Date   

Re: DMR glitch on talk group 3142

Robert Rodriguez
 

  This is not a public bridge, but rather similar to a hotspot connection for local use. How is that
different from say, an Openspot 3 with cross mode 
capability coming in via Fusion or D-star to DMR. Those seem to be ok or if they’re not, it hasn’t been 
publicized much.


Re: DMR glitch on talk group 3142

Corey Dean N3FE
 

Have you read the USA section of the bm wiki?  Many of the cbridge based networks that bm is a guest to doesn’t want any type of cross mode.  The clearnode translates analog to dmr therefore is a cross mode.  As a guest to those networks and keep the two different networks linked and happy cross modes should not happen.   Since we are a guest we will follow their wishes on 3142.


On Apr 13, 2021, at 9:39 PM, Robert Rodriguez via groups.io <robertr64@...> wrote:

   I finally figured out how to add DMR master servers to the ClearNode configuration on the iPhone.
Talk group 3142 had the same issue on all 3 US servers, but it seems to be all right on Canada server 
3021. I still can’t figure what’s wrong on
the Brandmeister side.


Re: DMR glitch on talk group 3142

Robert Rodriguez
 

   I finally figured out how to add DMR master servers to the ClearNode configuration on the iPhone.
Talk group 3142 had the same issue on all 3 US servers, but it seems to be all right on Canada server 
3021. I still can’t figure what’s wrong on
the Brandmeister side.


Re: Adding XLX Reflector

David - W9DWH
 

Sorry Doug.  I've been running Pi-Star for many a moon but I'm still fairly new to DVS.  What I would like to try to do is add XLX functionality, without losing  any of the other modes, like can be done with Pi-Star.  If necessary I would settle for the just the one XLX reflector, that we use locally, rather than all of them.  I'm also willing to give up the D-Star mode, to accommodate it if necessary.  When I tried the example you provided I did not see it register on the XLX217 dashboard.   
    


Re: Adding XLX Reflector

Doug - W4DBG
 

Not enough information for me. 

I thought you were tying to do one thing. Do you see it logging into the XLX?



On Mon, Apr 12, 2021 at 8:19 AM David - W9DWH via groups.io <dwh0305=aol.com@groups.io> wrote:
Thanks Doug.  This is not working for me either though.  Before I go any further do I need to choose between Brandmeister, and the XLX reflector, since there is already an instance of [DMR Network] which already contains the BM setup? 

--
Doug Gooden
troytrojan@...


Re: Adding XLX Reflector

David - W9DWH
 

Thanks Doug.  This is not working for me either though.  Before I go any further do I need to choose between Brandmeister, and the XLX reflector, since there is already an instance of [DMR Network] which already contains the BM setup? 


Re: Adding XLX Reflector

Doug - W4DBG
 

[DMR Network]
Enable=1
Address=IP OF XLX REFLECTOR
Port=62030
Jitter=360
Local=62032
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
Options=XLX:4001
Slot1=0
Slot2=1
Debug=0

On Sun, Apr 11, 2021 at 6:17 PM David - W9DWH via groups.io <dwh0305=aol.com@groups.io> wrote:
It's still not making sense to me yet.  I followed the directions:

[DMR Network]
Enable=1
Address=74.91.114.19
Port=62031
Jitter=360
Local=62032
Password=*********
# for XLX the syntax is: Options=XLX:4009
Options=XLX:4009
Slot1=0
Slot2=1
Debug=0

Needless to say it's not working.  First of all there's nothing I can see that is pointing it to the XLX reflector I want to use (217 Module A). Brandmeister stopped using reflectors so I'm not sure if this is the problem or not. 

--
Doug Gooden
troytrojan@...


Re: Adding XLX Reflector

David - W9DWH
 

It's still not making sense to me yet.  I followed the directions:

[DMR Network]
Enable=1
Address=74.91.114.19
Port=62031
Jitter=360
Local=62032
Password=*********
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
Options=XLX:4009
Slot1=0
Slot2=1
Debug=0

Needless to say it's not working.  First of all there's nothing I can see that is pointing it to the XLX reflector I want to use (217 Module A). Brandmeister stopped using reflectors so I'm not sure if this is the problem or not. 


Re: Adding XLX Reflector

Steve N4IRS
 

1: in MMDVM_Bridge.ini
2: manually
3: I believe module A would be 4001

On 4/11/21 4:09 PM, David - W9DWH via groups.io wrote:
Thanks. I have a few more questions though:

1.) Where I do I enter this information?  
2.) Do I add it using the GUI or do I need to add it manually?
3.) How do I select the module (we're using "A") ?


Re: Adding XLX Reflector

David - W9DWH
 

Thanks. I have a few more questions though:

1.) Where I do I enter this information?  
2.) Do I add it using the GUI or do I need to add it manually?
3.) How do I select the module (we're using "A") ?


moderated Re: Compile Error in M172DMR - md380_vocoder.h missing

Steve N4IRS
 

Jeff,
I suggest you ask in the github area.

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Jeff - WA3PNY via groups.io <bauerjv@...>
Sent: Sunday, April 11, 2021 12:58:27 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: [DVSwitch] Compile Error in M172DMR - md380_vocoder.h missing
 
I must be missing something obvious, I git cloned the Nostar branch of MMDVM_CM, and am attempting to compile M172DMR module, and it errors out not finding md380_vocoder.h  I'm compiling on a HP server, and a bunch of md380_vocoders seem to be nailed into ARM.  Here is what I am seeing:

bauerjv@penn-link4:~/Downloads/M17/MMDVM_CM/M172DMR$ sudo make
g++ -g -O3 -Wall -std=c++0x -pthread -c -o BPTC19696.o BPTC19696.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o Conf.o Conf.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CRC.o CRC.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DelayBuffer.o DelayBuffer.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRData.o DMRData.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMREMB.o DMREMB.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMREmbeddedData.o DMREmbeddedData.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRFullLC.o DMRFullLC.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRLC.o DMRLC.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRLookup.o DMRLookup.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRNetwork.o DMRNetwork.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRSlotType.o DMRSlotType.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o M17Network.o M17Network.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o Golay2087.o Golay2087.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o Golay24128.o Golay24128.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o Hamming.o Hamming.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o Log.o Log.cpp
g++    -c -o mbeenc.o mbeenc.cc
cc -g -O3 -Wall -std=c++0x -pthread   -c -o ambe.o ambe.c
cc1: warning: command line option ‘-std=c++11’ is valid for C++/ObjC++ but not for C
g++ -g -O3 -Wall -std=c++0x -pthread -c -o MBEVocoder.o MBEVocoder.cpp
MBEVocoder.cpp:21:10: fatal error: md380_vocoder.h: No such file or directory
   21 | #include <md380_vocoder.h>
      |          ^~~~~~~~~~~~~~~~~
compilation terminated.
make: *** [Makefile:19: MBEVocoder.o] Error 1

Many thanks -- Jeff


moderated Compile Error in M172DMR - md380_vocoder.h missing

Jeff - WA3PNY
 

I must be missing something obvious, I git cloned the Nostar branch of MMDVM_CM, and am attempting to compile M172DMR module, and it errors out not finding md380_vocoder.h  I'm compiling on a HP server, and a bunch of md380_vocoders seem to be nailed into ARM.  Here is what I am seeing:

bauerjv@penn-link4:~/Downloads/M17/MMDVM_CM/M172DMR$ sudo make
g++ -g -O3 -Wall -std=c++0x -pthread -c -o BPTC19696.o BPTC19696.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o Conf.o Conf.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o CRC.o CRC.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DelayBuffer.o DelayBuffer.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRData.o DMRData.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMREMB.o DMREMB.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMREmbeddedData.o DMREmbeddedData.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRFullLC.o DMRFullLC.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRLC.o DMRLC.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRLookup.o DMRLookup.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRNetwork.o DMRNetwork.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o DMRSlotType.o DMRSlotType.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o M17Network.o M17Network.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o Golay2087.o Golay2087.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o Golay24128.o Golay24128.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o Hamming.o Hamming.cpp
g++ -g -O3 -Wall -std=c++0x -pthread -c -o Log.o Log.cpp
g++    -c -o mbeenc.o mbeenc.cc
cc -g -O3 -Wall -std=c++0x -pthread   -c -o ambe.o ambe.c
cc1: warning: command line option ‘-std=c++11’ is valid for C++/ObjC++ but not for C
g++ -g -O3 -Wall -std=c++0x -pthread -c -o MBEVocoder.o MBEVocoder.cpp
MBEVocoder.cpp:21:10: fatal error: md380_vocoder.h: No such file or directory
   21 | #include <md380_vocoder.h>
      |          ^~~~~~~~~~~~~~~~~
compilation terminated.
make: *** [Makefile:19: MBEVocoder.o] Error 1

Many thanks -- Jeff


Re: Adding XLX Reflector

Steve N4IRS
 

On 4/10/21 4:05 PM, David - W9DWH via groups.io wrote:
Our local System Fusion repeater runs a Wires-X room.  Rather than set up a YSF or FCS reflector it was decided an XLX reflector would be used instead.  That way it's Wires-X room can also be accessed via DMR, D-Star, etc.

Setting up the XLX reflector on Pi-Star was a breeze.  However, since XLX is not native to DVS I'm trying to figure out how to add it.  I've done some research, here in the group, but a lot of info I've found so far is outdated now. I also keep seeing info that references Brandmeister and I don't need any connectivity directly from XLX to BM.  Therefore I'm a little lost at the moment. Is there an updated tutorial anywhere that will lead me through adding XLX connectivity only? 


Adding XLX Reflector

David - W9DWH
 

Our local System Fusion repeater runs a Wires-X room.  Rather than set up a YSF or FCS reflector it was decided an XLX reflector would be used instead.  That way it's Wires-X room can also be accessed via DMR, D-Star, etc.

Setting up the XLX reflector on Pi-Star was a breeze.  However, since XLX is not native to DVS I'm trying to figure out how to add it.  I've done some research, here in the group, but a lot of info I've found so far is outdated now. I also keep seeing info that references Brandmeister and I don't need any connectivity directly from XLX to BM.  Therefore I'm a little lost at the moment. Is there an updated tutorial anywhere that will lead me through adding XLX connectivity only? 


Re: DMR glitch on talk group 3142

Robert Rodriguez
 

It doesn’t look like the ClearNode lets me change servers, except for TGIF. I might be able to do it on the Linux config files directly. Oddly, I can receive your group 31679 ok on the 3103 server. Could be some bug with Brandmeister.

Bob Rodriguez
Kc3lyz


Re: Weird popup message

IK7VXC Mike
 

Thank you, Mike!


Re: DMR glitch on talk group 3142

Patrick Perdue
 

Have you tried another Brandmeister server? I have the same problem with another talkgroup, 31679, through server 3101, and it has nothing to do with DVSwitch, as I am using a hotspot and a DMR radio.

However, if I use 3021 instead, everything is fine. 3021 is in Canada, but it is the closest to me network-wise other than 3101, which is right in my back yard, so I often use that one rather than any of the U.S. servers.

Since I run the bridge for that talkgroup, I find this to be really strange, since my stuff is connected directly to 3101 through an interlink, but whatever.


On 4/9/2021 2:26 PM, Robert Rodriguez via groups.io wrote:
     I have a ClearNode AllStar node that uses a DVSwitch bridge to get to DMR via Brandmeister server 3103 in the US. For some reason, in the last 2 or 3 weeks, 
if I connect to talk group 3142 (Pennsylvania state-wide), I only hear the first transmission. If I re-key or reconnect, then I will hear one more each time, but it doesn't seem to stay on the group like you
would need for a net. We have our net on Tuesday nights at 8PM Eastern. The same talk group is ok via Openspot3 or one of the phone apps like DroidStar, and I haven't seen this problem on other talk
groups I use regularly via the ClearNode. I already checked with the ClearNode developer and he says everything looks ok on his end.

Any idea what's going wrong?

Bob Rodriguez
kc3lyz 


DMR glitch on talk group 3142

Robert Rodriguez
 

     I have a ClearNode AllStar node that uses a DVSwitch bridge to get to DMR via Brandmeister server 3103 in the US. For some reason, in the last 2 or 3 weeks, 
if I connect to talk group 3142 (Pennsylvania state-wide), I only hear the first transmission. If I re-key or reconnect, then I will hear one more each time, but it doesn't seem to stay on the group like you
would need for a net. We have our net on Tuesday nights at 8PM Eastern. The same talk group is ok via Openspot3 or one of the phone apps like DroidStar, and I haven't seen this problem on other talk
groups I use regularly via the ClearNode. I already checked with the ClearNode developer and he says everything looks ok on his end.

Any idea what's going wrong?

Bob Rodriguez
kc3lyz 


Re: Weird popup message

Mike Zingman - N4IRR
 

I will look into it.


Weird popup message

IK7VXC Mike
 
Edited

Hi. On one of my smartphones with the latest Dvswitch mobile version whenever I key up I get the folloing popup message (please see pic)
https://ibb.co/zVhxwNh 
Where is this log?
For the rest everything works just fine. So is it important?  How do I get rid of it?

Thanks
Mike IK7VXC

801 - 820 of 9882