|
Re: Multiple private nodes connected to different talkgroups
systemctl enable analog_bridge enables the systemd unit analog_bridge.service in /lib/systemd/system. It is a test file and can be copied / edited.
It's job is the setup the environment for
systemctl enable analog_bridge enables the systemd unit analog_bridge.service in /lib/systemd/system. It is a test file and can be copied / edited.
It's job is the setup the environment for
|
By
Steve N4IRS
·
#2480
·
|
|
Re: Multiple private nodes connected to different talkgroups
very much so, thanks Steve.
Next question, what will these statements look like?
systemctl enable analog_bridge
systemctl start analog_bridge
because if you copy contents the program has the same
very much so, thanks Steve.
Next question, what will these statements look like?
systemctl enable analog_bridge
systemctl start analog_bridge
because if you copy contents the program has the same
|
By
Russell, KV4S
·
#2479
·
|
|
Re: Multiple private nodes connected to different talkgroups
Russell,
As per usual there is more then one way to do this. He is a simple one:
Create 4 subdirectories:
mkdir MMDVM_Bridge_TG_1234
mkdir MMDVM_Bridge_TG_9876
mkdir
Russell,
As per usual there is more then one way to do this. He is a simple one:
Create 4 subdirectories:
mkdir MMDVM_Bridge_TG_1234
mkdir MMDVM_Bridge_TG_9876
mkdir
|
By
Steve N4IRS
·
#2478
·
|
|
Re: ASL to DMR Bridge...changing talkgroups
is it possible to make this work with Allmon2 vs DTMF?
is it possible to make this work with Allmon2 vs DTMF?
|
By
Russell, KV4S
·
#2477
·
|
|
Multiple private nodes connected to different talkgroups
I don't have a lot of experience with private nodes but I've been working on a personal hub that is working fine with DVSwitch.
What I envision is having multiple instances of the DVSwitch
I don't have a lot of experience with private nodes but I've been working on a personal hub that is working fine with DVSwitch.
What I envision is having multiple instances of the DVSwitch
|
By
Russell, KV4S
·
#2476
·
|
|
Re: ASL to DMR Bridge...changing talkgroups
Neil,
The purpose of this list it to exchange information. Moving information exchange off list defeats that purpose.
Steve N4IRS
On 11/14/2018 11:08 AM, Neil k8it
Neil,
The purpose of this list it to exchange information. Moving information exchange off list defeats that purpose.
Steve N4IRS
On 11/14/2018 11:08 AM, Neil k8it
|
By
Steve N4IRS
·
#2475
·
|
|
Re: ASL to DMR Bridge...changing talkgroups
Could you please send me off list your python program and your modifying extensions . Conf. Thank you
73 Neil k8it
K8it@...
Could you please send me off list your python program and your modifying extensions . Conf. Thank you
73 Neil k8it
K8it@...
|
By
Neil k8it
·
#2474
·
|
|
Re: ASL to DMR Bridge...changing talkgroups
I didn't get Mike Z's code working out of the box and haven't had time to troubleshoot his yet. My setup allows you to enter *8711 and then the talkgroup number you want to connect to. the
I didn't get Mike Z's code working out of the box and haven't had time to troubleshoot his yet. My setup allows you to enter *8711 and then the talkgroup number you want to connect to. the
|
By
Michael Weaver - AC2VK
·
#2473
·
|
|
Re: ASL to DMR Bridge...changing talkgroups
I don't know if you were directing this to me Mike/KB8JNM or not
Your message is to the dvswitch main group @ goups.io
---
Ports do not have to be 'any certain port number' except:
I don't know if you were directing this to me Mike/KB8JNM or not
Your message is to the dvswitch main group @ goups.io
---
Ports do not have to be 'any certain port number' except:
|
By
Mike KB8JNM
·
#2472
·
|
|
Re: ASL to DMR Bridge...changing talkgroups
hi Mike, i just wanted to confirm that the port 31000 is in reference to fromDMRPort, so i should change the script to 31100 correct? Below is from my ini.
[AMBE_AUDIO]
server = 127.0.0.1
hi Mike, i just wanted to confirm that the port 31000 is in reference to fromDMRPort, so i should change the script to 31100 correct? Below is from my ini.
[AMBE_AUDIO]
server = 127.0.0.1
|
By
Gregory Heinrichs
·
#2471
·
|
|
Re: ASL to DMR Bridge...changing talkgroups
hi Mike, i just wanted to confirm that the port 31000 is in reference to fromDMRPort, so i should change the script to 31100 correct? Below is from my ini.
[AMBE_AUDIO]
server = 127.0.0.1
hi Mike, i just wanted to confirm that the port 31000 is in reference to fromDMRPort, so i should change the script to 31100 correct? Below is from my ini.
[AMBE_AUDIO]
server = 127.0.0.1
|
By
Gregory Heinrichs
·
#2470
·
|
|
Re: Bridging a P25Reflector and a YSFReflector?
Thanks for the replies. I'll give MMDVM_Bridge a go and see if I can get it working with my setup. I'll checkout MMDVM_CM too.
Thanks
Mike
Thanks for the replies. I'll give MMDVM_Bridge a go and see if I can get it working with my setup. I'll checkout MMDVM_CM too.
Thanks
Mike
|
By
Mike, KI0IK
·
#2469
·
|
|
Re: DMR -> P25 issue
Andy,
Thanks for the clarification.
Steve N4IRS
On 11/11/18 5:38 AM, andrew144500@... wrote:
Andy,
Thanks for the clarification.
Steve N4IRS
On 11/11/18 5:38 AM, andrew144500@... wrote:
|
By
Steve N4IRS
·
#2468
·
|
|
Re: DMR -> P25 issue
So,
here is a little more information about what is/was going on.
On October 4 a change to MMDVMHost was pushed to github. The change effected P25.
So,
here is a little more information about what is/was going on.
On October 4 a change to MMDVMHost was pushed to github. The change effected P25.
|
By
andrew (callsign)
·
#2467
·
|
|
Re: Bridging a P25Reflector and a YSFReflector?
That is intended to be used on a hotspot or repeater.
For reflector to reflector, MMDVM_Bridge will do that quite simply. No transcode required.
Steve N4IRS
Sent via smoke signal (AT&T)
That is intended to be used on a hotspot or repeater.
For reflector to reflector, MMDVM_Bridge will do that quite simply. No transcode required.
Steve N4IRS
Sent via smoke signal (AT&T)
|
By
Steve N4IRS
·
#2466
·
|
|
Re: Bridging a P25Reflector and a YSFReflector?
there's a ysf wide to p25 bridge made by Andy iin Chile. Juribeparada. I have never tried that one. https://github.com/juribeparada/MMDVM_CM
there's a ysf wide to p25 bridge made by Andy iin Chile. Juribeparada. I have never tried that one. https://github.com/juribeparada/MMDVM_CM
|
By
Alec-N1AJW
·
#2465
·
|
|
Re: DMR -> P25 issue
So,
here is a little more information about what is/was going on.
On October 4 a change to MMDVMHost was pushed to github. The change effected P25.
So,
here is a little more information about what is/was going on.
On October 4 a change to MMDVMHost was pushed to github. The change effected P25.
|
By
Steve N4IRS
·
#2464
·
|
|
Re: DMR -> P25 issue
FYI.
This issue is resolved now after last night Pi Star update.
73' va3czk
FYI.
This issue is resolved now after last night Pi Star update.
73' va3czk
|
By
va3czk@...
·
#2463
·
|
|
Re: DMR -> P25 issue
Sorry guys. Didn't look at the recipient's...
Sent from my Verizon, Samsung Galaxy smartphone
Sorry guys. Didn't look at the recipient's...
Sent from my Verizon, Samsung Galaxy smartphone
|
By
David Griffith NZ6D
·
#2462
·
|
|
Re: DMR -> P25 issue
PS.. I am in Albuquerque New Mexico now so I don't really have access. Helping my Dad....
Sent from my Verizon, Samsung Galaxy smartphone
PS.. I am in Albuquerque New Mexico now so I don't really have access. Helping my Dad....
Sent from my Verizon, Samsung Galaxy smartphone
|
By
David Griffith NZ6D
·
#2461
·
|