Date   

P25 Integration via AllStar Link

William Freeman
 

Good morning, everyone!

I was pointed over here from the AllStar Link mailing list. I own and operate several mixed-mode P25/FM ham machines (100w Quantars) in Las Vegas. Currently, the FM machine is connected to the AllStar Link system while the P25 is standalone. I would like to ultimately run P25 exclusively but still have it connected to the local AllStar network here in Vegas that has FM-only machines. Has anyone accomplished this? Does anyone have the procedures for doing this? I am not interested in connecting the P25nx system, but rather the overall AllStar Link system.

Bill N4NJJ

--
William Freeman


Re: ASL>DStar noise problem

G7RPG - Peter Kendall
 

Thanks Steve K4SQ,

That fixed it, changed to 1.5 and DStar audio levels now much closer to others on Allstar.

73
Peter
G7RPG


On 19/03/18 16:37, Steven Blackford wrote:

Peter/Steve,

    I ran into this problem a while back.  Peter, you have to modify the DummyRepeaterThread.cpp file.  The division by 3 drops the audio level pretty low.  So, I modified it to multiple by 1.5 instead.  If increase it to 2.0 or higher, you’ll start getting bad clipping, so I just left it @ 1.5.  It was late in the middle of the night when I looked @ this & it’s probably not the right way to correct the problem, but it has been working here. 😉 Here’s the change I made:

 

[root@k4sqi-allstar DummyRepeater]# diff DummyRepeaterThread.cpp.USRP.orig DummyRepeaterThread.cpp

80c80

<                       m_usrpPacket.audio[i] = (short)((audio[i*6]) * 32768.0F /  3.0F);

---

>                       m_usrpPacket.audio[i] = (short)((audio[i*6]) * 32768.0F *  1.5F);

[root@k4sqi-allstar DummyRepeater]#

 

73 de K4SQI!

 

Steve, K4SQI

 

From: G7RPG - Peter Kendall
Sent: Monday, March 19, 2018 12:26 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] ASL>DStar noise problem

 

Steve,

Do you know if it is possible to manipulate the audio levels like you can with analog_bridge, DSTAR>ASL is quite low.

73
Peter

 

On 15/03/18 13:12, G7RPG - Peter Kendall wrote:

BINGO!

That fixed it, thanks Steve.

Its running under ESX and added an 'HD audio' device.

73
Peter

 

On 15/03/18 12:56, Steve N4IRS wrote:

OK, I may have to go back and find that message and edit it. DO you have a real sound device available in those pulldowns? If so select it. If not, can you add a simple sound device like a CM1xx and select it?

Steve

On 3/15/2018 8:53 AM, G7RPG - Peter Kendall wrote:

Hi Steve,

Yes, followed your instructions from a previous post.

Peter

 

On 15/03/18 12:47, Steve N4IRS wrote:

Peter,
I'm pulling this off the top of my head. Do you have the sound device in Dummy Repeater using snd-dummy?

73, Steve

On 3/15/2018 7:59 AM, G7RPG - Peter Kendall wrote:

Hi All,

I've got my Allstar node connected to DStar (DCS005E) using the dvswitch
modified version of dummy repeater.

All seems to be working well apart from a digital burst of noise that is
heard on DStar at the end of a transmission coming from ASL.

I've recorded an example here: https://www.youtube.com/watch?v=APkGjoLxKPk

I wonder if anyone has any suggestions or has come across this before?

73
Peter
G7RPG







 

 

 

 

 



Re: ASL>DStar noise problem

Steven Blackford
 

Peter/Steve,

    I ran into this problem a while back.  Peter, you have to modify the DummyRepeaterThread.cpp file.  The division by 3 drops the audio level pretty low.  So, I modified it to multiple by 1.5 instead.  If increase it to 2.0 or higher, you’ll start getting bad clipping, so I just left it @ 1.5.  It was late in the middle of the night when I looked @ this & it’s probably not the right way to correct the problem, but it has been working here. 😉 Here’s the change I made:

 

[root@k4sqi-allstar DummyRepeater]# diff DummyRepeaterThread.cpp.USRP.orig DummyRepeaterThread.cpp

80c80

<                       m_usrpPacket.audio[i] = (short)((audio[i*6]) * 32768.0F /  3.0F);

---

>                       m_usrpPacket.audio[i] = (short)((audio[i*6]) * 32768.0F *  1.5F);

[root@k4sqi-allstar DummyRepeater]#

 

73 de K4SQI!

 

Steve, K4SQI

 

From: G7RPG - Peter Kendall
Sent: Monday, March 19, 2018 12:26 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] ASL>DStar noise problem

 

Steve,

Do you know if it is possible to manipulate the audio levels like you can with analog_bridge, DSTAR>ASL is quite low.

73
Peter

 

On 15/03/18 13:12, G7RPG - Peter Kendall wrote:

BINGO!

That fixed it, thanks Steve.

Its running under ESX and added an 'HD audio' device.

73
Peter

 

On 15/03/18 12:56, Steve N4IRS wrote:

OK, I may have to go back and find that message and edit it. DO you have a real sound device available in those pulldowns? If so select it. If not, can you add a simple sound device like a CM1xx and select it?

Steve

On 3/15/2018 8:53 AM, G7RPG - Peter Kendall wrote:

Hi Steve,

Yes, followed your instructions from a previous post.

Peter

 

On 15/03/18 12:47, Steve N4IRS wrote:

Peter,
I'm pulling this off the top of my head. Do you have the sound device in Dummy Repeater using snd-dummy?

73, Steve

On 3/15/2018 7:59 AM, G7RPG - Peter Kendall wrote:

Hi All,

I've got my Allstar node connected to DStar (DCS005E) using the dvswitch
modified version of dummy repeater.

All seems to be working well apart from a digital burst of noise that is
heard on DStar at the end of a transmission coming from ASL.

I've recorded an example here: https://www.youtube.com/watch?v=APkGjoLxKPk

I wonder if anyone has any suggestions or has come across this before?

73
Peter
G7RPG







 

 

 

 

 


Re: ASL>DStar noise problem

G7RPG - Peter Kendall
 

Steve,

Do you know if it is possible to manipulate the audio levels like you can with analog_bridge, DSTAR>ASL is quite low.

73
Peter


On 15/03/18 13:12, G7RPG - Peter Kendall wrote:

BINGO!

That fixed it, thanks Steve.

Its running under ESX and added an 'HD audio' device.

73
Peter


On 15/03/18 12:56, Steve N4IRS wrote:
OK, I may have to go back and find that message and edit it. DO you have a real sound device available in those pulldowns? If so select it. If not, can you add a simple sound device like a CM1xx and select it?

Steve

On 3/15/2018 8:53 AM, G7RPG - Peter Kendall wrote:

Hi Steve,

Yes, followed your instructions from a previous post.

Peter


On 15/03/18 12:47, Steve N4IRS wrote:
Peter,
I'm pulling this off the top of my head. Do you have the sound device in Dummy Repeater using snd-dummy?

73, Steve

On 3/15/2018 7:59 AM, G7RPG - Peter Kendall wrote:
Hi All,

I've got my Allstar node connected to DStar (DCS005E) using the dvswitch
modified version of dummy repeater.

All seems to be working well apart from a digital burst of noise that is
heard on DStar at the end of a transmission coming from ASL.

I've recorded an example here: https://www.youtube.com/watch?v=APkGjoLxKPk

I wonder if anyone has any suggestions or has come across this before?

73
Peter
G7RPG














Re: HBLink Parrot Settings

Kim-Benjamin Lütkemeier
 

Okay,
I will try it today in give u a feedback its working or not :-)


Re: HBLink Parrot Settings

Cort N0MJS <n0mjs@...>
 

You’re running two copies of hblink.py:

hb_confbridge.py will call hblink.py underneath it (as a module)
hb_parrot.py will call hblink.py underneath it (as a module)

These are the two programs you should be starting. Nothing else, just hb_confbridge.py and hb_parrot.py

Both of those, as I pointed out in the beginning will instantiate their own copies of hblink.py. You’ll either need duplicate copies of the hblink directory for this, or make sure and call one copy with an alternate configuration file – which id looks like you’re doing with hblink_parrot.cfg – so I assume that hblink.cfg (default name) is what you’re letting hb_confbridge.py get called with.

So, on two the config files. When I read your hblink.cfg file I find:

3 separate HB systems are created:

Global-Master, which is a “master”, listening on all IP interfaces, UDP port 54000
Global-Client, which is a “client” (mimics a repeater), using the loopback interface, UDP port 54021, connecting to a master on same machine, loopback interface, master is on port 54000
Parrot-Client, which is a “client” (mimics a repeater), using the loopback interface, UDP port 54018, connecting to a master on same machine, loopback interface, master is on port 54004

Let’s move on to hblink_parrot.cfg:

I see one HB system created:

Papagei-Master, which is a “master”, listening on all IP interfaces, UDP Port 54004


And I see hb_confbridge_rules.py that connect both clients to each other:

BRIDGES = {
    'hblink': [
            {'SYSTEM': 'Global-Client', 'TS': 2, 'TGID': 9990, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'NONE', 'ON': [], 'OFF': []},
            {'SYSTEM': 'Parrot-Client', 'TS': 2, 'TGID': 9990, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'NONE', 'ON': [], 'OFF': []},
        ]
}


*********************************************

First off, Global Client is completely unnecessary

You only need [Global-Master] and [Parrot-Client] for hb_confbridge.py

Then connect them together with hb_confbridge_py as such:

BRIDGES = {
    'hblink': [
            {'SYSTEM': ‘Global-Master', 'TS': 2, 'TGID': 9990, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'NONE', 'ON': [], 'OFF': []},
            {'SYSTEM': 'Parrot-Client', 'TS': 2, 'TGID': 9990, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'NONE', 'ON': [], 'OFF': []},
        ]
}

I do not know why you’re getting port already in use – clearly someone else is already binding to a port used. I’d check your system to see what process has bound itself to that port.


















On Mar 18, 2018, at 12:56 PM, kbluetkemeier via Groups.Io <kbluetkemeier@...> wrote:

[Edited Message Follows]

Today I try it, but its killed :-(


root@Pi:~/HBlink# ./hb_confbridge.py
DEBUG 2018-03-18 18:58:50,896 Logging system started, anything from here on gets logged
INFO 2018-03-18 18:58:50,897 ID ALIAS MAPPER: 'peer_ids.csv' is current, not downloaded
INFO 2018-03-18 18:58:50,898 ID ALIAS MAPPER: 'subscriber_ids.csv' is current, not downloaded
INFO 2018-03-18 18:58:50,899 ID ALIAS MAPPER: peer_ids dictionary is available
INFO 2018-03-18 18:58:51,781 ID ALIAS MAPPER: subscriber_ids dictionary is available
INFO 2018-03-18 18:58:51,784 ID ALIAS MAPPER: talkgroup_ids dictionary is available
INFO 2018-03-18 18:58:51,786 Routing bridges file found and bridges imported
INFO 2018-03-18 18:58:51,787 ACL file found, importing entries. This will take about 1.5 seconds per 1 million IDs
Killed


maybe you can write step by step ?
How i activate the Parrot in the cofig? I find only the way to start the hb_parrot.py but when I defined two Master on the hblink.cfg and I start the confbridge.py or hblink.py he say the ports a used (its correct!)

thank you
Do1KBL, Kim

--
Cort Buffington
H: +1-785-813-1501
M: +1-785-865-7206






Re: HBLink Parrot Settings

Steve N4IRS
 

Polly want a echo?

On 03/18/2018 03:49 PM, Cort N0MJS wrote:
Yep, I absolutely hat the name. Doesn’t matter. Everyone is going to call it parrot. I’ve had to accept I cannot stop that.

On Mar 18, 2018, at 1:41 PM, Peter M0NWI <peter-martin@outlook.com> wrote:

Cort, I remember you telling me off for calling the echo function the parrot :)

________________________________________
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS <n0mjs@me.com>
Sent: 18 March 2018 18:30:38
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] HBLink Parrot Settings

Maybe you could send your configuration files and I could check them.


On Mar 18, 2018, at 12:56 PM, kbluetkemeier via Groups.Io <kbluetkemeier=yahoo.de@groups.io<mailto:kbluetkemeier=yahoo.de@groups.io>> wrote:


[Edited Message Follows]

Today I try it, but its killed :-(


root@Pi:~/HBlink# ./hb_confbridge.py
DEBUG 2018-03-18 18:58:50,896 Logging system started, anything from here on gets logged
INFO 2018-03-18 18:58:50,897 ID ALIAS MAPPER: 'peer_ids.csv' is current, not downloaded
INFO 2018-03-18 18:58:50,898 ID ALIAS MAPPER: 'subscriber_ids.csv' is current, not downloaded
INFO 2018-03-18 18:58:50,899 ID ALIAS MAPPER: peer_ids dictionary is available
INFO 2018-03-18 18:58:51,781 ID ALIAS MAPPER: subscriber_ids dictionary is available
INFO 2018-03-18 18:58:51,784 ID ALIAS MAPPER: talkgroup_ids dictionary is available
INFO 2018-03-18 18:58:51,786 Routing bridges file found and bridges imported
INFO 2018-03-18 18:58:51,787 ACL file found, importing entries. This will take about 1.5 seconds per 1 million IDs
Killed


maybe you can write step by step ?
How i activate the Parrot in the cofig? I find only the way to start the hb_parrot.py but when I defined two Master on the hblink.cfg and I start the confbridge.py or hblink.py he say the ports a used (its correct!)

thank you
Do1KBL, Kim



--
Cort Buffington
H: +1-785-813-1501
M: +1-785-865-7206







Re: HBLink Parrot Settings

Cort N0MJS <n0mjs@...>
 

Yep, I absolutely hat the name. Doesn’t matter. Everyone is going to call it parrot. I’ve had to accept I cannot stop that.

On Mar 18, 2018, at 1:41 PM, Peter M0NWI <peter-martin@outlook.com> wrote:

Cort, I remember you telling me off for calling the echo function the parrot :)

________________________________________
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS <n0mjs@me.com>
Sent: 18 March 2018 18:30:38
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] HBLink Parrot Settings

Maybe you could send your configuration files and I could check them.


On Mar 18, 2018, at 12:56 PM, kbluetkemeier via Groups.Io <kbluetkemeier=yahoo.de@groups.io<mailto:kbluetkemeier=yahoo.de@groups.io>> wrote:


[Edited Message Follows]

Today I try it, but its killed :-(


root@Pi:~/HBlink# ./hb_confbridge.py
DEBUG 2018-03-18 18:58:50,896 Logging system started, anything from here on gets logged
INFO 2018-03-18 18:58:50,897 ID ALIAS MAPPER: 'peer_ids.csv' is current, not downloaded
INFO 2018-03-18 18:58:50,898 ID ALIAS MAPPER: 'subscriber_ids.csv' is current, not downloaded
INFO 2018-03-18 18:58:50,899 ID ALIAS MAPPER: peer_ids dictionary is available
INFO 2018-03-18 18:58:51,781 ID ALIAS MAPPER: subscriber_ids dictionary is available
INFO 2018-03-18 18:58:51,784 ID ALIAS MAPPER: talkgroup_ids dictionary is available
INFO 2018-03-18 18:58:51,786 Routing bridges file found and bridges imported
INFO 2018-03-18 18:58:51,787 ACL file found, importing entries. This will take about 1.5 seconds per 1 million IDs
Killed


maybe you can write step by step ?
How i activate the Parrot in the cofig? I find only the way to start the hb_parrot.py but when I defined two Master on the hblink.cfg and I start the confbridge.py or hblink.py he say the ports a used (its correct!)

thank you
Do1KBL, Kim



--
Cort Buffington
H: +1-785-813-1501
M: +1-785-865-7206


Re: HBLink Parrot Settings

Peter M0NWI
 

Cort, I remember you telling me off for calling the echo function the parrot :)

________________________________________
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS <n0mjs@me.com>
Sent: 18 March 2018 18:30:38
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] HBLink Parrot Settings

Maybe you could send your configuration files and I could check them.


On Mar 18, 2018, at 12:56 PM, kbluetkemeier via Groups.Io <kbluetkemeier=yahoo.de@groups.io<mailto:kbluetkemeier=yahoo.de@groups.io>> wrote:


[Edited Message Follows]

Today I try it, but its killed :-(


root@Pi:~/HBlink# ./hb_confbridge.py
DEBUG 2018-03-18 18:58:50,896 Logging system started, anything from here on gets logged
INFO 2018-03-18 18:58:50,897 ID ALIAS MAPPER: 'peer_ids.csv' is current, not downloaded
INFO 2018-03-18 18:58:50,898 ID ALIAS MAPPER: 'subscriber_ids.csv' is current, not downloaded
INFO 2018-03-18 18:58:50,899 ID ALIAS MAPPER: peer_ids dictionary is available
INFO 2018-03-18 18:58:51,781 ID ALIAS MAPPER: subscriber_ids dictionary is available
INFO 2018-03-18 18:58:51,784 ID ALIAS MAPPER: talkgroup_ids dictionary is available
INFO 2018-03-18 18:58:51,786 Routing bridges file found and bridges imported
INFO 2018-03-18 18:58:51,787 ACL file found, importing entries. This will take about 1.5 seconds per 1 million IDs
Killed


maybe you can write step by step ?
How i activate the Parrot in the cofig? I find only the way to start the hb_parrot.py but when I defined two Master on the hblink.cfg and I start the confbridge.py or hblink.py he say the ports a used (its correct!)

thank you
Do1KBL, Kim


Re: HBLink Parrot Settings

Cort N0MJS <n0mjs@...>
 

Maybe you could send your configuration files and I could check them.


On Mar 18, 2018, at 12:56 PM, kbluetkemeier via Groups.Io <kbluetkemeier@...> wrote:

[Edited Message Follows]

Today I try it, but its killed :-(


root@Pi:~/HBlink# ./hb_confbridge.py
DEBUG 2018-03-18 18:58:50,896 Logging system started, anything from here on gets logged
INFO 2018-03-18 18:58:50,897 ID ALIAS MAPPER: 'peer_ids.csv' is current, not downloaded
INFO 2018-03-18 18:58:50,898 ID ALIAS MAPPER: 'subscriber_ids.csv' is current, not downloaded
INFO 2018-03-18 18:58:50,899 ID ALIAS MAPPER: peer_ids dictionary is available
INFO 2018-03-18 18:58:51,781 ID ALIAS MAPPER: subscriber_ids dictionary is available
INFO 2018-03-18 18:58:51,784 ID ALIAS MAPPER: talkgroup_ids dictionary is available
INFO 2018-03-18 18:58:51,786 Routing bridges file found and bridges imported
INFO 2018-03-18 18:58:51,787 ACL file found, importing entries. This will take about 1.5 seconds per 1 million IDs
Killed


maybe you can write step by step ?
How i activate the Parrot in the cofig? I find only the way to start the hb_parrot.py but when I defined two Master on the hblink.cfg and I start the confbridge.py or hblink.py he say the ports a used (its correct!)

thank you
Do1KBL, Kim


Re: HBLink Parrot Settings

Kim-Benjamin Lütkemeier
 
Edited

Today I try it, but its killed :-(


root@Pi:~/HBlink# ./hb_confbridge.py
DEBUG 2018-03-18 18:58:50,896 Logging system started, anything from here on gets logged
INFO 2018-03-18 18:58:50,897 ID ALIAS MAPPER: 'peer_ids.csv' is current, not downloaded
INFO 2018-03-18 18:58:50,898 ID ALIAS MAPPER: 'subscriber_ids.csv' is current, not downloaded
INFO 2018-03-18 18:58:50,899 ID ALIAS MAPPER: peer_ids dictionary is available
INFO 2018-03-18 18:58:51,781 ID ALIAS MAPPER: subscriber_ids dictionary is available
INFO 2018-03-18 18:58:51,784 ID ALIAS MAPPER: talkgroup_ids dictionary is available
INFO 2018-03-18 18:58:51,786 Routing bridges file found and bridges imported
INFO 2018-03-18 18:58:51,787 ACL file found, importing entries. This will take about 1.5 seconds per 1 million IDs
Killed


maybe you can write step by step ?
How i activate the Parrot in the cofig? I find only the way to start the hb_parrot.py but when I defined two Master on the hblink.cfg and I start the confbridge.py or hblink.py he say the ports a used (its correct!)

thank you
Do1KBL, Kim


Re: HBLink Parrot Settings

Cort N0MJS <n0mjs@...>
 

I think you bay be confused about how the pieces work.

If you’re running confbridge.py and hb_parrot.py, there is no need to run hblink.py on it’s own. 

On Mar 17, 2018, at 1:45 PM, kbluetkemeier via Groups.Io <kbluetkemeier@...> wrote:

I test today but I have no funktion

I Create one Master (Globale Master) here are connecting the MMDVM Hotspots Port 54000 (Start hblink.py)
Than I Create a snd Master (Parrot Master) with the port 54004 (start: hb_parrot.py)

On the first globale Master hblink.cfg I have two client

client-1 connect to the Gloable Master
client-2 connect to the Parrot Master

on the hb_confbridge_rules i write:

BRIDGES = {
    'HBlink': [
            {'SYSTEM': 'client-1',       'TS': 2, 'TGID': 9990, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'NONE', 'ON': [], 'OFF': []},
            {'SYSTEM': 'client-2',       'TS': 2, 'TGID': 9990, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'NONE', 'ON': [], 'OFF': []},
        ]
}

I start the hb_confbridge.py he write me over one million he need 1.5 seconds an thats all.

But no communication between Globale Master and Parrot Master :-(



--
Cort Buffington
H: +1-785-813-1501
M: +1-785-865-7206






Re: HBLink Parrot Settings

Kim-Benjamin Lütkemeier
 

I test today but I have no funktion

I Create one Master (Globale Master) here are connecting the MMDVM Hotspots Port 54000 (Start hblink.py)
Than I Create a snd Master (Parrot Master) with the port 54004 (start: hb_parrot.py)

On the first globale Master hblink.cfg I have two client

client-1 connect to the Gloable Master
client-2 connect to the Parrot Master

on the hb_confbridge_rules i write:

BRIDGES = {
    'HBlink': [
            {'SYSTEM': 'client-1',       'TS': 2, 'TGID': 9990, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'NONE', 'ON': [], 'OFF': []},
            {'SYSTEM': 'client-2',       'TS': 2, 'TGID': 9990, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'NONE', 'ON': [], 'OFF': []},
        ]
}

I start the hb_confbridge.py he write me over one million he need 1.5 seconds an thats all.

But no communication between Globale Master and Parrot Master :-(



HBLink Parrot Settings

Kim-Benjamin Lütkemeier
 

Hello,
I have one Question. How i can configurate a HBLink master with Parrot in TG9990

I start hb_parrot.py and he repeat everythink.

Normal I have the Master on hblink.cfg on this master my frinds are connected with DVMega or openspot. its working without problem.
Now i will activate the Parrot in this network. When he made a group call to 9990 the Parrot will repeat. On all other groups he do nothing.

But I dont understand how i can made it.

Anyone can help me?

73,
Do1KBL


dmr_utils update

Cort N0MJS <n0mjs@...>
 

Folks,

DMR-MARC is changing their database API to only support json format. To this point, dmr_utils has used csv. The next update I push to dmr_utils will be a fix for this. I’m testing it now, expect the push in the next couple of days.

Cort Buffington
785-865-7206


Re: NEW to HBlink and python

Steve N4IRS
 

No, the parrot is not installed by default, you will have to configure it. See the config for your options on how to run it.

Steve

On 3/16/2018 9:28 AM, Guillaume Larouche wrote:
Problem was VPS issue...a put new image of debian jessy and all is running now...

Time to play with HBlink

STeve, is the parrot is running per default?  in the csv it look like to be set on TG 9998, an not private call...it is the case ?


Re: NEW to HBlink and python

Guillaume Larouche
 

Problem was VPS issue...a put new image of debian jessy and all is running now...

Time to play with HBlink

STeve, is the parrot is running per default?  in the csv it look like to be set on TG 9998, an not private call...it is the case ?


Re: NEW to HBlink and python

Guillaume Larouche
 

On Tue, Mar 13, 2018 at 06:22 pm, Steve N4IRS wrote:
I suggest you check your DNS (ping http://pypi.python.org

Hi Steve, sorry for the delay,

I juste cheked on my VPS and for an unknow reason...the VPS can't reach pyton.org.  VPS is in a big data center... will check and let you know.

I will try locally on a RPI .

Thank for your help


Re: ASL>DStar noise problem

Steve N4IRS
 

Cool,
Sorry for the initial misinformation. I should have gone back and revised that. I know that making DummyRepeater run headless etc is a pain. We will be replacing it with a MUCH simpler solution. Mike and I are discussing it at least once a day.

Steve

On 3/15/2018 9:12 AM, G7RPG - Peter Kendall wrote:

BINGO!

That fixed it, thanks Steve.

Its running under ESX and added an 'HD audio' device.

73
Peter


On 15/03/18 12:56, Steve N4IRS wrote:
OK, I may have to go back and find that message and edit it. DO you have a real sound device available in those pulldowns? If so select it. If not, can you add a simple sound device like a CM1xx and select it?

Steve

On 3/15/2018 8:53 AM, G7RPG - Peter Kendall wrote:

Hi Steve,

Yes, followed your instructions from a previous post.

Peter


On 15/03/18 12:47, Steve N4IRS wrote:
Peter,
I'm pulling this off the top of my head. Do you have the sound device in Dummy Repeater using snd-dummy?

73, Steve

On 3/15/2018 7:59 AM, G7RPG - Peter Kendall wrote:
Hi All,

I've got my Allstar node connected to DStar (DCS005E) using the dvswitch
modified version of dummy repeater.

All seems to be working well apart from a digital burst of noise that is
heard on DStar at the end of a transmission coming from ASL.

I've recorded an example here: https://www.youtube.com/watch?v=APkGjoLxKPk

I wonder if anyone has any suggestions or has come across this before?

73
Peter
G7RPG














Re: ASL>DStar noise problem

G7RPG - Peter Kendall
 

BINGO!

That fixed it, thanks Steve.

Its running under ESX and added an 'HD audio' device.

73
Peter


On 15/03/18 12:56, Steve N4IRS wrote:
OK, I may have to go back and find that message and edit it. DO you have a real sound device available in those pulldowns? If so select it. If not, can you add a simple sound device like a CM1xx and select it?

Steve

On 3/15/2018 8:53 AM, G7RPG - Peter Kendall wrote:

Hi Steve,

Yes, followed your instructions from a previous post.

Peter


On 15/03/18 12:47, Steve N4IRS wrote:
Peter,
I'm pulling this off the top of my head. Do you have the sound device in Dummy Repeater using snd-dummy?

73, Steve

On 3/15/2018 7:59 AM, G7RPG - Peter Kendall wrote:
Hi All,

I've got my Allstar node connected to DStar (DCS005E) using the dvswitch
modified version of dummy repeater.

All seems to be working well apart from a digital burst of noise that is
heard on DStar at the end of a transmission coming from ASL.

I've recorded an example here: https://www.youtube.com/watch?v=APkGjoLxKPk

I wonder if anyone has any suggestions or has come across this before?

73
Peter
G7RPG












9001 - 9020 of 9891