Date   

Re: Emulator timed out on encode!

Steve N4IRS
 

What hardware and OS version?

On 3/14/21 1:59 PM, G4WXN@... wrote:

I tried
apt reinstall md380-emu as super user
but get :

--------------------------------------------
Reading package lists... Done

Building dependency tree       

Reading state information... Done

Package md380-emu is not available, but is referred to by another package.

This may mean that the package is missing, has been obsoleted, or

is only available from another source

E: Package 'md380-emu' has no installation candidate
------------------------------------------

--
Derek

G4WXN


Re: Emulator timed out on encode!

G4WXN@...
 

I tried
apt reinstall md380-emu as super user
but get :

--------------------------------------------
Reading package lists... Done

Building dependency tree       

Reading state information... Done

Package md380-emu is not available, but is referred to by another package.

This may mean that the package is missing, has been obsoleted, or

is only available from another source

E: Package 'md380-emu' has no installation candidate
------------------------------------------

--
Derek

G4WXN


Re: Emulator timed out on encode!

G4WXN@...
 

Ernie, thanks again.

ran remove and purge seemed to be fine, how do I reinstall md380-emu?

I tried the usual apt-get install be get :

--------------------------------------------
Reading package lists... Done

Building dependency tree       

Reading state information... Done

Package md380-emu is not available, but is referred to by another package.

This may mean that the package is missing, has been obsoleted, or

is only available from another source

E: Package 'md380-emu' has no installation candidate
------------------------------------------

Thanks for your time.

 

--
Derek

G4WXN


Re: Emulator timed out on encode!

Steve N4IRS
 

I would:
systemctl stop md380-emu
rm /lib/systemd/system/md380-emu
rm -rf /opt/md380-emu
apt reinstall md380-emu

This is off the top of my head, so check for typos.


On 3/14/21 11:42 AM, G4WXN@... wrote:
The image is Raspbian a raw install, and then used the brute force script to install DVS.

--
Derek

G4WXN


Re: Emulator timed out on encode!

 

Just md380-emu


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of G4WXN@... <G4WXN@...>
Sent: Sunday, March 14, 2021 3:42:27 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Emulator timed out on encode!
 
The image is Raspbian a raw install, and then used the brute force script to install DVS.

--
Derek

G4WXN


Re: Emulator timed out on encode!

G4WXN@...
 

The image is Raspbian a raw install, and then used the brute force script to install DVS.

--
Derek

G4WXN


Re: Emulator timed out on encode!

G4WXN@...
 
Edited

Ernie, thanks for the reply.

do you simply remove the emulator, or the whole DVS setup?

--
Derek

G4WXN


Re: more: not connecting to BM any more

Steve N4IRS
 

Ken,
You need to check your frequencies again. setting the frequencies to match and duplex = 0 is what you want and will work. Also make sure the callsign matches the DMR ID and the password is correct.

Steve N4IRS

On 3/14/21 11:27 AM, Ken KE2N via groups.io wrote:
On Sat, Mar 13, 2021 at 12:44 PM, Steve N4IRS wrote:
https://dvswitch.groups.io/g/main/message/9018

Yeah I saw that. Setting the two frequencies equal did not help. What finally got the registration working again was setting duplex=1 and leaving the frequencies split. It had been duplex=0 which used to work fine.   I guess duplex=1 means full duplex repeater, which is what I actually have. 

As part of this exercise, I did an update using the DVS menu item.  I am pretty sure I answered no to changes in the ini file, but the update procedure wiped my (MMDVM) password and changed the ports to the default values instead of the ones I had been using in asterisk/usrp.  (It may have changed some other things that did not matter - since I had left them at defaults). 

Its working now - with one anomaly I just noticed.  If the repeaters are idle for some time, I have to key up the analog side first to get the bridge working.  Keying up the DMR side first does not activate the analog side.  The only unusual thing that shows up  in the logs is a timeout in the ircddb log. I don't know if it's related, but this is the message:

 CCS: Connection has failed (poll inactivity) for KE2N   E, reconnecting

That's all

Ken




Re: more: not connecting to BM any more

Ken KE2N
 

On Sat, Mar 13, 2021 at 12:44 PM, Steve N4IRS wrote:
https://dvswitch.groups.io/g/main/message/9018

Yeah I saw that. Setting the two frequencies equal did not help. What finally got the registration working again was setting duplex=1 and leaving the frequencies split. It had been duplex=0 which used to work fine.   I guess duplex=1 means full duplex repeater, which is what I actually have. 

As part of this exercise, I did an update using the DVS menu item.  I am pretty sure I answered no to changes in the ini file, but the update procedure wiped my (MMDVM) password and changed the ports to the default values instead of the ones I had been using in asterisk/usrp.  (It may have changed some other things that did not matter - since I had left them at defaults). 

Its working now - with one anomaly I just noticed.  If the repeaters are idle for some time, I have to key up the analog side first to get the bridge working.  Keying up the DMR side first does not activate the analog side.  The only unusual thing that shows up  in the logs is a timeout in the ircddb log. I don't know if it's related, but this is the message:

 CCS: Connection has failed (poll inactivity) for KE2N   E, reconnecting

That's all

Ken



Re: Emulator timed out on encode!

 

If all settings are correct in Analog_Bridge. And md380-emu is giving errors. I fixed my problems by removing it and then reinstalling. Use remove --purge. Something gets corrupt. 


Re: Bridge

Joshua Johnson - KC5JMJ
 

Changed the port address and the same thing 


Selfcare PW for BM-DMR servers #brandmeister

@AndrewVK2HAC
 

As previously noted, BM-DMR Selfcare password is needed for the BM servers. At the initial login and configuration, this is asked for and works.
I notice for the BM Macro and in DMR the BM TG a standard PW is needed, so I changed this in the in file & the JSON file as appropriate.
May wish to think of how this could be automated.

thankss


Re: more: not connecting to BM any more

Steve N4IRS
 

https://dvswitch.groups.io/g/main/message/9018


Re: more: not connecting to BM any more

Ian Tulley
 

Hi Ken, in your MMDVM_Bridge.ini make sure that your DMR ID matches your callsign and that the TX and RX frequencies are the same.
The latest update on the BM Masters will not allow connection if those are not correct.


Regards
Ian (VK2HK)

Typo's, autocorrect or spelling mistakes courtesy of both myself and my iPhone

On 14 Mar 2021, at 07:21, Ken KE2N via groups.io <ke2n@...> wrote:

A couple nights ago my DVSwitch MMDVM connection to BM failed without warning.   I have been trying various tweaks to the ini file without luck today.
Any more revelations on this topic?

Tnx
Ken

2021-03-13 20:19:00.214 DMR, Login to the master has failed, retrying network ...
M: 2021-03-13 20:19:00.214 DMR, Closing DMR Network
M: 2021-03-13 20:19:00.215 DMR, Opening DMR Network
E: 2021-03-13 20:19:10.299 DMR, Login to the master has failed, retrying network ...
M: 2021-03-13 20:19:10.299 DMR, Closing DMR Network
M: 2021-03-13 20:19:10.303 DMR, Opening DMR Network
 


Re: more: not connecting to BM any more

Peter M0NWI
 

Did you try setting you config file to Simplex, both frequencies to the same number as discussed here over the last couple of days?


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Ken KE2N via groups.io <ke2n@...>
Sent: 13 March 2021 20:20
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: [DVSwitch] more: not connecting to BM any more
 
A couple nights ago my DVSwitch MMDVM connection to BM failed without warning.   I have been trying various tweaks to the ini file without luck today.
Any more revelations on this topic?

Tnx
Ken

2021-03-13 20:19:00.214 DMR, Login to the master has failed, retrying network ...
M: 2021-03-13 20:19:00.214 DMR, Closing DMR Network
M: 2021-03-13 20:19:00.215 DMR, Opening DMR Network
E: 2021-03-13 20:19:10.299 DMR, Login to the master has failed, retrying network ...
M: 2021-03-13 20:19:10.299 DMR, Closing DMR Network
M: 2021-03-13 20:19:10.303 DMR, Opening DMR Network
 


more: not connecting to BM any more

Ken KE2N
 

A couple nights ago my DVSwitch MMDVM connection to BM failed without warning.   I have been trying various tweaks to the ini file without luck today.
Any more revelations on this topic?

Tnx
Ken

2021-03-13 20:19:00.214 DMR, Login to the master has failed, retrying network ...
M: 2021-03-13 20:19:00.214 DMR, Closing DMR Network
M: 2021-03-13 20:19:00.215 DMR, Opening DMR Network
E: 2021-03-13 20:19:10.299 DMR, Login to the master has failed, retrying network ...
M: 2021-03-13 20:19:10.299 DMR, Closing DMR Network
M: 2021-03-13 20:19:10.303 DMR, Opening DMR Network
 


Re: Emulator timed out on encode!

Steve N4IRS
 

You never answered, what is the source image

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of G4WXN@... <G4WXN@...>
Sent: Saturday, March 13, 2021 4:38:46 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Emulator timed out on encode!
 

[Edited Message Follows]

I have 2 Rpi one I use for DStar with a USB dongle and the other on DMR (mostly BM, but other networks too).

I took an image of the "DStar" Rpi SD card, wrote it to a card, and put that on the Rpi I am having problems with, modified the various files so that all the IDs etc were the same as the other Rpi. Amend AB.ini to use the emulator.

Yet I still get the same "Emulator timed out on encode!" error.

Interestingly I found another (unresolved) thread with the same error.


--
Derek

G4WXN


Re: Emulator timed out on encode!

G4WXN@...
 
Edited

I have 2 Rpi one I use for DStar with a USB dongle and the other on DMR (mostly BM, but other networks too).

I took an image of the "DStar" Rpi SD card, wrote it to a card, and put that on the Rpi I am having problems with, modified the various files so that all the IDs etc were the same as the other Rpi. Amend AB.ini to use the emulator.

Yet I still get the same "Emulator timed out on encode!" error.

Interestingly I found another (unresolved) thread with the same error.


--
Derek

G4WXN


Re: hUC

Steve N4IRS
 

No,
hUC is for DVSwirch programs.

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Robert Moldenhauer <vk2dy@...>
Sent: Saturday, March 13, 2021 12:41:04 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: [DVSwitch] hUC
 
Hi guys,

Is hUC a front end for EA5DVK’s DV-Link? I really want to use my iPhone to connect to digital modes.

Robert


hUC

Robert Moldenhauer
 

Hi guys,

Is hUC a front end for EA5DVK’s DV-Link? I really want to use my iPhone to connect to digital modes.

Robert

981 - 1000 of 9795