Date   

Re: Registration of Dv Switch

Steve N4IRS
 

What are you connecting to? AllStar (IAX) or DVSwitch Server (USRP)

Steve N4IRS

On 3/14/21 6:01 PM, g6luu alan wrote:
Hi de G6LUU

Have installed Dv Switch on a second android device 
Which is a T320 nd I have a problem.
It says on Status 'Not registered' . I cannot work out away round this problem , Tried the "Register button with no success
Any help would be appreciated

Regards
alan G6LUU


Registration of Dv Switch

g6luu alan
 

Hi de G6LUU

Have installed Dv Switch on a second android device 
Which is a T320 nd I have a problem.
It says on Status 'Not registered' . I cannot work out away round this problem , Tried the "Register button with no success
Any help would be appreciated

Regards
alan G6LUU


Re: M17 to ASL

Steve KC1AWV
 

Ok, so the only issue I see at this point is with Analog_Bridge. It's not aware of M17 as a digital mode and does not know how to send frames to M17Gateway.

I suppose we'll have to wait until Analog_Bridge supports M17.

Steve KC1AWV


Re: Emulator timed out on encode!

G4WXN@...
 

Terrible audio apparently, so I think a reinstall.
--
Derek

G4WXN


Re: Emulator timed out on encode!

G4WXN@...
 

I've figured it out, I had to add the repository manually.

I think I may have an old version or install, I used the brute force install, it's probably nearly a year old.

Anyway it's working, not sure if it's worth a complete setup from scratch, as I have a lot of work with scripts and macros invested.


--
Derek

G4WXN


Re: Emulator timed out on encode!

Steve N4IRS
 

Show me the output of apt update


On 3/14/21 2:19 PM, G4WXN@... wrote:
Rpi 3 Raspbian buster

--
Derek

G4WXN


Re: Emulator timed out on encode!

G4WXN@...
 

Rpi 3 Raspbian buster

--
Derek

G4WXN


Re: Emulator timed out on encode!

Steve N4IRS
 

What hardware and OS version?

On 3/14/21 1:59 PM, G4WXN@... wrote:

I tried
apt reinstall md380-emu as super user
but get :

--------------------------------------------
Reading package lists... Done

Building dependency tree       

Reading state information... Done

Package md380-emu is not available, but is referred to by another package.

This may mean that the package is missing, has been obsoleted, or

is only available from another source

E: Package 'md380-emu' has no installation candidate
------------------------------------------

--
Derek

G4WXN


Re: Emulator timed out on encode!

G4WXN@...
 

I tried
apt reinstall md380-emu as super user
but get :

--------------------------------------------
Reading package lists... Done

Building dependency tree       

Reading state information... Done

Package md380-emu is not available, but is referred to by another package.

This may mean that the package is missing, has been obsoleted, or

is only available from another source

E: Package 'md380-emu' has no installation candidate
------------------------------------------

--
Derek

G4WXN


Re: Emulator timed out on encode!

G4WXN@...
 

Ernie, thanks again.

ran remove and purge seemed to be fine, how do I reinstall md380-emu?

I tried the usual apt-get install be get :

--------------------------------------------
Reading package lists... Done

Building dependency tree       

Reading state information... Done

Package md380-emu is not available, but is referred to by another package.

This may mean that the package is missing, has been obsoleted, or

is only available from another source

E: Package 'md380-emu' has no installation candidate
------------------------------------------

Thanks for your time.

 

--
Derek

G4WXN


Re: Emulator timed out on encode!

Steve N4IRS
 

I would:
systemctl stop md380-emu
rm /lib/systemd/system/md380-emu
rm -rf /opt/md380-emu
apt reinstall md380-emu

This is off the top of my head, so check for typos.


On 3/14/21 11:42 AM, G4WXN@... wrote:
The image is Raspbian a raw install, and then used the brute force script to install DVS.

--
Derek

G4WXN


Re: Emulator timed out on encode!

 

Just md380-emu


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of G4WXN@... <G4WXN@...>
Sent: Sunday, March 14, 2021 3:42:27 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Emulator timed out on encode!
 
The image is Raspbian a raw install, and then used the brute force script to install DVS.

--
Derek

G4WXN


Re: Emulator timed out on encode!

G4WXN@...
 

The image is Raspbian a raw install, and then used the brute force script to install DVS.

--
Derek

G4WXN


Re: Emulator timed out on encode!

G4WXN@...
 
Edited

Ernie, thanks for the reply.

do you simply remove the emulator, or the whole DVS setup?

--
Derek

G4WXN


Re: more: not connecting to BM any more

Steve N4IRS
 

Ken,
You need to check your frequencies again. setting the frequencies to match and duplex = 0 is what you want and will work. Also make sure the callsign matches the DMR ID and the password is correct.

Steve N4IRS

On 3/14/21 11:27 AM, Ken KE2N via groups.io wrote:
On Sat, Mar 13, 2021 at 12:44 PM, Steve N4IRS wrote:
https://dvswitch.groups.io/g/main/message/9018

Yeah I saw that. Setting the two frequencies equal did not help. What finally got the registration working again was setting duplex=1 and leaving the frequencies split. It had been duplex=0 which used to work fine.   I guess duplex=1 means full duplex repeater, which is what I actually have. 

As part of this exercise, I did an update using the DVS menu item.  I am pretty sure I answered no to changes in the ini file, but the update procedure wiped my (MMDVM) password and changed the ports to the default values instead of the ones I had been using in asterisk/usrp.  (It may have changed some other things that did not matter - since I had left them at defaults). 

Its working now - with one anomaly I just noticed.  If the repeaters are idle for some time, I have to key up the analog side first to get the bridge working.  Keying up the DMR side first does not activate the analog side.  The only unusual thing that shows up  in the logs is a timeout in the ircddb log. I don't know if it's related, but this is the message:

 CCS: Connection has failed (poll inactivity) for KE2N   E, reconnecting

That's all

Ken




Re: more: not connecting to BM any more

Ken KE2N
 

On Sat, Mar 13, 2021 at 12:44 PM, Steve N4IRS wrote:
https://dvswitch.groups.io/g/main/message/9018

Yeah I saw that. Setting the two frequencies equal did not help. What finally got the registration working again was setting duplex=1 and leaving the frequencies split. It had been duplex=0 which used to work fine.   I guess duplex=1 means full duplex repeater, which is what I actually have. 

As part of this exercise, I did an update using the DVS menu item.  I am pretty sure I answered no to changes in the ini file, but the update procedure wiped my (MMDVM) password and changed the ports to the default values instead of the ones I had been using in asterisk/usrp.  (It may have changed some other things that did not matter - since I had left them at defaults). 

Its working now - with one anomaly I just noticed.  If the repeaters are idle for some time, I have to key up the analog side first to get the bridge working.  Keying up the DMR side first does not activate the analog side.  The only unusual thing that shows up  in the logs is a timeout in the ircddb log. I don't know if it's related, but this is the message:

 CCS: Connection has failed (poll inactivity) for KE2N   E, reconnecting

That's all

Ken



Re: Emulator timed out on encode!

 

If all settings are correct in Analog_Bridge. And md380-emu is giving errors. I fixed my problems by removing it and then reinstalling. Use remove --purge. Something gets corrupt. 


Re: Bridge

Joshua Johnson - KC5JMJ
 

Changed the port address and the same thing 


Selfcare PW for BM-DMR servers #brandmeister

@AndrewVK2HAC
 

As previously noted, BM-DMR Selfcare password is needed for the BM servers. At the initial login and configuration, this is asked for and works.
I notice for the BM Macro and in DMR the BM TG a standard PW is needed, so I changed this in the in file & the JSON file as appropriate.
May wish to think of how this could be automated.

thankss


Re: more: not connecting to BM any more

Steve N4IRS
 

https://dvswitch.groups.io/g/main/message/9018

1061 - 1080 of 9882