DVSwitch is a set of tools and programs related to provisioning and operating Amateur Radio digital voice networks.
Purpose
The purpose of DVSwitch is as follows:
1) Allows “local” networking during an outage of the regional national/international network server. 2) Allows a local network operator to “blend” upstream feeds from different Networks (capital N on purpose). These Networks can’t get their act together and learn how to play nice with each other (everyone guilty as far as we are concerned). They may not like people doing this, but the solution is to grow up and work with each other, and not keep trying to force people to take sides. 3) Allows local segregation of localized traffic with more flexibility. 4) Allows experimentation with linking and how it’s done (part 97 specifies experimentation and advancement of the radio art are a core part of amateur radio).
Mission Statement/Position
Our stated position is:
WHEREAS the Networks continue to be largely islands and are not working together to create a unified network of Networks. WHEREAS no firm reason has been given by any of the Networks why a *competent* local network operator cannot make this work effectively.
(US ONLY) WHEREAS47 CFR 97 (Amateur Radio Service) specifies that a core component of amateur radio is experimentation and advancement of the radio art [97.1(b)].
BE IT RESOLVED the core group of US amateur radio operators and experimenters organized around the DVSwitch project, and in the spirit of USA 47 CFR 97 and its intentions, support the *responsible* and *thoughtful* use of digital voice networking tools to create localized networks that will interconnect to the national/international Networks, and will support users of its tools in order to do this in the most effective and sustainable way possible.
As a suggestion, the only files you will need are the configuration files for the programs. Basically, just copy over the .ini files (and just the .ini files) from your old instance to another
As a suggestion, the only files you will need are the configuration files for the programs. Basically, just copy over the .ini files (and just the .ini files) from your old instance to another
Thanks Steve and Mike
I'm going to wipe out Dv_Switch and all of the files completely from the new PS and try again
I've made the directories and they exist in the files,on the new VPS running is the
Thanks Steve and Mike
I'm going to wipe out Dv_Switch and all of the files completely from the new PS and try again
I've made the directories and they exist in the files,on the new VPS running is the
If you can't run or don't have a simple command like mkdir, your OS is buggered up beyond recognition. It's one of the core utilities, and probably one of the most common commands used beside ls. I'd
If you can't run or don't have a simple command like mkdir, your OS is buggered up beyond recognition. It's one of the core utilities, and probably one of the most common commands used beside ls. I'd
It looks to me that you're having procedural problems, and not issues with the programs themselves. You've got folders missing apparently. Here's the important part of what you've sent over:
chown:
It looks to me that you're having procedural problems, and not issues with the programs themselves. You've got folders missing apparently. Here's the important part of what you've sent over:
chown:
Show me YSFReflector.ini & your YSFReflector.sh contents
and does" /var/run/YSFReflector.pid " exist ?
what is returned when you run YSFReflector restart ?
Show me YSFReflector.ini & your YSFReflector.sh contents
and does" /var/run/YSFReflector.pid " exist ?
what is returned when you run YSFReflector restart ?
Mike
I tried to reload the YSFReflecor and can't get it to reinstall over whats already there.
Analog_Bridge NXDNClients P25Clients Quantar_Bridge YSFParrot
DMRGateway NXDNGateway P25Gateway
Mike
I tried to reload the YSFReflecor and can't get it to reinstall over whats already there.
Analog_Bridge NXDNClients P25Clients Quantar_Bridge YSFParrot
DMRGateway NXDNGateway P25Gateway
Hmmm
my DMRIds.dat is in /root/YSF2DMR/DMRIds.dat
my YSF2DMR.ini has:
[DMR Id Lookup]
File=/root/YSF2DMR/DMRIds.dat
Time=24
All DMR traffic coming through to the reflector from YSF2DMR only
Hmmm
my DMRIds.dat is in /root/YSF2DMR/DMRIds.dat
my YSF2DMR.ini has:
[DMR Id Lookup]
File=/root/YSF2DMR/DMRIds.dat
Time=24
All DMR traffic coming through to the reflector from YSF2DMR only
Re-check permissions and ownership of all ysf ref files . mainly a config file. But look at all.
I'm guessing just the ysf reflector is the only non-working from what you said. So, did
Re-check permissions and ownership of all ysf ref files . mainly a config file. But look at all.
I'm guessing just the ysf reflector is the only non-working from what you said. So, did
Mike
No just the files for dvswitch and Apache2 server, I downloaded the dvswitch build that steve had posted and copied to the new build.
It is identical as the DO server unless there is some files
Mike
No just the files for dvswitch and Apache2 server, I downloaded the dvswitch build that steve had posted and copied to the new build.
It is identical as the DO server unless there is some files