Date   

Re: DMR Master?

Steve N4IRS
 

So,
DVSM and the web interface are working completely? TX, RX and tune?

On 6/11/21 8:19 PM, Bryan Johnson wrote:
I changed to TG91 from web server, and it automatically changed to TG91 in dvs mobile, so I would say that part it working now.


Re: DMR Master?

Steve N4IRS
 

I don't need the if you can TX, RX and tune from DVSM and from the web interface. Is that correct?
The log file is /var/log/dvswitch/Analog_Reflector.log as defined in Analog_Reflector.json

On 6/11/21 8:16 PM, Bryan Johnson wrote:
I hear audio now on web server when tx from dvs mobile, and vice versa. Callsign file worked and let me login. I can also steer TG's from dvs mobile now. Is the log file the larger file above AR.json?


Re: DMR Master?

Bryan Johnson
 

I changed to TG91 from web server, and it automatically changed to TG91 in dvs mobile, so I would say that part it working now.


Re: DMR Master?

Bryan Johnson
 

I hear audio now on web server when tx from dvs mobile, and vice versa. Callsign file worked and let me login. I can also steer TG's from dvs mobile now. Is the log file the larger file above AR.json?


Re: DMR Master?

Steve N4IRS
 

Keep the password simple for now.

On 6/11/21 8:00 PM, Bryan Johnson wrote:
web interface won't let me log in. authentication fails. tried editing callsign.json to no avail.


Re: DMR Master?

Steve N4IRS
 

You can not edit it. You will have to recreate it.

On 6/11/21 8:00 PM, Bryan Johnson wrote:
web interface won't let me log in. authentication fails. tried editing callsign.json to no avail.


Re: DMR Master?

Bryan Johnson
 

web interface won't let me log in. authentication fails. tried editing callsign.json to no avail.


Re: DMR Master?

Bryan Johnson
 

I noticed the directions mention an amiport in the Allstar node portion, but there is none in my .json file.


Re: DMR Master?

Steve N4IRS
 

What happens when you use the web interface to control the server?
Please post the Analog_Reflector.log when you connect from DVSM and try to transmit and tune.

On 6/11/21 7:34 PM, Bryan Johnson wrote:
K


Re: DMR Master?

Bryan Johnson
 

K


Re: DMR Master?

Steve N4IRS
 

Show me your Analog_Reflector.json

On 6/11/21 6:03 PM, Bryan Johnson wrote:
I set up the .json file for just the basics, using port 12345 for the mobile app as in the setup example. When I connect, DVS mobile says "K6RBJ joining reflector" but I have no PTT nor TG steering. When I change the DVS mobile port to 31001, I have PTT (can hear my tx thru DVS Dashboard) and TG steering. Don't get why it doesn't work using the mobile port but works using the USRP port.

DVS hUC doesn't allow me to do anything in the way of changing TG's or PTT (says I do not have transmit rights).

Now no audio either way between Hamvoip server and DVS server. Was one way as I mentioned earlier, but not both ways like I had going last night.


Re: DMR Master?

Bryan Johnson
 

I set up the .json file for just the basics, using port 12345 for the mobile app as in the setup example. When I connect, DVS mobile says "K6RBJ joining reflector" but I have no PTT nor TG steering. When I change the DVS mobile port to 31001, I have PTT (can hear my tx thru DVS Dashboard) and TG steering. Don't get why it doesn't work using the mobile port but works using the USRP port.

DVS hUC doesn't allow me to do anything in the way of changing TG's or PTT (says I do not have transmit rights).

Now no audio either way between Hamvoip server and DVS server. Was one way as I mentioned earlier, but not both ways like I had going last night.


Re: DMR Master?

Bryan Johnson
 

K. Had to step out for a bit. Working on it all now.

Thanks, Bryan


Re: DMR Master?

Steve N4IRS
 

OK,
You do not need the LAN addresses for the 2 local nodes 54464 and 1999 but for now we will leave then as is.
On your DVSwitch Server, edit /opt/Analog_Bridge.ini
In the [USRP] stanza make these changes:

txPort = 31001                          ; Transmit USRP frames on this port
rxPort = 31001                          ; Listen for USRP frames on this port

Yes, you will loose access from the Android app (you will get it back)
on the DVSwitch Server as root:
apt update
apt upgrade

If any updates are applied, reboot.

Log back into DVSwitch Server
As root:
apt install analog-reflector
You will now configure Analog_Reflector <https://server.dvswitch.org/documents/Analog_Reflector.pdf>
Keep it simple:
generate the ssl keys
add your user
change the mobilePort in Analog_Reflector.json to match your port settings in DVSwitch Mobile

You should again have access to DVSwitch Server from DVSwitch Mobile.
You can also play with the web interface of Analog_Reflector.

If you run into a problem, stop and ask. Once this is complete, we will connect the 2 servers together.
I will be unavailable until 7:00 PM tonight.

Steve N4IRS




On 6/11/2021 3:31 PM, Bryan Johnson wrote:
K. Thanks!


Re: DMR Master?

Bryan Johnson
 

K. Thanks!


Re: DMR Master?

Bryan Johnson
 

FYI, Two way audio went away since last night. I can hear audio on my BM TG3176651 when I tx from my analog 2m repeater. No return audio over the repeater when I tx via DMR.


Re: DMR Master?

Steve N4IRS
 

OK,
send iax.conf and extensions.conf

On 6/11/2021 3:21 PM, Bryan Johnson wrote:
Good thing for Filezilla!


Re: DMR Master?

Bryan Johnson
 

Good thing for Filezilla!


Re: DMR Master?

Steve N4IRS
 

Send the file

On 6/11/2021 3:11 PM, Bryan Johnson wrote:
Should I send the whole rpt.conf file, or try to copy/paste the contents? It is around 1000 lines, so I am not sure of the easiest/fastest way to do it in one shot.


Re: DMR Master?

Bryan Johnson
 

Should I send the whole rpt.conf file, or try to copy/paste the contents? It is around 1000 lines, so I am not sure of the easiest/fastest way to do it in one shot.

321 - 340 of 9801