|
Re: Do we need more subgroups.
#poll
OK, Without ASL below are the base permutations. From that let's eliminate some obvious "I doubt anyone would do this"
Based on Russells comment that most bridges involve DMR
DMR <-> D-Stsr
DMR <->
OK, Without ASL below are the base permutations. From that let's eliminate some obvious "I doubt anyone would do this"
Based on Russells comment that most bridges involve DMR
DMR <-> D-Stsr
DMR <->
|
By
Steve N4IRS
·
#3636
·
|
|
Re: Do we need more subgroups.
#poll
I agree assumptions usually get broken fast.
I'm strictly making that comment from what I've seen on this email list and what I've been asked to build for others that reach out to me. AllStar <> DMR
I agree assumptions usually get broken fast.
I'm strictly making that comment from what I've seen on this email list and what I've been asked to build for others that reach out to me. AllStar <> DMR
|
By
Russell, KV4S
·
#3635
·
|
|
Re: Do we need more subgroups.
#poll
I don't agree with the assumption that DMR is involved in every bridge. Does a bridge have a destination?
I don't agree with the assumption that DMR is involved in every bridge. Does a bridge have a destination?
|
By
Steve N4IRS
·
#3634
·
|
|
Re: Do we need more subgroups.
#poll
That sounds like a reasonable way to handle it to me.
That sounds like a reasonable way to handle it to me.
|
By
Jim Gifford - K9AGR
·
#3633
·
|
|
Re: Do we need more subgroups.
#poll
I think that has it as far as I can see except as you mentioned ASL
I think that has it as far as I can see except as you mentioned ASL
|
By
Mike KB8JNM
·
#3632
·
|
|
Re: Do we need more subgroups.
#poll
without making it "complicated". The destination would be the topic name.
I think we can assume DMR is the core mode. I don't think I've seen a bridge system someone has worked on that hasn't inluded
without making it "complicated". The destination would be the topic name.
I think we can assume DMR is the core mode. I don't think I've seen a bridge system someone has worked on that hasn't inluded
|
By
Russell, KV4S
·
#3631
·
|
|
Re: Do we need more subgroups.
#poll
The (N - 1) accounted for the fact that bridges work in 2 directions. Otherwise it would be N*N / 2.
The (N - 1) accounted for the fact that bridges work in 2 directions. Otherwise it would be N*N / 2.
|
By
Jim Gifford - K9AGR
·
#3630
·
|
|
Re: Do we need more subgroups.
#poll
Did I miss any?
D-Star <-> DMR
D-Star <-> YSF
D-Star <-> NXDN
D-Star <-> P25
DMR <-> YSF
DMR <-> NXDN
DMR <-> P25
YSF <-> NXDN
YSF <-> P25
NXDN
Did I miss any?
D-Star <-> DMR
D-Star <-> YSF
D-Star <-> NXDN
D-Star <-> P25
DMR <-> YSF
DMR <-> NXDN
DMR <-> P25
YSF <-> NXDN
YSF <-> P25
NXDN
|
By
Steve N4IRS
·
#3629
·
|
|
Re: Do we need more subgroups.
#poll
I would understand that it is a number of subgroups, but I don't think as many as you state because you are counting some twice.
DMR <> YSF would include YSF <> DMR
But in any case, a BRIDGING
I would understand that it is a number of subgroups, but I don't think as many as you state because you are counting some twice.
DMR <> YSF would include YSF <> DMR
But in any case, a BRIDGING
|
By
Mike KB8JNM
·
#3628
·
|
|
Re: Do we need more subgroups.
#poll
A subgroup per bridge pair could quickly get out of hand. For N modes, you'd end up with (N * (N-1)) / 2 subgroups.
For 5 modes, that's 10 bridging subgroups.
For 7 modes, you're up to 21 bridging
A subgroup per bridge pair could quickly get out of hand. For N modes, you'd end up with (N * (N-1)) / 2 subgroups.
For 5 modes, that's 10 bridging subgroups.
For 7 modes, you're up to 21 bridging
|
By
Jim Gifford - K9AGR
·
#3627
·
|
|
Re: Do we need more subgroups.
#poll
I would agree with Mike (JNM).
I would agree with Mike (JNM).
|
By
Lito - WI6Y
·
#3626
·
|
|
Re: Do we need more subgroups.
#poll
I would suggest
A separate bridge subgroup for the pair <>
I would suggest
A separate bridge subgroup for the pair <>
|
By
Mike KB8JNM
·
#3625
·
|
|
Re: Do we need more subgroups.
#poll
So the question becomes, I want to build a DMR <-> D-Star bridge, what subgroup do I use? DMR? D-Star?
Steve
So the question becomes, I want to build a DMR <-> D-Star bridge, what subgroup do I use? DMR? D-Star?
Steve
|
By
Steve N4IRS
·
#3624
·
|
|
Re: Problem Description: No Audio @ P25 radio, No Audio DMR from Bridge P25 <<-->> DMR
I do not see a transmission from P25, so I'll address DMR -> P25
We see the TX in the MB log here:
M: 2019-03-13 14:27:10.248 DMR Slot 2, received network voice header from W0RAY to TG
I do not see a transmission from P25, so I'll address DMR -> P25
We see the TX in the MB log here:
M: 2019-03-13 14:27:10.248 DMR Slot 2, received network voice header from W0RAY to TG
|
By
Steve N4IRS
·
#3623
·
|
|
Re: YSFReflector <> DMR
#dmrlink
I ended up having a separate issue going from DMR to YSF. I had someone message me privately that had the same issue and went to YSF2DMR. I went this route and it worked good but would be more than
I ended up having a separate issue going from DMR to YSF. I had someone message me privately that had the same issue and went to YSF2DMR. I went this route and it worked good but would be more than
|
By
nick@...
·
#3622
·
|
|
Re: Problem Description: No Audio @ P25 radio, No Audio DMR from Bridge P25 <<-->> DMR
The attached file is the correct one with the same name. Unfortunately I mistakenly included a file from an earlier run in the former .ZIP.
RayH w0ray
The attached file is the correct one with the same name. Unfortunately I mistakenly included a file from an earlier run in the former .ZIP.
RayH w0ray
|
By
Ray Harden
·
#3621
·
|
|
Re: YSFReflector <> DMR
#dmrlink
Ethan,
Sorry I did not see this before. (way too much inbound e-mail)
There is a bug in MMDVM_Bridge and YSF one of the symptoms is Mikes call. It will be fixed.
Steve N4IRS
Ethan,
Sorry I did not see this before. (way too much inbound e-mail)
There is a bug in MMDVM_Bridge and YSF one of the symptoms is Mikes call. It will be fixed.
Steve N4IRS
|
By
Steve N4IRS
·
#3620
·
|
|
Re: YSFReflector <> DMR
#dmrlink
Hello Nick,
You may have seen my topic, which was posted a day before yours. I am doing the same thing, and was at the same point you were. I could not get DMR Callsigns to show up on YSF Radios. I
Hello Nick,
You may have seen my topic, which was posted a day before yours. I am doing the same thing, and was at the same point you were. I could not get DMR Callsigns to show up on YSF Radios. I
|
By
Ethan - KE7DUX
·
#3619
·
|
|
Re: Problem Description: No Audio @ P25 radio, No Audio DMR from Bridge P25 <<-->> DMR
I don't think the AB logLevel is set at 2. I don't see a single transmission from P25. If the AB logs do not look like this don't send the files until they do.
I: 2019-03-13
I don't think the AB logLevel is set at 2. I don't see a single transmission from P25. If the AB logs do not look like this don't send the files until they do.
I: 2019-03-13
|
By
Steve N4IRS
·
#3618
·
|
|
Re: Problem Description: No Audio @ P25 radio, No Audio DMR from Bridge P25 <<-->> DMR
A_B logs now have logLevel = 2
RayH w0ray
A_B logs now have logLevel = 2
RayH w0ray
|
By
Ray Harden
·
#3617
·
|