|
Bad audio from analog_bridge
Hi all,
I trying to broadcast our club bm tg to broadcastify. I installed mmdvm_bridge, analog_bridge and md380-emu as I don’t have ambe dongle. I’m monitoring the audio output with nc -l -u -p
Hi all,
I trying to broadcast our club bm tg to broadcastify. I installed mmdvm_bridge, analog_bridge and md380-emu as I don’t have ambe dongle. I’m monitoring the audio output with nc -l -u -p
|
By
JF
·
#5562
·
|
|
Re: Linking dmrlink and HBlink3
#dmrlink
#hblink
That is what I thought as I have seen active negotiation in previous iterations of this config as I do still see in the file where I created a peer connecting back to the current Moto 5700 master. I
That is what I thought as I have seen active negotiation in previous iterations of this config as I do still see in the file where I created a peer connecting back to the current Moto 5700 master. I
|
By
ai6bx
·
#5561
·
|
|
Re: Linking dmrlink and HBlink3
#dmrlink
#hblink
The telling thing here is what I do NOT see. I don’t see a repeater trying to connect at all. There’s nothing here to diagnose until we at least see a repeater trying to connect to it.
For
The telling thing here is what I do NOT see. I don’t see a repeater trying to connect at all. There’s nothing here to diagnose until we at least see a repeater trying to connect to it.
For
|
By
Cort N0MJS <n0mjs@...>
·
#5560
·
|
|
Re: Linking dmrlink and HBlink3
#dmrlink
#hblink
Court,
I have stripped back to a single system in the DMRlink.cfg file however it is not linking with the DMR repeater I have operating in peer mode. Previously, last week, this was working
Court,
I have stripped back to a single system in the DMRlink.cfg file however it is not linking with the DMR repeater I have operating in peer mode. Previously, last week, this was working
|
By
ai6bx
·
#5559
·
|
|
Re: Im Lost...
There are a number of tutorials out there. To be honest, I’ve not paid attention to a lot of them. When I helped clean up the how-to last week, I realized that, while a lot of the things out there
There are a number of tutorials out there. To be honest, I’ve not paid attention to a lot of them. When I helped clean up the how-to last week, I realized that, while a lot of the things out there
|
By
Cort N0MJS <n0mjs@...>
·
#5558
·
|
|
Re: Im Lost...
This guy made a very good YouTube and article series on how to do it:
http://www.chrishoodblog.com/make-your-own-dmr-server/
This guy made a very good YouTube and article series on how to do it:
http://www.chrishoodblog.com/make-your-own-dmr-server/
|
By
Skyler Fennell
·
#5557
·
|
|
Re: Im Lost...
I wanna say i was there but cant be certain for sure... i started this project yesterday @ 7:30am its now almost 10am the next day. i appreciate the nudge i know i can do this i know im just missing
I wanna say i was there but cant be certain for sure... i started this project yesterday @ 7:30am its now almost 10am the next day. i appreciate the nudge i know i can do this i know im just missing
|
By
sean.riddle@...
·
#5556
·
|
|
Re: Im Lost...
You should be over on the HBlink subgroup. We posted step-by-step install instructions there just last week.
Cort Buffington
785-865-7206
You should be over on the HBlink subgroup. We posted step-by-step install instructions there just last week.
Cort Buffington
785-865-7206
|
By
Cort N0MJS <n0mjs@...>
·
#5555
·
|
|
Im Lost...
I have been beating my head off the wall over this and i feel like i am so close i can hear it....
i got a jumbo spot and a nice gd77 im trying to make... i guess... a Ad-Hoc DMR network NO
I have been beating my head off the wall over this and i feel like i am so close i can hear it....
i got a jumbo spot and a nice gd77 im trying to make... i guess... a Ad-Hoc DMR network NO
|
By
sean.riddle@...
·
#5554
·
|
|
Simplify script USRPAudio.py for monitoring audio only. #analog_bridge #USRPAudio.py
#analog_bridge
Hi all,
Firstly I'm not sure that my question is acceptable on this group ... but I do not see what subgroup would be more appropriate (it may be missing a subgroup "stupid questions> / dev / null"
Hi all,
Firstly I'm not sure that my question is acceptable on this group ... but I do not see what subgroup would be more appropriate (it may be missing a subgroup "stupid questions> / dev / null"
|
By
Philippe, f5rvx
·
#5553
·
|
|
Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.
Hi Ken
I have trying to install from scratch but nothing work.
Could tell me th complete process u use for installing from scratch.
73 Raymond F6JIG
Envoyé depuis mon smartphone.
Hi Ken
I have trying to install from scratch but nothing work.
Could tell me th complete process u use for installing from scratch.
73 Raymond F6JIG
Envoyé depuis mon smartphone.
|
By
mfj_986
·
#5552
·
|
|
Re: Disconnection after 45 seconds
Mike,
Great news. Thanks for the update.
Steve
Sent via smoke signal (AT&T)
Mike,
Great news. Thanks for the update.
Steve
Sent via smoke signal (AT&T)
|
By
Steve N4IRS
·
#5550
·
|
|
Re: Disconnection after 45 seconds
Hi Steve
Just an update. Thru trial and error I discovered the problem is Telstra my internet provider which apparently is blocking Port 46001 on the cellist network. Because I Changed the SIM card to
Hi Steve
Just an update. Thru trial and error I discovered the problem is Telstra my internet provider which apparently is blocking Port 46001 on the cellist network. Because I Changed the SIM card to
|
By
VK4SED
·
#5549
·
Edited
|
|
Re: traffic from XLX breaks the bridge
Patrick,
Good to hear your issue is solved. Please, the next time you have a issue and someone is walking you through troubleshooting, let someone know you are going in another troubleshooting
Patrick,
Good to hear your issue is solved. Please, the next time you have a issue and someone is walking you through troubleshooting, let someone know you are going in another troubleshooting
|
By
Steve N4IRS
·
#5548
·
|
|
Re: traffic from XLX breaks the bridge
Well, the root cause has been identified and fixed. Apparently, Brandmeister did actually give me that interlink I asked for months ago, but I never got a notification about it. This was breaking
Well, the root cause has been identified and fixed. Apparently, Brandmeister did actually give me that interlink I asked for months ago, but I never got a notification about it. This was breaking
|
By
Patrick Perdue
·
#5547
·
|
|
Re: traffic from XLX breaks the bridge
XLX log:
I: 2019-12-01 19:02:46.038 MMDVM_Bridge:
I: 2019-12-01 19:02:46.038 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-12-01 19:02:46.038 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-12-01
XLX log:
I: 2019-12-01 19:02:46.038 MMDVM_Bridge:
I: 2019-12-01 19:02:46.038 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-12-01 19:02:46.038 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-12-01
|
By
Patrick Perdue
·
#5546
·
|
|
Re: traffic from XLX breaks the bridge
One more time:
Stop both MB_BM and MB_XLX
Clear both logs
Start MB_XLX
Start MB_BM
Send one transmission through reflector
Stop MB_XLX
Stop MB_BM
Paste both logs
One more time:
Stop both MB_BM and MB_XLX
Clear both logs
Start MB_XLX
Start MB_BM
Send one transmission through reflector
Stop MB_XLX
Stop MB_BM
Paste both logs
|
By
Steve N4IRS
·
#5545
·
|
|
Re: traffic from XLX breaks the bridge
Oh, doink.
My clipboard must not have gotten updated.
XLX log for real this time:
I: 2019-12-01 18:45:51.187 MMDVM_Bridge:
I: 2019-12-01 18:45:51.187 Portions Copyright (C) 2018 DVSwitch, INAD.
I:
Oh, doink.
My clipboard must not have gotten updated.
XLX log for real this time:
I: 2019-12-01 18:45:51.187 MMDVM_Bridge:
I: 2019-12-01 18:45:51.187 Portions Copyright (C) 2018 DVSwitch, INAD.
I:
|
By
Patrick Perdue
·
#5544
·
|
|
Re: traffic from XLX breaks the bridge
That is the BM log
I: 2019-12-01 18:46:24.440 Address: 3101.repeater.net
I: 2019-12-01 18:46:24.440 Port: 62031
That is the BM log
I: 2019-12-01 18:46:24.440 Address: 3101.repeater.net
I: 2019-12-01 18:46:24.440 Port: 62031
|
By
Steve N4IRS
·
#5543
·
|
|
Re: traffic from XLX breaks the bridge
XLX log:
I: 2019-12-01 18:45:51.187 MMDVM_Bridge:
I: 2019-12-01 18:45:51.187 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-12-01 18:45:51.187 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-12-01
XLX log:
I: 2019-12-01 18:45:51.187 MMDVM_Bridge:
I: 2019-12-01 18:45:51.187 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2019-12-01 18:45:51.187 Hacks by Mike N4IRR and Steve N4IRS
I: 2019-12-01
|
By
Patrick Perdue
·
#5542
·
|