|
Re: Trying to setup a basic 'Parrot', however hb_confbridge.py is not matching the RADIO_ID
Mathew,
Good point. I did it that way to obfuscate the origin of the traffic to an upstream Network.
Let's not just change it, but make it a configurable option to either masquerade or preserve the
Mathew,
Good point. I did it that way to obfuscate the origin of the traffic to an upstream Network.
Let's not just change it, but make it a configurable option to either masquerade or preserve the
|
By
Cort N0MJS <n0mjs@...>
·
#364
·
|
|
Re: Trying to setup a basic 'Parrot', however hb_confbridge.py is not matching the RADIO_ID
Hi Both,
Richard - Thanks for sending your diagram, it helps to see things 'visually'
Cort - Thanks for the heads up. Now that you've mentioned it, its obvious that MMDVM clients could connect
Hi Both,
Richard - Thanks for sending your diagram, it helps to see things 'visually'
Cort - Thanks for the heads up. Now that you've mentioned it, its obvious that MMDVM clients could connect
|
By
Matthew 2E0SIP
·
#363
·
|
|
Re: Trying to setup a basic 'Parrot', however hb_confbridge.py is not matching the RADIO_ID
Your configuration does not require running hblink.py at all. You only need parrot and hb_confbridge.py. I don’t have the time right now to write it all up, but as you’re modifying code and going
Your configuration does not require running hblink.py at all. You only need parrot and hb_confbridge.py. I don’t have the time right now to write it all up, but as you’re modifying code and going
|
By
Cort N0MJS <n0mjs@...>
·
#362
·
|
|
Re: Trying to setup a basic 'Parrot', however hb_confbridge.py is not matching the RADIO_ID
I switched to the HB_Bridge branch and it performed a little better, in that hb_confbridge was relaying the frames to the parrot, however the parrot was still ignoring them.
I did some digging and
I switched to the HB_Bridge branch and it performed a little better, in that hb_confbridge was relaying the frames to the parrot, however the parrot was still ignoring them.
I did some digging and
|
By
Matthew 2E0SIP
·
#361
·
|
|
Trying to setup a basic 'Parrot', however hb_confbridge.py is not matching the RADIO_ID
Hi all,
I'm trying to setup a basic parrot, which consists of the following-
hb_parrot (Master) - Provides Parrot Service
hblink (Master) - Allows clients to connect to the service
hb_confbridge
Hi all,
I'm trying to setup a basic parrot, which consists of the following-
hb_parrot (Master) - Provides Parrot Service
hblink (Master) - Allows clients to connect to the service
hb_confbridge
|
By
Matthew 2E0SIP
·
#360
·
|
|
Re: DMRlink <-> HBlink communication
Mike,
Can I ask about the template file. Back in time chatting to Cort, we discussed DMRlink having a template based system so adding more repeater manufacturers would be a simpler task, identify the
Mike,
Can I ask about the template file. Back in time chatting to Cort, we discussed DMRlink having a template based system so adding more repeater manufacturers would be a simpler task, identify the
|
By
Peter M0NWI
·
#359
·
|
|
Re: DMRlink <-> HBlink communication
All appears to be working, THANK YOU very much for all your help. I have been looking for this functionality for a long time. It beats putting a repeater in your car when you travel.
--
Vance W6SS
All appears to be working, THANK YOU very much for all your help. I have been looking for this functionality for a long time. It beats putting a repeater in your car when you travel.
--
Vance W6SS
|
By
Vance, W6SS
·
#358
·
|
|
Re: DMRlink <-> HBlink communication
IPSC_Bridge:
-rw-r--r-- 1 root root 6543 Jul 13 13:05 dmrlink.cfg
-rwxr-xr-x 1 root root 52232 Jul 13 10:02 dmrlink.py
drwxr-xr-x 2 root root 4096 Jul 13 13:05 ipsc
-rw-r--r-- 1 root root
IPSC_Bridge:
-rw-r--r-- 1 root root 6543 Jul 13 13:05 dmrlink.cfg
-rwxr-xr-x 1 root root 52232 Jul 13 10:02 dmrlink.py
drwxr-xr-x 2 root root 4096 Jul 13 13:05 ipsc
-rw-r--r-- 1 root root
|
By
Steve N4IRS
·
#357
·
Edited
|
|
Re: DMRlink <-> HBlink communication
The template file is a requirement for creating IPSC frames from the bridge.
The template file is a requirement for creating IPSC frames from the bridge.
|
By
Mike Zingman - N4IRR
·
#356
·
|
|
Re: DMRlink <-> HBlink communication
Do I need the template.py file? I can now transmit to the C-Bridge but not getting any audio.
Probably what I need is a listing of files for /opt/dmrlink/bridge and /opt/HBlink
--
Vance W6SS
Do I need the template.py file? I can now transmit to the C-Bridge but not getting any audio.
Probably what I need is a listing of files for /opt/dmrlink/bridge and /opt/HBlink
--
Vance W6SS
|
By
Vance, W6SS
·
#355
·
|
|
Re: DMRlink <-> HBlink communication
In the short term I will make this a fatal error. In the longer term, I will convert over to use the static values Cort was so kind to convert for me.
HB will not have the same problem since it does
In the short term I will make this a fatal error. In the longer term, I will convert over to use the static values Cort was so kind to convert for me.
HB will not have the same problem since it does
|
By
Mike Zingman - N4IRR
·
#354
·
|
|
Re: DMRlink <-> HBlink communication
It goes in the same directory as IPSC_Bridge.py
Mike called it (what a surprise)
Without template.bin
INFO 2017-07-13 13:17:33,862 DMRlink 'IPSC_Bridge.py' (c) 2015 N0MJS &
It goes in the same directory as IPSC_Bridge.py
Mike called it (what a surprise)
Without template.bin
INFO 2017-07-13 13:17:33,862 DMRlink 'IPSC_Bridge.py' (c) 2015 N0MJS &
|
By
Steve N4IRS
·
#353
·
|
|
Re: DMRlink <-> HBlink communication
It goes directly in the dmrlink folder.
It goes directly in the dmrlink folder.
|
By
Corey Dean N3FE <n3fe@...>
·
#352
·
|
|
Re: DMRlink <-> HBlink communication
I found template.bin, does it go in the /opt/dmrlink/bridge directory?
--
Vance W6SS
I found template.bin, does it go in the /opt/dmrlink/bridge directory?
--
Vance W6SS
|
By
Vance, W6SS
·
#351
·
|
|
Re: DMRlink <-> HBlink communication
wget https://github.com/n0mjs710/DMRlink/raw/IPSC_Bridge/template.bin
wget https://github.com/n0mjs710/DMRlink/raw/IPSC_Bridge/template.bin
|
By
Steve N4IRS
·
#350
·
|
|
Re: DMRlink <-> HBlink communication
I do not have template.bin, where do I find it?
--
Vance W6SS
I do not have template.bin, where do I find it?
--
Vance W6SS
|
By
Vance, W6SS
·
#349
·
|
|
Re: Beta testing of DummyRepeater for ASL
Coming to a screen near you
I have done some work on Analog_Bridge and DummyRepeater (AB and DR) that allow the passing of limited metadata between the two networks.
On the AB side DMR IDs are
Coming to a screen near you
I have done some work on Analog_Bridge and DummyRepeater (AB and DR) that allow the passing of limited metadata between the two networks.
On the AB side DMR IDs are
|
By
Mike Zingman - N4IRR
·
#348
·
|
|
Re: DMRlink <-> HBlink communication
Than you, not having the rules files make it much easier. Will wait what to find out from your testing.
--
Vance W6SS
Than you, not having the rules files make it much easier. Will wait what to find out from your testing.
--
Vance W6SS
|
By
Vance, W6SS
·
#347
·
|
|
Re: DMRlink <-> HBlink communication
Just to make sure, you *do* have template.bin in the dmrlink directory, right?
Can you look back at the start of your log for any error message like:
Can not open template.bin file
Mike
Just to make sure, you *do* have template.bin in the dmrlink directory, right?
Can you look back at the start of your log for any error message like:
Can not open template.bin file
Mike
|
By
Mike Zingman - N4IRR
·
#346
·
|
|
Re: DMRlink <-> HBlink communication
Vance,
I am chasing it now. Just to be clear:
hb_routing_rules are not used by basic HB to IPSC. Just HB_Bridge and IPSC_Bridge
It looks like this:
MMDVM <---> HB_Bridge <--->
Vance,
I am chasing it now. Just to be clear:
hb_routing_rules are not used by basic HB to IPSC. Just HB_Bridge and IPSC_Bridge
It looks like this:
MMDVM <---> HB_Bridge <--->
|
By
Steve N4IRS
·
#345
·
|