|
Re: Troubleshooting ThumbDV HW AMBE chip with Analog_Bridge
Hello Steve,
I'm happy to report that this resolved my issue and the audio quality issue is resolved! If I can make a recommendation, on page 16
Hello Steve,
I'm happy to report that this resolved my issue and the audio quality issue is resolved! If I can make a recommendation, on page 16
|
By
David Ranch
·
#4884
·
|
|
Re: Troubleshooting ThumbDV HW AMBE chip with Analog_Bridge
Hello Steve,
Thanks for the reply.
Yes.. I saw that post. This is currently being driven by a 5.1v @ 2.5A supply which should be good but I'll try others.
Ok,
Hello Steve,
Thanks for the reply.
Yes.. I saw that post. This is currently being driven by a 5.1v @ 2.5A supply which should be good but I'll try others.
Ok,
|
By
David Ranch
·
#4883
·
|
|
Re: Troubleshooting ThumbDV HW AMBE chip with Analog_Bridge
David,
There are typically 2 issues with the ThumbDV on a RPi:
1: Power, The ThumbDV is very sensitive to power drops See
David,
There are typically 2 issues with the ThumbDV on a RPi:
1: Power, The ThumbDV is very sensitive to power drops See
|
By
Steve N4IRS
·
#4882
·
|
|
Troubleshooting ThumbDV HW AMBE chip with Analog_Bridge
Hello Everyone,
I have a working DMR TG to Analog DVSwitch setup working here using the included "Project 25 IMBE Encoder/Decoder Fixed-Point implementation" SW emulation on an
Hello Everyone,
I have a working DMR TG to Analog DVSwitch setup working here using the included "Project 25 IMBE Encoder/Decoder Fixed-Point implementation" SW emulation on an
|
By
David Ranch
·
#4881
·
|
|
Re: Jackhammer Sound
I double checked the md-380.emu and then rebooted. After that, it worked again without jack hammer.
Cue Twilight Zone music :)
Sent from my Verizon, Samsung Galaxy smartphone
I double checked the md-380.emu and then rebooted. After that, it worked again without jack hammer.
Cue Twilight Zone music :)
Sent from my Verizon, Samsung Galaxy smartphone
|
By
Chris K7AZ
·
#4880
·
|
|
Re: YSFN -- > Wires X Not keying up
It was just a 20 second test because I know that one worked. Sorry for any inconvenience, nobody was talking.
It was just a 20 second test because I know that one worked. Sorry for any inconvenience, nobody was talking.
|
By
Skyler Fennell
·
#4879
·
|
|
Re: Jackhammer Sound
Hi,
Sometimes it helped me solve this problem with changing the port of md380 from 2470 to for example 2450
The port number is defined in
Hi,
Sometimes it helped me solve this problem with changing the port of md380 from 2470 to for example 2450
The port number is defined in
|
By
SP2ONG Waldek
·
#4878
·
|
|
Re: Jackhammer Sound
Hi Steve,
Also battling the jackhammer thing.
Can you send clip of A_B.ini showing where to disable the MD380?
Thanks,
Chris K7AZ
Sent from my Verizon, Samsung Galaxy smartphone
Hi Steve,
Also battling the jackhammer thing.
Can you send clip of A_B.ini showing where to disable the MD380?
Thanks,
Chris K7AZ
Sent from my Verizon, Samsung Galaxy smartphone
|
By
Chris K7AZ
·
#4877
·
|
|
Re: YSFN -- > Wires X Not keying up
Why are you bridging anything to SD all star hub ysfreflector or dmr without permission. Thank you charles WV8CW
Why are you bridging anything to SD all star hub ysfreflector or dmr without permission. Thank you charles WV8CW
|
By
Charles Wiant
·
#4876
·
|
|
Re: YSFN -- > Wires X Not keying up
The update did fix it. This was a bug in MMDVM_Bridge.
Can someone tell me exactly what the bug was and why it caused some radios to not hear the signal through? Just because I am curios Does anybody
The update did fix it. This was a bug in MMDVM_Bridge.
Can someone tell me exactly what the bug was and why it caused some radios to not hear the signal through? Just because I am curios Does anybody
|
By
Skyler Fennell
·
#4875
·
|
|
Re: YSFN -- > Wires X Not keying up
I'm still on Debian Jessie. I need to update at some point
I got it to work with this command:
wget libstdc++6
I'm still on Debian Jessie. I need to update at some point
I got it to work with this command:
wget libstdc++6
|
By
Skyler Fennell
·
#4874
·
|
|
Re: YSFN -- > Wires X Not keying up
No it is not. Show output of uname -a and which binary you are running. Also output of cat /etc/debian.version
Sent via smoke signal (AT&T)
No it is not. Show output of uname -a and which binary you are running. Also output of cat /etc/debian.version
Sent via smoke signal (AT&T)
|
By
Steve N4IRS
·
#4873
·
|
|
Re: YSFN -- > Wires X Not keying up
Is there source code available so I can compile myself? I am not able to run the latest versions due to this error--
usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.21' not found
Is there source code available so I can compile myself? I am not able to run the latest versions due to this error--
usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.21' not found
|
By
Skyler Fennell
·
#4872
·
|
|
Re: YSFN -- > Wires X Not keying up
Use the latest version of Analog_Bridge and MMDVM_Bridge.
Use the latest version of Analog_Bridge and MMDVM_Bridge.
|
By
Ernie Gm7kbk
·
#4871
·
|
|
YSFN -- > Wires X Not keying up
I am running an RF link to bridge YSFReflector to WIRES-X.
This RF link consists of a Pi-Star based image with a MCS2000 Radio as the link radio to convert between YSF and Wires X.
I have a
I am running an RF link to bridge YSFReflector to WIRES-X.
This RF link consists of a Pi-Star based image with a MCS2000 Radio as the link radio to convert between YSF and Wires X.
I have a
|
By
Skyler Fennell
·
#4870
·
|
|
Re: HBlink3 OB use
Sorry I just realized i put this in the wrong section
Sorry I just realized i put this in the wrong section
|
By
area51now@...
·
#4869
·
|
|
HBlink3 OB use
Hello all have got stuck on getting the openbridge working, Branmister confirmed they see my connection but as of yet I am not able to get any traffic too or from BM, I was hoping one of the experts
Hello all have got stuck on getting the openbridge working, Branmister confirmed they see my connection but as of yet I am not able to get any traffic too or from BM, I was hoping one of the experts
|
By
area51now@...
·
#4868
·
|
|
Re: Transcoders Per Linux Box?
Chris,
There is no fixed limit. Depends on CPU, Memory etc. I would say a decent host could run more then you would need.
Chris,
There is no fixed limit. Depends on CPU, Memory etc. I would say a decent host could run more then you would need.
|
By
Steve N4IRS
·
#4867
·
|
|
Transcoders Per Linux Box?
Curios how many transcoders can be implemented in na Linux ASL box?
I am assuming different internal ports would be needed for each one?
Thank you,
Chris K7AZ
DMR AARG - ASL 29837 so far…
Curios how many transcoders can be implemented in na Linux ASL box?
I am assuming different internal ports would be needed for each one?
Thank you,
Chris K7AZ
DMR AARG - ASL 29837 so far…
|
By
Chris K7AZ
·
#4866
·
|
|
Re: MMDVM_Bridge and Analog_Bridge log file name and timezone changes possible?
Well,
It make no sense to me to restart asterisk when rotating the AB log. AB does not need a restart, so why bother?
postrotate
/usr/sbin/asterisk -rx 'logger reload' >
Well,
It make no sense to me to restart asterisk when rotating the AB log. AB does not need a restart, so why bother?
postrotate
/usr/sbin/asterisk -rx 'logger reload' >
|
By
Steve N4IRS
·
#4865
·
|