|
Re: DMR/AllStar one way audio
This sounds like something (port#'s) in the file changed and not realized until the reboot.
Check the port data between ambe audio and analog bridge and then from there to mmdvm bridge.
OR
Follow
This sounds like something (port#'s) in the file changed and not realized until the reboot.
Check the port data between ambe audio and analog bridge and then from there to mmdvm bridge.
OR
Follow
|
By
Mike KB8JNM
·
#2309
·
|
|
Re: DMR/AllStar one way audio
Well, it sounds like you have your bridge on a public node.
Hard to have 'selective control' that way.
Think of it a bit backwards.
I have dmr tg 91 set-up on 29999 for the last several months.
It's
Well, it sounds like you have your bridge on a public node.
Hard to have 'selective control' that way.
Think of it a bit backwards.
I have dmr tg 91 set-up on 29999 for the last several months.
It's
|
By
Mike KB8JNM
·
#2308
·
|
|
Re: DMR/AllStar one way audio
I have md380-emu running too on my pi3, dmr to ASL audio is OK, but ASL to DMR , there are a lot of DMR stations complain that my audio is like a robot.
Any optimization can be done?
I have md380-emu running too on my pi3, dmr to ASL audio is OK, but ASL to DMR , there are a lot of DMR stations complain that my audio is like a robot.
Any optimization can be done?
|
By
Eddie Lim 9W2LWK
·
#2307
·
|
|
Re: DMR/AllStar one way audio
Jeff,
The logs are there to help in troubleshooting. Since your problem is ASL -> DMR, consider the following diagram:
ASL -> Analog_Bridge -> MMDVM_Bridge -> BrandMeister
When traffic
Jeff,
The logs are there to help in troubleshooting. Since your problem is ASL -> DMR, consider the following diagram:
ASL -> Analog_Bridge -> MMDVM_Bridge -> BrandMeister
When traffic
|
By
Steve N4IRS
·
#2306
·
|
|
DMR/AllStar one way audio
Running Allstarlink (ASL) with Analog_Bridge , md380-emu and MMDVM_Bridge......
Got it up and running last night, had a qso from allstar to dmr and DMR back to allstar with "PERFECT" audio
Running Allstarlink (ASL) with Analog_Bridge , md380-emu and MMDVM_Bridge......
Got it up and running last night, had a qso from allstar to dmr and DMR back to allstar with "PERFECT" audio
|
By
Jeff Wood
·
#2305
·
|
|
Re: DMR/AllStar one way audio
yeah, i knew about that one, but i cant guarantee that the connecting station will connect in monitor mode :)
yeah, i knew about that one, but i cant guarantee that the connecting station will connect in monitor mode :)
|
By
Jim - K6JWN
·
#2304
·
|
|
Re: DMR/AllStar one way audio
If I understand your question right
...
Just connect to your DMR Bridged node in RX (*2xxxx)
...mike/kb8jnm
If I understand your question right
...
Just connect to your DMR Bridged node in RX (*2xxxx)
...mike/kb8jnm
|
By
Mike KB8JNM
·
#2303
·
|
|
DMR/AllStar one way audio
I have a working DMR to Allstar setup (thanks for the help!). I have a friend of mine who wants to listen in to the monday night papa system roundtable through my allstar node. Is there a quick and
I have a working DMR to Allstar setup (thanks for the help!). I have a friend of mine who wants to listen in to the monday night papa system roundtable through my allstar node. Is there a quick and
|
By
Jim - K6JWN
·
#2302
·
|
|
Re: DMR Bridge not "un-keying" problem
This comes from the old phone patch protocol: “star-up, pound-down”
But, with Allstar, you can configure this to be whatever you want in rpt.conf
cop, 6 is the function to key up the
This comes from the old phone patch protocol: “star-up, pound-down”
But, with Allstar, you can configure this to be whatever you want in rpt.conf
cop, 6 is the function to key up the
|
By
Ken KE2N
·
#2301
·
|
|
Re: DMR Bridge not "un-keying" problem
Hi,
Thanks very much for the info! I never heard it was # before. The info I've seen and a couple of youtube videos say *99 is a TX toggle. Well thanks for clearing that up!
-Steve
W7RD
Hi,
Thanks very much for the info! I never heard it was # before. The info I've seen and a couple of youtube videos say *99 is a TX toggle. Well thanks for clearing that up!
-Steve
W7RD
|
By
steve@...
·
#2300
·
|
|
Re: DMR Bridge not "un-keying" problem
As Paul correctly pointed out, it is # to drop the tx
But, I'm wondering where you had got the idea it was 99 again,
You are not the first to have that assumption. Did you read this somewhere ? I'm
As Paul correctly pointed out, it is # to drop the tx
But, I'm wondering where you had got the idea it was 99 again,
You are not the first to have that assumption. Did you read this somewhere ? I'm
|
By
Mike KB8JNM
·
#2299
·
|
|
Re: DMR Bridge not "un-keying" problem
You should have an unkey command by default I believe its #
You should have an unkey command by default I believe its #
|
By
Paul Nannery KC2VRJ
·
#2298
·
|
|
DMR Bridge not "un-keying" problem
Hi,
I've set up about 10 DMR to Allstar bridges. This may be more of an Allstar issue than DVSwitch. Anyhow, when I key with *99 on the phone portal (or IAX client) it works great ... audio comes
Hi,
I've set up about 10 DMR to Allstar bridges. This may be more of an Allstar issue than DVSwitch. Anyhow, when I key with *99 on the phone portal (or IAX client) it works great ... audio comes
|
By
steve@...
·
#2297
·
|
|
Re: 1999 name on ASL-DMR bridge
You can add 1999 to allmon private nodes file.
Steve
You can add 1999 to allmon private nodes file.
Steve
|
By
Steve N4IRS
·
#2296
·
|
|
1999 name on ASL-DMR bridge
Afternoon all,
After the install of the ASL-DMR bridge where do I name 1999 to what it is,
for when it shows up in allmon2
Thank you for reading.
Joe G7kdz
Afternoon all,
After the install of the ASL-DMR bridge where do I name 1999 to what it is,
for when it shows up in allmon2
Thank you for reading.
Joe G7kdz
|
By
Joe Condron
·
#2295
·
|
|
Re: Analog to DMR - almost there!
#brandmeister
Dan,
I believe it has been said,
If you have issues with the server,
Use any other one that works well for you.
So , it's worth a try if you are having issues.
But re-check periodically as things
Dan,
I believe it has been said,
If you have issues with the server,
Use any other one that works well for you.
So , it's worth a try if you are having issues.
But re-check periodically as things
|
By
Mike KB8JNM
·
#2294
·
|
|
Re: Analog to DMR - almost there!
#brandmeister
I was able to finish the config after fuddling with a few more things - works well. Will do further testing which should help with ensuring I have a good grasp of the config.
Too bad our one and
I was able to finish the config after fuddling with a few more things - works well. Will do further testing which should help with ensuring I have a good grasp of the config.
Too bad our one and
|
By
Dan Keizer
·
#2293
·
|
|
Re: Analog to DMR - almost there!
#brandmeister
FACEPALM!
yup - something simple.
thanks - did not realize that.
onwards ho!
73, Dan ve4drk
FACEPALM!
yup - something simple.
thanks - did not realize that.
onwards ho!
73, Dan ve4drk
|
By
Dan Keizer
·
#2292
·
|
|
Re: Analog to DMR - almost there!
#brandmeister
Password=passw0rd
...mike/kb8jnm
Password=passw0rd
...mike/kb8jnm
|
By
Mike KB8JNM
·
#2291
·
|
|
Re: Analog to DMR - almost there!
#brandmeister
Thanks for the help. I've pretty much followed the instructions as far as I can tell.
I have specified the dmr id with the 2 digit extension has recommended. I've specified my brandmeister password
Thanks for the help. I've pretty much followed the instructions as far as I can tell.
I have specified the dmr id with the 2 digit extension has recommended. I've specified my brandmeister password
|
By
Dan Keizer
·
#2290
·
|