|
How to configure a ASL server
Excellent document. Thank you so much. As you may or may not recall, I followed Kv4S's how to guide, it in turn made reference to another how to guide on setting up the allstar node. It differs
Excellent document. Thank you so much. As you may or may not recall, I followed Kv4S's how to guide, it in turn made reference to another how to guide on setting up the allstar node. It differs
|
By
TG9AOR
·
#1621
·
|
|
Network Watchdog cutting off feed to YSFReflector
I noticed that sporadically my DMR transmissions on TG704 would not make it 100% into YSFreflector. Log output below:
I: 2018-06-09 00:36:31.144 YSF, Narrow transmit (72 bit)
M: 2018-06-09
I noticed that sporadically my DMR transmissions on TG704 would not make it 100% into YSFreflector. Log output below:
I: 2018-06-09 00:36:31.144 YSF, Narrow transmit (72 bit)
M: 2018-06-09
|
By
TG9AOR
·
#1620
·
|
|
Re: New member, few questions regarding hblink/hb_bridge/hb_confbridge
If you have each client have a different connection setup you could use conf bridge and manage this quite easily.
If you have each client have a different connection setup you could use conf bridge and manage this quite easily.
|
By
Corey Dean N3FE <n3fe@...>
·
#1619
·
|
|
Re: "Blocked" Message on Brandmeister
I: 2018-06-08 19:08:24.977 DMR Network Parameters
I: 2018-06-08 19:08:24.977 Address: 104.236.174.109
I: 2018-06-08 19:08:24.977 Port: 55555
I: 2018-06-08 19:08:24.977
I: 2018-06-08 19:08:24.977 DMR Network Parameters
I: 2018-06-08 19:08:24.977 Address: 104.236.174.109
I: 2018-06-08 19:08:24.977 Port: 55555
I: 2018-06-08 19:08:24.977
|
By
Steve N4IRS
·
#1618
·
|
|
Re: New member, few questions regarding hblink/hb_bridge/hb_confbridge
In my testing with repeat off even if using the bridged talkgroup the other clients on the same master don't hear it which is what I was looking for. Thanks again for the help.
Cokby
In my testing with repeat off even if using the bridged talkgroup the other clients on the same master don't hear it which is what I was looking for. Thanks again for the help.
Cokby
|
By
Colby Ross W1BSB
·
#1617
·
|
|
Re: New member, few questions regarding hblink/hb_bridge/hb_confbridge
repeat only controls traffic passing within a Master. It does not effect traffic passing through the conf_bridge. At least I think so.
repeat only controls traffic passing within a Master. It does not effect traffic passing through the conf_bridge. At least I think so.
|
By
Steve N4IRS
·
#1616
·
|
|
Re: New member, few questions regarding hblink/hb_bridge/hb_confbridge
That's what I thought. Thanks Steve. So at this time if repeat were off there would be no way to define a list of talk groups that would be repeated to other clients which was kind of what I thought.
That's what I thought. Thanks Steve. So at this time if repeat were off there would be no way to define a list of talk groups that would be repeated to other clients which was kind of what I thought.
|
By
Colby Ross W1BSB
·
#1615
·
|
|
Re: New member, few questions regarding hblink/hb_bridge/hb_confbridge
If two clients are connected to the same Master and repeat is turned on, all traffic will pass between the two clients.
If two clients are connected to different Master and repeat is turned
If two clients are connected to the same Master and repeat is turned on, all traffic will pass between the two clients.
If two clients are connected to different Master and repeat is turned
|
By
Steve N4IRS
·
#1614
·
|
|
Re: "Blocked" Message on Brandmeister
attached...
By
Mike, AA9VI
·
#1613
·
|
|
Re: DMR to ASL audio level
Funny you should ask. While trying to write the documentation for this we realized that the names and comments need fixing. For now, here is the info:
aslAudio = AUDIO_UNITY ; Audio to
Funny you should ask. While trying to write the documentation for this we realized that the names and comments need fixing. For now, here is the info:
aslAudio = AUDIO_UNITY ; Audio to
|
By
Steve N4IRS
·
#1612
·
|
|
Re: DMR to ASL audio level
Thank you. One last question.
To adjust the DMR to ASL, can I use AUDIO_USE_GAIN? If so, which number would I adjust? I only see an option for agcGain. I need to increase my audio from DRM to AllStar.
Thank you. One last question.
To adjust the DMR to ASL, can I use AUDIO_USE_GAIN? If so, which number would I adjust? I only see an option for agcGain. I need to increase my audio from DRM to AllStar.
|
By
Greg Hovland
·
#1611
·
|
|
Re: DMR to ASL audio level
No,
Just restart Analog_Bridge
systemctl restart analog_bridge
No,
Just restart Analog_Bridge
systemctl restart analog_bridge
|
By
Steve N4IRS
·
#1610
·
|
|
Re: DMR to ASL audio level
If I make changes to the audio levels, do I need to reboot the system?
If I make changes to the audio levels, do I need to reboot the system?
|
By
Greg Hovland
·
#1609
·
|
|
Re: New member, few questions regarding hblink/hb_bridge/hb_confbridge
There is not. I didn't want every talk group being repeated, only ones that were defined.
Colby
There is not. I didn't want every talk group being repeated, only ones that were defined.
Colby
|
By
Colby Ross W1BSB
·
#1608
·
|
|
Re: New member, few questions regarding hblink/hb_bridge/hb_confbridge
Colby,
Is there not a,repeat = Y in the hblink ini file?
73,
Peter
Sent from Outlook
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Colby Ross W1BSB <colbypr@...>
Sent: 08 June
Colby,
Is there not a,repeat = Y in the hblink ini file?
73,
Peter
Sent from Outlook
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Colby Ross W1BSB <colbypr@...>
Sent: 08 June
|
By
Peter M0NWI
·
#1607
·
|
|
Re: New member, few questions regarding hblink/hb_bridge/hb_confbridge
Ok, so I've been playing around with hb_confbridge and I think I understand how the bridging portion works now. I set up 2 masters and had a working bridge between them. For this example, we have
Ok, so I've been playing around with hb_confbridge and I think I understand how the bridging portion works now. I set up 2 masters and had a working bridge between them. For this example, we have
|
By
Colby Ross W1BSB
·
#1605
·
|
|
locked
Bug found and fixed.
In this topic we will announce bugfixes. Some fixes are minor and some are more important. (Duh! Thanks Captain Obvious)
We will post the issue and how to resolve. I am going to lock this thread so
In this topic we will announce bugfixes. Some fixes are minor and some are more important. (Duh! Thanks Captain Obvious)
We will post the issue and how to resolve. I am going to lock this thread so
|
By
Steve N4IRS
·
#1604
·
Edited
|
|
Re: DTMF
This is what I was referring to. Sorry I should have read everything before responding. My bad...
Corey n3fe
This is what I was referring to. Sorry I should have read everything before responding. My bad...
Corey n3fe
|
By
Corey Dean N3FE <n3fe@...>
·
#1603
·
|
|
Re: DTMF
Isn’t there something already like this? I used to do this all the time where if telemetry was done locally it would allow all telemetry to talk for about 5 minutes and then would silence until it
Isn’t there something already like this? I used to do this all the time where if telemetry was done locally it would allow all telemetry to talk for about 5 minutes and then would silence until it
|
By
Corey Dean N3FE <n3fe@...>
·
#1602
·
|
|
Re: Intermittent No Audio
It's nothing with brandmeister, check the way you handle that first packet I forget what it's called but the one dvmega thought was always the same ended up not being. Basically I resolved that issue
It's nothing with brandmeister, check the way you handle that first packet I forget what it's called but the one dvmega thought was always the same ended up not being. Basically I resolved that issue
|
By
Ty - KG5RKI <tydweaver@...>
·
#1601
·
|