Date   

Re: a version of dvswitch you can control with your browser?

Patrick Perdue
 

That would be Analog_Reflector.

You can install it along-side DVSwitch server.

On 8/7/2021 1:44 PM, Justin Mann via groups.io wrote:
Folks,
I was working with a fellow ham last night, and he showed me a version of DV switch that I could totally control from my browser from across the country. I was using an iPhone I went to the web address of the dvswitch, and I could control everything using Safari. What itteration of dvswitch is this? Can I install it on a Linode thatI have where my xlx reflector resides?
Thanks,
Justin-ai5os.





a version of dvswitch you can control with your browser?

Justin Mann
 

Folks,
I was working with a fellow ham last night, and he showed me a version of DV switch that I could totally control from my browser from across the country. I was using an iPhone I went to the web address of the dvswitch, and I could control everything using Safari. What itteration of dvswitch is this? Can I install it on a Linode thatI have where my xlx reflector resides?
Thanks,
Justin-ai5os.


Re: One Way Audio On DMR Bridge

Steve N4IRS
 

Marshall,
Please post the following sections of /opt/MMDVM_Bridge/MMDVM_Bridge.ini:

[General]

[Info]

[DMR Network]

Edit out your password in DMR Network

Steve


On 8/4/2021 1:52 PM, Marshall Oldham wrote:

I am getting this over and over again in the this log file. Not sure why.

 

dvswitch@dvswitch-server:/var/log/mmdvm $ less MMDVM_Bridge-2021-08-04.log

 

 

E: 2021-08-04 01:42:03.997 DMR, Login to the master has failed, retrying network ...

M: 2021-08-04 01:42:03.997 DMR, Closing DMR Network



Re: One Way Audio On DMR Bridge

Marshall Oldham
 

I am getting this over and over again in the this log file. Not sure why.

 

dvswitch@dvswitch-server:/var/log/mmdvm $ less MMDVM_Bridge-2021-08-04.log

 

 

E: 2021-08-04 01:42:03.997 DMR, Login to the master has failed, retrying network ...

M: 2021-08-04 01:42:03.997 DMR, Closing DMR Network


Re: One Way Audio On DMR Bridge

Steve N4IRS
 

var/log/MMDVM and /var/log/dvswitch directories.

On 8/4/2021 12:08 PM, Marshall Oldham wrote:
Greetings, 

I have a DMR to Analog bridge setup on a Pi  running the DVSwitch server that has been working for the last few months. 

After a reboot it appears that I only have one-way audio from Analog to DMR, but no audio from DMR to Analog. 

I have not changed any of the settings in DVSwitch server software or my networking.

How do I troubleshoot this problem and figure it out? 

Thanks 

Marshall - ke6pcv 


Re: One Way Audio On DMR Bridge

Steve N4IRS
 

Look at Analog_Bridge and MMDVM_Bridge logs while sending from DMR to analog. (/Car//

Sent via smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Marshall Oldham <ke6pcv@...>
Sent: Wednesday, August 4, 2021 12:08:00 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: [DVSwitch] One Way Audio On DMR Bridge
 
Greetings, 

I have a DMR to Analog bridge setup on a Pi  running the DVSwitch server that has been working for the last few months. 

After a reboot it appears that I only have one-way audio from Analog to DMR, but no audio from DMR to Analog. 

I have not changed any of the settings in DVSwitch server software or my networking.

How do I troubleshoot this problem and figure it out? 

Thanks 

Marshall - ke6pcv 


One Way Audio On DMR Bridge

Marshall Oldham
 

Greetings, 

I have a DMR to Analog bridge setup on a Pi  running the DVSwitch server that has been working for the last few months. 

After a reboot it appears that I only have one-way audio from Analog to DMR, but no audio from DMR to Analog. 

I have not changed any of the settings in DVSwitch server software or my networking.

How do I troubleshoot this problem and figure it out? 

Thanks 

Marshall - ke6pcv 


Re: Is DNS Supported In The Latest MMDVM Bridge?

Steve N4IRS
 

Then replace the binary and check log for errors.

On 7/29/2021 1:47 PM, David - AK2L wrote:
I never used apt.  The files were manually placed into /opt/MMDVM_Bridge, the service directory and so on.


Re: Is DNS Supported In The Latest MMDVM Bridge?

David - AK2L
 

I never used apt.  The files were manually placed into /opt/MMDVM_Bridge, the service directory and so on.


Re: Is DNS Supported In The Latest MMDVM Bridge?

Steve N4IRS
 

The question is, how it was installed. Please show the output of apt-get update.

On 7/29/2021 1:26 PM, David - AK2L wrote:
Great!

How can I manually update the files without stepping on everything already in /opt/MMDVM_Bridge?


Re: Is DNS Supported In The Latest MMDVM Bridge?

David - AK2L
 

Great!

How can I manually update the files without stepping on everything already in /opt/MMDVM_Bridge?


Re: Is DNS Supported In The Latest MMDVM Bridge?

Steve N4IRS
 

Yes

On 7/29/2021 12:45 PM, David - AK2L wrote:
I have a 2-year old installation of MMDVM_Bridge / DVSwitch that I am using for a YSF reflector -to- YSF reflector connection.

Due to some network changes, the IP address of one of the reflectors has changed a couple times recently.

Does that latest version of MMDVM_Bridge support DNS so that I can avoid having to edit INI files?


Is DNS Supported In The Latest MMDVM Bridge?

David - AK2L
 

I have a 2-year old installation of MMDVM_Bridge / DVSwitch that I am using for a YSF reflector -to- YSF reflector connection.

Due to some network changes, the IP address of one of the reflectors has changed a couple times recently.

Does that latest version of MMDVM_Bridge support DNS so that I can avoid having to edit INI files?


Re: Upgrade Path Advice #best_practices #dmrlink

 

Yeah I was about to say I'm sure I built my P25Reflector from source.

On 28/7/21 4:13 am, Steve N4IRS wrote:
The only P25Reflector in the buster repo is armhf. If not ARM, then build from g4klx source.

On 7/27/2021 1:33 PM, Bill Atkinson wrote:
No joy with the existing sources list:

root@p25-ref-new: ~ # apt -y install p25reflector                                                                                                            [13:17:10]
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package p25reflector

apt-cache search does not show a P25Reflector package.

In searching github, I see a repository for P25Reflector in the DVSwitch family that was updated 5 months ago, but the only file in the bin dir seems to be arm-based.  Should I just pull G4KLX's code?


-- 
73 de Tony VK3JED/VK3IRL
http://vkradio.com


Re: Upgrade Path Advice #best_practices #dmrlink

Steve N4IRS
 

The only P25Reflector in the buster repo is armhf. If not ARM, then build from g4klx source.

On 7/27/2021 1:33 PM, Bill Atkinson wrote:
No joy with the existing sources list:

root@p25-ref-new: ~ # apt -y install p25reflector                                                                                                            [13:17:10]
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package p25reflector

apt-cache search does not show a P25Reflector package.

In searching github, I see a repository for P25Reflector in the DVSwitch family that was updated 5 months ago, but the only file in the bin dir seems to be arm-based.  Should I just pull G4KLX's code?


Re: Upgrade Path Advice #best_practices #dmrlink

Steve N4IRS
 

Show the output of apt update

Sent via smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Bill Atkinson <bill@...>
Sent: Tuesday, July 27, 2021 1:33:25 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Upgrade Path Advice #best_practices #dmrlink
 
No joy with the existing sources list:

root@p25-ref-new: ~ # apt -y install p25reflector                                                                                                            [13:17:10]
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package p25reflector

apt-cache search does not show a P25Reflector package.

In searching github, I see a repository for P25Reflector in the DVSwitch family that was updated 5 months ago, but the only file in the bin dir seems to be arm-based.  Should I just pull G4KLX's code?


Re: Upgrade Path Advice #best_practices #dmrlink

Bill Atkinson
 

No joy with the existing sources list:

root@p25-ref-new: ~ # apt -y install p25reflector                                                                                                            [13:17:10]
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package p25reflector

apt-cache search does not show a P25Reflector package.

In searching github, I see a repository for P25Reflector in the DVSwitch family that was updated 5 months ago, but the only file in the bin dir seems to be arm-based.  Should I just pull G4KLX's code?


Re: Upgrade Path Advice #best_practices #dmrlink

Steve N4IRS
 

The statement of, "You now have the COMPLETE DVSwitch Server installed.," is correct. The P25 reflector is not part of DVSwitch Server.
apt install p25reflector

On 7/27/2021 8:28 AM, Bill Atkinson wrote:
I have an existing stretch VM running:
  • P25Gateway version 20180409
  • P25Reflector version 20161101
  • P25Parrot version unknown, no support for --version, --help, etc.
  • Quantar_Bridge version unknown, no support for --version, --help, etc.
  • Dashboard version 20180428-HACK

My goal is to get up to the latest code base for all involved models.  It appears that this install was done a few years ago using the old MMDVM-Install process.

Should I try and backup/update on this machine or start with a new VM and fresh install then migrate my configs?

I did try the latter and following the DVSwitch-System-Builder process outlined here: https://github.com/DVSwitch/DVSwitch-System-Builder

But despite the statement of, "You now have the COMPLETE DVSwitch Server installed.," I noticed that I did not have the P25Reflector installed.  So does that mean that I still need to piece things together to get an updated version of what I currently have?  If so, what's the best repository to pull from?

Thoughts and/or advice appreciated.


Upgrade Path Advice #best_practices #dmrlink

Bill Atkinson
 

I have an existing stretch VM running:
  • P25Gateway version 20180409
  • P25Reflector version 20161101
  • P25Parrot version unknown, no support for --version, --help, etc.
  • Quantar_Bridge version unknown, no support for --version, --help, etc.
  • Dashboard version 20180428-HACK

My goal is to get up to the latest code base for all involved models.  It appears that this install was done a few years ago using the old MMDVM-Install process.

Should I try and backup/update on this machine or start with a new VM and fresh install then migrate my configs?

I did try the latter and following the DVSwitch-System-Builder process outlined here: https://github.com/DVSwitch/DVSwitch-System-Builder

But despite the statement of, "You now have the COMPLETE DVSwitch Server installed.," I noticed that I did not have the P25Reflector installed.  So does that mean that I still need to piece things together to get an updated version of what I currently have?  If so, what's the best repository to pull from?

Thoughts and/or advice appreciated.


Re: PLS HELP - private dmr server

Kevin Halton
 

Send me a pm and we can get you going in no time and it’s an early Christmas present for you. 


On Jul 23, 2021, at 10:18 AM, vk2ajb <sarc122@...> wrote:

I am at the point where i am about to pay someone to teamviewer into my pc and set this up for me...
I have a private p25 server setup and running well on a remote server but not everyone has access to p25 equipment so i want to do the same with DMR without connecting to any other networks
with the view to potentially bridge my p25 and dmr servers in the future (gotta get dmr working first)

i have followed chris's videos and have looked at everything on here and i am still none the wiser
somebody please help this NOOB
Thankyou in advance

281 - 300 of 9882