|
Re: Early Adopters Pre-Sale for the Digital Radio Amateur Workstation - DRAWS
Will,
It uses some of the GPIO busses and pins. These are not compatible across SBCs. A lot of the capability is due to the use of this functionality and would be limited by making it a USB device.
Will,
It uses some of the GPIO busses and pins. These are not compatible across SBCs. A lot of the capability is due to the use of this functionality and would be limited by making it a USB device.
|
By
John Hays - K7VE / WRJT-215
·
#2284
·
|
|
Re: dmr
I also restarted the bm service on all the US masters tonight to update a few scripts and it was roughly during this time.
Corey. N3fe
I also restarted the bm service on all the US masters tonight to update a few scripts and it was roughly during this time.
Corey. N3fe
|
By
Corey Dean N3FE <n3fe@...>
·
#2283
·
|
|
Re: dmr
What is your dmr id, not your callsign.
What is your dmr id, not your callsign.
|
By
Corey Dean N3FE <n3fe@...>
·
#2282
·
|
|
Re: Early Adopters Pre-Sale for the Digital Radio Amateur Workstation - DRAWS
John,
Nice product, why not make the little unit compatible with other SBCs other than Rasberry Pi? Maybe an added usb port to interface would make the unit interface with
John,
Nice product, why not make the little unit compatible with other SBCs other than Rasberry Pi? Maybe an added usb port to interface would make the unit interface with
|
By
Will - W4WWM <w4wwm@...>
·
#2281
·
|
|
Re: dmr
My call is WV8CW.trying to log in 3101.
: 2018-09-25 01:15:38.900
My call is WV8CW.trying to log in 3101.
: 2018-09-25 01:15:38.900
|
By
Charles Wiant
·
#2280
·
|
|
Re: dmr
Check RadioID.net; I registered through them. My DMR ID is 3120252.
Check RadioID.net; I registered through them. My DMR ID is 3120252.
|
By
Pat Gannaway/WA0URU
·
#2279
·
|
|
Re: dmr
Make sure all of your firmware is updated everywhere. I'm not as familiar with the MMDVM setup, but with CBridges and repeaters, outdated firmware will behave as you are describing.
Make sure all of your firmware is updated everywhere. I'm not as familiar with the MMDVM setup, but with CBridges and repeaters, outdated firmware will behave as you are describing.
|
By
Jason Johnston
·
#2278
·
|
|
Re: dmr
I was looking up your DMRID and I do not see that there was a DMRID issued to you. If you do have one, supply us with the info0rmation and the server you are trying to connect to and we
I was looking up your DMRID and I do not see that there was a DMRID issued to you. If you do have one, supply us with the info0rmation and the server you are trying to connect to and we
|
By
Mark N2NUO <n2nuo@...>
·
#2277
·
|
|
Re: dmr
Any errors? Is it a program error or is tuenmaster not letting you connect. We really need something more to go on.
Corey n3fe
Any errors? Is it a program error or is tuenmaster not letting you connect. We really need something more to go on.
Corey n3fe
|
By
Corey Dean N3FE <n3fe@...>
·
#2276
·
|
|
dmr
mmdvm bridge not staying connected was last night now it keeps opening and closing
mmdvm bridge not staying connected was last night now it keeps opening and closing
|
By
Charles Wiant
·
#2275
·
|
|
Early Adopters Pre-Sale for the Digital Radio Amateur Workstation - DRAWS
DRAWS - Raspberry Pi HAT
[The boards will be run in the next couple of weeks, this is an opportunity to order early and save $20 on the board, and $5 on the GPS LNA Antenna]
HW Features: Operating
DRAWS - Raspberry Pi HAT
[The boards will be run in the next couple of weeks, this is an opportunity to order early and save $20 on the board, and $5 on the GPS LNA Antenna]
HW Features: Operating
|
By
John Hays - K7VE / WRJT-215
·
#2274
·
|
|
Re: DMRlink - bridging GPS - private data
Cheers Cort, didn't want to bug you on retired stuff, and wondered if anyone else had brute forced their way through it :)
I'm informed that GPS is delivered as a kinda SMS to a router with a link to
Cheers Cort, didn't want to bug you on retired stuff, and wondered if anyone else had brute forced their way through it :)
I'm informed that GPS is delivered as a kinda SMS to a router with a link to
|
By
Peter M0NWI
·
#2273
·
|
|
Re: DMRlink - bridging GPS - private data
You could just ask the guy who wrote it… ‘cause you know, he’s on this list too.
I would not trust the data routing routines in bridge.py. They were never completed, and may kinda work, but have
You could just ask the guy who wrote it… ‘cause you know, he’s on this list too.
I would not trust the data routing routines in bridge.py. They were never completed, and may kinda work, but have
|
By
Cort N0MJS <n0mjs@...>
·
#2272
·
|
|
DMRlink - bridging GPS - private data
All,
Before I run off down the rabbit hole, has anyone proven that the bridging of Private_data packets works under DMRlink?
I can see the code is there for the packet type callback in bridge.py,
All,
Before I run off down the rabbit hole, has anyone proven that the bridging of Private_data packets works under DMRlink?
I can see the code is there for the packet type callback in bridge.py,
|
By
Peter M0NWI
·
#2271
·
|
|
Re: Help trascoding DMR <> P25
Ok, Many thx Steve.
By
EA5GVK Joaquin
·
#2270
·
|
|
Re: Help trascoding DMR <> P25
That is a correct layout of the software.
You can use md380-emu for DMR decode / encode
OP25 does P25 Decode / encode It is built into Analog_Bridge. Nothing external needed.
73,
That is a correct layout of the software.
You can use md380-emu for DMR decode / encode
OP25 does P25 Decode / encode It is built into Analog_Bridge. Nothing external needed.
73,
|
By
Steve N4IRS
·
#2269
·
|
|
Help trascoding DMR <> P25
Hi, please need help.
The logic I think I understand would be using this software in this order:
P25Reflector <-> P25Gateway <-> MMDVM_Bridge <-> Analog_Bridge_1 <-> Analog_Bridge_2 <-> MMDVM_Bridge
Hi, please need help.
The logic I think I understand would be using this software in this order:
P25Reflector <-> P25Gateway <-> MMDVM_Bridge <-> Analog_Bridge_1 <-> Analog_Bridge_2 <-> MMDVM_Bridge
|
By
EA5GVK Joaquin
·
#2268
·
|
|
Re: Setting up Analog_bridge for P25
Update, I got this working :)
Turns out I had the wrong port numbers in the Analog_bridge ini file for txPort and rxPort under the [AMBE_AUDIO] section, I corrected that and now have bi-directional
Update, I got this working :)
Turns out I had the wrong port numbers in the Analog_bridge ini file for txPort and rxPort under the [AMBE_AUDIO] section, I corrected that and now have bi-directional
|
By
Stephen Brown - K1LNX
·
#2267
·
|
|
Re: DR1X latest firmware
Thank you for the answers both David and John. The repeater is DR1X, not XE FR and the firmware is the latest according to Yaesu U.K. I have no reason to believe otherwise. I tent to believe that it
Thank you for the answers both David and John. The repeater is DR1X, not XE FR and the firmware is the latest according to Yaesu U.K. I have no reason to believe otherwise. I tent to believe that it
|
By
Manos Darkadakis
·
#2266
·
|
|
Re: Setting up Analog_bridge for P25
Just as a general FYI:
For DMR in order of quality, best to worst:
DV3000
md380-emu
OP25
OP25 does P25 well
OP25 does DMR "OK"
OP25 does D-Star "Just slightly better
Just as a general FYI:
For DMR in order of quality, best to worst:
DV3000
md380-emu
OP25
OP25 does P25 well
OP25 does DMR "OK"
OP25 does D-Star "Just slightly better
|
By
Steve N4IRS
·
#2265
·
|