|
Re: Allstar issue using DVSwitch
Thanks Steve will try that, I was using the predefined talk groups when long pressing B which are prefixed with a *2
Thanks Steve will try that, I was using the predefined talk groups when long pressing B which are prefixed with a *2
|
By
John EA5JAV/M0JCA
·
#10298
·
|
|
Re: Allstar issue using DVSwitch
Use *341522
Sent by smoke signal (AT&T)
Use *341522
Sent by smoke signal (AT&T)
|
By
Steve N4IRS
·
#10297
·
|
|
Allstar issue using DVSwitch
Hello, I have a problem with DVSwitch when using Allstar, everything is configured as am able to receive incoming transmissions when I connect to a node e.g. 41522 using command *241522 followed by
Hello, I have a problem with DVSwitch when using Allstar, everything is configured as am able to receive incoming transmissions when I connect to a node e.g. 41522 using command *241522 followed by
|
By
John EA5JAV/M0JCA
·
#10296
·
|
|
Screen Layout
How do I change the DVSwitch HTML Client screen layout? Menus are covering other menus and I would also like to add or change one of the buttons to TGIF. I would also like to change the profile
How do I change the DVSwitch HTML Client screen layout? Menus are covering other menus and I would also like to add or change one of the buttons to TGIF. I would also like to change the profile
|
By
Chris Viningre
·
#10295
·
|
|
Re: AMBE GPIO board for Pi B 3+ - Where to Buy One?
don't forget the ZUM AMBE board ... connects over ethernet or WIFI
don't forget the ZUM AMBE board ... connects over ethernet or WIFI
|
By
Rob KA2PBT <pabutusa@...>
·
#10294
·
|
|
Re: AMBE GPIO board for Pi B 3+ - Where to Buy One?
NWDigital used to make one, but they haven't for a while. If you only need one channel, get a ThumnDV or DVMega DVstick 30 USB dongle. There is also a three channel one, the DVstick 33.
NWDigital used to make one, but they haven't for a while. If you only need one channel, get a ThumnDV or DVMega DVstick 30 USB dongle. There is also a three channel one, the DVstick 33.
|
By
Patrick Perdue
·
#10293
·
|
|
Re: AMBE GPIO board for Pi B 3+ - Where to Buy One?
Could you point a link where you herd about such a device ?
Could you point a link where you herd about such a device ?
|
By
Mike KB8JNM
·
#10292
·
|
|
AMBE GPIO board for Pi B 3+ - Where to Buy One?
Does anyone know where I can buy one of these AMBE GPIO boards for Pi B 3+.
I would like to build an advanced DVSwitch server.
Thanks
Mike
ZL4IA
Does anyone know where I can buy one of these AMBE GPIO boards for Pi B 3+.
I would like to build an advanced DVSwitch server.
Thanks
Mike
ZL4IA
|
By
Mike Jensen (ZL4IA)
·
#10291
·
|
|
Re: Fusion kills the MMDVM Bridge
I made these changes (noted in bold) to the /opt/MMDVM_Bridge/DVSwitch.ini file and everything sprang to life. So far in testing it passes data and voice both directions and has stopped kicking out.
I made these changes (noted in bold) to the /opt/MMDVM_Bridge/DVSwitch.ini file and everything sprang to life. So far in testing it passes data and voice both directions and has stopped kicking out.
|
By
Greg AD4GC
·
#10290
·
|
|
Re: Fusion kills the MMDVM Bridge
Please stop using 31219 as well and use your dmrid as a talkgroup.
Corey n3fe
Please stop using 31219 as well and use your dmrid as a talkgroup.
Corey n3fe
|
By
Corey Dean N3FE
·
#10289
·
|
|
DVSwitch YSF DGID
Hi,
Is it possible with DVSwitch to use DGIDs on YSF because we find several systems that use this Group Mode feature on C4FM stations.
Can we do the same thing with DVSwitch Server and Mobile.--
Hi,
Is it possible with DVSwitch to use DGIDs on YSF because we find several systems that use this Group Mode feature on C4FM stations.
Can we do the same thing with DVSwitch Server and Mobile.--
|
By
Bruno
·
#10288
·
|
|
Re: Fusion kills the MMDVM Bridge
In Dvswitch.ini exportTG=9 under Dmr section should be 31219.
No need for ysfgateway.
Run MMDVM_Bridge in a window. Look in ini file and you will see various debug=0 change to debug=1 to see live
In Dvswitch.ini exportTG=9 under Dmr section should be 31219.
No need for ysfgateway.
Run MMDVM_Bridge in a window. Look in ini file and you will see various debug=0 change to debug=1 to see live
|
By
Ernie Gm7kbk
·
#10287
·
|
|
Re: Fusion kills the MMDVM Bridge
I finally found the script for a live log.....
This is two key-ups from YSF, it did not recognize the DMR right after the YSF key up, I had to wait until it "reset" to capture it.
pi@raspberrypi:~ $
I finally found the script for a live log.....
This is two key-ups from YSF, it did not recognize the DMR right after the YSF key up, I had to wait until it "reset" to capture it.
pi@raspberrypi:~ $
|
By
Greg AD4GC
·
#10286
·
|
|
Re: Fusion kills the MMDVM Bridge
YSFGateway-2022-01-11.log
M: 2022-01-11 03:40:30.892 Opening YSF network connection
I: 2022-01-11 03:40:30.892 Opening UDP port on 4200
M: 2022-01-11 03:40:30.892 Opening YSF network connection
I:
YSFGateway-2022-01-11.log
M: 2022-01-11 03:40:30.892 Opening YSF network connection
I: 2022-01-11 03:40:30.892 Opening UDP port on 4200
M: 2022-01-11 03:40:30.892 Opening YSF network connection
I:
|
By
Greg AD4GC
·
#10285
·
|
|
Re: Fusion kills the MMDVM Bridge
MMDVM_Bridge-2022-01-11.log
I: 2022-01-11 03:53:29.458 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2022-01-11 03:53:29.458 This software is for use on amateur radio networks only,
I: 2022-01-11
MMDVM_Bridge-2022-01-11.log
I: 2022-01-11 03:53:29.458 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2022-01-11 03:53:29.458 This software is for use on amateur radio networks only,
I: 2022-01-11
|
By
Greg AD4GC
·
#10284
·
|
|
Fusion kills the MMDVM Bridge
I am trying to build a simple DMR<-->YSF bridge. Both the bridge and reflector are on my network and as far as I know all the required ports have been forwarded and opened. I have followed the wiki to
I am trying to build a simple DMR<-->YSF bridge. Both the bridge and reflector are on my network and as far as I know all the required ports have been forwarded and opened. I have followed the wiki to
|
By
Greg AD4GC
·
#10283
·
|
|
moderated
Re: DV switch lost status
OK,
So, until that feature is implemented and documented, we will just answer, HamVoIP release V1.7.0-01 no longer works with the status tab in DVSwitch Mobile.
Steve N4IRS
OK,
So, until that feature is implemented and documented, we will just answer, HamVoIP release V1.7.0-01 no longer works with the status tab in DVSwitch Mobile.
Steve N4IRS
|
By
Steve N4IRS
·
#10282
·
|
|
Re: MMDVM Bridge and YSF Reflector don´t talk to each other
Uli,
I have been searching how to combine a YSF Reflector and MMDVM Bridge on the same Raspberry Pi. In my ignorance of how most of this works, I attempted to install the MMDVM Bridge on the Pi that I
Uli,
I have been searching how to combine a YSF Reflector and MMDVM Bridge on the same Raspberry Pi. In my ignorance of how most of this works, I attempted to install the MMDVM Bridge on the Pi that I
|
By
Greg AD4GC
·
#10281
·
|
|
moderated
Re: DV switch lost status
Steve & Everyone,
The linkslists were turned off for "phonemode" devices way back in
the rev 456 beta release, which was over a year ago. I'm surprised no
beta testers noticed this issue, since
Steve & Everyone,
The linkslists were turned off for "phonemode" devices way back in
the rev 456 beta release, which was over a year ago. I'm surprised no
beta testers noticed this issue, since
|
By
David McGough
·
#10280
·
|
|
moderated
Re: DV switch lost status
Thanks
By
W3YXZ Mike
·
#10279
·
|