|
Re: P25 Gateway <---> allstar
P25Gateway has a config file:
[General]
Callsign=G4KLX
RptAddress=127.0.0.1
RptPort=32010
LocalPort=42020
Announcements=1
Daemon=0
[Id Lookup]
P25Gateway has a config file:
[General]
Callsign=G4KLX
RptAddress=127.0.0.1
RptPort=32010
LocalPort=42020
Announcements=1
Daemon=0
[Id Lookup]
|
By
Steve N4IRS
·
#1279
·
|
|
Re: P25 Gateway <---> allstar
I have P25Gateway running and pointed to P25Reflector on another box, this seems to be working fine...I think.
Analog bridge
MMDVM bridge
P25Gateway run on the same box
P25Reflector runs on a
I have P25Gateway running and pointed to P25Reflector on another box, this seems to be working fine...I think.
Analog bridge
MMDVM bridge
P25Gateway run on the same box
P25Reflector runs on a
|
By
Jeff Carrier
·
#1278
·
|
|
Re: P25 Gateway <---> allstar
Do you have P25Gateway running? You need it to connect to the reflector.
In MMDVM_Bridge.ini
[P25 Network]
Enable=1
GatewayAddress=10.1.2.245
GatewayPort=34103
Do you have P25Gateway running? You need it to connect to the reflector.
In MMDVM_Bridge.ini
[P25 Network]
Enable=1
GatewayAddress=10.1.2.245
GatewayPort=34103
|
By
Steve N4IRS
·
#1277
·
|
|
Re: P25 Gateway <---> allstar
Analog_Bridge.ini
; Analog_Bridge configuration file.
; This file should be placed in either /etc or it can be
; supplied as a path on the Analog_Bridge command line.
; General Section describes
Analog_Bridge.ini
; Analog_Bridge configuration file.
; This file should be placed in either /etc or it can be
; supplied as a path on the Analog_Bridge command line.
; General Section describes
|
By
Jeff Carrier
·
#1276
·
|
|
Re: P25 Gateway <---> allstar
Please show us your Analog_Bridge.ini DVSwitch.ini and MMDVM_Bridge.ini
Please show us your Analog_Bridge.ini DVSwitch.ini and MMDVM_Bridge.ini
|
By
Steve N4IRS
·
#1275
·
|
|
Re: P25 Gateway <---> allstar
Ok i'm not sure if this is progress or not. I've been through Analog_Bridge.ini dvswitch.ini and MMDVM_Bridge.ini trying to tweak ports and understand how they talk to each other. Now I'm seeing
Ok i'm not sure if this is progress or not. I've been through Analog_Bridge.ini dvswitch.ini and MMDVM_Bridge.ini trying to tweak ports and understand how they talk to each other. Now I'm seeing
|
By
Jeff Carrier
·
#1274
·
|
|
Cisco VIC3 cards for passing Analog over a network
Has anyone else ever played with these cards ?
Mike AE4ML
Has anyone else ever played with these cards ?
Mike AE4ML
|
By
Mike AE4ML
·
#1273
·
|
|
Re: P25 Gateway <---> allstar
Analog_Bridge.ini
; Information for xx_Bridges (Where xx is MMDVM, HB, IPSC)
[AMBE_AUDIO]
server = 10.1.2.245 ; IP address of MMDVM_Bridge
fromDMRPort =
Analog_Bridge.ini
; Information for xx_Bridges (Where xx is MMDVM, HB, IPSC)
[AMBE_AUDIO]
server = 10.1.2.245 ; IP address of MMDVM_Bridge
fromDMRPort =
|
By
Steve N4IRS
·
#1272
·
|
|
Re: P25 Gateway <---> allstar
; Analog_Bridge configuration file.
; This file should be placed in either /etc or it can be
; supplied as a path on the Analog_Bridge command line.
; General Section describes settings for
; Analog_Bridge configuration file.
; This file should be placed in either /etc or it can be
; supplied as a path on the Analog_Bridge command line.
; General Section describes settings for
|
By
Jeff Carrier
·
#1271
·
|
|
Re: P25 Gateway <---> allstar
Analog_Bridge.ini?
By
Steve N4IRS
·
#1270
·
|
|
Re: P25 Gateway <---> allstar
Here is dvswitch.ini
; MMDVM_Bridge configuration file.
; This file should be placed along side of MMDVM_Bridge or it can be
; supplied as a path on the MMDVM_BRIDGE environment variable.
;
Here is dvswitch.ini
; MMDVM_Bridge configuration file.
; This file should be placed along side of MMDVM_Bridge or it can be
; supplied as a path on the MMDVM_BRIDGE environment variable.
;
|
By
Jeff Carrier
·
#1269
·
|
|
Re: P25 Gateway <---> allstar
DVSwitch.ini is the file that manages the ports and addresses used by MMDVM_Bridge to export and import data from a Partner. In this case Analog_Bridge.
It's hard to troubleshoot your error
DVSwitch.ini is the file that manages the ports and addresses used by MMDVM_Bridge to export and import data from a Partner. In this case Analog_Bridge.
It's hard to troubleshoot your error
|
By
Steve N4IRS
·
#1268
·
|
|
P25 Gateway <---> allstar
I feel like I may be getting closer with AllStarLink <---> Analog_Bridge <---> MMDVM_Bridge <---> P25Gateway <--> P25Reflector (i'm also trying to figure out where dvswitch.ini figures into this)
My
I feel like I may be getting closer with AllStarLink <---> Analog_Bridge <---> MMDVM_Bridge <---> P25Gateway <--> P25Reflector (i'm also trying to figure out where dvswitch.ini figures into this)
My
|
By
Jeff Carrier
·
#1267
·
|
|
Re: DMR to AllStar Bridge
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...
All the DVSwitch programs are installed in /opt
/opt/Analog_Bridge
/opt MMDVM_Bridge
/opt/...
|
By
Steve N4IRS
·
#1266
·
|
|
Re: DMR to AllStar Bridge
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.
I installed the ASL and the DVSwitch.
All appears to have
Ok, I started over from scratch with AWS. I think i was loading the wrong images previously I loaded the Ubuntu 16.04 and that was the key.
I installed the ASL and the DVSwitch.
All appears to have
|
By
Russell, KV4S
·
#1265
·
|
|
Re: DMR to AllStar Bridge
i followed the instructions on here https://wiki.allstarlink.org/wiki/ASL_FAQ and I made Allstar work on Google Cloud last night Wasnt too hard.
i followed the instructions on here https://wiki.allstarlink.org/wiki/ASL_FAQ and I made Allstar work on Google Cloud last night Wasnt too hard.
|
By
Alec-N1AJW
·
#1264
·
|
|
Re: DMR to AllStar Bridge
The install script is Debian based. HAMVOIP is ARCH. I doubt it works.
The install script is Debian based. HAMVOIP is ARCH. I doubt it works.
|
By
Steve N4IRS
·
#1263
·
|
|
Re: DMR to AllStar Bridge
Ok after some more digging I'm pretty sure I can use the ras pi that my current node is running on which is a HAMVOIP image.
i'm running the instructions I got from this
Ok after some more digging I'm pretty sure I can use the ras pi that my current node is running on which is a HAMVOIP image.
i'm running the instructions I got from this
|
By
Russell, KV4S
·
#1262
·
|
|
Re: A brief how to, please
Thank you, Steve, for your reply. I am interested in bridging my Echolink node and BM DMRTG704. I would like to know if I would be able to link the conference created by your software to another node
Thank you, Steve, for your reply. I am interested in bridging my Echolink node and BM DMRTG704. I would like to know if I would be able to link the conference created by your software to another node
|
By
TG9AOR
·
#1261
·
|
|
Re: A brief how to, please
That explains it. I was looking there, but I guess the install script doesn't put anything there. I'll give it another try after I get home.
Michael Rickey - AF6FB
949-298-0529 (voice, sms, allo,
That explains it. I was looking there, but I guess the install script doesn't put anything there. I'll give it another try after I get home.
Michael Rickey - AF6FB
949-298-0529 (voice, sms, allo,
|
By
Michael Rickey (AF6FB)
·
#1260
·
|