DVSwitch is a set of tools and programs related to provisioning and operating Amateur Radio digital voice networks.
Purpose
The purpose of DVSwitch is as follows:
1) Allows “local” networking during an outage of the regional national/international network server. 2) Allows a local network operator to “blend” upstream feeds from different Networks (capital N on purpose). These Networks can’t get their act together and learn how to play nice with each other (everyone guilty as far as we are concerned). They may not like people doing this, but the solution is to grow up and work with each other, and not keep trying to force people to take sides. 3) Allows local segregation of localized traffic with more flexibility. 4) Allows experimentation with linking and how it’s done (part 97 specifies experimentation and advancement of the radio art are a core part of amateur radio).
Mission Statement/Position
Our stated position is:
WHEREAS the Networks continue to be largely islands and are not working together to create a unified network of Networks. WHEREAS no firm reason has been given by any of the Networks why a *competent* local network operator cannot make this work effectively.
(US ONLY) WHEREAS47 CFR 97 (Amateur Radio Service) specifies that a core component of amateur radio is experimentation and advancement of the radio art [97.1(b)].
BE IT RESOLVED the core group of US amateur radio operators and experimenters organized around the DVSwitch project, and in the spirit of USA 47 CFR 97 and its intentions, support the *responsible* and *thoughtful* use of digital voice networking tools to create localized networks that will interconnect to the national/international Networks, and will support users of its tools in order to do this in the most effective and sustainable way possible.
Hi Steve
I use the attached tuns.sh script to switch groups in Ananlog_Bridge. This script is a part of your tune.sh script.
Sometimes it happens that after using this script, the repeaterID
Hi Steve
I use the attached tuns.sh script to switch groups in Ananlog_Bridge. This script is a part of your tune.sh script.
Sometimes it happens that after using this script, the repeaterID
Please review this article in the wiki for DMRLink to Brandmeister.
https://dvswitch.groups.io/g/main/wiki/DMRlink-and-BrandMeister
Steve KC1AWV
--
Steve Miller
KC1AWV
Please review this article in the wiki for DMRLink to Brandmeister.
https://dvswitch.groups.io/g/main/wiki/DMRlink-and-BrandMeister
Steve KC1AWV
--
Steve Miller
KC1AWV
Ok i have got it talking to my Motorola master.
Now im trying to get Dmrlink to connect with brandmiester.
This is what I have for configuration.
[bm]
ENABLED: True
RADIO_ID: 311078
IP:
PORT:
Ok i have got it talking to my Motorola master.
Now im trying to get Dmrlink to connect with brandmiester.
This is what I have for configuration.
[bm]
ENABLED: True
RADIO_ID: 311078
IP:
PORT:
There is very little in the way of documentation on setting up parrot and it took me two weeks to figure out you have to run separate config files. I finally got it working on my master server and I
There is very little in the way of documentation on setting up parrot and it took me two weeks to figure out you have to run separate config files. I finally got it working on my master server and I
Steve,
I really like the potential of Ananlog_bridge.
I would like to launch an information service locale using the restored information in wav files.
On the ananlog we can use DTMF to start playing
Steve,
I really like the potential of Ananlog_bridge.
I would like to launch an information service locale using the restored information in wav files.
On the ananlog we can use DTMF to start playing
Ok when I have comment outt 57 - 60 now
M: 2019-07-07 16:06:42.939 PTT on
W: 2019-07-07 16:07:36.781 Received USRP packet of wrong size
D: 2019-07-07 16:07:36.802 cpu_time_used = 53863, minTxTime =
Ok when I have comment outt 57 - 60 now
M: 2019-07-07 16:06:42.939 PTT on
W: 2019-07-07 16:07:36.781 Received USRP packet of wrong size
D: 2019-07-07 16:07:36.802 cpu_time_used = 53863, minTxTime =
In lines 57 through 60 it looks like you are trying to assert a PTT. It is not needed, the sending of audio with the PTT flag on will assert PTT. Try commenting out 57 through 60.
In lines 57 through 60 it looks like you are trying to assert a PTT. It is not needed, the sending of audio with the PTT flag on will assert PTT. Try commenting out 57 through 60.
Hi Steve,
We use MB / AB with an attached script to play information emcom every hour, if the file info.wav exists in the directory. Generally everything works, but in the Analog_Bridge log I saw the
Hi Steve,
We use MB / AB with an attached script to play information emcom every hour, if the file info.wav exists in the directory. Generally everything works, but in the Analog_Bridge log I saw the
Hi Steve and all,
for completeness of information ( MMDVM_Bridge/DOC/DMRplus_startup_options.md ), the line Options= in DMR+ for startup also accepts the configuration for SLOT 2 in this
Hi Steve and all,
for completeness of information ( MMDVM_Bridge/DOC/DMRplus_startup_options.md ), the line Options= in DMR+ for startup also accepts the configuration for SLOT 2 in this
Thank you for the quick reply what would be the appropriate group to talk about this, DVswitch openbridge? just looking for a little direction on getting this running.
Thank you
Bob
KB6LED
Thank you for the quick reply what would be the appropriate group to talk about this, DVswitch openbridge? just looking for a little direction on getting this running.
Thank you
Bob
KB6LED
You should ask your question in the HBlink subgroup. That being said, you will need HB_Bridge and IPSC_Bridge from here. <https://github.com/n0mjs710/HBlink/tree/HB_Bridge> and here
You should ask your question in the HBlink subgroup. That being said, you will need HB_Bridge and IPSC_Bridge from here. <https://github.com/n0mjs710/HBlink/tree/HB_Bridge> and here