|
Re: MMDVM_Bridge and HBLink3 missing CALL END
OK ,I have dump
M: 2019-06-27 08:53:17.996 YSF, received network end of transmission, 3.9 seconds, 0% packet loss, BER: 0.0%
M: 2019-06-27 08:53:18.001 DMR, TX state = OFF, DMR frame count was 62
OK ,I have dump
M: 2019-06-27 08:53:17.996 YSF, received network end of transmission, 3.9 seconds, 0% packet loss, BER: 0.0%
M: 2019-06-27 08:53:18.001 DMR, TX state = OFF, DMR frame count was 62
|
By
SP2ONG Waldek
·
#4337
·
|
|
Re: MMDVM_Bridge and HBLink3 missing CALL END
Steve
I have turn on debug in
[DMR Network]
debug=1
and
[System Fusion Network]
debug=1
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error,
Steve
I have turn on debug in
[DMR Network]
debug=1
and
[System Fusion Network]
debug=1
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error,
|
By
SP2ONG Waldek
·
#4336
·
|
|
Re: MMDVM_Bridge and HBLink3 missing CALL END
Please turn on debug in MMDVM_Bridge and capture the call end.
Steve N4IRS
Please turn on debug in MMDVM_Bridge and capture the call end.
Steve N4IRS
|
By
Steve N4IRS
·
#4335
·
|
|
Re: MMDVM_Bridge and HBLink3 missing CALL END
I have seen that the problem missing CALL END only appear from time to time
I have seen that the problem missing CALL END only appear from time to time
|
By
SP2ONG Waldek
·
#4334
·
|
|
Re: Raspberry Pi 4
Meh.... The specs aren't too much of a significant increase to justify purchasing a new SBC. The DVSwitch suite performs well, even on lesser boards and servers.
If I were to be doing some digital
Meh.... The specs aren't too much of a significant increase to justify purchasing a new SBC. The DVSwitch suite performs well, even on lesser boards and servers.
If I were to be doing some digital
|
By
Steve KC1AWV
·
#4333
·
|
|
Raspberry Pi 4
Looking forward to testing the Raspberry Pi 4 in the next week on one of my repeaters. Has anyone else considering getting one of these for testing ?
Mike AE4ML
Looking forward to testing the Raspberry Pi 4 in the next week on one of my repeaters. Has anyone else considering getting one of these for testing ?
Mike AE4ML
|
By
Mike AE4ML
·
#4332
·
|
|
Re: MMDVM_Bridge and HBLink3 missing CALL END
Sorry in a previous email I forgot to add 2 hours to a few lines form MMDVM_Bridge. The MMDVM_Bridge in the log use my local time -2 hours, the HBLink3 use local time
M: 2019-06-26 11:27:08.027 YSF,
Sorry in a previous email I forgot to add 2 hours to a few lines form MMDVM_Bridge. The MMDVM_Bridge in the log use my local time -2 hours, the HBLink3 use local time
M: 2019-06-26 11:27:08.027 YSF,
|
By
SP2ONG Waldek
·
#4331
·
|
|
MMDVM_Bridge and HBLink3 missing CALL END
I have use MMDVM_Bridge version:
2019-06-26 08:33:55.010 MMDVM_Bridge-20180423 is starting
M: 2019-06-26 08:33:55.010 Built 10:47:32 Jun 24 2019 (GitID #30648ec)
I have setup link to YSF Reflector and
I have use MMDVM_Bridge version:
2019-06-26 08:33:55.010 MMDVM_Bridge-20180423 is starting
M: 2019-06-26 08:33:55.010 Built 10:47:32 Jun 24 2019 (GitID #30648ec)
I have setup link to YSF Reflector and
|
By
SP2ONG Waldek
·
#4330
·
|
|
Re: setting up MMDVM_Bridge and Analog_Bridge
#analog_bridge
#mmdvm_bridge
Hi Steve,
On my XLX server I have the following all able to run without errors:
Ambed
ircddbgateway
MMDVM_Bridge
I have a DVstick-33 with uses AMBE3003 plugged in my server and transcoding XRF DSTAR >
Hi Steve,
On my XLX server I have the following all able to run without errors:
Ambed
ircddbgateway
MMDVM_Bridge
I have a DVstick-33 with uses AMBE3003 plugged in my server and transcoding XRF DSTAR >
|
By
Node750Tt
·
#4329
·
|
|
Re: setting up MMDVM_Bridge and Analog_Bridge
#analog_bridge
#mmdvm_bridge
The DVStick-33 is compatible with AB right?
The DVStick-33 is compatible with AB right?
|
By
Dexter Harroo
·
#4328
·
|
|
Re: HBlink rules.py
I think your setup is not possible. You have 3 times 'MASTER' - all in slot2 - as a peer. But only one connection at the same time is possible on each slot on the same peer. With the XLX the same
I think your setup is not possible. You have 3 times 'MASTER' - all in slot2 - as a peer. But only one connection at the same time is possible on each slot on the same peer. With the XLX the same
|
By
Heiko DL1BZ
·
#4327
·
|
|
Re: 1 Way Audio (XLX DMR to ASL)
FWIW, it looks like a new binary of MMDVM_bridge was committed yesterday. I downloaded the new binary and it seems like the 1 way problem has been fixed. Thanks!
FWIW, it looks like a new binary of MMDVM_bridge was committed yesterday. I downloaded the new binary and it seems like the 1 way problem has been fixed. Thanks!
|
By
N0KEG
·
#4326
·
|
|
Re: YSF -> DMR ID/Callsign Display
Just fixed the same problem here. The DMRIds.dat file that I had on the YSF reflector was some weird semicolon delimited format, not sure where exactly it came from but I thought it was the one that
Just fixed the same problem here. The DMRIds.dat file that I had on the YSF reflector was some weird semicolon delimited format, not sure where exactly it came from but I thought it was the one that
|
By
N0KEG
·
#4325
·
|
|
Re: setting up MMDVM_Bridge and Analog_Bridge
#analog_bridge
#mmdvm_bridge
[GENERAL]
decoderFallBack = true ; Allow software AMBE decoding if a hardware decoder is not found
[GENERAL]
decoderFallBack = true ; Allow software AMBE decoding if a hardware decoder is not found
|
By
Steve N4IRS
·
#4324
·
|
|
Re: setting up MMDVM_Bridge and Analog_Bridge
#analog_bridge
#mmdvm_bridge
Hi Steve, How do i enable the internal vocoder
Do i have to modify Here?
Hi Steve, How do i enable the internal vocoder
Do i have to modify Here?
|
By
Dexter Harroo
·
#4323
·
|
|
Re: setting up MMDVM_Bridge and Analog_Bridge
#analog_bridge
#mmdvm_bridge
Dexter,
If you are referring to the ambed from XLX, it will not work. AB does not support that server. If you are using DMR you can use the internal vocoder in AB or the md380-emu.
Dexter,
If you are referring to the ambed from XLX, it will not work. AB does not support that server. If you are using DMR you can use the internal vocoder in AB or the md380-emu.
|
By
Steve N4IRS
·
#4322
·
|
|
Re: setting up MMDVM_Bridge and Analog_Bridge
#analog_bridge
#mmdvm_bridge
Hi Guys, having this issue when starting A_B,, we have AMBED server running and the devices plugged into the same box that is running AMBE server and the reflector, is there something in the settings
Hi Guys, having this issue when starting A_B,, we have AMBED server running and the devices plugged into the same box that is running AMBE server and the reflector, is there something in the settings
|
By
Dexter Harroo
·
#4321
·
|
|
Re: MMDVM_Bridge
As I know from our DMRplus-sysops in Germany, they say you need to set in the options-line all 2 TS, TG not used need to be setup by zero. You have 5 TGs for slot1 and 5 TGs for slot2 and the option
As I know from our DMRplus-sysops in Germany, they say you need to set in the options-line all 2 TS, TG not used need to be setup by zero. You have 5 TGs for slot1 and 5 TGs for slot2 and the option
|
By
Heiko DL1BZ
·
#4320
·
|
|
Re: OhioLink YSF to DMR bridge update
You will need to replace the Analog_Bridge executable with one from here. <https://github.com/DVSwitch/Analog_Bridge/tree/master/bin>
You will need to replace the Analog_Bridge executable with one from here. <https://github.com/DVSwitch/Analog_Bridge/tree/master/bin>
|
By
Steve N4IRS
·
#4319
·
|
|
Re: OhioLink YSF to DMR bridge update
Just the TG number
By
Steve N4IRS
·
#4318
·
|