|
Re: MMDVM_BRIDGE and connect to XLX selected Module
#mmdvm_bridge
Wait, I see the confusion. Even I get a little mixed up here. I was reading the DMRGateway config. Oops.
Try this for MB:
[DMR Network]
Enable=1
Address=[xlx server
Wait, I see the confusion. Even I get a little mixed up here. I was reading the DMRGateway config. Oops.
Try this for MB:
[DMR Network]
Enable=1
Address=[xlx server
|
By
Steve KC1AWV
·
#4980
·
|
|
Re: MMDVM_BRIDGE and connect to XLX selected Module
#mmdvm_bridge
> Steve, I wonder why you call the module id's TG's
> I do recognise XLX and openspot accept link id's as group contact protocol, whereas usually they would be private call.
You answered your own
> Steve, I wonder why you call the module id's TG's
> I do recognise XLX and openspot accept link id's as group contact protocol, whereas usually they would be private call.
You answered your own
|
By
Steve KC1AWV
·
#4979
·
|
|
Re: MMDVM_BRIDGE and connect to XLX selected Module
#mmdvm_bridge
Yes, I would like to use MMDVM_BRIDGE to connect the YSF Reflector bridge with the XLX reflector.
I don't want to use DMR Gateway, my idea is to reduce the number of applications that DV audio travels
Yes, I would like to use MMDVM_BRIDGE to connect the YSF Reflector bridge with the XLX reflector.
I don't want to use DMR Gateway, my idea is to reduce the number of applications that DV audio travels
|
By
SP2ONG Waldek
·
#4978
·
|
|
Re: MMDVM_BRIDGE and connect to XLX selected Module
#mmdvm_bridge
XLX modules use TGs in the 4000 range. 4001 for module A, 4002 for module B ... 4026 for module Z if you want to change it on the fly from a radio.
The other option is for MMDVM_Bridge to take the
XLX modules use TGs in the 4000 range. 4001 for module A, 4002 for module B ... 4026 for module Z if you want to change it on the fly from a radio.
The other option is for MMDVM_Bridge to take the
|
By
Steve KC1AWV
·
#4976
·
|
|
Re: bridging ASL, DMR and DSTAR
I like these kinds of projects, ones that make me think! If I take a step back and take a higher level look, these are my thoughts.
If we don't want to fiddle with the Asterisk code, then we have two
I like these kinds of projects, ones that make me think! If I take a step back and take a higher level look, these are my thoughts.
If we don't want to fiddle with the Asterisk code, then we have two
|
By
Steve KC1AWV
·
#4975
·
|
|
Re: bridging ASL, DMR and DSTAR
It's been a long time since I've done anything with Asterisk (I used to manage some phone systems years ago,) but I don't recall being able to easily process audio without making changes to source.
It's been a long time since I've done anything with Asterisk (I used to manage some phone systems years ago,) but I don't recall being able to easily process audio without making changes to source.
|
By
Patrick Perdue
·
#4974
·
|
|
Re: bridging ASL, DMR and DSTAR
I don't see why not. Though you may want to play with the analog audio while it's in ASL before it goes to AB. Generally speaking, if it can be done in asterisk, it can also be done in ASL.
I don't see why not. Though you may want to play with the analog audio while it's in ASL before it goes to AB. Generally speaking, if it can be done in asterisk, it can also be done in ASL.
|
By
Steve KC1AWV
·
#4973
·
|
|
Re: bridging ASL, DMR and DSTAR
Hi Steve:
OK, thanks for that. I'll probably just go with the first option for ease-of-setup. Maybe I'll try it with a soft vocoder before committing to more hardware, since the XLX reflector is
Hi Steve:
OK, thanks for that. I'll probably just go with the first option for ease-of-setup. Maybe I'll try it with a soft vocoder before committing to more hardware, since the XLX reflector is
|
By
Patrick Perdue
·
#4972
·
|
|
Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.
Good Morning. Yes Denny,
You can manually configure the ircddbgateway theme.
open a terminal
sudo ircddbgatewayconfig
Change language locution to English and You can make any correction
Good Morning. Yes Denny,
You can manually configure the ircddbgateway theme.
open a terminal
sudo ircddbgatewayconfig
Change language locution to English and You can make any correction
|
By
EA5GVK Joaquin
·
#4970
·
|
|
MMDVM_BRIDGE and connect to XLX selected Module
#mmdvm_bridge
Hi,
Is it possible connect mmdvm_bridgeto to XLX reflector with the selected module just like DMRgateway?
73 Waldek
Hi,
Is it possible connect mmdvm_bridgeto to XLX reflector with the selected module just like DMRgateway?
73 Waldek
|
By
SP2ONG Waldek
·
#4969
·
|
|
Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.
i registered a C terminal today, not sure if it takes time to propagate?
I noticed the mmdvm had the module set to C.
Also, I have 2 DMR ids not sure if that matters. I tried on both and neither seem
i registered a C terminal today, not sure if it takes time to propagate?
I noticed the mmdvm had the module set to C.
Also, I have 2 DMR ids not sure if that matters. I tried on both and neither seem
|
By
Russell, KV4S
·
#4967
·
|
|
Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.
What is the dplus login call in ircddbgateway ?
Your call shows (USTRUST)
[KV4S ] [K4DSO B][KV4S B] [KV4S B]registered terminals, so those should work in dplus. Seems like a
What is the dplus login call in ircddbgateway ?
Your call shows (USTRUST)
[KV4S ] [K4DSO B][KV4S B] [KV4S B]registered terminals, so those should work in dplus. Seems like a
|
By
Adrian Fewster <vk4tux@...>
·
#4966
·
|
|
Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.
Joaquin,
I'm running your 2.0 image today. Very well done and easy to work with!
I need some D-star help.
on the REF reflectors i'm hearing traffic but my audio is not going over the reflector?
are
Joaquin,
I'm running your 2.0 image today. Very well done and easy to work with!
I need some D-star help.
on the REF reflectors i'm hearing traffic but my audio is not going over the reflector?
are
|
By
Russell, KV4S
·
#4965
·
|
|
Re: dvswitch.ini multiple instances
old thread but I finally figured it out what was causing this almost 8 months later.
the local port on mmdvm_bridge.ini needed to be different based on the mode in use for each instance:
DMR for
old thread but I finally figured it out what was causing this almost 8 months later.
the local port on mmdvm_bridge.ini needed to be different based on the mode in use for each instance:
DMR for
|
By
Russell, KV4S
·
#4964
·
|
|
Re: bridging ASL, DMR and DSTAR
> However, it occurs to me as an audio guy that just connecting ASL directly to DMR with the current bridge as it is wouldn't be the best sounding option, as calls to and from DSTAR would be
> However, it occurs to me as an audio guy that just connecting ASL directly to DMR with the current bridge as it is wouldn't be the best sounding option, as calls to and from DSTAR would be
|
By
Steve KC1AWV
·
#4963
·
|
|
bridging ASL, DMR and DSTAR
Hello everyone:
I currently have a bridge between a Brandmeister DMR talk group and DSTAR via an XLX reflector, using a remotely connected machine running ambed with two ThumbDV dongles.
I am
Hello everyone:
I currently have a bridge between a Brandmeister DMR talk group and DSTAR via an XLX reflector, using a remotely connected machine running ambed with two ThumbDV dongles.
I am
|
By
Patrick Perdue
·
#4962
·
|
|
DVSwitch DMR TGID dropped
I have an ASL to DMR instance of DVSwitch and even though the log says it's sending the correct TGID, the HBLink master on the other side only sees TGID 0.
DVSwitch MMDVM: Begin TX: src=3134293
I have an ASL to DMR instance of DVSwitch and even though the log says it's sending the correct TGID, the HBLink master on the other side only sees TGID 0.
DVSwitch MMDVM: Begin TX: src=3134293
|
By
Bill N2WNS
·
#4961
·
|
|
Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.
Hey Joaquin!
Nice job on the DVSwitch image. I gave it a try and everything works beautifully! I only wish that the voice for DSTAR was in English but Maybe it’s time for me to learn some spanish.
Hey Joaquin!
Nice job on the DVSwitch image. I gave it a try and everything works beautifully! I only wish that the voice for DSTAR was in English but Maybe it’s time for me to learn some spanish.
|
By
DigiCommCafe - KD5DLJ - Dennyj
·
#4960
·
|
|
Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.
New Version 2.0 Image DVSwitch Server ( format .img microsd 16gb).
English and Spanish Version
https://mega.nz/#!mwYREKia!AF6MPV3g3223dA1CPPc00HttVTAIjTDgTqzm4W3RHwE
English
New Version 2.0 Image DVSwitch Server ( format .img microsd 16gb).
English and Spanish Version
https://mega.nz/#!mwYREKia!AF6MPV3g3223dA1CPPc00HttVTAIjTDgTqzm4W3RHwE
English
|
By
EA5GVK Joaquin
·
#4959
·
|
|
Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.
What is the status of the English version?
What is the status of the English version?
|
By
Cal N9KO
·
#4958
·
|