|
Re: Usrp and dvswitch on windows
The usrp on windows can be used with the dvswitch server, you just need to put in the correct ip address and appropriate details needed. All this information is in the text config file.
But the
The usrp on windows can be used with the dvswitch server, you just need to put in the correct ip address and appropriate details needed. All this information is in the text config file.
But the
|
By
Billy
·
#10799
·
|
|
Re: HBmontorHelp
Thank for trying to help out ..
I am just start all over
KC2CWT
Bob Schneider
(914)497-5502
Carmel NY 10512
Thank for trying to help out ..
I am just start all over
KC2CWT
Bob Schneider
(914)497-5502
Carmel NY 10512
|
By
Bob kc2cwt
·
#10798
·
|
|
Re: HBmontorHelp
Ok Bob,
I was hoping to get you going. Hopefully someone can add some information but I am not sure what road you should go down next.
73
--
Doug Gooden
troytrojan@...
Ok Bob,
I was hoping to get you going. Hopefully someone can add some information but I am not sure what road you should go down next.
73
--
Doug Gooden
troytrojan@...
|
By
Doug - W4DBG
·
#10797
·
|
|
Re: HBmontorHelp
Jinja2 2.11.3
KC2CWT
Bob Schneider
(914)497-5502
Carmel NY 10512
Jinja2 2.11.3
KC2CWT
Bob Schneider
(914)497-5502
Carmel NY 10512
|
By
Bob kc2cwt
·
#10796
·
|
|
Re: HBmontorHelp
What version of Jinja are you running?
--
Doug Gooden
troytrojan@...
What version of Jinja are you running?
--
Doug Gooden
troytrojan@...
|
By
Doug - W4DBG
·
#10795
·
|
|
Re: HBmontorHelp
i ran it this time from /opt/HBmontor Dir and got this
:/opt/HBmonitor# python3 monitor.py
Traceback (most recent call last):
File "monitor.py", line 60, in <module>
from jinja2 import
i ran it this time from /opt/HBmontor Dir and got this
:/opt/HBmonitor# python3 monitor.py
Traceback (most recent call last):
File "monitor.py", line 60, in <module>
from jinja2 import
|
By
Bob kc2cwt
·
#10794
·
|
|
Re: HBmontorHelp
The ‘monitor.py’ has ‘ around it. Not sure why.
Try mv ‘monitor.py’ monitor.py
Then
python3 monitor.py
--
Doug Gooden
troytrojan@...
The ‘monitor.py’ has ‘ around it. Not sure why.
Try mv ‘monitor.py’ monitor.py
Then
python3 monitor.py
--
Doug Gooden
troytrojan@...
|
By
Doug - W4DBG
·
#10793
·
|
|
Re: HBmontorHelp
I get this But its thair
~# python3 monitor.py
python3: can't open file 'monitor.py': [Errno 2] No such file or directory
KC2CWT
Bob Schneider
(914)497-5502
Carmel NY 10512
I get this But its thair
~# python3 monitor.py
python3: can't open file 'monitor.py': [Errno 2] No such file or directory
KC2CWT
Bob Schneider
(914)497-5502
Carmel NY 10512
|
By
Bob kc2cwt
·
#10792
·
|
|
Re: HBmontorHelp
Can you run it in the foreground?
cd /opt/HBMonitor
python3 monitor.py
And see what errors you get?
Doug
W4DBG
--
Doug Gooden
troytrojan@...
Can you run it in the foreground?
cd /opt/HBMonitor
python3 monitor.py
And see what errors you get?
Doug
W4DBG
--
Doug Gooden
troytrojan@...
|
By
Doug - W4DBG
·
#10791
·
|
|
HBmontorHelp
looking for some help with HBmontor
wen i use systemctl start hbmon
I get the err below
If some could point out the fail point as i am just not seeing it
Thanks .
● hbmon.service - HBMonitor
looking for some help with HBmontor
wen i use systemctl start hbmon
I get the err below
If some could point out the fail point as i am just not seeing it
Thanks .
● hbmon.service - HBMonitor
|
By
Bob kc2cwt
·
#10790
·
|
|
Re: What if you could build a AllStar bridge without having to build a AllStar node?
One would presume that if you're running a link, you'd work out such
details with the AllStar node owner (unless you ARE the owner, in which
case you'd just fix it). :)
--
73 de Tony
One would presume that if you're running a link, you'd work out such
details with the AllStar node owner (unless you ARE the owner, in which
case you'd just fix it). :)
--
73 de Tony
|
By
Tony Langdon
·
#10789
·
|
|
Re: What if you could build a AllStar bridge without having to build a AllStar node?
For me, ulaw is all I need. When running links, I want to use as little
compression as possible, because I know audio is likely to hit one of
the high compression vocoders (*MBE, Codec2 etc)
For me, ulaw is all I need. When running links, I want to use as little
compression as possible, because I know audio is likely to hit one of
the high compression vocoders (*MBE, Codec2 etc)
|
By
Tony Langdon
·
#10788
·
|
|
Re: What if you could build a AllStar bridge without having to build a AllStar node?
Yeah, I meant "does it matter" in context that currently only ULAW is supported, so there is no codec priority.
I have come across some nodes in the wild that only negotiate using
Yeah, I meant "does it matter" in context that currently only ULAW is supported, so there is no codec priority.
I have come across some nodes in the wild that only negotiate using
|
By
Patrick Perdue
·
#10787
·
|
|
YSF-N Ref. <-> NXDN Ref.: No continous transmission from YSF to NXDN
#mmdvm_bridge
Hi all,
We are currently playing different approaches to bridge our YSF Reflector with our NXDN Reflector. We have a working setup that bridges NXDN to our XLX Server which is also linked to the YSF
Hi all,
We are currently playing different approaches to bridge our YSF Reflector with our NXDN Reflector. We have a working setup that bridges NXDN to our XLX Server which is also linked to the YSF
|
By
Stephan DG1BGS
·
#10786
·
|
|
Re: What if you could build a AllStar bridge without having to build a AllStar node?
As of today, only ulaw. We are looking at other codec support. I'm not sure I understand the "does it matter" Does it matter if it supports other codecs?
As of today, only ulaw. We are looking at other codec support. I'm not sure I understand the "does it matter" Does it matter if it supports other codecs?
|
By
Steve N4IRS
·
#10785
·
|
|
Re: What if you could build a AllStar bridge without having to build a AllStar node?
What is the codec priority here? Does it support anything other than ulaw, I.E. SLIN or G726-AAL2? In other words, does it matter?
What is the codec priority here? Does it support anything other than ulaw, I.E. SLIN or G726-AAL2? In other words, does it matter?
|
By
Patrick Perdue
·
#10784
·
|
|
Re: What if you could build a AllStar bridge without having to build a AllStar node?
; IAX_Bridge configuration file.
; This file should be placed in either /etc or it can be
; supplied as a path on the IAX_Bridge command line.
[IAX]
; IAX_Bridge configuration file.
; This file should be placed in either /etc or it can be
; supplied as a path on the IAX_Bridge command line.
[IAX]
|
By
Steve N4IRS
·
#10783
·
|
|
Re: DVSwitch YSF
Steve, I have my YSF working now. Not sure if this was part of the issue or not but I wanted to share for your Situational Awareness. I rebooted my node serval times. Each time is was having problems
Steve, I have my YSF working now. Not sure if this was part of the issue or not but I wanted to share for your Situational Awareness. I rebooted my node serval times. Each time is was having problems
|
By
Brett KB5YZB
·
#10782
·
|
|
Re: DVSwitch YSF
After a reboot; here is the log file.
I: 2022-05-12 17:58:48.473 MMDVM_Bridge:
I: 2022-05-12 17:58:48.473 Portions Copyright (C) 2018, 2019, 2020, 2021 DVSwitch, INAD.
I: 2022-05-12 17:58:48.473
After a reboot; here is the log file.
I: 2022-05-12 17:58:48.473 MMDVM_Bridge:
I: 2022-05-12 17:58:48.473 Portions Copyright (C) 2018, 2019, 2020, 2021 DVSwitch, INAD.
I: 2022-05-12 17:58:48.473
|
By
Brett KB5YZB
·
#10781
·
|
|
Re: DVSwitch YSF
Check the logs when you try to connect. /var/log/mmdvm
Check the logs when you try to connect. /var/log/mmdvm
|
By
Steve N4IRS
·
#10780
·
|