|
Re: DMR to AllStar Bridge
i followed the instructions on here https://wiki.allstarlink.org/wiki/ASL_FAQ and I made Allstar work on Google Cloud last night Wasnt too hard.
i followed the instructions on here https://wiki.allstarlink.org/wiki/ASL_FAQ and I made Allstar work on Google Cloud last night Wasnt too hard.
|
By
Alec-N1AJW
·
#1264
·
|
|
Re: DMR to AllStar Bridge
The install script is Debian based. HAMVOIP is ARCH. I doubt it works.
The install script is Debian based. HAMVOIP is ARCH. I doubt it works.
|
By
Steve N4IRS
·
#1263
·
|
|
Re: DMR to AllStar Bridge
Ok after some more digging I'm pretty sure I can use the ras pi that my current node is running on which is a HAMVOIP image.
i'm running the instructions I got from this
Ok after some more digging I'm pretty sure I can use the ras pi that my current node is running on which is a HAMVOIP image.
i'm running the instructions I got from this
|
By
Russell, KV4S
·
#1262
·
|
|
Re: A brief how to, please
Thank you, Steve, for your reply. I am interested in bridging my Echolink node and BM DMRTG704. I would like to know if I would be able to link the conference created by your software to another node
Thank you, Steve, for your reply. I am interested in bridging my Echolink node and BM DMRTG704. I would like to know if I would be able to link the conference created by your software to another node
|
By
TG9AOR
·
#1261
·
|
|
Re: A brief how to, please
That explains it. I was looking there, but I guess the install script doesn't put anything there. I'll give it another try after I get home.
Michael Rickey - AF6FB
949-298-0529 (voice, sms, allo,
That explains it. I was looking there, but I guess the install script doesn't put anything there. I'll give it another try after I get home.
Michael Rickey - AF6FB
949-298-0529 (voice, sms, allo,
|
By
Michael Rickey (AF6FB)
·
#1260
·
|
|
Re: A brief how to, please
your problem is fixed.
apt-get update
apt-get install analog-bridge
All applications and config files are installed in /opt as in /opt/Analog_Bridge
your problem is fixed.
apt-get update
apt-get install analog-bridge
All applications and config files are installed in /opt as in /opt/Analog_Bridge
|
By
Steve N4IRS
·
#1259
·
|
|
Re: A brief how to, please
I'm having problems with this as well.
The only place I've found that talks about installing anything is the post you mentioned. I'm able to get through the first part, when I run "apt-get install
I'm having problems with this as well.
The only place I've found that talks about installing anything is the post you mentioned. I'm able to get through the first part, when I run "apt-get install
|
By
Michael Rickey (AF6FB)
·
#1258
·
|
|
Re: A brief how to, please
José,
Yes, to say the least the documentation has not kept up with the programs. My repository for Analog_Bridge was also behind. I have updated that. The install is using Debian apt and
José,
Yes, to say the least the documentation has not kept up with the programs. My repository for Analog_Bridge was also behind. I have updated that. The install is using Debian apt and
|
By
Steve N4IRS
·
#1257
·
|
|
A brief how to, please
I am almost done reading all 240+ messages in this forum, while doing that I noticed a rough draft in the files section on how to set up Analog Bridge (wiki is empty) After setting up Analog
I am almost done reading all 240+ messages in this forum, while doing that I noticed a rough draft in the files section on how to set up Analog Bridge (wiki is empty) After setting up Analog
|
By
TG9AOR
·
#1256
·
|
|
Re: DMR to AllStar Bridge
Russell,
Your first step will be to get the AllStarLink (ASL) node running. I believe it's possible on AWS. The biggest challenge is DAHDI Which requires the kernel headers.
I suggest
Russell,
Your first step will be to get the AllStarLink (ASL) node running. I believe it's possible on AWS. The biggest challenge is DAHDI Which requires the kernel headers.
I suggest
|
By
Steve N4IRS
·
#1255
·
|
|
Re: DMR to AllStar Bridge
Steve,
Thanks for the response!I'm starting to investigate a cloud host is there anything your recommend as far as linux goes.
this is where i'm starting:
i'm looking at
Steve,
Thanks for the response!I'm starting to investigate a cloud host is there anything your recommend as far as linux goes.
this is where i'm starting:
i'm looking at
|
By
Russell, KV4S
·
#1254
·
|
|
Re: DMR to AllStar Bridge
Russell,
AllStarLink can be bridged to a DMR TG. I can't say if the HAMVOIP version supports what is needed since it is closed source.
In general this is how it will look I am going to
Russell,
AllStarLink can be bridged to a DMR TG. I can't say if the HAMVOIP version supports what is needed since it is closed source.
In general this is how it will look I am going to
|
By
Steve N4IRS
·
#1253
·
|
|
DMR to AllStar Bridge
Hello, I'm new to the DVSwitch group.
I was told there was a software only option do do what i'm trying to
do and link and existing DMR talk group to an existing AllStar node.
Can anyone provide
Hello, I'm new to the DVSwitch group.
I was told there was a software only option do do what i'm trying to
do and link and existing DMR talk group to an existing AllStar node.
Can anyone provide
|
By
Russell, KV4S
·
#1252
·
|
|
Re: I found a NWDR AMBE board in my pile of Pi stuff
You could use it if you wanted to bridge AllStarLink to your P25Reflector Or to bridge a Quantar in P25 mode to AllStarlink.
You could use it if you wanted to bridge AllStarLink to your P25Reflector Or to bridge a Quantar in P25 mode to AllStarlink.
|
By
Steve N4IRS
·
#1251
·
|
|
I found a NWDR AMBE board in my pile of Pi stuff
This board has been sitting for a while in the box just gathering dust. I pulled it out and found some docs on a AMBE server with Pi 3.
Thats up and running. what can I do with this now ?
I have
This board has been sitting for a while in the box just gathering dust. I pulled it out and found some docs on a AMBE server with Pi 3.
Thats up and running. what can I do with this now ?
I have
|
By
Mike AE4ML
·
#1250
·
|
|
Re: New to this group - Interested in DMR to analog linking.
Hei,
I'm a Unix/Linux guy but today I managed build a system which cross-links a BrandMeister talk group to TeamSpeak3 at IRN and EchoLink node OH3NFC-L. The hardware I'm using is a laptop runninng
Hei,
I'm a Unix/Linux guy but today I managed build a system which cross-links a BrandMeister talk group to TeamSpeak3 at IRN and EchoLink node OH3NFC-L. The hardware I'm using is a laptop runninng
|
By
Veijo Arponen OH4VA
·
#1249
·
|
|
Re: DMR ID System
Understand Glen. Thank you very much for working on this. Great to know a resolution is in the process.
Carter, KH6FV
Understand Glen. Thank you very much for working on this. Great to know a resolution is in the process.
Carter, KH6FV
|
By
C Davis
·
#1248
·
|
|
Re: DMR ID System
Carter,
This is because I got the data from Hans's JSON dump, which is GDPR compliant. He is suppose to be giving me a special JSON dump that should contain all the data, which I can them update the
Carter,
This is because I got the data from Hans's JSON dump, which is GDPR compliant. He is suppose to be giving me a special JSON dump that should contain all the data, which I can them update the
|
By
Glen Bizeau
·
#1247
·
|
|
Re: DMR ID System
Glen,
I noticed all the new registrations when they started...3100002 to the latest 3100304 don't have the State information. Either the registration form is not set up correctly to capture this data
Glen,
I noticed all the new registrations when they started...3100002 to the latest 3100304 don't have the State information. Either the registration form is not set up correctly to capture this data
|
By
C Davis
·
#1246
·
|
|
DMR ID System
Do to some complication, we switch the ID system again, I now have it running under my own domain https://www.radioid.net I believe you will still be able to get the CSV and jSON files from
Do to some complication, we switch the ID system again, I now have it running under my own domain https://www.radioid.net I believe you will still be able to get the CSV and jSON files from
|
By
Glen Bizeau
·
#1245
·
|