|
Re: Trying to get HBlink to connect to Brandmeister without success:
#hblink
I will see if I can get someone to look into this for you. I must apologize I haven’t been active for a few months now and have not been adding connections to 3102. I will see if I can get someone
I will see if I can get someone to look into this for you. I must apologize I haven’t been active for a few months now and have not been adding connections to 3102. I will see if I can get someone
|
By
Corey Dean N3FE <n3fe@...>
·
#5342
·
|
|
Re: Analog_Bridge stops bridging
The power supply is 4A. Temperature is hanging out around 35 degrees C with active cooling.
The power supply is 4A. Temperature is hanging out around 35 degrees C with active cooling.
|
By
Patrick Perdue
·
#5341
·
|
|
Re: Analog_Bridge stops bridging
Check your power supply it needs to be 2 amps or greater. Also Pi do not like the heat. Use cooling fan and heatsinks.
Get Outlook for Android
Check your power supply it needs to be 2 amps or greater. Also Pi do not like the heat. Use cooling fan and heatsinks.
Get Outlook for Android
|
By
Ernie Gm7kbk
·
#5340
·
|
|
Re: Trying to get HBlink to connect to Brandmeister without success:
#hblink
Hi Corey
Thanks for the information. I see the reason now. First of all, I requested an openbridge on 25-Jul-19. The request was canceled and then I made another request on 01-Nov-19 with the number
Hi Corey
Thanks for the information. I see the reason now. First of all, I requested an openbridge on 25-Jul-19. The request was canceled and then I made another request on 01-Nov-19 with the number
|
By
Carlos Minguela
·
#5339
·
|
|
Re: Trying to get HBlink to connect to Brandmeister without success:
#hblink
Well there you have it. I put my request in weeks ago.
Thanks for the clarification Corey.
--
Jay Spaulding
W0JAY CVE
www.8ing.org or www.w0jay.com
HamShack Hotline Ext. 4153
THE GUILD World Wide
Well there you have it. I put my request in weeks ago.
Thanks for the clarification Corey.
--
Jay Spaulding
W0JAY CVE
www.8ing.org or www.w0jay.com
HamShack Hotline Ext. 4153
THE GUILD World Wide
|
By
Jay Spaulding
·
#5338
·
|
|
Analog_Bridge stops bridging
Hi:
I have Analog_Bridge and MMDVM_Bridge running on a Debian Stretch VPS. Analog_Bridge is connected to a remote DV3000 dongle hosted on a Raspberry Pi at my house. Pings between my house and
Hi:
I have Analog_Bridge and MMDVM_Bridge running on a Debian Stretch VPS. Analog_Bridge is connected to a remote DV3000 dongle hosted on a Raspberry Pi at my house. Pings between my house and
|
By
Patrick Perdue
·
#5337
·
|
|
Re: Trying to get HBlink to connect to Brandmeister without success:
#hblink
You arent connecting because I blocked you and two others. I am requesting you request a openbridge connection Using the bm support email support@....
Having 20 plus connections as a user from
You arent connecting because I blocked you and two others. I am requesting you request a openbridge connection Using the bm support email support@....
Having 20 plus connections as a user from
|
By
Corey Dean N3FE <n3fe@...>
·
#5336
·
|
|
Re: Trying to get HBlink to connect to Brandmeister without success:
#hblink
Can try another server.
Here is what mine top looks like little different from yours.
[BrandMeister]
MODE: PEER
ENABLED: True
LOOSE: True
EXPORT_AMBE: False
IP:
PORT: 42031
MASTER_IP:
Can try another server.
Here is what mine top looks like little different from yours.
[BrandMeister]
MODE: PEER
ENABLED: True
LOOSE: True
EXPORT_AMBE: False
IP:
PORT: 42031
MASTER_IP:
|
By
Jay Spaulding
·
#5335
·
|
|
Trying to get HBlink to connect to Brandmeister without success:
#hblink
Hello, for a week now my HBlink has not been able to connect with BM. No changes have been made to the system. This is the log and configuration. Have any of you had a similar situation? Thanks for
Hello, for a week now my HBlink has not been able to connect with BM. No changes have been made to the system. This is the log and configuration. Have any of you had a similar situation? Thanks for
|
By
Carlos Minguela
·
#5334
·
|
|
Re: Analog_Bridge remote control (TLV) commands exposed.
Heiko,
Yes, you know that this is not a problem for me :-) but many users do not know all the DVSwitch elements so precisely and that's why I pay attention
73 Waldek
Heiko,
Yes, you know that this is not a problem for me :-) but many users do not know all the DVSwitch elements so precisely and that's why I pay attention
73 Waldek
|
By
SP2ONG Waldek
·
#5333
·
|
|
Re: Analog_Bridge remote control (TLV) commands exposed.
Yes, but it's very easy for us to change dvswitch.sh and avoid the problem alltogether.
Yes, but it's very easy for us to change dvswitch.sh and avoid the problem alltogether.
|
By
Steve N4IRS
·
#5332
·
|
|
Re: Analog_Bridge remote control (TLV) commands exposed.
It's not really a problem. The ports in hbmonitor and hblink3 can be changed simply. I'm running here 3 instances of hblink3 and 3 instaces of hbmonitor at the same server. In this case you need
It's not really a problem. The ports in hbmonitor and hblink3 can be changed simply. I'm running here 3 instances of hblink3 and 3 instaces of hbmonitor at the same server. In this case you need
|
By
Heiko DL1BZ
·
#5331
·
|
|
Re: Analog_Bridge remote control (TLV) commands exposed.
dvswitch.sh will be able to change DMRID and callsign. Next revision (or so)
Steve N4IRS
dvswitch.sh will be able to change DMRID and callsign. Next revision (or so)
Steve N4IRS
|
By
Steve N4IRS
·
#5330
·
|
|
Re: Analog_Bridge remote control (TLV) commands exposed.
Yes, it could happen. HTTP is only one way to transfer files but we will move the port.
Thanks, Steve N4IRS
Yes, it could happen. HTTP is only one way to transfer files but we will move the port.
Thanks, Steve N4IRS
|
By
Steve N4IRS
·
#5329
·
|
|
Re: Analog_Bridge remote control (TLV) commands exposed.
Steve
Looking through the dvswitch.sh file I see that it uses SimpleHTTPServer on port 9000. Many people use Analog_Bridge on the same computer as they have HBlink3 and HBmonitor which uses port
Steve
Looking through the dvswitch.sh file I see that it uses SimpleHTTPServer on port 9000. Many people use Analog_Bridge on the same computer as they have HBlink3 and HBmonitor which uses port
|
By
SP2ONG Waldek
·
#5328
·
Edited
|
|
Re: Analog_Bridge remote control (TLV) commands exposed.
Steve
I have start with send EmCom info via USRP Ananlog_Bridge and it will be useful possible use dvswitch.sh script to change DMR ID in "gatewayDmrId"
73 Waldek
Steve
I have start with send EmCom info via USRP Ananlog_Bridge and it will be useful possible use dvswitch.sh script to change DMR ID in "gatewayDmrId"
73 Waldek
|
By
SP2ONG Waldek
·
#5327
·
Edited
|
|
Re: DMR to YSF Weird Issue
You’re the best Steve..
That all works perfectly now..
Thanks again..
Walter/K5WH
You’re the best Steve..
That all works perfectly now..
Thanks again..
Walter/K5WH
|
By
Walter Holmes K5WH
·
#5326
·
|
|
Re: DMR to YSF Weird Issue
Walter,
The reason the file has a extension is so that people can determine which file they need for their architecture. You can rename the file so that it matches your service.
I put
Walter,
The reason the file has a extension is so that people can determine which file they need for their architecture. You can rename the file so that it matches your service.
I put
|
By
Steve N4IRS
·
#5325
·
|
|
Re: DMR to YSF Weird Issue
Steve,
To have this run as a service now, should I rename the MMMDVM_Bridge.amd64 file as MMMDVM_Bridge, so I can restart the mmdvm_bridge service?
Or is there an easier way to have the
Steve,
To have this run as a service now, should I rename the MMMDVM_Bridge.amd64 file as MMMDVM_Bridge, so I can restart the mmdvm_bridge service?
Or is there an easier way to have the
|
By
Walter Holmes K5WH
·
#5324
·
|
|
Re: DMR to YSF Weird Issue
yes, that works now Steve..
many thanks,
yes, that works now Steve..
many thanks,
|
By
Walter Holmes K5WH
·
#5323
·
|