Welcome to DVSwitch
DVSwitch is a set of tools and programs related to provisioning and operating Amateur Radio digital voice networks.
Purpose
The purpose of DVSwitch is as follows:
1) Allows “local” networking during an outage of the regional national/international network server.
2) Allows a local network operator to “blend” upstream feeds from different Networks (capital N on purpose). These Networks can’t get their act together and learn how to play nice with each other (everyone guilty as far as we are concerned). They may not like people doing this, but the solution is to grow up and work with each other, and not keep trying to force people to take sides.
3) Allows local segregation of localized traffic with more flexibility.
4) Allows experimentation with linking and how it’s done (part 97 specifies experimentation and advancement of the radio art are a core part of amateur radio).
1) Allows “local” networking during an outage of the regional national/international network server.
2) Allows a local network operator to “blend” upstream feeds from different Networks (capital N on purpose). These Networks can’t get their act together and learn how to play nice with each other (everyone guilty as far as we are concerned). They may not like people doing this, but the solution is to grow up and work with each other, and not keep trying to force people to take sides.
3) Allows local segregation of localized traffic with more flexibility.
4) Allows experimentation with linking and how it’s done (part 97 specifies experimentation and advancement of the radio art are a core part of amateur radio).
Mission Statement/Position
Our stated position is:
WHEREAS the Networks continue to be largely islands and are not working together to create a unified network of Networks.
WHEREAS no firm reason has been given by any of the Networks why a *competent* local network operator cannot make this work effectively.
(US ONLY)
WHEREAS 47 CFR 97 (Amateur Radio Service) specifies that a core component of amateur radio is experimentation and advancement of the radio art [97.1(b)].
BE IT RESOLVED the core group of US amateur radio operators and experimenters organized around the DVSwitch project, and in the spirit of USA 47 CFR 97 and its intentions, support the *responsible* and *thoughtful* use of digital voice networking tools to create localized networks that will interconnect to the national/international Networks, and will support users of its tools in order to do this in the most effective and sustainable way possible.
WHEREAS the Networks continue to be largely islands and are not working together to create a unified network of Networks.
WHEREAS no firm reason has been given by any of the Networks why a *competent* local network operator cannot make this work effectively.
(US ONLY)
WHEREAS 47 CFR 97 (Amateur Radio Service) specifies that a core component of amateur radio is experimentation and advancement of the radio art [97.1(b)].
BE IT RESOLVED the core group of US amateur radio operators and experimenters organized around the DVSwitch project, and in the spirit of USA 47 CFR 97 and its intentions, support the *responsible* and *thoughtful* use of digital voice networking tools to create localized networks that will interconnect to the national/international Networks, and will support users of its tools in order to do this in the most effective and sustainable way possible.
|
I'm stumped....
Roger Davies
I'm using DVS Mobile. I can hear all traffic from TGs, but no one can hear me. I can go to Hoseline and hear myself. I checked to see if I could hear myself using hotspot, but no luck their either. DVS dashboard shows me keying up. I tried the TGIF network and all works perfect, I can hear and be heard. It's like I can get to the BM server, when I key up, but that's about it. Signal doesn't come out on any TG. I did a DVS server upgrade and no help there either. Checked BM Hotspot password and that's good. Any ideas? TIA. Roger N6DVZ
|
|
|
|
New Setup disconnects
Hi,
I have a ClearNode that I am attempting to connect to with DVSwitch Mobile I followed all the setup and config directions and the mobile app successfully registers. My AllStar node number automatically populates and I tap the Connect button. It appears to connect and then reads back (an announcement) “Node 1998” and then it disconnects (the hangup button greys out and the connect button becomes available again) but it stays registered. I feel like I’m super close to figuring this out and getting it to work - can anyone point me in the right direction? Thanks, Pete KD2TCQ
|
|
|
|
Re: All-star to dmr bridge
#analog_bridge
Roger. Please post the MMDVM_Bridge log when you are transmitting
from analog to DMR. Also, include your MMDVM_Bridge.ini Remember to
clear out the password.
toggle quoted messageShow quoted text
Steve N4IRS
On 8/19/21 8:44 PM, Roger via groups.io
wrote:
I am having an issue with the analog to dmr bridge. I did read a couple posts here and their solutions did not fix my issue. I can get dmr traffic to the analog side but it will not go from analog to dmr. The analog bridge software sees that there's traffic and says PTT On from the analog side but it doesn't seem to pass it to the mmdvm bridge. I've looked over the tutorial I followed several times and looked through logs that really don't give me errors... I've ran the programs in the foreground and from there everything appears normal as far as I can tell. Maybe it's something simple I'm overlooking but at this point I am at a loss. Any help would be greatly appreciated.
|
|
|
|
All-star to dmr bridge
#analog_bridge
I am having an issue with the analog to dmr bridge. I did read a couple posts here and their solutions did not fix my issue. I can get dmr traffic to the analog side but it will not go from analog to dmr. The analog bridge software sees that there's traffic and says PTT On from the analog side but it doesn't seem to pass it to the mmdvm bridge. I've looked over the tutorial I followed several times and looked through logs that really don't give me errors... I've ran the programs in the foreground and from there everything appears normal as far as I can tell. Maybe it's something simple I'm overlooking but at this point I am at a loss. Any help would be greatly appreciated.
|
|
|
|
Re: #mmdvm_bridge (code=killed, signal=SEGV) ERROR
#mmdvm_bridge
Thanks again Steve! 73 KB7RQQ
On 8/19/2021 12:08 PM, Steve N4IRS
wrote:
To close this thread.
|
|
|
|
Re: #mmdvm_bridge (code=killed, signal=SEGV) ERROR
#mmdvm_bridge
To close this thread.
toggle quoted messageShow quoted text
The DMRID file was a red herring. The actual problem was that the YSF mode was enabled but not YSF networking. That SHOULD not cause a segfault, but it does. It is on the list to be fixed. Steve N4IRS
On 8/19/2021 2:39 PM, Todd, KB7RQQ
wrote:
|
|
|
|
Re: #mmdvm_bridge (code=killed, signal=SEGV) ERROR
#mmdvm_bridge
toggle quoted messageShow quoted text
On 8/19/2021 2:39 PM, Todd, KB7RQQ
wrote:
|
|
|
|
Re: #mmdvm_bridge (code=killed, signal=SEGV) ERROR
#mmdvm_bridge
root@dmr-bridge:/opt/MMDVM_Bridge# ./MMDVM_Bridge MMDVM_Bridge.ini
I: 2021-08-19 18:38:49.622 MMDVM_Bridge:
I: 2021-08-19 18:38:49.623 Portions Copyright (C) 2018, 2019, 2020, 2021 DVSwitch, INAD.
I: 2021-08-19 18:38:49.623 Hacks by Mike N4IRR and Steve N4IRS
I: 2021-08-19 18:38:49.623 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2021-08-19 18:38:49.623 This software is for use on amateur radio networks only,
I: 2021-08-19 18:38:49.623 it is to be used for educational purposes only. Its use on
I: 2021-08-19 18:38:49.623 commercial networks is strictly prohibited.
I: 2021-08-19 18:38:49.623 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2021-08-19 18:38:49.623 MMDVM_Bridge-20210520_V1.6.8 is starting
M: 2021-08-19 18:38:49.623 Built 07:33:44 May 28 2021 (GitID #3cfcf23)
I: 2021-08-19 18:38:49.623 General Parameters
I: 2021-08-19 18:38:49.623 Callsign: KB7RQQ
I: 2021-08-19 18:38:49.623 Id: 315337611
I: 2021-08-19 18:38:49.624 Duplex: no
I: 2021-08-19 18:38:49.625 Timeout: 180s
I: 2021-08-19 18:38:49.625 D-Star: enabled
I: 2021-08-19 18:38:49.625 DMR: enabled
I: 2021-08-19 18:38:49.625 YSF: enabled
I: 2021-08-19 18:38:49.625 P25: disabled
I: 2021-08-19 18:38:49.625 NXDN: disabled
I: 2021-08-19 18:38:49.625 Modem Parameters
I: 2021-08-19 18:38:49.626 Port: /dev/null
I: 2021-08-19 18:38:49.626 RX Invert: no
I: 2021-08-19 18:38:49.626 TX Invert: no
I: 2021-08-19 18:38:49.626 PTT Invert: no
I: 2021-08-19 18:38:49.626 TX Delay: 100ms
I: 2021-08-19 18:38:49.626 RX Offset: 0Hz
I: 2021-08-19 18:38:49.626 TX Offset: 0Hz
I: 2021-08-19 18:38:49.626 RX DC Offset: 0
I: 2021-08-19 18:38:49.626 TX DC Offset: 0
I: 2021-08-19 18:38:49.626 RF Level: 100.0%
I: 2021-08-19 18:38:49.626 DMR Delay: 0 (0.0ms)
I: 2021-08-19 18:38:49.626 RX Level: 50.0%
I: 2021-08-19 18:38:49.627 CW Id TX Level: 50.0%
I: 2021-08-19 18:38:49.627 D-Star TX Level: 50.0%
I: 2021-08-19 18:38:49.627 DMR TX Level: 50.0%
I: 2021-08-19 18:38:49.627 YSF TX Level: 50.0%
I: 2021-08-19 18:38:49.627 P25 TX Level: 50.0%
I: 2021-08-19 18:38:49.627 NXDN TX Level: 50.0%
I: 2021-08-19 18:38:49.627 RX Frequency: 222340000Hz (222340000Hz)
I: 2021-08-19 18:38:49.627 TX Frequency: 224940000Hz (224940000Hz)
M: 2021-08-19 18:38:49.627 Opening the MMDVM
I: 2021-08-19 18:38:49.627 Display Parameters
I: 2021-08-19 18:38:49.627 Type:
I: 2021-08-19 18:38:49.628 DMR Network Parameters
I: 2021-08-19 18:38:49.628 Address: 2421.master.brandmeister.network
I: 2021-08-19 18:38:49.628 Port: 62031
I: 2021-08-19 18:38:49.628 Local: 62032
I: 2021-08-19 18:38:49.628 Jitter: 360ms
I: 2021-08-19 18:38:49.628 Slot 1: disabled
I: 2021-08-19 18:38:49.628 Slot 2: enabled
I: 2021-08-19 18:38:49.628 Mode Hang: 3s
I: 2021-08-19 18:38:49.629 Info Parameters
I: 2021-08-19 18:38:49.629 Callsign: KB7RQQ
I: 2021-08-19 18:38:49.629 RX Frequency: 222340000Hz
I: 2021-08-19 18:38:49.629 TX Frequency: 222340000Hz
I: 2021-08-19 18:38:49.629 Power: 1W
I: 2021-08-19 18:38:49.630 Latitude: 41.733299deg N
I: 2021-08-19 18:38:49.630 Longitude: -50.399899deg E
I: 2021-08-19 18:38:49.630 Height: 0m
I: 2021-08-19 18:38:49.630 Location: "Iceberg, North Atlantic"
I: 2021-08-19 18:38:49.630 Description: "MMDVM_Bridge"
I: 2021-08-19 18:38:49.630 URL: "https://groups.io/g/DVSwitch"
M: 2021-08-19 18:38:49.630 DMR, Opening DMR Network
I: 2021-08-19 18:38:49.630 RSSI
I: 2021-08-19 18:38:49.630 Mapping File: /dev/null
I: 2021-08-19 18:38:49.630 Loaded 0 RSSI data mapping points from /dev/null
I: 2021-08-19 18:38:49.630 DMR Id Lookups
I: 2021-08-19 18:38:49.631 File: ./DMRIds.dat
I: 2021-08-19 18:38:49.631 Reload: 24 hours
W: 2021-08-19 18:38:49.631 Cannot open the DMR Id lookup file - ./DMRIds.dat
I: 2021-08-19 18:38:49.631 D-Star RF Parameters
I: 2021-08-19 18:38:49.631 Module: B
I: 2021-08-19 18:38:49.631 Self Only: no
I: 2021-08-19 18:38:49.631 Ack Reply: yes
I: 2021-08-19 18:38:49.631 Ack Time: 750ms
I: 2021-08-19 18:38:49.631 Error Reply: yes
I: 2021-08-19 18:38:49.632 Remote Gateway: no
I: 2021-08-19 18:38:49.632 Mode Hang: 10s
M: 2021-08-19 18:38:49.632 D-Star, Opening INI file: DVSwitch.ini
M: 2021-08-19 18:38:49.632 D-Star, Setting [DSTAR] address -> 127.0.0.1
M: 2021-08-19 18:38:49.632 D-Star, Setting [DSTAR] txPort -> 32100
M: 2021-08-19 18:38:49.632 D-Star, Setting [DSTAR] rxPort -> 32103
M: 2021-08-19 18:38:49.632 D-Star, Setting [DSTAR] fallbackID -> 1234567
M: 2021-08-19 18:38:49.632 D-Star, Setting [DSTAR] exportTG -> 9
M: 2021-08-19 18:38:49.632 D-Star, Setting [DSTAR] slot -> 2
M: 2021-08-19 18:38:49.632 D-Star, Setting [DSTAR] RemotePort -> 54321
M: 2021-08-19 18:38:49.632 D-Star, Setting [DSTAR] message -> %location %description
M: 2021-08-19 18:38:49.632 D-Star, Transmitting on 127.0.0.1:32100, and listening on port 32103. Result = 1
I: 2021-08-19 18:38:49.632 DMR RF Parameters
I: 2021-08-19 18:38:49.632 Id: 315337611
I: 2021-08-19 18:38:49.632 Color Code: 1
I: 2021-08-19 18:38:49.632 Self Only: no
I: 2021-08-19 18:38:49.632 Embedded LC Only: yes
I: 2021-08-19 18:38:49.632 Dump Talker Alias Data: no
I: 2021-08-19 18:38:49.632 Prefixes: 0
I: 2021-08-19 18:38:49.632 Call Hang: 3s
I: 2021-08-19 18:38:49.632 TX Hang: 3s
I: 2021-08-19 18:38:49.632 Mode Hang: 10s
M: 2021-08-19 18:38:49.632 DMR, Opening INI file: DVSwitch.ini
M: 2021-08-19 18:38:49.633 DMR, Setting [DMR] address -> 127.0.0.1
M: 2021-08-19 18:38:49.633 DMR, Setting [DMR] txPort -> 31100
M: 2021-08-19 18:38:49.633 DMR, Setting [DMR] rxPort -> 31103
M: 2021-08-19 18:38:49.633 DMR, Setting [DMR] slot -> 2
M: 2021-08-19 18:38:49.633 DMR, Setting [DMR] exportTG -> 0
M: 2021-08-19 18:38:49.633 DMR, Setting [DMR] hangTimerInFrames -> 0
M: 2021-08-19 18:38:49.633 DMR, Setting [DMR] talkerAlias -> %callsign %location %description
M: 2021-08-19 18:38:49.633 DMR, Transmitting on 127.0.0.1:31100, and listening on port 31103. Result = 1
I: 2021-08-19 18:38:49.633 YSF RF Parameters
I: 2021-08-19 18:38:49.633 Low Deviation: no
I: 2021-08-19 18:38:49.633 Remote Gateway: no
I: 2021-08-19 18:38:49.633 Self Only: no
I: 2021-08-19 18:38:49.633 DSQ: no
I: 2021-08-19 18:38:49.633 Mode Hang: 10s
I: 2021-08-19 18:38:49.643 Started the DMR Id lookup reload thread
Segmentation fault
|
|
|
|
Re: #mmdvm_bridge (code=killed, signal=SEGV) ERROR
#mmdvm_bridge
Show me the output of ./MMDVM_Bridge MMDVM_Bridge.ini
toggle quoted messageShow quoted text
On 8/19/2021 2:33 PM, Todd, KB7RQQ
wrote:
OK. Made the change to [DMR Id Lookup] verified 'save'. I keep getting the same error.. Should I reboot or restart mmdvm_bridge?
|
|
|
|
Re: #mmdvm_bridge (code=killed, signal=SEGV) ERROR
#mmdvm_bridge
OK. Made the change to [DMR Id Lookup] verified 'save'. I keep getting the same error.. Should I reboot or restart mmdvm_bridge?
|
|
|
|
Re: #mmdvm_bridge (code=killed, signal=SEGV) ERROR
#mmdvm_bridge
I don't understand how the file keeps reappearing I try the same
thing on the test server and it stays gone.
toggle quoted messageShow quoted text
That being said, edit /opt/MMDVM_Bridge/MMDVM_Bridge.ini Change this: [DMR Id Lookup] File=/var/lib/mmdvm/DMRIds.dat Time=24 to this: [DMR Id Lookup] File=./DMRIds.dat Time=24 save and retest
On 8/19/2021 2:09 PM, Todd, KB7RQQ
wrote:
trying it here.
|
|
|
|
Re: #mmdvm_bridge (code=killed, signal=SEGV) ERROR
#mmdvm_bridge
trying it here.
root@dmr-bridge:/opt/MMDVM_Bridge# ./MMDVM_Bridge MMDVM_Bridge.ini I: 2021-08-19 17:48:53.092 MMDVM_Bridge: I: 2021-08-19 17:48:53.092 Portions Copyright (C) 2018, 2019, 2020, 2021 DVSwitch, INAD. I: 2021-08-19 17:48:53.092 Hacks by Mike N4IRR and Steve N4IRS I: 2021-08-19 17:48:53.093 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- I: 2021-08-19 17:48:53.093 This software is for use on amateur radio networks only, I: 2021-08-19 17:48:53.093 it is to be used for educational purposes only. Its use on I: 2021-08-19 17:48:53.093 commercial networks is strictly prohibited. I: 2021-08-19 17:48:53.093 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others M: 2021-08-19 17:48:53.093 MMDVM_Bridge-20210520_V1.6.8 is starting M: 2021-08-19 17:48:53.093 Built 07:33:44 May 28 2021 (GitID #3cfcf23) I: 2021-08-19 17:48:53.093 General Parameters I: 2021-08-19 17:48:53.093 Callsign: KB7RQQ I: 2021-08-19 17:48:53.093 Id: 315337611 I: 2021-08-19 17:48:53.093 Duplex: no I: 2021-08-19 17:48:53.093 Timeout: 180s I: 2021-08-19 17:48:53.093 D-Star: enabled I: 2021-08-19 17:48:53.093 DMR: enabled I: 2021-08-19 17:48:53.093 YSF: enabled I: 2021-08-19 17:48:53.093 P25: disabled I: 2021-08-19 17:48:53.094 NXDN: disabled I: 2021-08-19 17:48:53.094 Modem Parameters I: 2021-08-19 17:48:53.094 Port: /dev/null I: 2021-08-19 17:48:53.094 RX Invert: no I: 2021-08-19 17:48:53.094 TX Invert: no I: 2021-08-19 17:48:53.094 PTT Invert: no I: 2021-08-19 17:48:53.094 TX Delay: 100ms I: 2021-08-19 17:48:53.094 RX Offset: 0Hz I: 2021-08-19 17:48:53.094 TX Offset: 0Hz I: 2021-08-19 17:48:53.094 RX DC Offset: 0 I: 2021-08-19 17:48:53.094 TX DC Offset: 0 I: 2021-08-19 17:48:53.094 RF Level: 100.0% I: 2021-08-19 17:48:53.094 DMR Delay: 0 (0.0ms) I: 2021-08-19 17:48:53.094 RX Level: 50.0% I: 2021-08-19 17:48:53.094 CW Id TX Level: 50.0% I: 2021-08-19 17:48:53.094 D-Star TX Level: 50.0% I: 2021-08-19 17:48:53.094 DMR TX Level: 50.0% I: 2021-08-19 17:48:53.094 YSF TX Level: 50.0% I: 2021-08-19 17:48:53.095 P25 TX Level: 50.0% I: 2021-08-19 17:48:53.095 NXDN TX Level: 50.0% I: 2021-08-19 17:48:53.095 RX Frequency: 222340000Hz (222340000Hz) I: 2021-08-19 17:48:53.095 TX Frequency: 224940000Hz (224940000Hz) M: 2021-08-19 17:48:53.095 Opening the MMDVM I: 2021-08-19 17:48:53.095 Display Parameters I: 2021-08-19 17:48:53.095 Type: I: 2021-08-19 17:48:53.095 DMR Network Parameters I: 2021-08-19 17:48:53.095 Address: 2421.master.brandmeister.network I: 2021-08-19 17:48:53.095 Port: 62031 I: 2021-08-19 17:48:53.095 Local: 62032 I: 2021-08-19 17:48:53.095 Jitter: 360ms I: 2021-08-19 17:48:53.095 Slot 1: disabled I: 2021-08-19 17:48:53.095 Slot 2: enabled I: 2021-08-19 17:48:53.095 Mode Hang: 3s I: 2021-08-19 17:48:53.097 Info Parameters I: 2021-08-19 17:48:53.097 Callsign: KB7RQQ I: 2021-08-19 17:48:53.097 RX Frequency: 222340000Hz I: 2021-08-19 17:48:53.097 TX Frequency: 222340000Hz I: 2021-08-19 17:48:53.097 Power: 1W I: 2021-08-19 17:48:53.097 Latitude: 41.733299deg N I: 2021-08-19 17:48:53.097 Longitude: -50.399899deg E I: 2021-08-19 17:48:53.097 Height: 0m I: 2021-08-19 17:48:53.097 Location: "Iceberg, North Atlantic" I: 2021-08-19 17:48:53.097 Description: "MMDVM_Bridge" I: 2021-08-19 17:48:53.097 URL: "https://groups.io/g/DVSwitch" M: 2021-08-19 17:48:53.097 DMR, Opening DMR Network I: 2021-08-19 17:48:53.097 RSSI I: 2021-08-19 17:48:53.098 Mapping File: /dev/null I: 2021-08-19 17:48:53.098 Loaded 0 RSSI data mapping points from /dev/null I: 2021-08-19 17:48:53.098 DMR Id Lookups I: 2021-08-19 17:48:53.098 File: /var/lib/mmdvm/DMRIds.dat I: 2021-08-19 17:48:53.098 Reload: 24 hours I: 2021-08-19 17:48:53.255 Loaded 202554 Ids to the DMR callsign lookup table I: 2021-08-19 17:48:53.255 D-Star RF Parameters I: 2021-08-19 17:48:53.255 Module: B I: 2021-08-19 17:48:53.255 Self Only: no I: 2021-08-19 17:48:53.256 Ack Reply: yes I: 2021-08-19 17:48:53.256 Ack Time: 750ms I: 2021-08-19 17:48:53.256 Error Reply: yes I: 2021-08-19 17:48:53.256 Remote Gateway: no I: 2021-08-19 17:48:53.256 Mode Hang: 10s M: 2021-08-19 17:48:53.256 D-Star, Opening INI file: DVSwitch.ini M: 2021-08-19 17:48:53.256 D-Star, Setting [DSTAR] address -> 127.0.0.1 M: 2021-08-19 17:48:53.256 D-Star, Setting [DSTAR] txPort -> 32100 M: 2021-08-19 17:48:53.256 D-Star, Setting [DSTAR] rxPort -> 32103 M: 2021-08-19 17:48:53.256 D-Star, Setting [DSTAR] fallbackID -> 1234567 M: 2021-08-19 17:48:53.256 D-Star, Setting [DSTAR] exportTG -> 9 M: 2021-08-19 17:48:53.256 D-Star, Setting [DSTAR] slot -> 2 M: 2021-08-19 17:48:53.256 D-Star, Setting [DSTAR] RemotePort -> 54321 M: 2021-08-19 17:48:53.256 D-Star, Setting [DSTAR] message -> %location %description M: 2021-08-19 17:48:53.257 D-Star, Transmitting on 127.0.0.1:32100, and listening on port 32103. Result = 1 I: 2021-08-19 17:48:53.257 DMR RF Parameters I: 2021-08-19 17:48:53.257 Id: 315337611 I: 2021-08-19 17:48:53.257 Color Code: 1 I: 2021-08-19 17:48:53.257 Self Only: no I: 2021-08-19 17:48:53.257 Embedded LC Only: yes I: 2021-08-19 17:48:53.257 Dump Talker Alias Data: no I: 2021-08-19 17:48:53.257 Prefixes: 0 I: 2021-08-19 17:48:53.257 Call Hang: 3s I: 2021-08-19 17:48:53.257 TX Hang: 3s I: 2021-08-19 17:48:53.257 Mode Hang: 10s M: 2021-08-19 17:48:53.257 DMR, Opening INI file: DVSwitch.ini M: 2021-08-19 17:48:53.257 DMR, Setting [DMR] address -> 127.0.0.1 M: 2021-08-19 17:48:53.258 DMR, Setting [DMR] txPort -> 31100 M: 2021-08-19 17:48:53.258 DMR, Setting [DMR] rxPort -> 31103 M: 2021-08-19 17:48:53.258 DMR, Setting [DMR] slot -> 2 M: 2021-08-19 17:48:53.258 DMR, Setting [DMR] exportTG -> 0 M: 2021-08-19 17:48:53.258 DMR, Setting [DMR] hangTimerInFrames -> 0 M: 2021-08-19 17:48:53.258 DMR, Setting [DMR] talkerAlias -> %callsign %location %description M: 2021-08-19 17:48:53.258 DMR, Transmitting on 127.0.0.1:31100, and listening on port 31103. Result = 1 I: 2021-08-19 17:48:53.258 YSF RF Parameters I: 2021-08-19 17:48:53.258 Low Deviation: no I: 2021-08-19 17:48:53.258 Remote Gateway: no I: 2021-08-19 17:48:53.258 Self Only: no I: 2021-08-19 17:48:53.258 DSQ: no I: 2021-08-19 17:48:53.258 Mode Hang: 10s I: 2021-08-19 17:48:53.270 Started the DMR Id lookup reload thread Segmentation fault
|
|
|
|
Re: #mmdvm_bridge (code=killed, signal=SEGV) ERROR
#mmdvm_bridge
That is weird... I'm cutting from putty and pasting into my email (Thunderbird) and it is all there when I hit send.. I've never had that happen..
Maybe a cut from notepad? root@dmr-bridge:/opt/MMDVM_Bridge# ./MMDVM_Bridge MMDVM_Bridge.ini I: 2021-08-19 17:48:53.092 MMDVM_Bridge: I: 2021-08-19 17:48:53.092 Portions Copyright (C) 2018, 2019, 2020, 2021 DVSwitch, INAD. I: 2021-08-19 17:48:53.092 Hacks by Mike N4IRR and Steve N4IRS I: 2021-08-19 17:48:53.093 =
|
|
|
|
Re: #mmdvm_bridge (code=killed, signal=SEGV) ERROR
#mmdvm_bridge
That is weird... I'm cutting from putty and pasting into my email (Thunderbird) and it is all there when I hit send.. I've never had that happen..
Maybe a cut from notepad? root@dmr-bridge:/opt/MMDVM_Bridge# ./MMDVM_Bridge MMDVM_Bridge.ini I: 2021-08-19 17:48:53.092 MMDVM_Bridge: I: 2021-08-19 17:48:53.092 Portions Copyright (C) 2018, 2019, 2020, 2021 DVSwitch, INAD. I: 2021-08-19 17:48:53.092 Hacks by Mike N4IRR and Steve N4IRS I: 2021-08-19 17:48:53.093 =
|
|
|
|
Re: #mmdvm_bridge (code=killed, signal=SEGV) ERROR
#mmdvm_bridge
No funny... I'm seeing it ALL in my email but it is showing up short on the send... trying again
root@dmr-bridge:/var/lib/mmdvm# ./MMDVM_Bridge MMDVM_Bridge.ini -bash: ./MMDVM_Bridge: No such file or directory root@dmr-bridge:/var/lib/mmdvm# cd /opt root@dmr-bridge:/opt# ls Analog_Bridge MMDVM_Bridge NXDNGateway NXDNParrot P25Gateway P25Parrot Quantar_Bridge Web_Proxy YSFGateway YSFParrot md380-emu vultr root@dmr-bridge:/opt# cd MMDVM-Bridge -bash: cd: MMDVM-Bridge: No such file or directory root@dmr-bridge:/opt# cd MMDVM_Bridge root@dmr-bridge:/opt/MMDVM_Bridge# ls DVSwitch.ini MMDVM_Bridge MMDVM_Bridge.ini RemoteCommand dvswitch.sh root@dmr-bridge:/opt/MMDVM_Bridge# ./MMDVM_Bridge MMDVM_Bridge.ini I: 2021-08-19 17:48:53.092 MMDVM_Bridge: I: 2021-08-19 17:48:53.092 Portions Copyright (C) 2018, 2019, 2020, 2021 DVSwitch, INAD. I: 2021-08-19 17:48:53.092 Hacks by Mike N4IRR and Steve N4IRS I: 2021-08-19 17:48:53.093 =
|
|
|
|
Re: #mmdvm_bridge (code=killed, signal=SEGV) ERROR
#mmdvm_bridge
That is the complete output?
toggle quoted messageShow quoted text
On 8/19/2021 1:51 PM, Todd, KB7RQQ wrote:
Ooops complete output
|
|
|
|
Re: #mmdvm_bridge (code=killed, signal=SEGV) ERROR
#mmdvm_bridge
Ooops complete output
root@dmr-bridge:/var/lib/mmdvm# ./MMDVM_Bridge MMDVM_Bridge.ini -bash: ./MMDVM_Bridge: No such file or directory root@dmr-bridge:/var/lib/mmdvm# cd /opt root@dmr-bridge:/opt# ls Analog_Bridge MMDVM_Bridge NXDNGateway NXDNParrot P25Gateway P25Parrot Quantar_Bridge Web_Proxy YSFGateway YSFParrot md380-emu vultr root@dmr-bridge:/opt# cd MMDVM-Bridge -bash: cd: MMDVM-Bridge: No such file or directory root@dmr-bridge:/opt# cd MMDVM_Bridge root@dmr-bridge:/opt/MMDVM_Bridge# ls DVSwitch.ini MMDVM_Bridge MMDVM_Bridge.ini RemoteCommand dvswitch.sh root@dmr-bridge:/opt/MMDVM_Bridge# ./MMDVM_Bridge MMDVM_Bridge.ini I: 2021-08-19 17:48:53.092 MMDVM_Bridge: I: 2021-08-19 17:48:53.092 Portions Copyright (C) 2018, 2019, 2020, 2021 DVSwitch, INAD. I: 2021-08-19 17:48:53.092 Hacks by Mike N4IRR and Steve N4IRS I: 2021-08-19 17:48:53.093 =
|
|
|
|
Re: #mmdvm_bridge (code=killed, signal=SEGV) ERROR
#mmdvm_bridge
I should have caught that.. brain fry
root@dmr-bridge:/var/lib/mmdvm# ls -la /var/lib/mmdvm/DMRIds.dat -rw-r--r-- 1 root root 4486840 Aug 19 08:50 /var/lib/mmdvm/DMRIds.dat Here is where I'm deleting it and verifying... root@dmr-bridge:/var/lib/mmdvm# ls APRS_Hosts.txt DExtra_Hosts.txt DMR_Hosts.txt FCSRooms.txt NXDNHosts.txt TGList_BM.txt YSFHosts.txt private_P25Hosts.txt DCS_Hosts.txt DMRIds.dat DPlus_Hosts.txt NXDN.csv P25Hosts.txt XLXHosts.txt private_NXDNHosts.txt root@dmr-bridge:/var/lib/mmdvm# rm DMRIds.dat root@dmr-bridge:/var/lib/mmdvm# ls APRS_Hosts.txt DExtra_Hosts.txt DPlus_Hosts.txt NXDN.csv P25Hosts.txt XLXHosts.txt private_NXDNHosts.txt DCS_Hosts.txt DMR_Hosts.txt FCSRooms.txt NXDNHosts.txt TGList_BM.txt YSFHosts.txt private_P25Hosts.txt root@dmr-bridge:/var/lib/mmdvm# And here is the output... root@dmr-bridge:/opt/MMDVM_Bridge# ./MMDVM_Bridge MMDVM_Bridge.ini I: 2021-08-19 17:48:53.092 MMDVM_Bridge: I: 2021-08-19 17:48:53.092 Portions Copyright (C) 2018, 2019, 2020, 2021 DVSwitch, INAD. I: 2021-08-19 17:48:53.092 Hacks by Mike N4IRR and Steve N4IRS I: 2021-08-19 17:48:53.093 =
|
|
|
|
Re: #mmdvm_bridge (code=killed, signal=SEGV) ERROR
#mmdvm_bridge
Sorry,
toggle quoted messageShow quoted text
ls -la /var/lib/mmdvm/DMRIds.dat Copy the output off your screen and past it like you have been doing.
On 8/19/2021 1:40 PM, Todd, KB7RQQ wrote:
-la /var/lib/mmdvm/DMRIds.dat
|
|
|
|
Re: #mmdvm_bridge (code=killed, signal=SEGV) ERROR
#mmdvm_bridge
DMRIds is back. system isn't recognizing the -la (bash error).
I'm not sure how to get that output.
On 8/19/2021 10:21 AM, Steve N4IRS
wrote:
OK,
|
|
|