Date   

Re: Cloud based Dstar Ambe Server Audio Quality

Tom Corcoran
 

Hello Ken,

for my benefit ...

DVS running on cloud server
Client (DVSM/PyUC/hUC) running remote (in your vehicle
AMBEserver running on RPi at your home
DV3000 stanza in AB.ini address = 192.168.x.xxx (IP of AMBEserver on your home Network)

correct?

Tnx .... Tom VE3NY 

--
Tom VE3NY


Re: #mmdvm_bridge Segmentation Fault on Debian 10 amd64 #mmdvm_bridge

Steve N4IRS
 

Please show me the output of /opt/MMDVM_Bridge/MMDVM_Bridge -v

On 3/22/21 4:00 AM, Kimberly wrote:
On Sun, Mar 21, 2021 at 03:26 AM, Steve N4IRS wrote:
Kimberly,
I'll need to see a few things to help determine the cause of the issue.
As root, please post the result of the following:
uname -a
file /opt/MMDVM_Bridge/MMDVM_Bridge

Steve N4IRS

Ok, I ran the commands you suggested, here is the output:

root@localhost:/opt/MMDVM_Bridge# uname -a
Linux localhost 4.19.0-14-amd64 #1 SMP Debian 4.19.171-2 (2021-01-30) x86_64 GNU/Linux

root@localhost:/opt/MMDVM_Bridge# file /opt/MMDVM_Bridge/MMDVM_Bridge
/opt/MMDVM_Bridge/MMDVM_Bridge: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=a0d5832b67656402132de72bf9ecce57320e73e9, with debug_info, not stripped
 


Re: Bridge

Steve N4IRS
 

As I said, I'm not going to dig through over 100 messages.
1: What are you trying to bridge?
2:  What hardware / OS are you running on?

Start there. 

On 3/22/21 12:26 AM, ibjosh1985@... wrote:
not looking for some one to do it for me just answer questions i have sent my files , logs and copy and past so the audio bridge file for dmr once launched it says it cannot bind a port but when changing ports it still say's the samething and then i'm getting this Your gatewayDmrId 3174494 is NOT  in the subscriber file.


Re: #mmdvm_bridge Segmentation Fault on Debian 10 amd64 #mmdvm_bridge

Kimberly (KJ7OMO)
 

On Sun, Mar 21, 2021 at 03:26 AM, Steve N4IRS wrote:
Kimberly,
I'll need to see a few things to help determine the cause of the issue.
As root, please post the result of the following:
uname -a
file /opt/MMDVM_Bridge/MMDVM_Bridge

Steve N4IRS

Ok, I ran the commands you suggested, here is the output:

root@localhost:/opt/MMDVM_Bridge# uname -a
Linux localhost 4.19.0-14-amd64 #1 SMP Debian 4.19.171-2 (2021-01-30) x86_64 GNU/Linux

root@localhost:/opt/MMDVM_Bridge# file /opt/MMDVM_Bridge/MMDVM_Bridge
/opt/MMDVM_Bridge/MMDVM_Bridge: ELF 64-bit LSB pie executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=a0d5832b67656402132de72bf9ecce57320e73e9, with debug_info, not stripped
 


Re: Bridge

Joshua Johnson - KC5JMJ
 

not looking for some one to do it for me just answer questions i have sent my files , logs and copy and past so the audio bridge file for dmr once launched it says it cannot bind a port but when changing ports it still say's the samething and then i'm getting this Your gatewayDmrId 3174494 is NOT  in the subscriber file.


Re: Cloud based Dstar Ambe Server Audio Quality

Ken, K6EFJ
 

Would anyone in the group with a VPS Cloud installation of Debian 10 Buster running a current DvSwitch install be able to point their VPS  Cloud Server to the domain name, and port # of my Zum Ambe Server and let me know how the audio sounds on Dstar and Dmr?
Thanks, Ken


Re: Cloud based Dstar Ambe Server Audio Quality

Ken, K6EFJ
 

Tom, 
Using DVSM on T mobile thru cell towers.


Re: Bridge

Randy AA6RH
 

On Sat, Mar 20, 2021 at 01:42 PM, Steve N4IRS wrote:
So that I don't have to go through 142 messages, what are you trying to do and what is your problem?

Steve N4IRS

On 3/20/21 4:40 PM, ibjosh1985@... wrote:
can i get any assistance please
As far as I can tell, this is an individual who is in over their head with the network port arrangements. Something isn't plumbed together correctly and it's not working.

I would insist that we get a diagram from them describing what they think is being configured. If all they provide is log files, that might not be enough to understand/comprehend the data flows properly.

My two cents, anyway.

--R
--
Randy Hall AA6RH (not K7AGE, quit asking) 😁


Re: Bridge

Randy AA6RH
 

On Sat, Mar 20, 2021 at 01:40 PM, <ibjosh1985@...> wrote:
can i get any assistance please
I strongly suggest that you spend a bit of time diagramming this in order to make sense of the interconnection between services. I scanned the thread and haven't seen you provide this, and looking at screenshots and copy-pasted logs is not helping right now (i.e. very, VERY hard to read and follow).

DV Switch is not an off-the-shelf product that you can just plug in and expect it to work flawlessly. You as an individual user also need to step up and make it a priority to learn how UDP networking functions in the real world. Your questions and responses have shown that you're not quite there (though I'm open to the possibility that you're actually very experienced with UDP and just want someone to do the work for you). UDP sockets can be confusing; go slow and take your time.

This is not to be mean-spirited, but you can't reasonably expect someone else to configure your software for you. All we can do is offer suggestions.

--R
 
--
Randy Hall AA6RH (not K7AGE, quit asking) 😁


Re: #mmdvm_bridge Segmentation Fault on Debian 10 amd64 #mmdvm_bridge

Steve N4IRS
 

The only reason to do this is if you are running MMDVM_Bridge in daemon mode. We use systemd so this is not needed.

Steve N4IRS

On 3/21/21 1:03 AM, Lily W. wrote:

Create a user named “mmdvm”, password mmdvm, and give it write access to /var/log/mmdvm (MMDVM_Bridge needs this to write log files.) I’ve had to manually do that to all of my Quantar_Bridge installs.

 

From: main@DVSwitch.groups.io [mailto:main@DVSwitch.groups.io] On Behalf Of Kimberly
Sent: Saturday, 20 March, 2021 22:51
To: main@DVSwitch.groups.io
Subject: [DVSwitch] #mmdvm_bridge Segmentation Fault on Debian 10 amd64

 

Hello, everyone. I'm having trouble getting MMDVM_Bridge to run on a Debian 10 VPS running the AllstarLink 2.0 Beta 5 image, which is based off Debian 10. Each time I try to run it, it gives me a "Segmentation Fault" error with no other clues to help me determine what went wrong. I tried some solutions out there, but none of them worked for me. Any ideas?



Re: #mmdvm_bridge Segmentation Fault on Debian 10 amd64 #mmdvm_bridge

Steve N4IRS
 

Kimberly,
I'll need to see a few things to help determine the cause of the issue.
As root, please post the result of the following:
uname -a
file /opt/MMDVM_Bridge/MMDVM_Bridge

Steve N4IRS

On 3/20/21 11:50 PM, Kimberly wrote:
Hello, everyone. I'm having trouble getting MMDVM_Bridge to run on a Debian 10 VPS running the AllstarLink 2.0 Beta 5 image, which is based off Debian 10. Each time I try to run it, it gives me a "Segmentation Fault" error with no other clues to help me determine what went wrong. I tried some solutions out there, but none of them worked for me. Any ideas?


Re: #mmdvm_bridge Segmentation Fault on Debian 10 amd64 #mmdvm_bridge

Lillian W.
 

Create a user named “mmdvm”, password mmdvm, and give it write access to /var/log/mmdvm (MMDVM_Bridge needs this to write log files.) I’ve had to manually do that to all of my Quantar_Bridge installs.

 

From: main@DVSwitch.groups.io [mailto:main@DVSwitch.groups.io] On Behalf Of Kimberly
Sent: Saturday, 20 March, 2021 22:51
To: main@DVSwitch.groups.io
Subject: [DVSwitch] #mmdvm_bridge Segmentation Fault on Debian 10 amd64

 

Hello, everyone. I'm having trouble getting MMDVM_Bridge to run on a Debian 10 VPS running the AllstarLink 2.0 Beta 5 image, which is based off Debian 10. Each time I try to run it, it gives me a "Segmentation Fault" error with no other clues to help me determine what went wrong. I tried some solutions out there, but none of them worked for me. Any ideas?


#mmdvm_bridge Segmentation Fault on Debian 10 amd64 #mmdvm_bridge

Kimberly (KJ7OMO)
 

Hello, everyone. I'm having trouble getting MMDVM_Bridge to run on a Debian 10 VPS running the AllstarLink 2.0 Beta 5 image, which is based off Debian 10. Each time I try to run it, it gives me a "Segmentation Fault" error with no other clues to help me determine what went wrong. I tried some solutions out there, but none of them worked for me. Any ideas?


Re: Bridge

Steve N4IRS
 

So that I don't have to go through 142 messages, what are you trying to do and what is your problem?

Steve N4IRS

On 3/20/21 4:40 PM, ibjosh1985@... wrote:
can i get any assistance please


Re: Bridge

Joshua Johnson - KC5JMJ
 

can i get any assistance please


Re: Cannot connect to DVswitch - Android 11 - cannot see back chevron from Accounts

David J Taylor
 

On 20/03/2021 10:38, Steve N4IRS wrote:
Davis,
Sorry I was looking at the actual menu, not the rest of the Android screen.
swipe right below the choices to return to the dialer screen.
Steve
Thanks, Steve. I had discovered the swipe right (having tried much swiping!) but the DMR broken connection (the delta-F error) had prevented the usual connect from appearing.

Good learning, though!

73,
David GM8ARV
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@blueyonder.co.uk
Twitter: @gm8arv


Re: Cannot connect to DVswitch - Android 11 - cannot see back chevron from Accounts

Steve N4IRS
 

Davis,
Sorry I was looking at the actual menu, not the rest of the Android screen.
swipe right below the choices to return to the dialer screen.

Steve

On 3/20/21 6:33 AM, David J Taylor via groups.io wrote:
On 20/03/2021 10:09, Steve N4IRS wrote:
David,
I see no difference between your Accounts tab and mine. What am I not
seeing?

Steve N4IRS
Steve,

I'm missing the three icons at the bottom of the screen (from the User Guide), the three vertical lines, the rounded rectangle, and the left-facing chevron.  These look like an earlier version of Android.

I'm just trying to follow the instructions which state:

  "Save and return to the Dialer screen by pressing the back arrow (<) button." -

73,
David GM8ARV


Re: Cannot connect to DVswitch - Android 11 - cannot see back chevron from Accounts

David J Taylor
 

On 20/03/2021 10:09, Steve N4IRS wrote:
David,
I see no difference between your Accounts tab and mine. What am I not
seeing?
Steve N4IRS
Steve,

I'm missing the three icons at the bottom of the screen (from the User Guide), the three vertical lines, the rounded rectangle, and the left-facing chevron. These look like an earlier version of Android.

I'm just trying to follow the instructions which state:

"Save and return to the Dialer screen by pressing the back arrow (<) button." -

73,
David GM8ARV
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@blueyonder.co.uk
Twitter: @gm8arv


Re: Cannot connect to DVswitch - Android 11 - cannot see back chevron from Accounts

Steve N4IRS
 

David,
I see no difference between your Accounts tab and mine. What am I not seeing?

Steve N4IRS

On 3/20/21 6:04 AM, David J Taylor via groups.io wrote:
On 20/03/2021 08:24, Ernie Gm7kbk wrote:
Very bottom right of your android phone. The symbol looks like <
Thanks, Ernie.  I know what the symbol looks like, and there is a screen-shot in the User Guide showing its location, but it is not present on my phone as you can see from my screen-shot.

Google Pixel 5, OS: Android 11, update 05-Mar-2021.

Cheers,
David


Re: Cannot connect to DVswitch - Android 11 - cannot see back chevron from Accounts

David J Taylor
 

On 20/03/2021 08:24, Ernie Gm7kbk wrote:
Very bottom right of your android phone. The symbol looks like <
Thanks, Ernie. I know what the symbol looks like, and there is a screen-shot in the User Guide showing its location, but it is not present on my phone as you can see from my screen-shot.

Google Pixel 5, OS: Android 11, update 05-Mar-2021.

Cheers,
David
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@blueyonder.co.uk
Twitter: @gm8arv

1021 - 1040 of 9931