1. main@DVSwitch.groups.io
  2. Messages
   Date   
Re: Yaesu System Fusion 2 DMR

Matthew Pitts N8OHU
 

Peter,

The answer is "it depends". Most bridged Fusion to DMR works without AMBE simply because the DN Fusion uses the same version of the vocoder as DMR.

Matthew Pitts
N8OHU

On February 26, 2018 7:54:03 PM EST, G7RPG - Peter Kendall <g7rpg@hotmail.com> wrote:
Hi Steve,

I realised that about 1ms after I clicked the send button. Was worried
about going off topic.

The question is...

Could YSF2DMR be used to link the ASL<>BM to YSF without needing
another
ambe ?

73
Peter


On 27/02/18 00:25, Steve N4IRS wrote:
Peter, you went on the list, but the discussion is welcome here.

Steve

On 02/26/2018 07:22 PM, G7RPG - Peter Kendall wrote:
Hi Peter,

Hope you don't mind me contacting you direct.

I wonder if I could pick your brains on the subject of YSF2DMR ?


73
Peter
G7RPG


On 25/02/18 00:13, Peter M0NWI wrote:
Cort, Steve, Mike,

Have you seen Andy's work on the YSF2DMR module For MMDVM, wonder
if
it would fit with the philosophy of DVSwitch as another partner?

From the readme, it seems to covert on the fly both ways between
the 2 modes, in software without need of a dongle?

Worth a look?

https://github.com/juribeparada/YSF2DMR

73,
Peter
M0NWI
Re: Yaesu System Fusion 2 DMR

G7RPG - Peter Kendall
 

Hi Steve,

I realised that about 1ms after I clicked the send button. Was worried
about going off topic.

The question is...

Could YSF2DMR be used to link the ASL<>BM to YSF without needing another
ambe ?

73
Peter

On 27/02/18 00:25, Steve N4IRS wrote:
Peter, you went on the list, but the discussion is welcome here.

Steve

On 02/26/2018 07:22 PM, G7RPG - Peter Kendall wrote:
Hi Peter,

Hope you don't mind me contacting you direct.

I wonder if I could pick your brains on the subject of YSF2DMR ?


73
Peter
G7RPG


On 25/02/18 00:13, Peter M0NWI wrote:
Cort, Steve, Mike,

Have you seen Andy's work on the YSF2DMR module For MMDVM, wonder if
it would fit with the philosophy of DVSwitch as another partner?

From the readme, it seems to covert on the fly both ways between
the 2 modes, in software without need of a dongle?

Worth a look?

https://github.com/juribeparada/YSF2DMR

73,
Peter
M0NWI
Re: Yaesu System Fusion 2 DMR

Steve N4IRS
 

Peter, you went on the list, but the discussion is welcome here.

Steve

On 02/26/2018 07:22 PM, G7RPG - Peter Kendall wrote:
Hi Peter,

Hope you don't mind me contacting you direct.

I wonder if I could pick your brains on the subject of YSF2DMR ?


73
Peter
G7RPG


On 25/02/18 00:13, Peter M0NWI wrote:
Cort, Steve, Mike,

Have you seen Andy's work on the YSF2DMR module For MMDVM, wonder if it would fit with the philosophy of DVSwitch as another partner?

From the readme, it seems to covert on the fly both ways between the 2 modes, in software without need of a dongle?
Worth a look?

https://github.com/juribeparada/YSF2DMR

73,
Peter
M0NWI
Re: Yaesu System Fusion 2 DMR

G7RPG - Peter Kendall
 

Hi Peter,

Hope you don't mind me contacting you direct.

I wonder if I could pick your brains on the subject of YSF2DMR ?


73
Peter
G7RPG

On 25/02/18 00:13, Peter M0NWI wrote:
Cort, Steve, Mike,

Have you seen Andy's work on the YSF2DMR module For MMDVM, wonder if it would fit with the philosophy of DVSwitch as another partner?

From the readme, it seems to covert on the fly both ways between the 2 modes, in software without need of a dongle?
Worth a look?

https://github.com/juribeparada/YSF2DMR

73,
Peter
M0NWI
Re: DMRMonitor

Dylan KI7SBI
 


On Sun, Feb 25, 2018 at 8:21 AM, <f4ewi@...> wrote:
I am looking for a solution for monitoring all the trafic on HBLink and in the futur DMRlink lke : http://www.opendmr.net/monitor.php


KI7TRR Casey put this together, based on parsing log files from HB_Bridge and ISPC_Bridge.
DMRMonitor

Thierry F4EWI
 

I am looking for a solution for monitoring all the trafic on HBLink and in the futur DMRlink lke : http://www.opendmr.net/monitor.php
Must i use DMR Monitor ?

73's
Thierry - F4EWI
Re: MMMDVM repeaters with HBLink

Thierry F4EWI
 

It's OK -> Password problem !!!

Important  : Jitter=0 in the MMDVM.ini file for the local tests
Re: MMMDVM repeaters with HBLink

Steve N4IRS
 

Depends on the entries you have in the [LOGGER] stanza

On 02/25/2018 07:44 AM, f4ewi@... wrote:
Thank you it's OK now !

My MMDVM repeater don't want to connecting to the server. Is there a log file to analyse what happened?

73, Thierry F4EWI

Re: MMMDVM repeaters with HBLink

Thierry F4EWI
 

Thank you it's OK now !

My MMDVM repeater don't want to connecting to the server. Is there a log file to analyse what happened?

73, Thierry F4EWI
Re: MMMDVM repeaters with HBLink

Steve N4IRS
 

If you are building a Master that a MMDVM repeater can connect to, you do not need to enable a client. Disable the client in [REPEATER-1]

73, Steve N4IRS

On 02/25/2018 06:43 AM, f4ewi@... wrote:
Ok it's better now!
For my tests i have on the same network the HBLink server and one MMDVM repeater. My HBLink file is :

[MASTER-1]
MODE: MASTER
ENABLED: True
REPEAT: True
EXPORT_AMBE: False
IP:192.168.2.104
PORT: 54000
PASSPHRASE: s3cr37w0rd
GROUP_HANGTIME: 5

and for the client

[REPEATER-1]
MODE: CLIENT
ENABLED: True
EXPORT_AMBE: False
IP:192.168.2.101
# PORT: 54001
PORT: 54000
MASTER_IP: 192.168.2.104
MASTER_PORT: 54000
PASSPHRASE: homebrew
CALLSIGN: F4GVT/R
RADIO_ID: 208980
RX_FREQ: 430525000
TX_FREQ: 439925000
TX_POWER: 10
COLORCODE: 1
SLOTS: 1  => mean only one TS available??

and I have the following error message :

odroid@odroid:/opt/HBlink$ python hblink.py
DEBUG 2018-02-25 09:52:50,305 Logging system started, anything from here on gets logged
INFO 2018-02-25 09:52:50,305 HBlink 'HBlink.py' (c) 2016 N0MJS & the K0USY Group - SYSTEM STARTING...
DEBUG 2018-02-25 09:52:50,306 (MASTER-1) Master maintenance loop started
DEBUG 2018-02-25 09:52:50,307 MASTER instance created: MASTER-1, <__main__.HBSYSTEM instance at 0xb5f3b1c0>
Traceback (most recent call last):
  File "hblink.py", line 519, in <module>
    reactor.listenUDP(CONFIG['SYSTEMS'][system]['PORT'], systems[system], interface=CONFIG['SYSTEMS'][system]['IP'])
  File "/usr/local/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 369, in listenUDP
    p.startListening()
  File "/usr/local/lib/python2.7/dist-packages/twisted/internet/udp.py", line 178, in startListening
    self._bindSocket()
  File "/usr/local/lib/python2.7/dist-packages/twisted/internet/udp.py", line 198, in _bindSocket
    raise error.CannotListenError(self.interface, self.port, le)
twisted.internet.error.CannotListenError: Couldn't listen on 192.168.2.101:54000: [Errno 99] Cannot assign requested address.
odroid@odroid:/opt/HBlink$ 
 
Re: MMMDVM repeaters with HBLink

Thierry F4EWI
 

Ok it's better now!
For my tests i have on the same network the HBLink server and one MMDVM repeater. My HBLink file is :

[MASTER-1]
MODE: MASTER
ENABLED: True
REPEAT: True
EXPORT_AMBE: False
IP:192.168.2.104
PORT: 54000
PASSPHRASE: s3cr37w0rd
GROUP_HANGTIME: 5

and for the client

[REPEATER-1]
MODE: CLIENT
ENABLED: True
EXPORT_AMBE: False
IP:192.168.2.101
# PORT: 54001
PORT: 54000
MASTER_IP: 192.168.2.104
MASTER_PORT: 54000
PASSPHRASE: homebrew
CALLSIGN: F4GVT/R
RADIO_ID: 208980
RX_FREQ: 430525000
TX_FREQ: 439925000
TX_POWER: 10
COLORCODE: 1
SLOTS: 1  => mean only one TS available??

and I have the following error message :

odroid@odroid:/opt/HBlink$ python hblink.py
DEBUG 2018-02-25 09:52:50,305 Logging system started, anything from here on gets logged
INFO 2018-02-25 09:52:50,305 HBlink 'HBlink.py' (c) 2016 N0MJS & the K0USY Group - SYSTEM STARTING...
DEBUG 2018-02-25 09:52:50,306 (MASTER-1) Master maintenance loop started
DEBUG 2018-02-25 09:52:50,307 MASTER instance created: MASTER-1, <__main__.HBSYSTEM instance at 0xb5f3b1c0>
Traceback (most recent call last):
  File "hblink.py", line 519, in <module>
    reactor.listenUDP(CONFIG['SYSTEMS'][system]['PORT'], systems[system], interface=CONFIG['SYSTEMS'][system]['IP'])
  File "/usr/local/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 369, in listenUDP
    p.startListening()
  File "/usr/local/lib/python2.7/dist-packages/twisted/internet/udp.py", line 178, in startListening
    self._bindSocket()
  File "/usr/local/lib/python2.7/dist-packages/twisted/internet/udp.py", line 198, in _bindSocket
    raise error.CannotListenError(self.interface, self.port, le)
twisted.internet.error.CannotListenError: Couldn't listen on 192.168.2.101:54000: [Errno 99] Cannot assign requested address.
odroid@odroid:/opt/HBlink$ 
 
Yaesu System Fusion 2 DMR

Peter M0NWI
 

Cort, Steve, Mike,

Have you seen Andy's work on the YSF2DMR module For MMDVM, wonder if it would fit with the philosophy of DVSwitch as another partner?

From the readme, it seems to covert on the fly both ways between the 2 modes, in software without need of a dongle?

Worth a look?

https://github.com/juribeparada/YSF2DMR

73,
Peter
M0NWI
Re: MMMDVM repeaters with HBLink

Cort N0MJS <n0mjs@...>
 

It’s for Python 2.7, not Python 3

On Feb 24, 2018, at 4:11 PM, f4ewi@... wrote:

hello,
I would to test a new solution for MMDVM repeaters.
In first must i use HBLink or HB_Bridge? What is the difference?
For my tests I install HBLink but when I start the program I have the following error message :

odroid@odroid:/opt/HBlink$ python3 hblink.py
  File "hblink.py", line 205
    def master_datagramReceived(self, _data, (_host, _port)):
                                                         ^
SyntaxError: invalid syntax

an idea ?
73's
Thierry F4EWI

--
Cort Buffington
H: +1-785-813-1501
M: +1-785-865-7206
MMMDVM repeaters with HBLink

Thierry F4EWI
 

hello,
I would to test a new solution for MMDVM repeaters.
In first must i use HBLink or HB_Bridge? What is the difference?
For my tests I install HBLink but when I start the program I have the following error message :

odroid@odroid:/opt/HBlink$ python3 hblink.py
  File "hblink.py", line 205
    def master_datagramReceived(self, _data, (_host, _port)):
                                                         ^
SyntaxError: invalid syntax

an idea ?
73's
Thierry F4EWI
Re: ASL - Analog - HB Bridge help please

Lito - WI6Y
 

That would be great.

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Friday, February 16, 2018 6:55 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] ASL - Analog - HB Bridge help please
 
Do I need to post a set of "working" config files for a BM <---> ASL bridge in the files section.
I THOUGHT the default files work except for login and IDs

Steve

On 2/16/2018 9:45 AM, Eric N0NKI wrote:
Hello Michel,

I like Chris and many others would be interested in configuration files and any other information about your project.

73 - Thank you
  NØNKI - Eric

On Fri, Feb 16, 2018 at 8:43 AM, F1TZO - Michel <michel@...> wrote:
Hi Chris

Of course I'll share this.
A short version before the Word Mobile Congress un Barcelona, because I run after time ;-)
Do you want config files ?

73'

Michel - F1TZO
Sent from my smartphone
Le 16 févr. 2018, à 01:09, "Chris Andrist, KC7WSU" <chris.andrist@...> a écrit:
Michel,

Can you share what you did with the rest of us?

—
Regards,

Chris Andrist, KC7WSU
DMR-UTAH

On Feb 15, 2018, at 5:02 PM, F1TZO - Michel < michel@...> wrote:

Done !!!

Everything in working !

Thanks Steve for your help and for your work !

I launch in test just a few minutes ago the "French Open Networks" with all gateway : Analog/DMR/C4FM/DStar
It's done because you (Steve), Jonathan (G4KLX), Andy (CA6JAU) and Rudy (PD0ZRY) provide cool software and nice work and help.

Thanks to all of you

Michel - F1TZO


[New post] XC-3006 Moves to Production

John Hays - K7VE / WRJT-215
 


k7udr posted: "We have 26 orders on the books, so we are moving to production. We will continue to accept orders until the end of February. We should be shipping in April. This will not be a stock item, we are building to order only. There will only be a future build"

New post on NW Digital Radio

XC-3006 Moves to Production

by k7udr

We have 26 orders on the books, so we are moving to production. We will continue to accept orders until the end of February. We should be shipping in April.

This will not be a stock item, we are building to order only. There will only be a future build if we reach sufficient numbers again, so if you are interested, now is the time to place an order.

We want to thank again the XLX team for "Putting the Amateurs back in Amateur Radio" by providing their transcoding solution.

 

k7udr | February 16, 2018 at 7:24 am | Categories: AMBE, D-STAR, Fusion | URL: https://wp.me/p2mAAP-1bj


Trouble clicking? Copy and paste this URL into your browser:
http://nwdigitalradio.com/xc-3006-moves-to-production/





--

John D. Hays
Edmonds, WA
K7VE

   
Re: ASL - Analog - HB Bridge help please

Steve N4IRS
 

Michel,
Your English is fine and MUCH better then my French. Yes, anytime you split up among a number of hosts, it gets a little more complex. We are also changing Analog_Bridge.ini to use a clearer format for host and port. 127.0.0.1:31000 I will continue to work on the comments in the config files to help people get up and running quicker. Some error checking is being included so that people get warned if the repeater ID and the user ID are the same (a common error)

73, Steve N4IRS

On 2/16/2018 11:36 AM, F1TZO - Michel wrote:
Hi Steve,

You are totally right ! the config files are fine and the comments include are clear.
The 3 issues I had was :
    - ID for the repeater need to be different from the user ID , and thanks for the solition to add "1" before the user ID to do a Fake ID who work fine.
    - I use 2 VM : First for AllStar, second for HB_Bridge and Analog_Bridge. My issue was in "rpt.conf" : to use the USRP, the right IPaddress is the IP  where Analog_Bridge is running, I was using local IP.
    - With BM : Need to access to the selfcare to add static routing for the used TG.

I really have to thanks you Steve, I appreciated your softs, how their include comments, and your kindless to answer questions.
In few time I was able to build and running the systems !

If I can help in return, I'll be a pleasure

Kind regards

Michel - F1TZO
(I hope my English is not to bad ;-) )
-------

Le 16/02/2018 à 15:55, Steve N4IRS a écrit :
Do I need to post a set of "working" config files for a BM <---> ASL bridge in the files section.
I THOUGHT the default files work except for login and IDs

Steve

On 2/16/2018 9:45 AM, Eric N0NKI wrote:
Hello Michel,

I like Chris and many others would be interested in configuration files and any other information about your project.

73 - Thank you
  NØNKI - Eric

On Fri, Feb 16, 2018 at 8:43 AM, F1TZO - Michel <michel@...> wrote:
Hi Chris

Of course I'll share this.
A short version before the Word Mobile Congress un Barcelona, because I run after time ;-)
Do you want config files ?

73'

Michel - F1TZO
Sent from my smartphone
Le 16 févr. 2018, à 01:09, "Chris Andrist, KC7WSU" <chris.andrist@...> a écrit:
Michel,

Can you share what you did with the rest of us?

—
Regards,

Chris Andrist, KC7WSU
DMR-UTAH

On Feb 15, 2018, at 5:02 PM, F1TZO - Michel < michel@...> wrote:

Done !!!

Everything in working !

Thanks Steve for your help and for your work !

I launch in test just a few minutes ago the "French Open Networks" with all gateway : Analog/DMR/C4FM/DStar
It's done because you (Steve), Jonathan (G4KLX), Andy (CA6JAU) and Rudy (PD0ZRY) provide cool software and nice work and help.

Thanks to all of you

Michel - F1TZO




Re: ASL - Analog - HB Bridge help please

F1TZO - Michel
 

Hi Steve,

You are totally right ! the config files are fine and the comments include are clear.
The 3 issues I had was :
    - ID for the repeater need to be different from the user ID , and thanks for the solition to add "1" before the user ID to do a Fake ID who work fine.
    - I use 2 VM : First for AllStar, second for HB_Bridge and Analog_Bridge. My issue was in "rpt.conf" : to use the USRP, the right IPaddress is the IP  where Analog_Bridge is running, I was using local IP.
    - With BM : Need to access to the selfcare to add static routing for the used TG.

I really have to thanks you Steve, I appreciated your softs, how their include comments, and your kindless to answer questions.
In few time I was able to build and running the systems !

If I can help in return, I'll be a pleasure

Kind regards

Michel - F1TZO
(I hope my English is not to bad ;-) )
-------

Le 16/02/2018 à 15:55, Steve N4IRS a écrit :
Do I need to post a set of "working" config files for a BM <---> ASL bridge in the files section.
I THOUGHT the default files work except for login and IDs

Steve

On 2/16/2018 9:45 AM, Eric N0NKI wrote:
Hello Michel,

I like Chris and many others would be interested in configuration files and any other information about your project.

73 - Thank you
  NØNKI - Eric

On Fri, Feb 16, 2018 at 8:43 AM, F1TZO - Michel <michel@...> wrote:
Hi Chris

Of course I'll share this.
A short version before the Word Mobile Congress un Barcelona, because I run after time ;-)
Do you want config files ?

73'

Michel - F1TZO
Sent from my smartphone
Le 16 févr. 2018, à 01:09, "Chris Andrist, KC7WSU" <chris.andrist@...> a écrit:
Michel,

Can you share what you did with the rest of us?

—
Regards,

Chris Andrist, KC7WSU
DMR-UTAH

On Feb 15, 2018, at 5:02 PM, F1TZO - Michel < michel@...> wrote:

Done !!!

Everything in working !

Thanks Steve for your help and for your work !

I launch in test just a few minutes ago the "French Open Networks" with all gateway : Analog/DMR/C4FM/DStar
It's done because you (Steve), Jonathan (G4KLX), Andy (CA6JAU) and Rudy (PD0ZRY) provide cool software and nice work and help.

Thanks to all of you

Michel - F1TZO



Re: ASL - Analog - HB Bridge help please

Steve N4IRS
 

Do I need to post a set of "working" config files for a BM <---> ASL bridge in the files section.
I THOUGHT the default files work except for login and IDs

Steve

On 2/16/2018 9:45 AM, Eric N0NKI wrote:
Hello Michel,

I like Chris and many others would be interested in configuration files and any other information about your project.

73 - Thank you
  NØNKI - Eric

On Fri, Feb 16, 2018 at 8:43 AM, F1TZO - Michel <michel@...> wrote:
Hi Chris

Of course I'll share this.
A short version before the Word Mobile Congress un Barcelona, because I run after time ;-)
Do you want config files ?

73'

Michel - F1TZO
Sent from my smartphone
Le 16 févr. 2018, à 01:09, "Chris Andrist, KC7WSU" <chris.andrist@...> a écrit:
Michel,

Can you share what you did with the rest of us?

—
Regards,

Chris Andrist, KC7WSU
DMR-UTAH

On Feb 15, 2018, at 5:02 PM, F1TZO - Michel < michel@...> wrote:

Done !!!

Everything in working !

Thanks Steve for your help and for your work !

I launch in test just a few minutes ago the "French Open Networks" with all gateway : Analog/DMR/C4FM/DStar
It's done because you (Steve), Jonathan (G4KLX), Andy (CA6JAU) and Rudy (PD0ZRY) provide cool software and nice work and help.

Thanks to all of you

Michel - F1TZO


Re: ASL - Analog - HB Bridge help please

Eric N0NKI
 

Hello Michel,

I like Chris and many others would be interested in configuration files and any other information about your project.

73 - Thank you
  NØNKI - Eric

On Fri, Feb 16, 2018 at 8:43 AM, F1TZO - Michel <michel@...> wrote:
Hi Chris

Of course I'll share this.
A short version before the Word Mobile Congress un Barcelona, because I run after time ;-)
Do you want config files ?

73'

Michel - F1TZO
Sent from my smartphone
Le 16 févr. 2018, à 01:09, "Chris Andrist, KC7WSU" <chris.andrist@...> a écrit:
Michel,

Can you share what you did with the rest of us?

—
Regards,

Chris Andrist, KC7WSU
DMR-UTAH

On Feb 15, 2018, at 5:02 PM, F1TZO - Michel < michel@...> wrote:

Done !!!

Everything in working !

Thanks Steve for your help and for your work !

I launch in test just a few minutes ago the "French Open Networks" with all gateway : Analog/DMR/C4FM/DStar
It's done because you (Steve), Jonathan (G4KLX), Andy (CA6JAU) and Rudy (PD0ZRY) provide cool software and nice work and help.

Thanks to all of you

Michel - F1TZO


9701 - 9720 of 10557