Date   

DV switch to ASL 2.0 beta 6

Pete Fierro <overthetop52@...>
 

Hello

    Trying to upgrade to the new software here.Im running ASL to DMR bridge via DV Switch. 

   Question....Trying to upload Dv switch to the new software...DV Switch to ASL 2.0 Beta 6...See pic

    "Unable to locate package dvswitch "

What's up with this?

Pete
KD2ARB 





Re: Support for 5 digit capacity + ID's

Alec-N1AJW
 

Last check with BM admins it was no.  


Alec


Re: hytera USB packet structure

Heiko DL1BZ
 

Hi Kev,

there's a simple answer. The Hytera-IPSC is proprietary. Unlike the "over the air" interface, which follows a clear specification (ETSI), the network side is not subject to such a specification. In hamradio digital voice we mostly use the homebrew protocol, also called MMDVM. Hytera, whose devices are intended for commercial purposes, use their own protocols. Developers usually only get access to this information mostly after they sign an NDA. Which also means that you cannot and may not publish this information that easily. That's why I have to tell you, your search is unlikely to be successful. You will probably not find what you are specifically looking for.
Hytera-IPSC and MMDVM are similar, but also differ in many places. There are already protocol converters Hytera IPSC <> MMDVM, but only for the Hytera repeaters. However, these were previously closed source. But there is an interesting project: https://github.com/OK-DMR/Hytera_Homebrew_Bridge

73 Heiko, DL1BZ


Support for 5 digit capacity + ID's

KYLE - WX9KVH
 

Just wondering if there will ever be support for Cap + ID's that were issued by DMR MARC back in the day? I know my audio passes through BM without issue, but does not come across the DVSM service at all. 

 

Just curious. Thanks in advance!

73 de WX9KVH


Re: Analog Reflector (hUC) installation problem turned out to be a Firefox problem

 

Mike, FYI, I'm having no issues using Firefox with the latest hUC.  I'm running the latest Firefox on Windows 10.

On 24/3/21 11:44 pm, Mike Zingman - N4IRR wrote:
So I can reproduce you issue, please tell me the OS version by running
uname -a
and reporting the results.  All tests I have done with FF have worked, so I want to see if I broke something recently.


-- 
73 de Tony VK3JED/VK3IRL
http://vkradio.com


Re: Analog Reflector (hUC) installation problem turned out to be a Firefox problem

JerryL
 

Hi Mike,
In addition to t my last reply with the screen shot 'uname -a',  attached is what I look at when using Firefox.


Re: Analog Reflector (hUC) installation problem turned out to be a Firefox problem

JerryL
 

Hi Mike,
MX Linux (#1 Distrowatch) see the attached.  I've never attached a file that way, I hope it worked.  If it didn't I'll plug in all the details.  ~Jerry, KB3OIL


Re: Analog Reflector (hUC) installation problem turned out to be a Firefox problem

Mike Zingman - N4IRR
 

So I can reproduce you issue, please tell me the OS version by running
uname -a
and reporting the results.  All tests I have done with FF have worked, so I want to see if I broke something recently.


Analog Reflector (hUC) installation problem turned out to be a Firefox problem

JerryL
 

I tried to get the Analog Reflector (hUC) going for a couple of weeks without any luck.  I could get it onto the web page just fine with Firefox.  It let me have audio in, but no transmit out because Firefox did not even give me the 'Transmit' button (how the heck did Firefox do that ????)  I finally had a friend watch me remotely reinstall the AR (uHC) with 'AnyDesk'.  Neither of us could see a problem or see any error codes.  Finally I tried to fire up the hUC web site with Chrome instead of Firefox.  This was after Chrome asked if I was sure I wanted to install an unsecured web site.  And asked again if was I really sure, and really really sure or whatever they were asking, I agreed to all.  Firefox and other browsers asked the same questions.  Anyway it now works perfectly on two Linux computers with Chrome and nothing else that I've tried.  I want to see how it works on a friends computer.  Now it's up and onward to getting Allstar installed.  Thank you Steve, Mike and your team for putting all this together. 


Re: #brandmeister #brandmeister

Bill Kittilson <bill.kittilson@...>
 

Ok Thanks again for your help.

73 Bill N3JHS


Re: #brandmeister #brandmeister

Steve N4IRS
 

Bill,
You don't need a repeater ID for a bridge. Using your DMR ID for a TG number is just fine. Look in Analog_Bridge.ini for this:

[AMBE_AUDIO]
minTxTimeMS = 2500                      ; Analog -> Digital Minimum time in MS for hang delay (0-10000)


Increase the value to 3000 and restart Analog_brige. That should help.

Steve N4IRS

On 3/23/2021 1:25 PM, Bill Kittilson wrote:
Thanks! That fixed the issue.  Not sure how that got deleted.  
I'm using my DMR ID as the talk group.   This seams to work until someone on my allstar or DMR has a bad connection and drop the connection too many times Then I get "user blocked" from Brandmister.  

Someone said get a repeater ID, I have one but no idea how to use it for the bridge.  Have you use a repeater id for bridging?


Thanks
Bill


Re: #brandmeister #brandmeister

Bill Kittilson <bill.kittilson@...>
 

Thanks! That fixed the issue.  Not sure how that got deleted.  
I'm using my DMR ID as the talk group.   This seams to work until someone on my allstar or DMR has a bad connection and drop the connection too many times Then I get "user blocked" from Brandmister.  

Someone said get a repeater ID, I have one but no idea how to use it for the bridge.  Have you use a repeater id for bridging?


Thanks
Bill


Re: #brandmeister #brandmeister

Steve N4IRS
 

Your network should look like this:

[DMR Network]
Port=62031
Local=62032

Plus all your other settings.


On 3/23/2021 1:04 PM, Bill Kittilson wrote:
Changed the port


 
I: 2021-03-23 17:03:32.441 General Parameters
I: 2021-03-23 17:03:32.441     Callsign: N3JHS
I: 2021-03-23 17:03:32.441     Id: 314210310
I: 2021-03-23 17:03:32.441     Duplex: no
I: 2021-03-23 17:03:32.441     Timeout: 180s
I: 2021-03-23 17:03:32.441     D-Star: disabled
I: 2021-03-23 17:03:32.441     DMR: enabled
I: 2021-03-23 17:03:32.441     YSF: enabled
I: 2021-03-23 17:03:32.441     P25: disabled
I: 2021-03-23 17:03:32.441     NXDN: disabled
I: 2021-03-23 17:03:32.442 Modem Parameters
I: 2021-03-23 17:03:32.442     Port: /dev/null
I: 2021-03-23 17:03:32.442     RX Invert: no
I: 2021-03-23 17:03:32.442     TX Invert: no
I: 2021-03-23 17:03:32.442     PTT Invert: no
I: 2021-03-23 17:03:32.442     TX Delay: 100ms
I: 2021-03-23 17:03:32.442     RX Offset: 0Hz
I: 2021-03-23 17:03:32.442     TX Offset: 0Hz
I: 2021-03-23 17:03:32.442     RX DC Offset: 0
I: 2021-03-23 17:03:32.442     TX DC Offset: 0
I: 2021-03-23 17:03:32.442     RF Level: 100.0%
I: 2021-03-23 17:03:32.442     DMR Delay: 0 (0.0ms)
I: 2021-03-23 17:03:32.442     RX Level: 50.0%
I: 2021-03-23 17:03:32.442     CW Id TX Level: 50.0%
I: 2021-03-23 17:03:32.442     D-Star TX Level: 50.0%
I: 2021-03-23 17:03:32.442     DMR TX Level: 50.0%
I: 2021-03-23 17:03:32.442     YSF TX Level: 50.0%
I: 2021-03-23 17:03:32.442     P25 TX Level: 50.0%
I: 2021-03-23 17:03:32.443     NXDN TX Level: 50.0%
I: 2021-03-23 17:03:32.443     RX Frequency: 446100000Hz (446100000Hz)
I: 2021-03-23 17:03:32.443     TX Frequency: 446100000Hz (446100000Hz)
M: 2021-03-23 17:03:32.443 Opening the MMDVM
I: 2021-03-23 17:03:32.443 Display Parameters
I: 2021-03-23 17:03:32.443     Type:
I: 2021-03-23 17:03:32.443 DMR Network Parameters
I: 2021-03-23 17:03:32.443     Address: 3103.repeater.net
I: 2021-03-23 17:03:32.443     Port: 0
I: 2021-03-23 17:03:32.443     Local: 62032
I: 2021-03-23 17:03:32.443     Jitter: 360ms
I: 2021-03-23 17:03:32.443     Slot 1: disabled
I: 2021-03-23 17:03:32.443     Slot 2: enabled
I: 2021-03-23 17:03:32.443     Mode Hang: 3s
MMDVM_Bridge: DMRNetwork.cpp:74: CDMRNetwork::CDMRNetwork(const string&, unsigned int, unsigned int, unsigned int, const string&, bool, const char*, bool, bool, bool, HW_TYPE): Assertion `port > 0U' failed.
Aborted
 


Re: #brandmeister #brandmeister

Bill Kittilson <bill.kittilson@...>
 

Changed the port


 
I: 2021-03-23 17:03:32.441 General Parameters
I: 2021-03-23 17:03:32.441     Callsign: N3JHS
I: 2021-03-23 17:03:32.441     Id: 314210310
I: 2021-03-23 17:03:32.441     Duplex: no
I: 2021-03-23 17:03:32.441     Timeout: 180s
I: 2021-03-23 17:03:32.441     D-Star: disabled
I: 2021-03-23 17:03:32.441     DMR: enabled
I: 2021-03-23 17:03:32.441     YSF: enabled
I: 2021-03-23 17:03:32.441     P25: disabled
I: 2021-03-23 17:03:32.441     NXDN: disabled
I: 2021-03-23 17:03:32.442 Modem Parameters
I: 2021-03-23 17:03:32.442     Port: /dev/null
I: 2021-03-23 17:03:32.442     RX Invert: no
I: 2021-03-23 17:03:32.442     TX Invert: no
I: 2021-03-23 17:03:32.442     PTT Invert: no
I: 2021-03-23 17:03:32.442     TX Delay: 100ms
I: 2021-03-23 17:03:32.442     RX Offset: 0Hz
I: 2021-03-23 17:03:32.442     TX Offset: 0Hz
I: 2021-03-23 17:03:32.442     RX DC Offset: 0
I: 2021-03-23 17:03:32.442     TX DC Offset: 0
I: 2021-03-23 17:03:32.442     RF Level: 100.0%
I: 2021-03-23 17:03:32.442     DMR Delay: 0 (0.0ms)
I: 2021-03-23 17:03:32.442     RX Level: 50.0%
I: 2021-03-23 17:03:32.442     CW Id TX Level: 50.0%
I: 2021-03-23 17:03:32.442     D-Star TX Level: 50.0%
I: 2021-03-23 17:03:32.442     DMR TX Level: 50.0%
I: 2021-03-23 17:03:32.442     YSF TX Level: 50.0%
I: 2021-03-23 17:03:32.442     P25 TX Level: 50.0%
I: 2021-03-23 17:03:32.443     NXDN TX Level: 50.0%
I: 2021-03-23 17:03:32.443     RX Frequency: 446100000Hz (446100000Hz)
I: 2021-03-23 17:03:32.443     TX Frequency: 446100000Hz (446100000Hz)
M: 2021-03-23 17:03:32.443 Opening the MMDVM
I: 2021-03-23 17:03:32.443 Display Parameters
I: 2021-03-23 17:03:32.443     Type:
I: 2021-03-23 17:03:32.443 DMR Network Parameters
I: 2021-03-23 17:03:32.443     Address: 3103.repeater.net
I: 2021-03-23 17:03:32.443     Port: 0
I: 2021-03-23 17:03:32.443     Local: 62032
I: 2021-03-23 17:03:32.443     Jitter: 360ms
I: 2021-03-23 17:03:32.443     Slot 1: disabled
I: 2021-03-23 17:03:32.443     Slot 2: enabled
I: 2021-03-23 17:03:32.443     Mode Hang: 3s
MMDVM_Bridge: DMRNetwork.cpp:74: CDMRNetwork::CDMRNetwork(const string&, unsigned int, unsigned int, unsigned int, const string&, bool, const char*, bool, bool, bool, HW_TYPE): Assertion `port > 0U' failed.
Aborted
 


Re: #brandmeister #brandmeister

Steve N4IRS
 

See my message about the port and local port.


On 3/23/2021 12:55 PM, Bill Kittilson wrote:
M: 2021-03-23 16:52:25.359 MMDVM_Bridge-20200309_V1.5.1 is starting
M: 2021-03-23 16:52:25.359 Built 19:52:05 May 16 2020 (GitID #fcd30b9)
I: 2021-03-23 16:52:25.359 General Parameters
I: 2021-03-23 16:52:25.359     Callsign: N3JHS
I: 2021-03-23 16:52:25.359     Id: 314210311
I: 2021-03-23 16:52:25.359     Duplex: no
I: 2021-03-23 16:52:25.359     Timeout: 180s
I: 2021-03-23 16:52:25.359     D-Star: disabled
I: 2021-03-23 16:52:25.359     DMR: enabled
I: 2021-03-23 16:52:25.359     YSF: enabled
I: 2021-03-23 16:52:25.359     P25: disabled
I: 2021-03-23 16:52:25.359     NXDN: disabled
I: 2021-03-23 16:52:25.359 Modem Parameters
I: 2021-03-23 16:52:25.359     Port: /dev/null
I: 2021-03-23 16:52:25.360     RX Invert: no
I: 2021-03-23 16:52:25.360     TX Invert: no
I: 2021-03-23 16:52:25.360     PTT Invert: no
I: 2021-03-23 16:52:25.360     TX Delay: 100ms
I: 2021-03-23 16:52:25.360     RX Offset: 0Hz
I: 2021-03-23 16:52:25.360     TX Offset: 0Hz
I: 2021-03-23 16:52:25.360     RX DC Offset: 0
I: 2021-03-23 16:52:25.360     TX DC Offset: 0
I: 2021-03-23 16:52:25.360     RF Level: 100.0%
I: 2021-03-23 16:52:25.360     DMR Delay: 0 (0.0ms)
I: 2021-03-23 16:52:25.360     RX Level: 50.0%
I: 2021-03-23 16:52:25.360     CW Id TX Level: 50.0%
I: 2021-03-23 16:52:25.360     D-Star TX Level: 50.0%
I: 2021-03-23 16:52:25.360     DMR TX Level: 50.0%
I: 2021-03-23 16:52:25.360     YSF TX Level: 50.0%
I: 2021-03-23 16:52:25.360     P25 TX Level: 50.0%
I: 2021-03-23 16:52:25.360     NXDN TX Level: 50.0%
I: 2021-03-23 16:52:25.360     RX Frequency: 446100000Hz (446100000Hz)
I: 2021-03-23 16:52:25.361     TX Frequency: 446100000Hz (446100000Hz)
M: 2021-03-23 16:52:25.361 Opening the MMDVM
I: 2021-03-23 16:52:25.361 Display Parameters
I: 2021-03-23 16:52:25.361     Type:
I: 2021-03-23 16:52:25.361 DMR Network Parameters
I: 2021-03-23 16:52:25.361     Address: 3103.repeater.net
I: 2021-03-23 16:52:25.361     Port: 0
I: 2021-03-23 16:52:25.361     Local: 62031
I: 2021-03-23 16:52:25.361     Jitter: 360ms
I: 2021-03-23 16:52:25.362     Slot 1: disabled
I: 2021-03-23 16:52:25.362     Slot 2: enabled
I: 2021-03-23 16:52:25.362     Mode Hang: 3s
MMDVM_Bridge: DMRNetwork.cpp:74: CDMRNetwork::CDMRNetwork(const string&, unsigne                                d int, unsigned int, unsigned int, const string&, bool, const char*, bool, bool,                                 bool, HW_TYPE): Assertion `port > 0U' failed.
Aborted
root@raspberrypi:/opt/MMDVM_Bridge#
 


Re: #brandmeister #brandmeister

Bill Kittilson <bill.kittilson@...>
 

M: 2021-03-23 16:52:25.359 MMDVM_Bridge-20200309_V1.5.1 is starting
M: 2021-03-23 16:52:25.359 Built 19:52:05 May 16 2020 (GitID #fcd30b9)
I: 2021-03-23 16:52:25.359 General Parameters
I: 2021-03-23 16:52:25.359     Callsign: N3JHS
I: 2021-03-23 16:52:25.359     Id: 314210311
I: 2021-03-23 16:52:25.359     Duplex: no
I: 2021-03-23 16:52:25.359     Timeout: 180s
I: 2021-03-23 16:52:25.359     D-Star: disabled
I: 2021-03-23 16:52:25.359     DMR: enabled
I: 2021-03-23 16:52:25.359     YSF: enabled
I: 2021-03-23 16:52:25.359     P25: disabled
I: 2021-03-23 16:52:25.359     NXDN: disabled
I: 2021-03-23 16:52:25.359 Modem Parameters
I: 2021-03-23 16:52:25.359     Port: /dev/null
I: 2021-03-23 16:52:25.360     RX Invert: no
I: 2021-03-23 16:52:25.360     TX Invert: no
I: 2021-03-23 16:52:25.360     PTT Invert: no
I: 2021-03-23 16:52:25.360     TX Delay: 100ms
I: 2021-03-23 16:52:25.360     RX Offset: 0Hz
I: 2021-03-23 16:52:25.360     TX Offset: 0Hz
I: 2021-03-23 16:52:25.360     RX DC Offset: 0
I: 2021-03-23 16:52:25.360     TX DC Offset: 0
I: 2021-03-23 16:52:25.360     RF Level: 100.0%
I: 2021-03-23 16:52:25.360     DMR Delay: 0 (0.0ms)
I: 2021-03-23 16:52:25.360     RX Level: 50.0%
I: 2021-03-23 16:52:25.360     CW Id TX Level: 50.0%
I: 2021-03-23 16:52:25.360     D-Star TX Level: 50.0%
I: 2021-03-23 16:52:25.360     DMR TX Level: 50.0%
I: 2021-03-23 16:52:25.360     YSF TX Level: 50.0%
I: 2021-03-23 16:52:25.360     P25 TX Level: 50.0%
I: 2021-03-23 16:52:25.360     NXDN TX Level: 50.0%
I: 2021-03-23 16:52:25.360     RX Frequency: 446100000Hz (446100000Hz)
I: 2021-03-23 16:52:25.361     TX Frequency: 446100000Hz (446100000Hz)
M: 2021-03-23 16:52:25.361 Opening the MMDVM
I: 2021-03-23 16:52:25.361 Display Parameters
I: 2021-03-23 16:52:25.361     Type:
I: 2021-03-23 16:52:25.361 DMR Network Parameters
I: 2021-03-23 16:52:25.361     Address: 3103.repeater.net
I: 2021-03-23 16:52:25.361     Port: 0
I: 2021-03-23 16:52:25.361     Local: 62031
I: 2021-03-23 16:52:25.361     Jitter: 360ms
I: 2021-03-23 16:52:25.362     Slot 1: disabled
I: 2021-03-23 16:52:25.362     Slot 2: enabled
I: 2021-03-23 16:52:25.362     Mode Hang: 3s
MMDVM_Bridge: DMRNetwork.cpp:74: CDMRNetwork::CDMRNetwork(const string&, unsigne                                d int, unsigned int, unsigned int, const string&, bool, const char*, bool, bool,                                 bool, HW_TYPE): Assertion `port > 0U' failed.
Aborted
root@raspberrypi:/opt/MMDVM_Bridge#
 


Re: #brandmeister #brandmeister

Steve N4IRS
 

Well,
The log file says it's running. Did you change anything with the program?

On 3/23/2021 12:49 PM, Bill Kittilson wrote:
On Tue, Mar 23, 2021 at 09:38 AM, Steve N4IRS wrote:
./MMDVM_Bridge MMDVM_Bridge.ini
 
-bash: ./MMDVM_Bridge: cannot execute binary file: Exec format error

Im on Pi if that makes any differance.




Re: #brandmeister #brandmeister

Bill Kittilson <bill.kittilson@...>
 

On Tue, Mar 23, 2021 at 09:38 AM, Steve N4IRS wrote:
./MMDVM_Bridge MMDVM_Bridge.ini
 
-bash: ./MMDVM_Bridge: cannot execute binary file: Exec format error

Im on Pi if that makes any differance.



Re: #brandmeister #brandmeister

Steve N4IRS
 

Bill,
You sent this for your config:

[DMR Network]

Enable=1

Address=3103.repeater.net

Jitter=360

Local=62031 <--------------------------- Should be 62032

Password=mypassword

# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md

# for XLX the syntax is: Options=XLX:4009

# Options=

Slot1=0

Slot2=1

Debug=1


And this is in your log:

I: 2021-03-23 15:56:02.905 DMR Network Parameters
I: 2021-03-23 15:56:02.905     Address: 3103.repeater.net
I: 2021-03-23 15:56:02.905     Port: 0 <----------------------------------- Should be 62031
I: 2021-03-23 15:56:02.905     Local: 62031 <--------------------------- Should be 62032
I: 2021-03-23 15:56:02.905     Jitter: 360ms
I: 2021-03-23 15:56:02.905     Slot 1: disabled
I: 2021-03-23 15:56:02.905     Slot 2: enabled
I: 2021-03-23 15:56:02.905     Mode Hang: 3s


Port seems to be missing from the [DMR Network] section and local port is wrong.


Steve N4IRS


On 3/23/2021 12:34 PM, Bill Kittilson wrote:
On Tue, Mar 23, 2021 at 09:29 AM, Steve N4IRS wrote:
I would like to see the log where MB is trying to connect to BM.


Re: #brandmeister #brandmeister

Steve N4IRS
 

Based on the log, I think MB has a problem with the config. Not sure what. I would:
systemctl stop mmdvm_bridge
cd /opt/MMDVM_Bridge
./MMDVM_Bridge MMDVM_Bridge.ini
show the result, to the end.

Steve

On 3/23/2021 12:34 PM, Bill Kittilson wrote:
On Tue, Mar 23, 2021 at 09:29 AM, Steve N4IRS wrote:
I would like to see the log where MB is trying to connect to BM.

861 - 880 of 9820