system where you must verify you are a ham to join the room. This is a bot created by Vladimir AC2F and I must say, it's pretty cool. The invite link is Join DVSwitch Telegram group You must be a telegram user to join. There are quite a few ham related rooms. Join us. 

Steve N4IRS

Virus-free. www.avast.com


Re: Another support option

Steve N4IRS
 

You should send a private message to the bot with just your callsign. You will be able to rejoin in about 10 minutes.

On 2/26/21 4:14 PM, Ian Tulley wrote:
Hi Steve, tried to join, already telegram user, I got the message to send a PM within 10 minutes but where do I send a PM. After the 10 minutes I was removed and my username already has my callsign.
Now if I try to join again it tells me sorry this group is private.




Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 07:21, WD0FYF Gerald <wd0fyf@...> wrote:



I find the troubleshooting process and the tools used to delve into the workings of the machine very educational. I will miss them.

Gerald WD0FYF

On 2/26/2021 8:40 AM, Steve N4IRS wrote:
We have been aware that some of the support e-mails have caused so very large threads with short messages back and forth as I have worked to help a user through a problem. Some users who are subscribed to individual e-mails have been spamed by this and have unsubscribed. Digest subscription will solve this. I have not wanted to move this traffic to private e-mail since the purpose of groups.io is to provide a place where people can find similar issues and resolve them. Going to private e-mail removes the resolution from the forum.

So, we are going to try something different. We have a Telegram group setup Telegram to try to move some of the quick back and forth off groups.io. I will post the resolution on groups.io once we have a resolution.  To keep from having the Telegram room spammed by bots and people, we have implemented a system where you must verify you are a ham to join the room. This is a bot created by Vladimir AC2F and I must say, it's pretty cool. The invite link is Join DVSwitch Telegram group You must be a telegram user to join. There are quite a few ham related rooms. Join us. 

Steve N4IRS

Virus-free. www.avast.com


Re: Another support option

Ian Tulley
 

Hi Steve, tried to join, already telegram user, I got the message to send a PM within 10 minutes but where do I send a PM. After the 10 minutes I was removed and my username already has my callsign.
Now if I try to join again it tells me sorry this group is private.




Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 27 Feb 2021, at 07:21, WD0FYF Gerald <wd0fyf@...> wrote:



I find the troubleshooting process and the tools used to delve into the workings of the machine very educational. I will miss them.

Gerald WD0FYF

On 2/26/2021 8:40 AM, Steve N4IRS wrote:
We have been aware that some of the support e-mails have caused so very large threads with short messages back and forth as I have worked to help a user through a problem. Some users who are subscribed to individual e-mails have been spamed by this and have unsubscribed. Digest subscription will solve this. I have not wanted to move this traffic to private e-mail since the purpose of groups.io is to provide a place where people can find similar issues and resolve them. Going to private e-mail removes the resolution from the forum.

So, we are going to try something different. We have a Telegram group setup Telegram to try to move some of the quick back and forth off groups.io. I will post the resolution on groups.io once we have a resolution.  To keep from having the Telegram room spammed by bots and people, we have implemented a system where you must verify you are a ham to join the room. This is a bot created by Vladimir AC2F and I must say, it's pretty cool. The invite link is Join DVSwitch Telegram group You must be a telegram user to join. There are quite a few ham related rooms. Join us. 

Steve N4IRS

Virus-free. www.avast.com


Re: Another support option

WD0FYF Gerald
 

I find the troubleshooting process and the tools used to delve into the workings of the machine very educational. I will miss them.

Gerald WD0FYF

On 2/26/2021 8:40 AM, Steve N4IRS wrote:
We have been aware that some of the support e-mails have caused so very large threads with short messages back and forth as I have worked to help a user through a problem. Some users who are subscribed to individual e-mails have been spamed by this and have unsubscribed. Digest subscription will solve this. I have not wanted to move this traffic to private e-mail since the purpose of groups.io is to provide a place where people can find similar issues and resolve them. Going to private e-mail removes the resolution from the forum.

So, we are going to try something different. We have a Telegram group setup Telegram to try to move some of the quick back and forth off groups.io. I will post the resolution on groups.io once we have a resolution.  To keep from having the Telegram room spammed by bots and people, we have implemented a system where you must verify you are a ham to join the room. This is a bot created by Vladimir AC2F and I must say, it's pretty cool. The invite link is Join DVSwitch Telegram group You must be a telegram user to join. There are quite a few ham related rooms. Join us. 

Steve N4IRS

Virus-free. www.avast.com


Re: Update and upgrade errors

Steve N4IRS
 

apt install dvswitch-quantar will install dvswitch-base, mmdvm-bridge, quantar-bridge, p25gateway, p25parrot
or,
apt install mmdvm-bridge quantar-bridge

There should be a /opt/Quantar_Bridge directory





On 2/26/21 10:59 AM, Kevin N9OIG wrote:
pi@raspberrypi:~ $ sudo apt remove MMDVM_Bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package MMDVM_Bridge
pi@raspberrypi:~ $ There isnt a Quantar_Bridge directory.


Re: Update and upgrade errors

Kevin N9OIG
 

pi@raspberrypi:~ $ sudo apt remove MMDVM_Bridge
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package MMDVM_Bridge
pi@raspberrypi:~ $

There isnt a Quantar_Bridge directory.


Re: Another support option

Mike KB8JNM
 

While I may be alone, I do not support using a 3rd party service for our forums.


I have since the beginning 'MUTE THIS TOPIC' when the back and forth short messages overload my email.

But never unsubscribe.  And I am subscribed to all forums.


On 2/26/2021 9:40 AM, Steve N4IRS wrote:
We have been aware that some of the support e-mails have caused so very large threads with short messages back and forth as I have worked to help a user through a problem. Some users who are subscribed to individual e-mails have been spamed by this and have unsubscribed. Digest subscription will solve this. I have not wanted to move this traffic to private e-mail since the purpose of groups.io is to provide a place where people can find similar issues and resolve them. Going to private e-mail removes the resolution from the forum.

So, we are going to try something different. We have a Telegram group setup Telegram to try to move some of the quick back and forth off groups.io. I will post the resolution on groups.io once we have a resolution.  To keep from having the Telegram room spammed by bots and people, we have implemented a system where you must verify you are a ham to join the room. This is a bot created by Vladimir AC2F and I must say, it's pretty cool. The invite link is Join DVSwitch Telegram group You must be a telegram user to join. There are quite a few ham related rooms. Join us. 

Steve N4IRS


Another support option

Steve N4IRS
 

We have been aware that some of the support e-mails have caused so very large threads with short messages back and forth as I have worked to help a user through a problem. Some users who are subscribed to individual e-mails have been spamed by this and have unsubscribed. Digest subscription will solve this. I have not wanted to move this traffic to private e-mail since the purpose of groups.io is to provide a place where people can find similar issues and resolve them. Going to private e-mail removes the resolution from the forum.

So, we are going to try something different. We have a Telegram group setup Telegram to try to move some of the quick back and forth off groups.io. I will post the resolution on groups.io once we have a resolution.  To keep from having the Telegram room spammed by bots and people, we have implemented a system where you must verify you are a ham to join the room. This is a bot created by Vladimir AC2F and I must say, it's pretty cool. The invite link is Join DVSwitch Telegram group You must be a telegram user to join. There are quite a few ham related rooms. Join us. 

Steve N4IRS


Re: pyUC Client Installation issue

Ed Liddle
 

I installed it on Ubuntu and ran into the same problem. This should help with mint.
https://www.crummy.com/software/BeautifulSoup/bs4/doc/

If you’re using a recent version of Debian or Ubuntu Linux, you can install Beautiful Soup with the system package manager:

$ apt-get install python-bs4 (for Python 2)

$ apt-get install python3-bs4 (for Python 3)

73,

Ed


On Thu, Feb 25, 2021, 18:09 Mike Zingman - N4IRR <mike.zingman@...> wrote:
All python code is open source. The pyaudio module witten in C /C++ is on git. Sorry I do not have the link on hand. When pyaudio was written ALSA was the standard audio subsystem. But many distros have moved on. 

A quick Google search finds a pyaudio alternative as: 
https://python-sounddevice.readthedocs.io/en/0.4.1/
But I have not looked into it as a replacement. 

Mike


Re: pyUC Client Installation issue

Mike Zingman - N4IRR
 

All python code is open source. The pyaudio module witten in C /C++ is on git. Sorry I do not have the link on hand. When pyaudio was written ALSA was the standard audio subsystem. But many distros have moved on. 

A quick Google search finds a pyaudio alternative as: 
https://python-sounddevice.readthedocs.io/en/0.4.1/
But I have not looked into it as a replacement. 

Mike


Re: pyUC Client Installation issue

JerryL
 

Hi Ken,
Thanks for another reply.  I've looked for a way to make ALSA my default rather than Pulse and not found it.  Sometimes looking for Web help on Linux is painful.  You get lots of different suggestions, some involving pages of code, conflicting suggestions, or lots of stuff that others say doesn't work, etc.  I just don't know enough about Linux to figure out what I should be doing.  However, I have read Steve's message about hUC running through HTML.  That seems like it's going to be the path of the least resistance for now.  Hurrah to Steve N4IRS and others that are putting all this wonderful software together.

I also have been looking inside pyUC.py for an answer.  There seems to be an answer somewhere in their code.   I don't know if you've ventured inside that one or the pyUC.ini file.  The comments following the code are very well documented and are clear enough to understand.  What I'd really like to do is take a look inside the installed 'python-pyaudio' file, but I couldn't find where it is hidden. 

Oh well, I'm waiting for the hUC.  Thanks for your help.

Jerry, KB3OIL


Re: Update and upgrade errors

Steve N4IRS
 

You can try this:
BACKUP your /opt/MMDVM_Bridge directory and your /opt/Quantar_Bridge directory.
apt remove MMDVM_Bridge
apt install -f
apt install mmdvm-bridge
copy your the MMDVM_Bridge.ini and DVSwitch.ini from your backup to /opt/MMDVM_Bridge
restart MMDVM_Bridge


Re: Update and upgrade errors

Steve N4IRS
 
Edited

I answered you days ago. I can continue to try to help fix your install or you archive your QB and MB configs and use the current install process. From that point forward, upgrade will be apt upgrade.
 Though I don't see my answer. Sorry.


On 2/25/2021 11:11 AM, Kevin N9OIG wrote:
Nothing?


Re: Update and upgrade errors

Kevin N9OIG
 

Nothing?


HTML client and Analog Reflector release information

Steve N4IRS
 
Edited

Over the past few months we have been working on the release of the HTML client (hUC) for DVSwitch. This is new server component called Analog_Reflector (AR). The purpose of AR is to server the HTML client to users connecting to the server. AR also provides a number of feature for people building bridges Most of the basic features are covered in my post  <https://dvswitch.groups.io/g/main/message/8120>

On Monday March 1st we will make available the Analog_Reflector Release Candidate 1. Though we have had a number of people and groups testing AR, we feel it's time to broaden the base of users testing AR. We expect some issues to arise. We also expect people will try to use AR in a way we had not thought of. We welcome comments and bug reports. That is the purpose of a Release Candidate. I do not know what platforms will be initially supported. That is being worked on now. We do not know how many release candidates there will be before full release. That will depend on the feedback and any issues we observe. The releae candidate will have all features available to be configured.

Between now and Monday we want to start the process of giving users access to a way to sample the features of AR and hUC. We have setup a publicly accessible installation so that any user can try things out. This install will allow anyone to connect to the server and look at the features. You can listen to traffic happening on the reflector in real time. The server is configured for DMR, D-Star, YSF, P25 and AllStar. All digital modes are TG and Master agile. The AllStar Mode is connected to AllStarLink node 2150. That node can be connected to any active AllStar node. By design, this is a shared resource, If I change modes to DMR and change to TG 3166, all connected clients are also connected DMR 3166. If you login with your callsign, you can look around, you can try some things out. What you CAN'T do is transmit and tune. You are a guest. A basic rule of thumb is, if the button is greyed out, it is not available to a guest.

We have setup yet another sub group for discussion <https://dvswitch.groups.io/g/Analog-Reflector>

OK, so you have read all the stuff above, where is it?  <https://allstar.dvswitch.org> When you first connect, you will be asked for your callsign. Since you do not have an account on the server, you will not be asked for a password. In the top right hand corner you will see:



Click on the icon to enable audio. The icon will change to



You are in and listening. There are about a half dozen authenticated users, we will try to move around to demo different modes etc. One thing you can do is send a test to everybody currently connected to the reflector. Go to the Manage tab. You will see the Text Message button. Click on the button and type your message. You can request someone change to a mode and TG. If someone is available they can change modes and TG for you.

One other area of interest is the current documentation. The first entry on the support tab will open a PDF with the current documentation.

Kick the tires, comment in the AR subgroup. Have fun.

For DVSwitch,
Steve N4IRS

1221 - 1240 of 9883