|
Re: Rpi3 Bridge
Appreciate it, That got it going, kind of. Analog is passing to dmr fine. audio needs adjusting but works. dmr to analog only causes a kerchunk to come though. watching MMDVM_Bridge it seems to be
Appreciate it, That got it going, kind of. Analog is passing to dmr fine. audio needs adjusting but works. dmr to analog only causes a kerchunk to come though. watching MMDVM_Bridge it seems to be
|
By
Justin Morris
·
#1428
·
|
|
Re: Analog_Bridge.ini
Jeff,
You can't run USRP and Simple USB in the same node stanza at the same time. Each node stanza has a unique rxchannel.
It should look something like this:
[1999]
Jeff,
You can't run USRP and Simple USB in the same node stanza at the same time. Each node stanza has a unique rxchannel.
It should look something like this:
[1999]
|
By
Steve N4IRS
·
#1427
·
|
|
Re: Analog_Bridge.ini
Steve,
You mentioned something yesterday that created a question in my mind. You said USRP and SimpleUSB can't run together on the same box. I'm assuming that has something to do with those two
Steve,
You mentioned something yesterday that created a question in my mind. You said USRP and SimpleUSB can't run together on the same box. I'm assuming that has something to do with those two
|
By
Jeff Carrier
·
#1426
·
|
|
Analog_Bridge.ini
We are working to simplify and standardize the configuration files across all the Partner programs. Analog_Bridge.ini is one of the oldest and needs a little facelift to better match the other
We are working to simplify and standardize the configuration files across all the Partner programs. Analog_Bridge.ini is one of the oldest and needs a little facelift to better match the other
|
By
Steve N4IRS
·
#1425
·
|
|
Re: Rpi3 Bridge
In Analog_Bridge.ini Do not use the same ID for both gatewayDmrId and repeaterID
I suggest the gatewayDmrId should be your 7 digit DMR ID
Run MMDVM_Bridge MMDVM_Bridge.ini in
In Analog_Bridge.ini Do not use the same ID for both gatewayDmrId and repeaterID
I suggest the gatewayDmrId should be your 7 digit DMR ID
Run MMDVM_Bridge MMDVM_Bridge.ini in
|
By
Steve N4IRS
·
#1424
·
|
|
Re: Rpi3 Bridge
Could you help me find what is broken? I can connect to my other node from asl. I do not see the id's i chose in my brandmiester hotspot list
; Analog_Bridge configuration file.
; This file should
Could you help me find what is broken? I can connect to my other node from asl. I do not see the id's i chose in my brandmiester hotspot list
; Analog_Bridge configuration file.
; This file should
|
By
Justin Morris
·
#1423
·
|
|
Re: Rpi3 Bridge
That is a leftover from a older version and will be removed. It is done by ASL during install.
Steve
That is a leftover from a older version and will be removed. It is done by ASL during install.
Steve
|
By
Steve N4IRS
·
#1422
·
|
|
Rpi3 Bridge
Could someone elaborate on the line in Analog_Bridge.ini that says "for RPI, don"t forget to modprobe sns_pcm_oss to get the devices populated"
How do I do this?
Could someone elaborate on the line in Analog_Bridge.ini that says "for RPI, don"t forget to modprobe sns_pcm_oss to get the devices populated"
How do I do this?
|
By
Justin Morris
·
#1421
·
|
|
Re: DMR to AllStar Bridge - Private Call to DMR ID without a TG?
Hi Corey,
This is the excerpt:
Address=3103.repeater.net
Port=62031
Jitter=750
Local=62032
Password=passw0rd
As you can see, it is passw0rd. It does connect for a bit but then it disconnects and
Hi Corey,
This is the excerpt:
Address=3103.repeater.net
Port=62031
Jitter=750
Local=62032
Password=passw0rd
As you can see, it is passw0rd. It does connect for a bit but then it disconnects and
|
By
Lito - WI6Y
·
#1420
·
|
|
Re: DMR to AllStar Bridge - Private Call to DMR ID without a TG?
You have the wrong password in the config for connecting to the master. It should be passw0rd
You have the wrong password in the config for connecting to the master. It should be passw0rd
|
By
Corey Dean N3FE <n3fe@...>
·
#1419
·
|
|
Re: DMR to AllStar Bridge - Private Call to DMR ID without a TG?
Hi Steve,
I am getting these messages from my MMDVM_bridge log.
M: 2018-05-30 20:17:45.579 DMR, TX state = ON
I: 2018-05-30 20:17:45.579 DMR, Begin TX: src=1107374 rpt=110737480 dst=5152 slot=2 cc=1
Hi Steve,
I am getting these messages from my MMDVM_bridge log.
M: 2018-05-30 20:17:45.579 DMR, TX state = ON
I: 2018-05-30 20:17:45.579 DMR, Begin TX: src=1107374 rpt=110737480 dst=5152 slot=2 cc=1
|
By
Lito - WI6Y
·
#1418
·
|
|
Re: Updated DVSwitch repository available
I tuned my audio last night and ended up with the settings below. First I connected the my bridged node to a local repeater node and equalized the audio listening on DMR and Analog. Once the DMR
I tuned my audio last night and ended up with the settings below. First I connected the my bridged node to a local repeater node and equalized the audio listening on DMR and Analog. Once the DMR
|
By
WillieB <will@...>
·
#1417
·
|
|
Re: DMR to ASL audio level
Thanks Steve,
That DMR Audio increase tip - worked perfectly. The DMR side came up (what I needed) to get the analog listeners (Allstar) up to a good level.
Our assigned BM/TG 31085 is connected
Thanks Steve,
That DMR Audio increase tip - worked perfectly. The DMR side came up (what I needed) to get the analog listeners (Allstar) up to a good level.
Our assigned BM/TG 31085 is connected
|
By
Peter Buckley
·
#1416
·
|
|
Re: DMR to ASL audio level
Peter,
Use:
dmrAudio = AUDIO_USE_GAIN ; Audio from ASL (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF)
dmrGain = 2 ; Gain
Peter,
Use:
dmrAudio = AUDIO_USE_GAIN ; Audio from ASL (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF)
dmrGain = 2 ; Gain
|
By
Steve N4IRS
·
#1415
·
|
|
DMR to ASL audio level
Thanks Steve,
Please make a suggestion as your schedule allows.
Symptom needing help: low volume audio coming back in from DMR side to Allstar side.
My current Analog_Bridge.ini is below.
Thanks Steve,
Please make a suggestion as your schedule allows.
Symptom needing help: low volume audio coming back in from DMR side to Allstar side.
My current Analog_Bridge.ini is below.
|
By
Peter Buckley
·
#1414
·
|
|
Re: A brief how to, please
I have a low cost vps cloud at cost. Not the best but works however my OS choice is very limited.
I have a low cost vps cloud at cost. Not the best but works however my OS choice is very limited.
|
By
Paul Nannery KC2VRJ
·
#1413
·
|
|
Re: A brief how to, please
Happy to help. It allowed me to find and fix a issue. I'm building everything on Jessie for now so bith Jessie and Stretch are supported.
Steve
Happy to help. It allowed me to find and fix a issue. I'm building everything on Jessie for now so bith Jessie and Stretch are supported.
Steve
|
By
Steve N4IRS
·
#1412
·
|
|
Re: A brief how to, please
Steve,
Thank you for your help it installed now to make it all play nice
Steve,
Thank you for your help it installed now to make it all play nice
|
By
Paul Nannery KC2VRJ
·
#1411
·
|
|
Re: Updated DVSwitch repository available
Mike,
Analog_Bridge is one of the programs in the overall DVSwitch "family" We have enhanced Analog_Bridge and added MMDVM_Bridge, Quantar_Bridge and a few others. We are still early in
Mike,
Analog_Bridge is one of the programs in the overall DVSwitch "family" We have enhanced Analog_Bridge and added MMDVM_Bridge, Quantar_Bridge and a few others. We are still early in
|
By
Steve N4IRS
·
#1410
·
|
|
Re: Updated DVSwitch repository available
Steve,
I may have fallen behind with the announcement so my apologies. Is DVSwitch replacing Analog_Bridge from github since it also contains Analog_Bridge and has much more functionality? It looks
Steve,
I may have fallen behind with the announcement so my apologies. Is DVSwitch replacing Analog_Bridge from github since it also contains Analog_Bridge and has much more functionality? It looks
|
By
Mike, AA9VI
·
#1409
·
|