Date   

Re: MMDVM_Bridge Crashes as part of P25 <-> DMR link #mmdvm_bridge

Steve N4IRS
 

I would like to setup a schedule to capture data rather then just filling a log with data hoping for a sample transmission. Can you get this scheduled?

Steve

On 4/7/2021 8:57 AM, Andrew Lynch wrote:
Steve - any luck with the watch on the P25 Reflector? I think Sunday morning when you reconnected we had a few crashes between me and K2KLN. Unfortunately all this P25 testing revealed another issue where my hotspot will "double" traffic on P25, which I nailed down Sunday morning as well. I have still yet to see it crash with hotspot traffic, only traffic from the N0PBA repeater link to the P25Reflector. 

I did update MMDVM_Bridge to 1.6.5 20210331 but doesn't seem to have had any effect.

Thanks!
-Andy, KDØIOE


Re: MMDVM_Bridge Crashes as part of P25 <-> DMR link #mmdvm_bridge

Andrew Lynch
 

Steve - any luck with the watch on the P25 Reflector? I think Sunday morning when you reconnected we had a few crashes between me and K2KLN. Unfortunately all this P25 testing revealed another issue where my hotspot will "double" traffic on P25, which I nailed down Sunday morning as well. I have still yet to see it crash with hotspot traffic, only traffic from the N0PBA repeater link to the P25Reflector. 

I did update MMDVM_Bridge to 1.6.5 20210331 but doesn't seem to have had any effect.

Thanks!
-Andy, KDØIOE


Re: What 4G LTE Broadband Modem???

Brad N8PC
 

Most just use there cell phone as there Mobile Hotspot.  Some providers have Mobile MiFi hot spots. you really don't need more than 3g connection as your just doing voice. with the Mifi it would be an add on line as it would have it's own number.  if your using your cell phone as a hotspot then it would use the data part of the bill.

On 4/6/2021 4:54 PM, wrhowell@... wrote:

What 4G LTE Broadband Modem (or other modem) are many of you using in your vehicles that allows for you to take advantage of your MMDVM or allstarlink node?

And does the use of it appear to your service provider as a "hot spot" or as just another phone on your plan?

Trying to help a friend that travels most of the time get a  "mobile" node operational.

 

Thank you,

William




Re: Mobile App Database Update for ALS Node List

Steve N4IRS
 

Alan,
I assume you mean the AllStar node list. To do that while connected to a AllStar node requires the node be setup to process the DBUpdate macro. The easiest thing to do is to connect to node 100. You will find node 100 at the bottom f you account list. I have setup 100 to upload a fresh node list to the client. You will see a toast (popup) telling you download had completed.

Steve N4IRS


Re: Allmon2 / Asterisk

me@...
 

Likely just a username/password issue or a misconfiguration in allmon.ini.php. Make sure:

host= 
is set to 
host=127.0.0.1:5038

Verify user= and passwd= match the settings in /etc/asterisk/manager.conf
A correct configuration should look like this:

[general]
displaysystemname = yes
enabled = yes
;webenabled = yes
port = 5038
 
bindaddr = 127.0.0.1   ; Local interface only!
displayconnects = yes
 
[admin]
secret = 2rzm3sove5
read = all,system,call,log,verbose,command,agent,user,config
write = all,system,call,log,verbose,command,agent,user,config

Cheers,
Rob KK9ROB
 


Mobile App Database Update for ALS Node List

Alan
 

In the mobile app there's a button on the config page Update Database Files.. it objects if not connected to a node and beeps if you are. But nothing gets updated - so it appears
The node list in the app is old, node descriptions are all old, callsigns are old.
How do you update the node list in the App?
Alan


What 4G LTE Broadband Modem???

wrhowell amphibiansolutions.us
 

What 4G LTE Broadband Modem (or other modem) are many of you using in your vehicles that allows for you to take advantage of your MMDVM or allstarlink node?

And does the use of it appear to your service provider as a "hot spot" or as just another phone on your plan?

Trying to help a friend that travels most of the time get a  "mobile" node operational.

 

Thank you,

William


Re: DVS install on Hytera PNC380 ?

Allister
 

Thanks to Steve the group for the help and suggestions in getting this all working properly,

It's an awesome bit of software on a pretty nice hardware platform. 

Quite impressed so far, just a bit of fine tuning needed to get it the way I want . 

Allister GM7RYR 


Re: DVS install on Hytera PNC380 ?

Allister
 

Thanks for that Steve, 

Email sent off last night . 

Look forward to getting the system working on the Hytera hardware, I think it will be a nice combination. 
 


Re: DVS install on Hytera PNC380 ?

Steve N4IRS
 

Send the full UUID to dvswitch.inad@... I'll tell you how to send payment and send you the code you need.

Steve N4IRS

On 4/4/21 5:18 PM, Allister wrote:
Well I am delighted to report that I have the 1.61 version of DVSwitch installed on the Hytera PNC 380. 

It's accepting all my DMR ID and call sign as well as registering with my server,  so that's all very encouraging. 

I now have the message : 
Google Play Store not available. 
Contact DVSwitch with this String 
UUID=927d0630c548 xxx  ( xxx in place of the actual values) 

What is the recommended way to contact DVSwitch ? 



Re: DVS install on Hytera PNC380 ?

Allister
 

Well I am delighted to report that I have the 1.61 version of DVSwitch installed on the Hytera PNC 380. 

It's accepting all my DMR ID and call sign as well as registering with my server,  so that's all very encouraging. 

I now have the message : 
Google Play Store not available. 
Contact DVSwitch with this String 
UUID=927d0630c548 xxx  ( xxx in place of the actual values) 

What is the recommended way to contact DVSwitch ? 


Re: MMDVM_Bridge Crashes as part of P25 <-> DMR link #mmdvm_bridge

Andrew Lynch
 

Update: I had about an hour conversation over the P25 Reflector that ended up crashing multiple times on 4/2 at about 9pm CDT. I grabbed the logs from both P25Reflector and MMDVM_Bridge. They're on GMT so -5 is the offset.

One thing I noticed was that traffic from the Quantar repeaters (N0PBA is the gateway callsign) always ends with "network watchdog timed out" whereas traffic from me via a hotspot ends with "Network end of transmission". 

Link to logs: https://cloud.kd0ioe.com/index.php/s/gr78QQiwJyWY8Rm


Mic Gain Setting

dk5rq@...
 

Hello,

I observe different Mic Gain in the different modes. I start in DMR, switch to NXDN for example. When I switch back to DMR the Mic Gain is too low. I have to restart the Analog_Bridge and the gain is back to normal.
Is there any way to adjust Mic Gain for every mode seperately?

Rudi DK5RQ


Speed

N4UPC - Scott
 

I am running a DVSwitch server (latest release I believe) that only has Analog Bridge <—> MMDVM Bridge on BM DMR. All other modes are disabled. I’m connecting to an ASL node (RasPi 4b) to send & receive the audio from the Analog Bridge. The server is running on an i7 processor with 8GB of memory, an SSD disk and uses a hardware fob in a 3.0 USB port to encode/decode the DMR. Both the server and the node are on the same network and the same gigabit switch.

I have noticed that the server audio lags the audio on another ASL that I’m using as a monitor by 2-3 seconds. My question is if there is anything I can do to lower the delay? I’d like to get it as real-time as possible. The audio sounds great so I don’t want to mess that up!

73,
Scott
N4UPC


Re: Installing DVSwitch-Dashboard on top of existing DVSwitch/Quantar-Bridge Install

Steve D. Jones
 

I went through the same thing yesterday. Ended up doing a fresh install and still had the same issue.

In the end, I think what fixed it was an apt update followed by an apt upgrade after I got the pi imaged.

The only other problem I encountered was installing php5 for the dashboard. Ended up just installing php which seems to have given me php7.

On Apr 2, 2021, at 12:19 PM, Steve N4IRS <szingman@msgstor.com> wrote:

 Steve,
Something does not sound quite right. Please show the output of apt update.

Steve N4IRS

On 4/2/2021 11:26 AM, Steve D. Jones via groups.io wrote:
I'm currently running dvswitch and Quantar-Bridge and would like to add a dashboard. Looks like the initial install I did didn't include the dashboard server.

I backed up my existing install with the intention of installing the complete dvswitch-server repository but I'm getting hung up on installing it.

The apt-get command can't find the package "Unable to locate package dvswitch-server". My sources.list file shows only one source, raspbian.raspberry.org. Is there another source I need to add to be able to install the new server?


Re: How to update DMRIDs.dat

Steve N4IRS
 

They do, updating the data files is not a core element.

On 4/2/2021 2:45 PM, IK7VXC Mike wrote:
Thanks Steve. I thought they shared the same core elements.

Mike IK7VXC


Re: How to update DMRIDs.dat

IK7VXC Mike
 

Thanks Steve. I thought they shared the same core elements.

Mike IK7VXC


Re: How to update DMRIDs.dat

Steve N4IRS
 

Mike,
I have no idea. We don't use DVlink. I suggest you ask them.

On 4/2/2021 2:37 PM, IK7VXC Mike wrote:
On 2 Raspberry Pis I run both Dvswitch server and Dvlink. 
On the dvswitch server the dmrids.dat seems updated (I searched for my talker alias - which is relatively new) and it's there. On the other hand the dvlink' dmrids.dat is NOT updated (my talker alias and others are missing).

Is there a special command I can use to update the dmrids.dat file?

Thanks
Mike IK7VXC


How to update DMRIDs.dat

IK7VXC Mike
 
Edited

On 2 Raspberry Pis I run both Dvswitch server and Dvlink. 
On the dvswitch server the dmrids.dat seems updated (I searched for my talker alias - which is relatively new - and it's there). On the other hand the dvlink' dmrids.dat is NOT updated (my talker alias and others are missing).

Is there a special command I can use to update the dmrids.dat file?

Thanks
Mike IK7VXC


Re: Installing DVSwitch-Dashboard on top of existing DVSwitch/Quantar-Bridge Install

Steve N4IRS
 

Steve,
Something does not sound quite right. Please show the output of apt update.

Steve N4IRS

On 4/2/2021 11:26 AM, Steve D. Jones via groups.io wrote:
I'm currently running dvswitch and Quantar-Bridge and would like to add a dashboard. Looks like the initial install I did didn't include the dashboard server.

I backed up my existing install with the intention of installing the complete dvswitch-server repository but I'm getting hung up on installing it.

The apt-get command can't find the package "Unable to locate package dvswitch-server". My sources.list file shows only one source, raspbian.raspberry.org. Is there another source I need to add to be able to install the new server?

721 - 740 of 9774